Øyvind Harboe [Tue, 21 Dec 2010 13:07:17 +0000 (14:07 +0100)]
server: remove error value from LOG_INFO
the error values is not part of the interface to the user,
so they should never be printed in LOG_INFO or LOG_USER.
Printing them in LOG_DEBUG() rarely makes much sense but
is OK.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Tormod Volden [Sun, 19 Dec 2010 22:39:05 +0000 (23:39 +0100)]
tcl/interface/flashlink.cfg: Fix broken ST URL
Tormod Volden [Sun, 19 Dec 2010 22:39:04 +0000 (23:39 +0100)]
tcl/board: Clean up STM32 EVAL boards configurations
Make consistent use of hex memory size for flashing.
Delete stm32f10x_128k_eval.cfg. It has no product reference
nor any settings in it.
Tormod Volden [Sun, 19 Dec 2010 22:39:03 +0000 (23:39 +0100)]
tcl/board: Fix ST URLs in stm32* eval board configuration files
ST recently rewamped (screwed up) their web site and broke all links.
Also match the chip names with those on the web site product
descriptions.
Michael Schwingen [Sun, 19 Dec 2010 15:17:46 +0000 (16:17 +0100)]
update IXP42x target / XBA board config
Michael Trensch [Thu, 16 Dec 2010 14:33:16 +0000 (15:33 +0100)]
Add support for Hilscher netX controllers
Øyvind Harboe [Sat, 18 Dec 2010 09:16:26 +0000 (10:16 +0100)]
script: support only Tcl comments
Only Tcl comments are now supported. For classic style
commands comments were supported at the end of the line.
Move in the direction of letting the script language
decide syntax, rather than have special rules for some
commands.
Before this patch goes in, the scripts should be updated
to use ;# instead of # for end of line comments.
> mdw 0 1 2
mdw ['phys'] address [count]
zy1000.cpu mdw address [count]
Command handler execution failed
in procedure 'mdw'
> mdw 0 1 #2
mdw ['phys'] address [count]
zy1000.cpu mdw address [count]
Command handler execution failed
in procedure 'mdw'
> mdw 0 1 ;#2
0x00000000:
ffffffff
> mdw 0 1
0x00000000:
ffffffff
> mdw 0
0x00000000:
ffffffff
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Antonio Borneo [Sat, 18 Dec 2010 17:22:53 +0000 (01:22 +0800)]
TCL: fix non TCL comments
End of line comments fixed with ';' before '#'.
Added few additional 'space' to keep indentation in
multi-line comments.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Øyvind Harboe [Thu, 16 Dec 2010 08:12:22 +0000 (09:12 +0100)]
openocd doc: update the comments about Jim Tcl a bit
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
John Devereux [Tue, 14 Dec 2010 12:17:01 +0000 (12:17 +0000)]
Fix for compilation failure amt_jtagaccel.c
Hi,
I think there are errors in amt_jtagaccel.c
I attach a small patch that I needed to make it compile.
Paul Richards [Wed, 15 Dec 2010 12:42:03 +0000 (21:42 +0900)]
Fix for segfault in handle_nand_dump_command.
Øyvind Harboe [Tue, 14 Dec 2010 08:26:08 +0000 (09:26 +0100)]
stm32: fix unprotect
the unprotect fn in stm32 needs to unprotect more sectors
than was requested aligned to some boundary.
Print warning when this happens.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 14 Dec 2010 08:29:26 +0000 (09:29 +0100)]
flash: clarify protect documentation
some chips unprotect more than the range asked for. The
protect fn, must unprotect/protect minimally the range given.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Spencer Oliver [Fri, 10 Dec 2010 19:37:39 +0000 (19:37 +0000)]
contrib: add source to the cfi flash loaders
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 9 Dec 2010 16:42:04 +0000 (16:42 +0000)]
contrib: make sure loaders use correct arch
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 8 Dec 2010 17:15:42 +0000 (17:15 +0000)]
stm32: add STM32E-EVAL external memory config script
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 8 Dec 2010 17:11:07 +0000 (17:11 +0000)]
cfi: disable buffer writes for M29W128G
For some reason buffer writes for the M29W128G do not work reliably,
so disable them.
