openocd.git
7 years agostlink_usb.c: add support for STLink V2-1 19/2019/6
Bartosz Bielawski [Tue, 4 Mar 2014 21:19:16 +0000 (22:19 +0100)]
stlink_usb.c: add support for STLink V2-1

The new version of STLink (V2-1) has a different USB endpoint layout.
As the PID of the device also changed it's possible to change EPs used
by OpenOCD in runtime. The patch adds three new fields to stlink_usb_handle_s
and assigns right EP numbers in stlink_usb_open().
Parts of the code inspired by and used with consent of Jens Hoffmann.

Change-Id: I93b69fb889f15317e9bf864905f435905db39745
Signed-off-by: Bartosz Bielawski <bartosz.bielawski@gmail.com>
Reviewed-on: http://openocd.zylin.com/2019
Tested-by: jenkins
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agobcm281xx: Add bcm281xx SoC and bcm28155_ap board 26/1926/4
Tim Kryger [Sun, 2 Feb 2014 21:26:26 +0000 (13:26 -0800)]
bcm281xx: Add bcm281xx SoC and bcm28155_ap board

Add support for Broadcom's dual A9 mobile SoC and its reference board.

Change-Id: Ia145b120043bddc89c44726066023154ae390788
Signed-off-by: Tim Kryger <tim.kryger@linaro.org>
Reviewed-on: http://openocd.zylin.com/1926
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agointerface/ftdi/xds100v2.cfg: Add another VID/PID, drop desc 16/2016/2
Tom Rini [Mon, 3 Mar 2014 20:14:47 +0000 (15:14 -0500)]
interface/ftdi/xds100v2.cfg: Add another VID/PID, drop desc

The XDS100v2 is often embedded in a number of platforms using the
VID/PID of 0x0403/0x6010 and a generic FTDI device description.  Add
this VID/PID combination and remove the description line.

Change-Id: I370e6199ac24f802426e9541e19ee38f18f1209a
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2016
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agostlink: Use callback to increase frequency of trace data sampling 61/1661/5
Andreas Fritiofson [Fri, 7 Mar 2014 19:08:31 +0000 (20:08 +0100)]
stlink: Use callback to increase frequency of trace data sampling

The ST-LINK/V2 has limited internal buffering, such that trace data
can be missed if the target is generating data at a rate quicker than
the OpenOCD trace sampling. The issue of lost data is compounded since
individual TPIU packets may be split across individual STLINK_TRACE_EP
reads, and misleading results can occur if mid-packet loss occurs.

This patch increases the frequency of checking for pending trace data
with the aim of minimising such losses. Note: With the limited (I/O
and memory) bandwidth of the ST-LINK/V2 there cannot, however, be a
guarantee against trace data loss.

The timer callback is only added when enabling tracing, and is removed
when tracing is disabled.

Change-Id: Ibde9794b77793d3068f88cb5c1a26f9ceadcbd8a
Signed-off-by: James G. Smith <jsmith@ecoscentric.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1661
Tested-by: jenkins
7 years agonrf51: Fix format string bugs in nrf51_info 11/2011/2
Andrey Smirnov [Fri, 28 Feb 2014 19:27:40 +0000 (11:27 -0800)]
nrf51: Fix format string bugs in nrf51_info

Additional information string appended to the 'flash info' output used
incorrect offsets and was missing a couple of fields.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Change-Id: If131be021295cab6adfca7da03c2f0fb8dca7d42
Reviewed-on: http://openocd.zylin.com/2011
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocfg: Switch ti_beaglebone to new ftdi interface 17/2017/2
Tom Rini [Mon, 3 Mar 2014 20:17:55 +0000 (15:17 -0500)]
cfg: Switch ti_beaglebone to new ftdi interface

Tested on Beagelbone White.

Change-Id: I544d7c1ba21a6bd594c0a1c4a9611639fa3c320d
Signed-off-by: Tom Rini <trini@ti.com>
Reviewed-on: http://openocd.zylin.com/2017
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
7 years agocortex_a: Fix endianess issues in cortex_a8_*_apb_ab_memory 81/1781/11
Kamal Dasu [Thu, 24 Oct 2013 18:58:55 +0000 (14:58 -0400)]
cortex_a: Fix endianess issues in cortex_a8_*_apb_ab_memory

Make the APB-AB memory read routines handle endianess order
when running on big endian host. cortex_a8_read_apb_ab_memory
is also called by cortex_a8_write_apb_ab_memory and was breaking
both APB-AB read and write functions. Also fixed bug in write
function in calculating the offset of end of buffer data. The
change aslo fixes the read issues with all combinations of
aligned unaligned memory access found by 'test_mem_access' cmd.

Tested with target "test_mem_access 4000", also size 1-9,
'mdb/h/w' 'mwb/h/w' cmds and equivalent gdb 'x' 'set' cmds.

Change-Id: Ia927c60c4837617f5342a9beb6fdab1f061855fe
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Reviewed-on: http://openocd.zylin.com/1781
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins
7 years agotarget: add CoreSight PMU and an unidentified component to "dap info" 28/1928/2
Paul Fertser [Wed, 5 Feb 2014 11:08:54 +0000 (15:08 +0400)]
target: add CoreSight PMU and an unidentified component to "dap info"

Change-Id: I705eae46b190dbd89ab01bc086c49eb04368d9b3
Reported-by: Brad Riensche <brad.riensche@gmail.com>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1928
Tested-by: jenkins
Reviewed-by: Brad Riensche <brad.riensche@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agotarget: "dap info" command cosmetic output changes 18/1518/7
Brad Riensche [Mon, 22 Jul 2013 15:22:08 +0000 (10:22 -0500)]
target: "dap info" command cosmetic output changes

This makes the listing easier to read, imho. The tab indentation
technique causes the base address to precess as the parser proceeds
through the subtables, and can easily wrap.

Change-Id: Iea5e678255e6314a9d532e4b222a2572b5394390
Signed-off-by: Brad Riensche <brad.riensche@gmail.com>
Reviewed-on: http://openocd.zylin.com/1518
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agotargets: Print nested ROM tables with the 'dap info' command. 27/1427/8
Chris Johns [Tue, 28 May 2013 23:47:34 +0000 (09:47 +1000)]
targets: Print nested ROM tables with the 'dap info' command.

Move the ROM table printing into a separate function to allow
recursive calls with nested tables. ROM tables can nest. The
printing is limited to 16 levels.

Update the types of tables printed. When an entry can't be read, print
a warning and continue.

