From: Oleksij Rempel <linux@rempel-privat.de>
Date: Sun, 6 Aug 2017 05:58:31 +0000 (+0200)
Subject: board: tp-link_tl-mr3020: add ath79 support
X-Git-Tag: v0.11.0-rc1~1339
X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=f441f58ad6e58aefd3045810371d432acbd5b0f8;hp=f712098323c46213a7658f6b91b3775055bc6d6a

board: tp-link_tl-mr3020: add ath79 support

Finally we can use this driver by default!

Change-Id: I09d215d1bd1dc16873a7379637e6869af65ad8f1
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4193
Tested-by: jenkins
Reviewed-by: Dmytro <dioptimizer@hotmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
---

diff --git a/tcl/board/tp-link_tl-mr3020.cfg b/tcl/board/tp-link_tl-mr3020.cfg
index b7d8d5b615..7e040b3253 100644
--- a/tcl/board/tp-link_tl-mr3020.cfg
+++ b/tcl/board/tp-link_tl-mr3020.cfg
@@ -42,3 +42,5 @@ $_TARGETNAME configure -event reset-init {
 
 set ram_boot_address 0xa0000000
 $_TARGETNAME configure -work-area-phys 0xa1FFE000 -work-area-size 0x1000
+
+flash bank flash0 ath79 0 0 0 0 $_TARGETNAME cs0