See:
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=
504a3e72208fc6a65924426ff5693982590bccdc
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 8 Dec 2010 17:07:08 +0000 (17:07 +0000)]
cfi: allow optional buffer write support
Some flash's do not support buffer writes, so we now check
they are supported before trying to use them.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 8 Dec 2010 17:04:23 +0000 (17:04 +0000)]
cfi: calculate correct timeouts
The existing code used incorrect timeout values for the various cfi
operations. We now calculate the timeouts and convert to
msecs if necessary.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 8 Dec 2010 16:57:44 +0000 (16:57 +0000)]
cfi: prefix string hex output
Add hex prefix so we know output is not decimal.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 8 Dec 2010 10:57:36 +0000 (10:57 +0000)]
cfi: add time format to cfi query output
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 8 Dec 2010 10:14:15 +0000 (10:14 +0000)]
cfi: whitespace and long line cleanup
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Paul Richards [Wed, 8 Dec 2010 06:48:55 +0000 (15:48 +0900)]
Fix for segmentation fault from freed memory access in jtag_unregister_event_callback()
Freddie Chopin [Sat, 4 Dec 2010 14:45:40 +0000 (15:45 +0100)]
remove srst_pulls_trst from LPC2xxx target scripts
LPC2xxx do not require reset_config srst_pulls_trst. This can cause various "strange" problems when flashing the chip, because "reset halt" actually allows the chip to run for some short period of time and execute some code.
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
Spencer Oliver [Wed, 8 Dec 2010 19:54:10 +0000 (19:54 +0000)]
build: fix build from previous commit
commit
740b9e25b410c164e661d0334a9ea4168406726b broke the drivers
for ftdi and parport due to retval already being defined.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Øyvind Harboe [Mon, 6 Dec 2010 08:21:23 +0000 (09:21 +0100)]
jtag: getting the JTAG speed can fail
If the JTAG speed has not been set, then it has no defined
value, add code to propagate the error.
No change to actual behavior as no new failure paths have
been introduced. This is a no-op patch to make subsequent patches
smaller.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Andrew Leech [Mon, 6 Dec 2010 21:05:56 +0000 (08:05 +1100)]
svf: various improvements
* added support for targeting particular tap
* improved file reading
* improved command line parsing
* added progress meter
* more readable time measurement output
Rolf Meeser [Fri, 3 Dec 2010 13:10:40 +0000 (14:10 +0100)]
lpc2478 target config: CCLK as (mandatory) parameter
Mike Dunn [Thu, 2 Dec 2010 19:08:28 +0000 (11:08 -0800)]
xscale: trace buffer remains enabled until explicitly disabled
Hi everyone,
Since a call went out for patches... been sitting on this for months. For some
reason, the xscale trace buffer is automatically disabled as soon as a break
occurs and the trace data is collected. This patch was a result of the
frustration of always re-enabling it, or else hitting a breakpoint and checking
the trace data, only to discover that I forgot to re-enable it before resuming.
Don't see why it should work this way. There is no run-time penalty, AFAIK.
Along the way, I also cleaned up a little by removing the ugly practice of
recording wrap mode by setting the fill count variable to "-1", replacing it
with an enum that records the trace mode.
I've been using this for months. Comments, criticisms gratefully received.
Mike
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Rolf Meeser [Fri, 3 Dec 2010 13:03:28 +0000 (14:03 +0100)]
Add board config for Embedded Artists LPC2478-32
Rolf Meeser [Fri, 3 Dec 2010 12:54:47 +0000 (13:54 +0100)]
Fix flash name in Hitex LPC2929 board config
Rolf Meeser [Fri, 3 Dec 2010 13:06:11 +0000 (14:06 +0100)]
Fix sector layout for 504-KiB LPC2000 devices
Spencer Oliver [Thu, 2 Dec 2010 13:12:48 +0000 (13:12 +0000)]
stm32: set default soft reset config
If no srst is configured then default to using sysresetreq to
reset the target.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 2 Dec 2010 13:11:08 +0000 (13:11 +0000)]
luminary: remove unused config cmds.
Due to commit
e40aee2954d2beabe1d8c530d9ff1e564fb01f48 we now honour the
targets 'reset_config' setting. Previously we ignored the srst setting
for luminary targets.
Luminary targets have never supported using srst to reset into debug mode
so remove the option from the target configs files.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 2 Dec 2010 12:58:50 +0000 (12:58 +0000)]
cortex_m3: change cortec_m3 reset_config behaviour
Currently the cmd 'cortex_m3 reset_config' will overide the default
target's 'reset_config'.
Chnage the behaviour to use the target 'reset_config' if configured and
fallback if not.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 2 Dec 2010 22:01:44 +0000 (22:01 +0000)]
config: fix luminary jtag config
When this config was updated in commit
e3773e3e3d1f1ee0dbb0b69e8babe8419784d1c1
the old jtag declaration was not removed.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Freddie Chopin [Wed, 1 Dec 2010 21:55:56 +0000 (22:55 +0100)]
rename some target scripts to be consistent with the rest
Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...)