Change-Id: Ib134edd9e987af2f5f606071521885b17af4d70f
Signed-off-by: Chris Johns <chrisj@rtems.org>
Reviewed-on: http://openocd.zylin.com/1427
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agoRename and sort udev rules file 69/1969/4
Andreas Fritiofson [Mon, 24 Feb 2014 20:40:58 +0000 (21:40 +0100)]
Rename and sort udev rules file

Also add missing entries for JTAG-lock-pick Tiny 2, Xverve Signalyzer
LITE and default FTDI VID:PIDs.

Change-Id: I41b4f15409642298d1cf134d1f8014dc8f003005
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1969
Tested-by: jenkins
7 years agogdb_server: Fix segfault in (and rewrite) decode_xfer_read 23/2023/2
Andreas Fritiofson [Thu, 6 Mar 2014 21:06:59 +0000 (22:06 +0100)]
gdb_server: Fix segfault in (and rewrite) decode_xfer_read

Introduced by 537b06a81 (free non-malloced memory).

Rewrite to use standard C string routines and make returning annex
optional since it's not currently used.

Change-Id: Idf3698a482dfeff7fa5ea1660fd89122eb80b68d
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/2023
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agogdbserver: fix duplicate declaration 20/2020/2
Spencer Oliver [Tue, 4 Mar 2014 21:51:58 +0000 (21:51 +0000)]
gdbserver: fix duplicate declaration

commit da0d1e37 did not merge correctly, causing the build to fail.

Change-Id: I3f525054bb38b7ee29bf27309bb2e6a5bb8329c7
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/2020
Tested-by: jenkins
7 years agoAdd support for the Atmel SAMG53 74/1974/2
Andrey Yurovsky [Wed, 26 Feb 2014 06:18:03 +0000 (22:18 -0800)]
Add support for the Atmel SAMG53

flash: at91sam4: add support for the SAMG53 family (this also covers the
SAMG51).  The SAMG5x parts have an EEFC (enhanced embedded flash controller)
which seems to be identical to the EFC that the sam4 driver supports.

Add a script for the Xplained Pro G53 board, this has the onboard CMSIS-DAP
debugger and a SAMG53N19.  Tested on this board and chip combination.

Change-Id: I12af50402cd2069b3c7380d92e6fe54816d6c045
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1974
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoCMSIS-DAP: Fix build errors on Mac OS X 73/1973/2
Jens Bauer [Tue, 25 Feb 2014 21:05:13 +0000 (22:05 +0100)]
CMSIS-DAP: Fix build errors on Mac OS X

Rename the argument variable 'wait' to 'delay', as 'wait'
conflicts with an API function declared in system header
/usr/include/sys/wait.h on Mac OS X.

Change-Id: I5742da6e5def6e5ec197e774c3844e4bf0424569
Signed-off-by: Jens Bauer <jens@gpio.dk>
Reviewed-on: http://openocd.zylin.com/1973
Tested-by: jenkins
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agogdb_server: fix memory leaks in users of get_reg_features_list() 17/1917/6
Christian Eggers [Sun, 2 Feb 2014 12:25:16 +0000 (13:25 +0100)]
gdb_server: fix memory leaks in users of get_reg_features_list()

v4:
- changed first line of commit message
v3:
- added extra LOG_ERROR() message
v2:
- Added missing "goto error"
- free also the on extra element of features[]

In contrast to target_get_gdb_reg_list(), the list returned by
get_reg_features_list() consists of items which are itself
malloc'ed.
--> Free the list items prior freeing the list itself.

Additionally:
- gdb_generate_target_description():
  o Do error handling similar as gdb_get_target_description_chunk() does.
- gdb_get_target_description_chunk()
  o **features must be initialised prior an "goto error" can happen

Change-Id: Iad07824618c51084e0aa0499ee6fc96198b320f0
Signed-off-by: Christian Eggers <ceggers@gmx.de>
Reviewed-on: http://openocd.zylin.com/1917
Tested-by: jenkins
Reviewed-by: Trevor Woerner <trevor.woerner@linaro.org>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoConstify received GDB packet 19/1919/6
Christian Eggers [Fri, 14 Feb 2014 20:48:52 +0000 (21:48 +0100)]
Constify received GDB packet

v2:
- Split work into separate patches

The received packet will not be altered in any of the processing functions.
Some it can be made "const".

Change-Id: I7bb410224cf6daa74a6c494624176ccb9ae638ac
Signed-off-by: Christian Eggers <ceggers@gmx.de>
Reviewed-on: http://openocd.zylin.com/1919
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agogdb_server: Don't modify "buf" argument in decode_xfer_read() 24/1924/5
Christian Eggers [Fri, 14 Feb 2014 20:43:53 +0000 (21:43 +0100)]
gdb_server: Don't modify "buf" argument in decode_xfer_read()

Make a temporary copy of argument "buf" before modifying it.
This requires also returning annex as copy of "buf".

This change is necessary in order to make packet[] "const".

Change-Id: I41eddc2edba1a88384aa7f5591fe50f6ee6a135c
Signed-off-by: Christian Eggers <ceggers@gmx.de>
---
Changelog:
v4:
- Initialize annex to NULL
v3:
- Return "annex" as copy instead of removing it.
Reviewed-on: http://openocd.zylin.com/1924
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoRemove unneeded zero termination of received packet 22/1922/3
Christian Eggers [Mon, 3 Feb 2014 19:13:54 +0000 (20:13 +0100)]
Remove unneeded zero termination of received packet

v2:
  removed curly braces around single statement if-block

packet[] has already been zero terminated in gdb_input_inner()
This change is necessary in order to make packet[] "const".

Change-Id: I978bbe52d151a63574db77fb747f596da256d377
Signed-off-by: Christian Eggers <ceggers@gmx.de>
Reviewed-on: http://openocd.zylin.com/1922
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agogdb-server/rtos: Send correct answer to "qfThreadInfo" packet 25/1925/2
Christian Eggers [Mon, 3 Feb 2014 20:12:49 +0000 (21:12 +0100)]
gdb-server/rtos: Send correct answer to "qfThreadInfo" packet

Even if no RTOS is configured, "qfThreadInfo" must be answered with "l"
instead of "". Otherwise GDB will switch to the older thread packet ("qL"),
which is not supported by OpenOCD.

Change-Id: Iead045bdf8268bac2378c8f70829b17c37834e44
Signed-off-by: Christian Eggers <ceggers@gmx.de>
Reviewed-on: http://openocd.zylin.com/1925
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoRTOS: Unify wipe-out of thread list 16/1916/8
Christian Eggers [Sat, 1 Feb 2014 09:17:17 +0000 (10:17 +0100)]
RTOS: Unify wipe-out of thread list

Each RTOS implementation uses it's own (similar) code to free
the thread list. There are some additional issues:

<--->
if (pointer != NULL)
free(pointer);
<--->
This is not necessary, free(NULL) is perfectly ok.

