From: Øyvind Harboe Date: Tue, 4 May 2010 05:25:30 +0000 (+0200) Subject: cfi: made som info output debug output X-Git-Tag: v0.5.0-rc1~730 X-Git-Url: https://review.openocd.org/gitweb?p=openocd.git;a=commitdiff_plain;h=fe60480b7a8f5c94147e3185bae235241c33c9ce cfi: made som info output debug output E.g. how much target memory that is used during flashing is debug info. Signed-off-by: Øyvind Harboe --- diff --git a/src/flash/nor/cfi.c b/src/flash/nor/cfi.c index a64d78f557..f88f16c81a 100644 --- a/src/flash/nor/cfi.c +++ b/src/flash/nor/cfi.c @@ -1141,7 +1141,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, uint3 busy_pattern_val = cfi_command_val(bank, 0x80); error_pattern_val = cfi_command_val(bank, 0x7e); - LOG_INFO("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size); + LOG_DEBUG("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32, source->address, buffer_size); /* Programming main loop */ while (count > 0) @@ -1162,7 +1162,7 @@ static int cfi_intel_write_block(struct flash_bank *bank, uint8_t *buffer, uint3 buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val); buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val); - LOG_INFO("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address); + LOG_DEBUG("Write 0x%04" PRIx32 " bytes to flash at 0x%08" PRIx32 , thisrun_count, address); /* Execute algorithm, assume breakpoint for last instruction */ retval = target_run_algorithm(target, 0, NULL, 7, reg_params,