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
Øyvind Harboe [Wed, 1 Dec 2010 14:28:56 +0000 (15:28 +0100)]
profile: use 100Hz as a default sampling frequency
it's a lie that is somewhere in the vicinity of the
truth. Certainly 64MHz confuses gprof and produces
zero output and no error messages.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Rolf Meeser [Wed, 1 Dec 2010 07:28:43 +0000 (08:28 +0100)]
lpc2900.c: Improve debug output for device probing
Rolf Meeser [Wed, 1 Dec 2010 07:22:29 +0000 (08:22 +0100)]
lpc2900.c: Add support for new device LPC2926
Rolf Meeser [Sat, 27 Nov 2010 22:09:59 +0000 (23:09 +0100)]
LPC2900: Avoid false positive reprobing if first probing fails
Piotr Esden-Tempski [Mon, 29 Nov 2010 20:58:30 +0000 (12:58 -0800)]
Some cosmetic fixes to the Lisa/L layout support functions.
Piotr Esden-Tempski [Mon, 29 Nov 2010 20:56:21 +0000 (12:56 -0800)]
Added support for the blinking leds on Floss-JTAG v0.3 and newer.
Piotr Esden-Tempski [Mon, 29 Nov 2010 20:35:39 +0000 (12:35 -0800)]
Updated Floss-JTAG config file to support v0.3 and newer. Also added noeeprom version of the config file for older versions of Floss-JTAG.
Spencer Oliver [Fri, 26 Nov 2010 14:43:44 +0000 (14:43 +0000)]
build: fix make install with jimtcl
Update subproject jimtcl to fix issue with make install.
see jimtcl commit
373b721510fd2d0754a41cc70a3b7cfd02e929bd
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Fri, 26 Nov 2010 13:35:41 +0000 (13:35 +0000)]
build: correct configure help message
As we default to building jimtcl the help text should show that.
No change in functionality or configure args required.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Antonio Borneo [Mon, 22 Nov 2010 04:25:09 +0000 (12:25 +0800)]
FLASH/NOR: Rename spearsmi.c to stmsmi.c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Mon, 22 Nov 2010 04:21:31 +0000 (12:21 +0800)]
FLASH/NOR: rename from spearsmi to stmsmi
STMicroelectronics controller SMI is not SPEAr specific.
Rename it and change name to every symbol in the code.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 03:28:46 +0000 (11:28 +0800)]
STR750: Add SMI interface support
Modified spearsmi driver to include support for STR75x
Added missing initialization in tcl file for STR750
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Thu, 18 Nov 2010 07:01:03 +0000 (15:01 +0800)]
NOR/SPEARSMI: fix segfault
If flash chip is not listed in the table, or if no flash is
connected, pointer must be properly initialized.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Mon, 22 Nov 2010 11:32:57 +0000 (19:32 +0800)]
Documentation: fix typo
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Øyvind Harboe [Mon, 22 Nov 2010 10:16:40 +0000 (11:16 +0100)]
flash: iterating over an address range now handles multiple banks
e.g. flash erase_address now works across an address
range that spans multiple flash chips.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 22 Nov 2010 08:15:47 +0000 (09:15 +0100)]
fastload: fix error handling upon running out of memory
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Spencer Oliver [Fri, 19 Nov 2010 11:53:17 +0000 (11:53 +0000)]
build: remove AC_CONFIG_AUX_DIR macro
This was used during testing and should have been removed.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Fri, 19 Nov 2010 11:24:11 +0000 (11:24 +0000)]
build: disable jimtcl lineedit
This is a recent jimtcl feature but it currently breaks mingw
builds as this system does not have termios.h etc.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Fri, 19 Nov 2010 09:57:37 +0000 (09:57 +0000)]
build: fix subconfigure parameter issue
When passing CFLAGS for example through to the jimtcl subconfigure the
quotes were not being preserved.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Fri, 19 Nov 2010 09:08:09 +0000 (09:08 +0000)]
build: update bootstrap comments
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Fri, 19 Nov 2010 09:07:43 +0000 (09:07 +0000)]
build: prepend --with-jim-ext=nvp to jimtcl configure
This allows us to add options to jimtcl configure.
The default autoconf AC_CONFIG_SUBDIRS does not currently support this.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 17 Nov 2010 10:26:21 +0000 (10:26 +0000)]
build: add autobuild jimtcl to configure scripts
Rather than having to configure/build jimtcl openocd
will do this as part of its own build.
