split nand.c into nand/{core,fileio,tcl}.c
[openocd.git] / tcl /
2009-12-01 David BrownellTcl and doc: update to match new 'arm mcr ...' etc
2009-12-01 Øyvind Harboetarget: at91eb40a.cfg is a board, not a target.
2009-11-29 Marek Vasutcreate target/pxa3xx.cfg
2009-11-28 David Brownellomap3530.cfg: use new "reset-assert" event
2009-11-26 David Brownellomap3530.cfg: yes we have SRAM!
2009-11-23 Øyvind Harboearm926ejs: fix gaffe when converting from arm926ejs...
2009-11-23 Øyvind Harboearm926ejs: retire cp15 commands, handled by mrc/mcr.
2009-11-20 David Brownelltarget.cfg: TAP id for Hilscher netX 500
2009-11-19 Zachary T Welchupdate 'nand device' usage in scripts
2009-11-19 Zachary T Welchupdate 'flash bank' usage in scripts
2009-11-17 David BrownellARM: "armv4_5" command prefix becomes "arm"
2009-11-14 David BrownellARM11: ETM + ETB support
2009-11-14 David BrownelliMX2* + ETB targets: hook up ETM and ETB
2009-11-13 David Brownelltarget.cfg: label ETBs correctly
2009-11-10 David Brownelltarget.cfg: (re)move some bogus reset_config lines
2009-11-10 Thomas Kindlerstm32.cfg: remove reset_config
2009-11-10 Øyvind HarboeARM11: remove old mrc/mcr commands
2009-11-10 Øyvind Harboetelo.cfg: fix search paths
2009-11-09 David Brownellfinish removing deprecated/obsolete commands
2009-11-08 David Brownelltarget.cfg: remove "-work-area-virt 0"
2009-11-05 Krzysztof KajsturaJTAG: support KT-LINK adapter
2009-11-05 David BrownellPXA255: support Intel "Lubbock" platform
2009-11-01 Freddie Chopinremove "-ircapture 0x1 -irmask 0x1" from stm32.cfg
2009-10-31 Freddie Chopintarget.cfg: use $_TARGETNAME for flash
2009-10-29 Dimitar DimitrovOlimex FT2232H JTAG adapters
2009-10-27 Oleg SeiljusSignalyzer: H2 and H4 support
2009-10-27 Oleg SeiljusSignalyzer: new config files
2009-10-27 David BrownellPXA255: force reset config
2009-10-27 David Brownellomap3530: target reset/init improvements
2009-10-26 Spencer OliverFix incorrect line endings
2009-10-26 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-26 Wookeyballoon3 board base config
2009-10-25 Øyvind Harboefix syntax of mww phys.
2009-10-21 Øyvind Harboemww_phys retired. Replaced by generic mww phys in target.c
2009-10-20 Øyvind HarboeAdded the faux flash driver and target. Used for testing.
2009-10-20 David Brownelldavinci: add watchdog reset method
2009-10-18 Dean GlazeskiSDRAM and clock configuration for the SAM9-L9260 board...
2009-10-14 WookeyFw: [PATCH] OpenRD board configuration
2009-10-14 Øyvind HarboeiMX target config script's ported from Freescale BSP.
2009-10-14 David Brownellomap2420.cfg updates
2009-10-13 Øyvind Harboearm11 seems to gate JTAG when srst is asserted
2009-10-12 WookeyXilinx xcr3256.cfg basic config script
2009-10-12 Øyvind Harboeburst writes work fine. clean up junk.
2009-10-12 Øyvind HarboeMerge commit 'origin/master'
2009-10-12 Øyvind HarboeSupply default reset_config statement to make target...
2009-10-10 WookeyFix reset delays and tinker with ID's
2009-10-09 Øyvind HarboeMerge commit 'origin/master'
2009-10-09 Øyvind HarboeAdded tip in documentation on how to translate quirky...