<--->
free(rtos->thread_details);
rtos->thread_details = NULL;
rtos->thread_count = 0;
<--->
The 3rd line has been missing for all RTOS but ChibiOs. There are paths
in the code where rtos->thread_count is never set to NULL, which can
lead to null pointer dereference of rtos->thread_details.

Change-Id: I6f7045c3d4518b925cb80dd5c907a566536b34ad
Signed-off-by: Christian Eggers <ceggers@gmx.de>
---
Changelog:
v7:
- rtos_wipe_threadlist() --> rtos_free_threadlist()
- removed non related changes in gdb_server.c from this patch
v3:
- Removed world "topic" from first line of commit message
v2:
- typo: "whipe" --> "wipe"
Reviewed-on: http://openocd.zylin.com/1916
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agomips32: build register cache in a more clear way 43/1943/2
Antony Pavlov [Sun, 9 Feb 2014 08:15:06 +0000 (12:15 +0400)]
mips32: build register cache in a more clear way

This commit is inspired by armv7m_build_reg_cache().

Change-Id: I62b51b2a5f0fed788af167b6f8e60c09b53181be
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1943
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agofm3: fix erase flash fail on using High Level Adapters. 44/1944/2
Nemui Trinomius [Tue, 11 Feb 2014 07:09:32 +0000 (16:09 +0900)]
fm3: fix erase flash fail on using High Level Adapters.

This fix can "erase flash" on using High Level Adapters by running algorithm.
Because fm3 flash commands must need true 16-bit memory access,
but High Level Adapters(ST-Link/TI-ICDI) can 8/32bit access only.
Tested on MB9BF618T and MB9AF112K with STLink/V2.

Change-Id: I849a8a8e8ae2b3e77717de04f7522cf718c915d7
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/1944
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agodrivers/jtag: usb_blaster: make command handlers more strict 42/1942/4
Antony Pavlov [Sat, 8 Feb 2014 20:11:42 +0000 (00:11 +0400)]
drivers/jtag: usb_blaster: make command handlers more strict

If user used wrong argument number for some usb_blaster_* commands
then openocd show just warning message.
This commit makes command handler's behaviour more strict and
openocd treats wrong argument number as an error.

In addition we already have 'help' and 'usage' information in
struct command_registration ublast_command_handlers[],
so we can drop redundancy messages in command handlers.

Change-Id: I73b8c75ec60a18e5258a4bdffe972e8a1afc1066
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1942
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agonrf51: Implement the support for Nordic's nRF51 devices 45/1945/11
Andrey Smirnov [Fri, 7 Feb 2014 19:54:57 +0000 (11:54 -0800)]
nrf51: Implement the support for Nordic's nRF51 devices

Add support for Nordic's nRF51 chip series. Tested with nRF51822.

Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1945
Tested-by: jenkins
Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoEFM32 Wonder Gecko Family support 68/1968/2
Joerg Fischer [Sun, 23 Feb 2014 17:09:50 +0000 (18:09 +0100)]
EFM32 Wonder Gecko Family support

Add support for EFM32 Wonder Gecko family to flash driver.
This family has Cortex M4F core.

Change-Id: If71511015403069e3e30cb9f19df12cd97ac49e8
Signed-off-by: Joerg Fischer <turboj@gmx.de>
Reviewed-on: http://openocd.zylin.com/1968
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotcl/drscan: handle invalid syntax with a conditional, not assert 27/1927/2
Paul Fertser [Tue, 4 Feb 2014 12:07:57 +0000 (16:07 +0400)]
tcl/drscan: handle invalid syntax with a conditional, not assert

When "drscan" command is used improperly, such as in:
drscan stm32f1x.cpu -endstate drpause
there're no fields to scan, and so the assert leads to a
segfault. This should be treated like any other syntax error instead.

Change-Id: Id1743f5d641038e1e3754c6f3097aabc5d1916b9
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1927
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agousb_blaster: ublast_access.h: add guard macro 41/1941/3
Antony Pavlov [Sat, 8 Feb 2014 20:10:07 +0000 (00:10 +0400)]
usb_blaster: ublast_access.h: add guard macro

Change-Id: I10f6e2048cf88f64f5dce275a273783365afd65c
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1941
Tested-by: jenkins
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
7 years agodrivers/ftdi: warn the user if he tries to use undefined reset signals 48/1948/2
Paul Fertser [Sat, 15 Feb 2014 18:43:38 +0000 (22:43 +0400)]
drivers/ftdi: warn the user if he tries to use undefined reset signals

It is really an error to try to use a reset_config that doesn't match
adapter's capabilities, however OpenOCD has no way to specify them.

Using wrong reset_config might lead to very confusing behaviour, so I
think LOG_ERROR is justified here.

Change-Id: I1c6dcfa7c0d78829229a850189cad646b565dd66
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1948
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoft2232: warn about lack of TRST on "turtle" adapter 46/1946/4
Paul Fertser [Sat, 15 Feb 2014 18:28:49 +0000 (22:28 +0400)]
ft2232: warn about lack of TRST on "turtle" adapter

This patch fixes a build error (assigning a variable to itself) with
clang.

Since this adapter lacks trst, trying to use it in reset_config will
fail silently. Warn the user accordingly.

Change-Id: I16fd20936f00d7ff82962f4fcc629ff434aa4dce
Reported-by: Rainer Müller <raimue@codingfarm.de>
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1946
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocfg: Make stm32f4x usable with SWD transport 51/1951/2
Fatih Aşıcı [Sun, 16 Feb 2014 09:13:53 +0000 (10:13 +0100)]
cfg: Make stm32f4x usable with SWD transport

Change-Id: Ib8f3b414ec3c31cf8a112e75efe003e2237c59bb
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1951
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
7 years agostm32f1x: Fix option byte flag parsing 63/1963/2
Andreas Fritiofson [Fri, 21 Feb 2014 16:17:32 +0000 (17:17 +0100)]
stm32f1x: Fix option byte flag parsing

Change-Id: Ifa04e1f215ac5790db3d432cc0d7d532660459f2
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1963
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoarm926ejs: fix write memory operations with caches enabled 12/1912/2
Paul Fertser [Thu, 30 Jan 2014 10:11:13 +0000 (14:11 +0400)]
arm926ejs: fix write memory operations with caches enabled

Perform proper ICache flush operations on memory writes. This should fix
inability to use software breakpoints for debugging with caches
enabled.

This patch is only compile-time tested.

Commit 1137eaedaf6498f3448cdedf6f93076d9b3fd58a fixed the same issue
for arm920t. Among all the arm7_9_common targets only arm926ejs seems
to be broken in the same way.

