From: Paul Fertser Date: Mon, 30 Dec 2013 18:26:36 +0000 (+0400) Subject: tcl: add bcm47xx config and Asus RT-N16 board using it X-Git-Tag: v0.8.0-rc1~138 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=faedb1477292dda20267adbdcf6536da3ec77502;hp=faedb1477292dda20267adbdcf6536da3ec77502 tcl: add bcm47xx config and Asus RT-N16 board using it This adds the bcm47xx config with the special undocumented trick to put it into standard EJTAG mode from the mystic "LV mode". The RAM setup is not done as it would require considerable efforts without much practical gain. The only issue I noticed so far is that "reset" doesn't actually reset the chip. Unfortunately, it's unclear how to make it work properly with SRST as OpenOCD asserts it in MIPS-specific code so the device will enter LV mode again but the LV tap is already disabled by that time, so it's not possible to send the magic command again. Anyway, this config is more than enough to "recover" any RT-N16 provided the hardware is not damaged. Change-Id: I0894e339763e6d20d1c93341c597382b479d039b Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/1849 Tested-by: jenkins Reviewed-by: Spencer Oliver ---