2009-10-09 David Brownellmake PXA255 targets enumerate sort-of-OK
2009-10-09 Rabeeh KhouryFunction to flash SheevaPlug u-boot sectors
2009-10-08 David Brownellinitial builds of OSK5912 boards need srst_pulls_trst
2009-10-08 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-08 David Brownellmake OMAP5912 resets more reliable
2009-10-08 John RigbyiMX25 target support
2009-10-07 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-07 oharboefirst stab at imx35 reset init script
2009-10-07 oharboeremove recrusive reset invocation from reset init callback
2009-10-06 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-06 dbrownellAdd basic support for DM6446 EVM board.
2009-10-06 dbrownellDragonite target script
2009-10-06 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-06 oharboestop using targetnum
2009-10-05 David BrownellMerge branch 'master' of ssh://dbrownell@openocd.git...
2009-10-05 dbrownellAdd a new JTAG "setup" event; use for better DaVinci...
2009-10-05 dbrownellGet rid of needless OMAP and Davinci target config...
2009-10-02 mluUpdated reset event handling in omap3530 cfg
2009-09-30 dbrownellRemove annoying EOL whitespace (again, sigh).
2009-09-30 oharboestrip gdb config options
2009-09-30 oharboemichal smulski <michal.smulski@ooma.com> reset now...
2009-09-27 dbrownellDon't provide invalid OMAP5912 IR capture value/mask...
2009-09-26 dbrownellOn DM355 EVM board, associate NAND chips with $_TARGETNAME
2009-09-25 dbrownellUpdate DM355 target config to know about ICEpick.
2009-09-25 oharboeMichael Hasselberg <mh@open-engineering.de> target...
2009-09-21 dbrownellRemove annoying end-of-line whitespace from tcl/* files
2009-09-21 oharboeEthan Eade <ethan@evolution.com> board config script...
2009-09-21 dbrownellEnsure that DaVinci chips can't start with a too-fast...
2009-09-19 mluReduced sleep time after reset
2009-09-18 mluMove Cortex A8 debug access initialisation from omap353...
2009-09-16 oharboeRolf Meeser <rolfm_9dq@yahoo.de> adds flash support...
2009-09-13 oharboeMagnus Lundin <lundin@mlu.mine.nu> Disable poll while...
2009-09-12 oharboeDavid Brownell <david-b@pacbell.net>
2009-09-11 oharboetap post reset event added. Allows omap3530 to send...
2009-09-11 ntfreak- revert change made to sheevaplug.cfg in rev2573
2009-09-11 oharboesyntax error fix
2009-09-10 oharboemichal smulski <michal.smulski@ooma.com> telo target...
2009-09-04 oharboeuse "armv4_5 core_state arm" instead of soft_reset_halt...
2009-09-04 oharboeDirk Behme <dirk.behme@googlemail.com> retire jtag_spee...
2009-09-04 oharboeDirk Behme <dirk.behme@googlemail.com> Add default...
2009-09-04 oharboeset ARM mode using explicit command rather than soft_re...
2009-09-04 oharboeDavid Brownell <david-b@pacbell.net> "set _TARGETNAME...
2009-09-04 oharboeDavid Claffey <dnclaffey@gmail.com> get rid of reset...
2009-09-02 oharboeDavid Claffey <dnclaffey@gmail.com> tested with the...
2009-09-02 duaneCrusty Code fixes from the tcl directory re-arragements
2009-08-31 oharboeGary Carlson <gcarlson@carlson-minot.com> config file
2009-08-31 oharboeFerdinand Postema <ferdinand@postema.eu> config script...
2009-08-28 oharboeDavid Brownell <david-b@pacbell.net> The Stellaris...
2009-08-25 oharboeFerdinand Postema <ferdinand@postema.eu> increase reset...
2009-08-25 oharboeBrian Findlay <findlaybrian@gmail.com> finalize mini244...
2009-08-25 oharboeuse cortex_a8 instead of cortex_m3
2009-08-21 oharboePieter Conradie <Pieter.Conradie@psitek.com> shuffle...

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)