Change-Id: I575306ac4319a69fc637b42f7c958f4595c5e81f
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1912
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agoquark_x10xx: add new target quark_x10xx 29/1829/4
Adrian Burns [Thu, 6 Feb 2014 17:11:15 +0000 (17:11 +0000)]
quark_x10xx: add new target quark_x10xx

Intel Quark X10xx SoC debug support added
Lakemont version 1 (LMT1) is the x86 core in Quark X10xx SoC
Generic x86 32-bit code is in x86_32_common.c/h

Change-Id: If2bf77275cd0277a82558cd9895b4c66155cf368
Signed-off-by: adrian.burns@intel.com
Reviewed-on: http://openocd.zylin.com/1829
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agodoc: update README.Windows with new Zadig download URL 40/1940/2
Pete Batard [Thu, 6 Feb 2014 19:47:46 +0000 (19:47 +0000)]
doc: update README.Windows with new Zadig download URL

As the old SF repository indicates, newer downloads have been moved to an
alternate server, and 3 new releases of Zadig have already occurred there.

Change-Id: I8ff967fd834e9c8dd2cce9dcbbe07e03d2b33e4a
Signed-off-by: Pete Batard <pete@akeo.ie>
Reviewed-on: http://openocd.zylin.com/1940
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
7 years agointerface/ftdi/xds100v2.cfg: default to reset state and ask user to release it later 84/1884/3
Paul Fertser [Sat, 18 Jan 2014 16:24:24 +0000 (20:24 +0400)]
interface/ftdi/xds100v2.cfg: default to reset state and ask user to release it later

This adapter is special and needs a reset sequence to be performed
before operation. Since there're no suitable hooks to do that, we have
no choice but to ask the user to manually add the necessary commands
to his or her config file.

Change-Id: I48fb4276e77529768266840221b68c3ae26801e1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1884
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agonor/flash/stm32f1x: add stm32f07x support 21/1921/6
Kuldeep Singh Dhaka [Mon, 3 Feb 2014 16:27:33 +0000 (21:57 +0530)]
nor/flash/stm32f1x: add stm32f07x support

Added configuration to work with stm32f07x.
Tested on stm32f072discovery with libopencm3 stm32f0 blink example.

Change-Id: I63cdc9bf1f28f5951d6b4faac871cfde331c9c78
Signed-off-by: Kuldeep Singh Dhaka <kuldeepdhaka9@gmail.com>
Reviewed-on: http://openocd.zylin.com/1921
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agocortex_a: do not try to use MMU for translation if it wasn't enabled on target stop 87/1787/3
Paul Fertser [Tue, 29 Oct 2013 09:45:07 +0000 (13:45 +0400)]
cortex_a: do not try to use MMU for translation if it wasn't enabled on target stop

On a target where AHB AP memory access is unavailable, care should be
taken to avoid treating addresses as virtual if the MMU was disabled
at the time the target was stopped.

Without this it's impossible to peek memory with Gdb when debugging
e.g. a bootloader because cortex_a8_read_memory() unconditionally
tried (and failed because of a sanity check in cortex_a8_mmu_modify)
to enable MMU.

Change-Id: Id7c63f4912920fb71a6104226ec6428d18c96a56
Reported-by: mbm@openwrt.org
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1787
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agogdb_server: Fix confusing warning when entering noack mode 95/1895/3
Anton Kolesov [Wed, 22 Jan 2014 16:18:56 +0000 (20:18 +0400)]
gdb_server: Fix confusing warning when entering noack mode

Comment in gdb_server code mistakenly attributed constant warnings
about unexpected acknowledgement to the ACK packet sent by GDB when
establishing connection. However that is not the case, OpenOCD
gdb_server is handling this packet correctly without an warnings. This
warning instead was caused by the ACK packet which GDB sends right after
going into noack mode. Because OpenOCD gdb_server is already in noack
mode at this state, it emits warning about it. This is a documented GDB
behaviour
(https://sourceware.org/gdb/onlinedocs/gdb/Packet-Acknowledgment.html)
so there is no reason to scare users with warnings in this case.

This patch basically introduces two-level noack mode: after receiving
QStartNoAckMode gdb_server will set noack_mode to 1, then it will
receive this last ACK packet, but instead of printing a warning,
noack_mode will be increased to 2. Should there be any other ACK packets
after that, they will be properly reported by warning. All other code
that relies on noack_mode checks it for "!= 0", so there will be no
difference if it is 1 or 2.

Change-Id: I0e9c57fd93293bfe010390db2f3f161528b11d86
Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Reviewed-on: http://openocd.zylin.com/1895
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoflash: declare fixed arrays const 87/1887/2
Spencer Oliver [Mon, 20 Jan 2014 15:03:24 +0000 (15:03 +0000)]
flash: declare fixed arrays const

Change-Id: Id06b8b53ec59a7b3182f60f51dde5b16563aaeef
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1887
Tested-by: jenkins
7 years agoflash/nor/mdr.c: fix uninitialised variable warning 75/1875/3
Paul Fertser [Fri, 17 Jan 2014 10:06:51 +0000 (14:06 +0400)]
flash/nor/mdr.c: fix uninitialised variable warning

Caught (actually, it's breaking the build) by clang 3.3.

Change-Id: Ife6fabf8a57e6c90ab45aaaf75557c984ac6772c
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1875
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoflash/nor/stm32f1x: fix format specifiers warning 79/1879/2
Paul Fertser [Fri, 17 Jan 2014 11:17:14 +0000 (15:17 +0400)]
flash/nor/stm32f1x: fix format specifiers warning

Caught by clang on OS X. Reported by Steffanx on IRC.

Change-Id: Id77c7297c58e58c4e2aa8e5dafcb3a29a1f33f3d
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1879
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotarget/nds32_disassembler: fix format specifiers warnings 78/1878/2
Paul Fertser [Fri, 17 Jan 2014 10:11:55 +0000 (14:11 +0400)]
target/nds32_disassembler: fix format specifiers warnings

According to the standard every operation returns at least an integer,
so PRIu8 format specifier is not suitable for these values as is.

This breaks build on OS X (x86_64-apple-darwin13.0.0) with "Apple LLVM
version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)".

Fix by adding appropriate casts. In fact there's plenty of room (and
I'd say necessity) for factoring out common code in there, but it's
too invasive for a non-maintainer.

Change-Id: I7d2182eb1d2f86fa22c882fbbaa6cfadf1c3e8fc
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1878
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoserver/gdb_server: fix uninitialised variable warning 77/1877/2
Paul Fertser [Fri, 17 Jan 2014 10:10:57 +0000 (14:10 +0400)]
server/gdb_server: fix uninitialised variable warning

Caught (breaks build) with clang 3.3.