To use an external jimtcl lib specify disable-internal-jimtcl
to the configure step.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Fri, 12 Nov 2010 11:41:55 +0000 (11:41 +0000)]
build: add common.mk
Rather than specifying common makefile variables move
them all to a common.mk.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Antonio Borneo [Wed, 17 Nov 2010 13:28:34 +0000 (21:28 +0800)]
FLASH/NOR: Remove useless file tms470.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 13:25:57 +0000 (21:25 +0800)]
FLASH/NOR: Remove useless file str9xpec.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 13:23:04 +0000 (21:23 +0800)]
FLASH/NOR: Remove useless file str9x.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 13:20:02 +0000 (21:20 +0800)]
FLASH/NOR: Remove useless file str7x.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 13:16:23 +0000 (21:16 +0800)]
FLASH/NOR: Remove useless file stm32x.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 13:12:37 +0000 (21:12 +0800)]
FLASH/NOR: Remove useless file stellaris.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 13:04:37 +0000 (21:04 +0800)]
FLASH/NOR: Remove useless file pic32mx.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 13:00:25 +0000 (21:00 +0800)]
FLASH/NOR: Remove useless file lpc288x.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 12:55:40 +0000 (20:55 +0800)]
FLASH/NOR: Remove useless file lpc2000.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 10:01:07 +0000 (18:01 +0800)]
FLASH/NOR: Remove useless file avrf.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Øyvind Harboe [Mon, 15 Nov 2010 13:43:16 +0000 (14:43 +0100)]
flash: fix bug with multiple back-to-back flash chips
flash programming via flash write_image or gdb load would
produce a bogus error message that the flash chip was to
small.
The solution is to limit the current flash programming
run to the current chip.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Antonio Borneo [Wed, 17 Nov 2010 02:53:30 +0000 (10:53 +0800)]
FLASH/NOR: Remove useless file at91sam7.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 02:25:55 +0000 (10:25 +0800)]
FLASH/NOR: Remove useless file at91sam3.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 00:21:22 +0000 (08:21 +0800)]
FLASH/NOR: Remove useless file spearsmi.h
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Wed, 17 Nov 2010 00:12:45 +0000 (08:12 +0800)]
NOR/SPEARSMI: Add comments about SPI
SMI interface hides the real SPI bus between SPEAr and
external flash.
Added comments to highlight the SPI operation, to help a
future rework in SPI generic and SPEAr specific drivers.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Thu, 11 Nov 2010 06:16:52 +0000 (14:16 +0800)]
TCL/SPEAr: Added Serial flash in board file
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Thu, 11 Nov 2010 06:12:31 +0000 (14:12 +0800)]
NOR/SPEAr: Add support for Serial NOR
Add support and documentation for STMicroelectronics
SPEAr Serial Memory Interface (SMI).
Code tested on SPEAr3xx only.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Øyvind Harboe [Thu, 11 Nov 2010 07:15:49 +0000 (08:15 +0100)]
httpd: retire this server
this never panned out and there are enough mistakes in
the code that probably nobody used this.
Use the tcl server and implement a standalone http
app instead works fine.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Freddie Chopin [Sat, 13 Nov 2010 14:42:00 +0000 (15:42 +0100)]
Add comments and tiny improvements to STM32 flash loader algorithm
Add comments to assembly flash loader for STM32. Add tiny improvement in
size of the algorithm (40 vs 48 bytes) and tiny speed improvement (~1.5%,
as time is wasted on waiting for end of operation anyway).
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
Øyvind Harboe [Sat, 13 Nov 2010 12:03:29 +0000 (13:03 +0100)]
gdb: fix occasional crash when flash probe failed
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Thu, 11 Nov 2010 07:50:22 +0000 (08:50 +0100)]
gdb: improve error message when gdb connect fails
gdb connect can fail when the flash has not been probed.
During gdb connect, the flash layout is reported, but this
can not be automatically detected for a target that is
powered up and OpenOCD supports connecting to gdb server
even if the target is powered down.
The solution is to turn of the gdb_memory_map feature.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 9 Nov 2010 08:14:21 +0000 (09:14 +0100)]
cortex_m3: report detected error condition in poll
If the CPU crashed at some point, poll will discover this.
Previously the poll fn would clear the error and print a warning,
rather than propagating the error.