Change-Id: I5978fe34e82122f62e3d587bcdc45ad12f5e55ca
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1877
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agortos: fix uninitialised variable warning 76/1876/2
Paul Fertser [Fri, 17 Jan 2014 10:08:07 +0000 (14:08 +0400)]
rtos: fix uninitialised variable warning

Breaks build with clang 3.3. This "addr" variable is actually always
ignored by next_symbol() when cur_symbol is an empty string but clang
can't (and probably shouldn't) prove that automatically.

Change-Id: Id030f1aa34b9d40b5fa20a422031511520e52669
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1876
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agodoc: add missing reg command argument 'force' 97/1897/3
Spencer Oliver [Fri, 24 Jan 2014 12:43:41 +0000 (12:43 +0000)]
doc: add missing reg command argument 'force'

The argument 'force' enables a user to bypass the internal cache and read
a target register directly. However it is missing from the user guide.

Change-Id: I26f689eec20b38a0dc5294626b25df566b554446
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1897
Tested-by: jenkins
7 years agointerface/ftdi: add TUMPA Lite config 18/1918/2
Paul Fertser [Sun, 2 Feb 2014 09:04:41 +0000 (13:04 +0400)]
interface/ftdi: add TUMPA Lite config

TUMPA Lite is a cheap FT232H-based breakout board, without any
buffering. It also lacks series resistors so for some targets
(especially when not using ridiculously short wires) one needs to add
about 47 Ohms in series on every high-speed line.

The SRST line is connected directly to the FT232H too.

Real-life tested (including SRST and TRST).

Change-Id: I5ed4f88d8d20384e9c52efe2ff0c290e2650d43e
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1918
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agokinetis : improve kinetis flash driver. 94/1894/3
Nemui Trinomius [Wed, 22 Jan 2014 14:46:32 +0000 (23:46 +0900)]
kinetis : improve kinetis flash driver.

Kinetis K-series have different guranuarity for each frequency model.
This patch adding more minute guranuarity detection.
And adopted mass erase command not only L-series but also K-series.
Tested on MK20DX32VLF5,MK10DX32VLF5,and MKL25Z128VLK4.

Change-Id: Iffef850d4b388463756a13faf02c3890bfc19acf
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/1894
Tested-by: jenkins
Reviewed-by: Per Ekman <pekenator@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
7 years agodoc: update CMSIS-DAP info to match default driver behaviour 02/1902/2
Spencer Oliver [Mon, 27 Jan 2014 14:21:25 +0000 (14:21 +0000)]
doc: update CMSIS-DAP info to match default driver behaviour

By default the driver will now auto detect attached adapters, it does not
use an internal list any more. Update docs to match this.

Change-Id: I62a9d243cd236a8cf54cbd9d088c4837a8df31bf
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1902
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
7 years agocfg: LPC17xx default to using SYSRESETREQ to reset target 92/1892/2
Spencer Oliver [Wed, 22 Jan 2014 11:04:26 +0000 (11:04 +0000)]
cfg: LPC17xx default to using SYSRESETREQ to reset target

Originally the LPC17xx user guide (UM10360 Rev 2) stated that SYSRESETREQ
was not supported, so this was the default cortex_m reset mode.

Rev 3 of the same user guide states that it is now supported.
This has been verified on a LPC1768 mbed platform, previously I have not
tested this functionality.

Change-Id: I4858248903981a1c93ce75016e67c9e02702fcc5
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1892
Tested-by: jenkins
Reviewed-by: Jörg Fischer <turboj@gmx.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agotop .gitignore: ignore .dirstamp files 98/1898/3
Antony Pavlov [Sat, 25 Jan 2014 07:07:53 +0000 (11:07 +0400)]
top .gitignore: ignore .dirstamp files

Just after succesfull build you can see some untracked files
in the 'git status' output:

src/jtag/drivers/versaloon/.dirstamp
src/jtag/drivers/versaloon/usbtoxxx/.dirstamp

This commit fixes the problem.

Change-Id: I1674eb4423e97c5f0a47f216981eaffdc351f784
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Reviewed-on: http://openocd.zylin.com/1898
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
7 years agoarm920t: fix write memory operations with caches enabled 17/1817/2
Paul Fertser [Tue, 26 Nov 2013 15:46:09 +0000 (19:46 +0400)]
arm920t: fix write memory operations with caches enabled

Commit ff5ec942d80a34e20b5a3ca3328f7e6a55fb309b made this target
always use generic arm7_9 memory write routines for software
breakpoints which resulted in inability to debug and single-step
sources in Gdb when icache is active as generic routine doesn't
invalidate it. This should fix it (and is real-life tested against
Samsung S3C2442). I expect other arm7-9 targets to be affected as
well.

Change-Id: Id7980e370ae4db47ac6b1490321d81ffe85711c0
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1817
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agoAdd GDB remote target description support for ARM4 10/1810/4
Luca BRUNO [Thu, 22 Aug 2013 14:41:38 +0000 (16:41 +0200)]
Add GDB remote target description support for ARM4

This commit adds support for passing the ARM4 target description to GDB
when enabling gdb_target_description, in order to expose all banked
registers.

Change-Id: Id618bc6226f00fe83397ea28888a84b64b09cafd
Signed-off-by: Luca BRUNO <lucab@debian.org>
Reviewed-on: http://openocd.zylin.com/1810
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoCMSIS-DAP: auto-detect CMSIS-DAP USB VID:PID 88/1888/2
Peter Lawrence [Tue, 21 Jan 2014 00:08:58 +0000 (17:08 -0700)]
CMSIS-DAP: auto-detect CMSIS-DAP USB VID:PID

The current OpenOCD implementation requires CMSIS-DAP adapter USB
VID:PID values to either be hard-coded in the source or manually
supplied by the user's configuration files.  The CMSIS-DAP
specification stipulates that all compliant adapters should have
"CMSIS-DAP" in the product string.  This should obviate the need
for hard-coding.

This patch was previously submitted as changes 1882, 1883, and 1886
but amendments failed to be registered by the server.  The
functionality was changed from 1886 in response to comments so that
user-supplied VID:PID values overrided the CMSIS-DAP auto-detect.

Change-Id: Ifb2dc217248359f448e0a42bd1527dd744c434b0
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: http://openocd.zylin.com/1888
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoflash: samd: declare const data 74/1874/2
Andrey Yurovsky [Wed, 15 Jan 2014 16:10:35 +0000 (08:10 -0800)]
flash: samd: declare const data

Make the chip information lookup tables const (thanks to Spencer Oliver for
pointing this out).  Also fix spacing on one macro.  No functional changes.

Change-Id: I053c4951c2626b8aa4541a79673b500394ef08e8
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1874
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agodoc: Add Gerrit to the Developer resources section 85/1885/2
Andreas Fritiofson [Sat, 18 Jan 2014 17:16:42 +0000 (18:16 +0100)]
doc: Add Gerrit to the Developer resources section

Change-Id: Icbf2050967cea06b05a09574a6a91ce1407a489f
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1885
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoAdd CMSIS-DAP information to the READMEs. 80/1880/2
Paul Fertser [Fri, 17 Jan 2014 11:25:53 +0000 (15:25 +0400)]
Add CMSIS-DAP information to the READMEs.

Change-Id: I8c87d559adf07b0f0702fe9d388f26bf046bcb8b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1880
Tested-by: jenkins
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agogdb_server: check for invalid read memory requests 53/1853/3
Paul Fertser [Mon, 6 Jan 2014 17:36:21 +0000 (21:36 +0400)]
gdb_server: check for invalid read memory requests

This prevents invalid free(NULL) (that crashes OpenOCD on desktop
distros).

With radare2 it's now a bit more useful, memory access works if I seek
to the correct address, can't test further as it apparently lacks thumb2
support.

Change-Id: I6ec32d09fd52dab53ba765d7f7519baa1f55d973
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1853
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoRetire jtag_add_dr_out 01/1801/2
Andreas Fritiofson [Wed, 6 Nov 2013 23:40:50 +0000 (00:40 +0100)]
Retire jtag_add_dr_out

The out only version of jtag_add_dr_scan smells like a bogus optimization
that complicates the minidriver API for questionable gain.

The function was only used by four old ARM targets. Rewrite the callers
to use the generic function and remove all implementations.

Change-Id: I13b643687ee8ed6bc9b6336e7096c34f40ea96af
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1801
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agojtag/drivers: add USB-Blaster II 91/1791/8
Franck Jullien [Sun, 3 Nov 2013 16:31:44 +0000 (17:31 +0100)]
jtag/drivers: add USB-Blaster II

This patchs adds a new access driver for the existing
USB-Blaster interface driver.

This interface (as it is build-in on the sockit development
board) is composed of a Cypress EZ-USB plus a CPLD.

The Cypress chip as an embedded 8051 microcontroller.
When it's powered up, the firmware is downloaded to the
chip then the device is disconnected and reconnected with
the new firmware.

The USB-Blaster II protocol is almost identicial to
the old one. The only difference is that you need to
send a 0x5F before read TDO back. This command
seems to copy TDO buffer datas to the endpoint buffer.

Driver will be auto enabled if libusb-1.0 is detected.

Change-Id: I562a720a68cb4dcabeab791947d5d38776cb70fa
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1791
Tested-by: jenkins
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocfg: add Freescale FRDM-KL46Z Board 66/1866/2
Spencer Oliver [Sat, 11 Jan 2014 23:14:13 +0000 (23:14 +0000)]
cfg: add Freescale FRDM-KL46Z Board

Change-Id: Ib585728f13a380eeeb2ada095f3e1a1c2aaf44cb
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1866
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agotarget: fix typos 64/1864/2
Spencer Oliver [Sat, 11 Jan 2014 22:17:33 +0000 (22:17 +0000)]
target: fix typos

Change-Id: Icdb517224e8bcf41a16498088e09955048077d35
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1864
Tested-by: jenkins
Reviewed-by: Bill Traynor <btraynor@gmail.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agocortexm: use Cortex-M rather than cortex-m3 for dwt registers 65/1865/3
Spencer Oliver [Mon, 13 Jan 2014 09:53:32 +0000 (09:53 +0000)]
cortexm: use Cortex-M rather than cortex-m3 for dwt registers

Change-Id: I28e3a8c65ccc4a4e3ec94e41c846e6a263c165e8
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1865
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agoConform to C99 integer types format specifiers 94/1794/5
Hsiangkai Wang [Mon, 4 Nov 2013 04:43:12 +0000 (12:43 +0800)]
Conform to C99 integer types format specifiers

Review and modify to conform to C99 integer types format specifiers.
Use arm-none-eabi toolchain to build successfully.

Change-Id: If855072a8f88886809309155ac6d031dcfcbc4b2
Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com>
Signed-off-by: Hsiangkai <hsiangkai@gmail.com>
Reviewed-on: http://openocd.zylin.com/1794
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoGrammatical cleanup to Tcl Scripting chapter of User's Guide 72/1872/4
Robert P. J. Day [Mon, 13 Jan 2014 11:49:33 +0000 (06:49 -0500)]
Grammatical cleanup to Tcl Scripting chapter of User's Guide

Changes solely to the Tcl Scripting API chapter of the UG:

* Some grammatical cleanup
* Fix formatting issues (@example and @verbatim formatting)
* Add references to missing OSes OpenBSD, NetBSD and eCos.

Change-Id: I3ec1a192a0b1e0a207dceb76fd39008d01e287a5
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1872
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoAtmel samd: add support for SAMD21 73/1873/2
Andrey Yurovsky [Mon, 23 Dec 2013 18:27:28 +0000 (10:27 -0800)]
Atmel samd: add support for SAMD21

Tested with SAMD21J18A on the SAMD21 Xplained Pro board.

Change-Id: Ice9ebcd229ed038b3193baf92d910f9256d7ce91
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1873
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocortex_m: Avoid unnecessary saving and restoring of DCRDR 48/1848/3
Andreas Fritiofson [Sun, 29 Dec 2013 20:59:36 +0000 (21:59 +0100)]
cortex_m: Avoid unnecessary saving and restoring of DCRDR

This is used for the emulated DCC channel which is only maintained as long
as target->dbg_msg_enabled is set. Skip the saving and restoring if not
enabled to save one dap_run() per core register access.

Note that we could've probably queued all core register accesses in the
same transaction if the armv7 register framework hadn't required
synchronous register accesses.

Change-Id: I4fe6d713261ee5db42422203eb63035fdcc48891
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1848
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoadi_v5: Remove unnecessary MEM-AP access functions 47/1847/2
Andreas Fritiofson [Sun, 29 Dec 2013 20:14:58 +0000 (21:14 +0100)]
adi_v5: Remove unnecessary MEM-AP access functions

It's far nicer to pass a size parameter than to split the calls to
separate wrappers which are combined to a single function anyway.