The new behavior is to report the error back up, but still
clear the error.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Tue, 9 Nov 2010 08:17:49 +0000 (09:17 +0100)]
target: document that target_poll() will report and clear sticky errors
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Antonio Borneo [Mon, 8 Nov 2010 09:23:49 +0000 (17:23 +0800)]
TCL scripts: replace "puts" with "echo"
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Mon, 8 Nov 2010 07:13:28 +0000 (15:13 +0800)]
JIM: document "echo" command
Document "-n" option in manual;
Modify "echo" command definition as COMMAND_HANDLER to
easily add help message
Add help message aligned with manual.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Antonio Borneo [Mon, 8 Nov 2010 04:08:56 +0000 (12:08 +0800)]
JIM: Add "-n" option to "echo"
With the new JIMTCL, "puts" only writes to stdout.
To write on telnet port too, "echo" must be used.
This patch gives to "echo" similar commandline option of "puts".
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Øyvind Harboe [Mon, 8 Nov 2010 15:53:24 +0000 (16:53 +0100)]
stm32: return early upon block write failure
only if we do not have enough ram do we continue.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 8 Nov 2010 15:26:58 +0000 (16:26 +0100)]
stm32: return error when failing to read
add missing error handling.
Output warning when assuming maximum flash size in the
family when failing to read.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 8 Nov 2010 15:22:22 +0000 (16:22 +0100)]
stm32: add error propagation on writes
catch problems earlier.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Mon, 8 Nov 2010 15:02:07 +0000 (16:02 +0100)]
stm32: sharpen error handling for timeouts
delete lots of crud by handling this all in one spot.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Andrew Leech [Tue, 9 Nov 2010 07:05:02 +0000 (08:05 +0100)]
lpc3131: target definition
Antonio Borneo [Thu, 4 Nov 2010 08:53:28 +0000 (16:53 +0800)]
TCL scripts: add support for ST SPEAr310
Initial support for ST SPEAr310 and for the evaluation
board EVALSPEAr310 Rev. 2.0.
Scripts are split in generic for SPEAr3xx family and
specific for SPEAr310. This should easily allow adding
new members of the family.
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Marek Vasut [Fri, 29 Oct 2010 01:06:16 +0000 (03:06 +0200)]
Add EfikaMX smarttop board support
This patch finally adds support for i.MX51 based Genesi USA EfikaMX smarttop
board.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Marek Vasut [Fri, 29 Oct 2010 00:57:32 +0000 (02:57 +0200)]
CortexA8: Introduce Freescale i.MX51 variant
This patch introduces support for Cortex A8 based Freescale i.MX51 CPU. This CPU
has the Debug Access Port located at a different address (0x60008000) than TI
OMAP3 series of CPUs.
i.MX51 configuration file based on OMAP3 configuration file and an email from
Alan Carvalho de Assis <acassis@gmail.com>.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Marek Vasut [Fri, 29 Oct 2010 00:57:32 +0000 (02:57 +0200)]
CortexA8: Implement debug base autodetection
Implement autodetection of debug base. Also, implement a function solving
various hardware quirks (like iMX51 ROM Table location bug).
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Marek Vasut [Sun, 31 Oct 2010 06:11:47 +0000 (07:11 +0100)]
ADIv5: Implement function to lookup CoreSight component
This patch implements "dap_lookup_cs_component()", which allows to lookup CS
component by it's identification.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Marek Vasut [Sun, 31 Oct 2010 04:24:36 +0000 (05:24 +0100)]
ADIv5: Introduce function to detect ROM Table location
This patch adds function called "dap_detect_debug_base()", which should be
called to get location of the ROM Table. By walking ROM Table, it's possible to
discover the location of DAP.
Sadly, some CPUs misreport this value, therefore I had to introduce an fixup
table, which will be used in case such CPU is detected.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
ddraskovic [Thu, 4 Nov 2010 13:33:10 +0000 (14:33 +0100)]
arm964e: Add support for ARM946E target.
So far most of the people have been using existing ARM966E in the
place of ARM946E, because they have practically the same scan chains.
However, ARM946E has caches, which further complicates JATG handling
via scan-chain. this was preventing single-stepping for ARM946E when
SW breakpoints are used.
This patch thus introduces :
1) Correct cache handling on memory write
2) Possibility to flush whole cache and turn it off during debug, or
just to flush affected lines (faster and better)
3) Correct SW breakpoint handling and correct single-stepping
4) Corrects the bug on CP15 read and write, so CP15 values
are now correctly R/W
Øyvind Harboe [Fri, 29 Oct 2010 13:05:15 +0000 (15:05 +0200)]
bootstrap: add quick start build instructions
leave some bread-crumbs for users to figure out how
to build OpenOCD
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Øyvind Harboe [Fri, 15 Oct 2010 07:51:08 +0000 (09:51 +0200)]
jimtcl: 0.63 release
as a git module.
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)
Code Review / openocd.git / log