Change-Id: I716741ebf916f6f8e9358a31c8f4fe761107c82f
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1847
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocortex_m: Fix possible endianness problem in emulated DCC channel 46/1846/2
Andreas Fritiofson [Sun, 29 Dec 2013 20:12:30 +0000 (21:12 +0100)]
cortex_m: Fix possible endianness problem in emulated DCC channel

Change-Id: If7104464a8c65085f3ceac445e9c9be8446f2da9
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1846
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotarget: Add test bench for memory access functions 29/1629/5
Andreas Fritiofson [Sun, 29 Dec 2013 14:22:39 +0000 (15:22 +0100)]
target: Add test bench for memory access functions

Change-Id: I86e6fe4d0b4d580389ae5e1d3f4813d1e25b2613
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1629
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agolpc2000: fix LPC810 programming support 43/1843/2
Nemui Trinomius [Fri, 27 Dec 2013 03:25:33 +0000 (12:25 +0900)]
lpc2000: fix LPC810 programming support

IAP commands fail on programming LPC810 because it has only 1kByte of SRAM.
This patch is fixing cmd51_max_buffer suitable size for LPC810,LPC811 and
other LPC1000 series.
Tested on a LPC810,LPC812,LPC11u14,and LPC1114(DIP28).

Change-Id: Iecec9fd963cb63bdff4a7bd3bbf4f8b1a7c60fbd
Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
Reviewed-on: http://openocd.zylin.com/1843
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoA few more grammar and typo fixes from the User's Guide. 63/1863/2
Robert P. J. Day [Sat, 11 Jan 2014 10:35:49 +0000 (05:35 -0500)]
A few more grammar and typo fixes from the User's Guide.

More cleanup from some of the later chapters from the User's Guide,
no functional changes.

Change-Id: Ib2860fc2574503e8107935d79db45fa96014fe3a
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1863
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoRemove obsolete tip referring to 2010 removal of TAP numbers. 62/1862/2
Robert P. J. Day [Sat, 11 Jan 2014 09:42:35 +0000 (04:42 -0500)]
Remove obsolete tip referring to 2010 removal of TAP numbers.

Remove a tip describing the discouraged use of TAP numbers, and how
these numbers would be removed by mid-2010.

Change-Id: Iebe7e2e4a0f8e1f18a91d7935588dd9ced2b398d
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1862
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoProofreading, typo and grammar fixes to Ch 10 User's Guide. 61/1861/2
Robert P. J. Day [Fri, 10 Jan 2014 17:15:52 +0000 (12:15 -0500)]
Proofreading, typo and grammar fixes to Ch 10 User's Guide.

Various cleanups to Chapter 10 of the User's Guide, no functional
changes.

Change-Id: I055d032eacc8e85b1d8edbd4bcc505f6f0feaa49
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1861
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoSome minor URL fixes and typo fixes, no functional changes. 59/1859/2
Robert P. J. Day [Thu, 9 Jan 2014 16:09:48 +0000 (11:09 -0500)]
Some minor URL fixes and typo fixes, no functional changes.

Change-Id: Ib262d9e6330c35d26868942b821de7b53e00b854
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1859
Tested-by: jenkins
Reviewed-by: Bill Traynor <btraynor@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoadd support for Atmel SAMD NOR Flash 84/1684/8
Andrey Yurovsky [Fri, 4 Oct 2013 03:41:33 +0000 (20:41 -0700)]
add support for Atmel SAMD NOR Flash

This adds a new NOR Flash driver, "at91samd", which supports the
built-in Flash on Atmel's D-series Cortex M MCUs, starting with the D20.
Parts and their geometry are detected automatically using the DSU and
lookup schemes described in the D20 document, 42129F–SAM–10/2013.
Future D-series variants and families should presumably use this
controller as well (possibly with minor changes and improvements).

Tested on the SAMD20 Xplained Pro board, for which we also add the
corresponding Flash configuration.

Change-Id: Id8d3dd601e9f53121682d1a1190d0be4ea3b83eb
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1684
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoadd support for Atmel SAM4L NOR Flash 39/1639/13
Andrey Yurovsky [Thu, 19 Sep 2013 20:59:09 +0000 (13:59 -0700)]
add support for Atmel SAM4L NOR Flash

This adds a new NOR Flash driver, "at91sam4l", which supports the
built-in Flash on Atmel's low-power SAM4L family of Cortex M4 MCUs.
Parts and their geometry are detected automatically using the Chip ID
and lookup schemes described in document 42023E–SAM–07/2013.

Tested on AT91SAM4LC4CA via the SAM4L XPlained Pro development kit.

Change-Id: If73499dee92cc8ce231845244ea25c6984f6cecd
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1639
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agocfg: add initial Atmel xplained kit support 25/1625/9
Spencer Oliver [Mon, 4 Nov 2013 21:24:39 +0000 (21:24 +0000)]
cfg: add initial Atmel xplained kit support

These kits feature a CMSIS-DAP compliant debugger and so have been added
as part of the pending support.

Currently the flash drivers for the L8 and D20 are wip.

One issue this implementation of CMSIS-DAP raised is that it supports
512byte HID reports, however using the current HIDAPI we have no cross platform
way of querying this info. Long term we plan to add this support to HIDAPI.

Change-Id: Ie8b7c871f58a099d963cd71a9f8a0105a38784e9
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1625
Tested-by: jenkins
7 years agocfg: add stm32 cmsis-dap compliant config 43/1543/16
Spencer Oliver [Tue, 6 Aug 2013 12:12:10 +0000 (13:12 +0100)]
cfg: add stm32 cmsis-dap compliant config

Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/1543
Tested-by: jenkins
7 years agocmsis-dap: add initial cmsis-dap support 42/1542/19
Spencer Oliver [Thu, 19 Dec 2013 21:33:19 +0000 (21:33 +0000)]
cmsis-dap: add initial cmsis-dap support

This is based on work from:
https://github.com/TheShed/OpenOCD-CMSIS-DAP/tree/cmsis-dap

Main changes include moving over to using HIDAPI rather than libusb-1.0
and cleaning up to merge into master. Support for reset using srst has
also been added.

It has been tested on all the mbed boards as well as the Freedom board
from Freescale. These boards only implement SWD mode, however JTAG mode
has been tested with a Keil ULINK2 and a stm32 target - but requires a lot
more work.

Change-Id: I96d5ee1993bc9c0526219ab754c5aad3b55d812d
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-on: http://openocd.zylin.com/1542
Tested-by: jenkins
7 years agocommand: Fix formatting for empty usage string 58/1858/2
Andreas Fritiofson [Wed, 8 Jan 2014 15:56:30 +0000 (16:56 +0100)]
command: Fix formatting for empty usage string

Introduced by requirement in 54d6330b.

Change-Id: If3dba057127b54b15ca7f364f37c6286d34f77e0
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1858
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotcl/netgear-dg834v3.cfg: add to easy firmware recovery list 51/1851/5
Paul Fertser [Mon, 30 Dec 2013 19:09:51 +0000 (23:09 +0400)]
tcl/netgear-dg834v3.cfg: add to easy firmware recovery list

Change-Id: I6e5205ec41c58dc2fe3fb0051c30918507ef1e88
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1851
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotools: add firmware recovery helpers 50/1850/5
Paul Fertser [Mon, 30 Dec 2013 18:33:43 +0000 (22:33 +0400)]
tools: add firmware recovery helpers

This adds a set of helper functions with the aim to make it possible
to flash mass-market devices without RTFMing altogether (i.e. to
obsolete GPL-violating proprietary tjtag and other similar software).

Real-life tested on an RT-N16 and WRT54GL.

Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1850
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotcl/board: add Linksys WRT54GL v1.1 board config 52/1852/3
Paul Fertser [Tue, 31 Dec 2013 15:07:47 +0000 (19:07 +0400)]
tcl/board: add Linksys WRT54GL v1.1 board config

Tested flashing a real v1.1 device.

Change-Id: Ie0d202b9fded8b92e731d93e0ef17be415a75fc8
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1852
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotcl: add bcm47xx config and Asus RT-N16 board using it 49/1849/2
Paul Fertser [Mon, 30 Dec 2013 18:26:36 +0000 (22:26 +0400)]
tcl: add bcm47xx config and Asus RT-N16 board using it

This adds the bcm47xx config with the special undocumented trick to
put it into standard EJTAG mode from the mystic "LV mode".

The RAM setup is not done as it would require considerable efforts
without much practical gain.

The only issue I noticed so far is that "reset" doesn't actually reset
the chip.

Unfortunately, it's unclear how to make it work properly with SRST as
OpenOCD asserts it in MIPS-specific code so the device will enter LV
mode again but the LV tap is already disabled by that time, so it's
not possible to send the magic command again.

Anyway, this config is more than enough to "recover" any RT-N16
provided the hardware is not damaged.

Change-Id: I0894e339763e6d20d1c93341c597382b479d039b
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/1849
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoAllow "tcl_port" to be run after config to simply display the port. 57/1857/2
Robert P. J. Day [Wed, 8 Jan 2014 16:43:25 +0000 (11:43 -0500)]
Allow "tcl_port" to be run after config to simply display the port.

To be consistent with gdb_port and telnet_port, allow tcl_port
to be run to display the configured port number, while still
not allowing the user to change it after configuration.

Change-Id: Ibe6aedb3bd447f2985e42dd8246358481a047dd6
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1857
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoUpdate URLs and names in amdm37x.cfg, no functional changes. 56/1856/2
Robert P. J. Day [Wed, 8 Jan 2014 16:22:01 +0000 (11:22 -0500)]
Update URLs and names in amdm37x.cfg, no functional changes.

* openocd.berlios.de -> openocd.sourceforge.net
* Update link to AM/DM37x Technical Reference Manual (ver R)
* "ICEpick" is properly spelled "ICEPick" according to TI

Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1856
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoNumerous pedantic fixes to the User's Guide, including typo fixes, 55/1855/2
Robert P. J. Day [Wed, 8 Jan 2014 15:17:56 +0000 (10:17 -0500)]
Numerous pedantic fixes to the User's Guide, including typo fixes,
grammar fixes and so on.

Change-Id: Iaeb603447ecd9f77f1d49ce77044431442f4f219
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Reviewed-on: http://openocd.zylin.com/1855
Reviewed-by: Bill Traynor <btraynor@gmail.com>
Tested-by: jenkins
Reviewed-by: Francois Lorrain <francois.lorrain@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agojtag_vpi: make the server address configurable 40/1840/5
Franck Jullien [Sun, 29 Dec 2013 15:18:51 +0000 (16:18 +0100)]
jtag_vpi: make the server address configurable

Change-Id: I58e89c789b79ffb0b54ef94d208be876c271ddf7
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1840
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotarget/image: allow for comments in IHEX files 42/1842/2
Franck Jullien [Tue, 24 Dec 2013 09:07:14 +0000 (10:07 +0100)]
target/image: allow for comments in IHEX files

This is not in the Intel hex file format specification but
some hex files may include comments (i.e. Altera USB-Blaster II
firmware) starting with '#'.

This patch makes image_ihex_buffer_complete_inner to skip
comment lines.

Change-Id: Id1f57d84d75da45e592f1c72b2b8c29193bc14e3
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1842
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotopic: Added Spansion S25FL128S and S25FL256S spifi devices. 44/1844/2
Steve Moorby [Sat, 28 Dec 2013 15:23:41 +0000 (15:23 +0000)]
topic: Added Spansion S25FL128S and S25FL256S spifi devices.

S25FL256S device tested on mbest LPC4357 EVM, S25S128S untested but
from the same data sheet.

Change-Id: Idf58416aab08671fe29d22c3c34c2118b25a9d45
Signed-off-by: Steve Moorby <steve.moorby60@gmail.com>
Reviewed-on: http://openocd.zylin.com/1844
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
7 years agokinetis : Add timeouts to flash status checking in dap_syssec_kinetis_mdmap(). 19/1819/2
Per Ekman [Fri, 29 Nov 2013 07:11:44 +0000 (08:11 +0100)]
kinetis : Add timeouts to flash status checking in dap_syssec_kinetis_mdmap().

Change-Id: Ifc8fe7aa4c2a40a78fa0655435e82418f549bad3
Signed-off-by: Per Ekman <pekenator@gmail.com>
Reviewed-on: http://openocd.zylin.com/1819
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agostlink: remove stlink_api command 60/1760/4
Mathias K [Sun, 10 Nov 2013 08:13:53 +0000 (09:13 +0100)]
stlink: remove stlink_api command

Remove stlink_api command.

Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/1760
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agokinetis : Detect MCU flash parameters based on the SDID register. 23/1823/2
Per Ekman [Fri, 29 Nov 2013 10:30:07 +0000 (11:30 +0100)]
kinetis : Detect MCU flash parameters based on the SDID register.

Try to detect the flash parameters based on the MCU SDID register. The hope
is that this works for K and KL series MCUs but it has only been tested on
a K21. YMMV.

Change-Id: Idfe71383a449065267f393b09ee3c3b24ac6a803
Signed-off-by: Per Ekman <pekenator@gmail.com>
Reviewed-on: http://openocd.zylin.com/1823
Tested-by: jenkins
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoAdd %APPDATA%\OpenOCD to script search path on win 97/1797/2
Andreas Fritiofson [Tue, 30 Jul 2013 20:56:57 +0000 (22:56 +0200)]
Add %APPDATA%\OpenOCD to script search path on win

Change-Id: I01e9715fe064f3ff41e41a59a4764d6474f82183
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1797
Tested-by: jenkins
Reviewed-by: Jens Bauer <jens@gpio.dk>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoRemove special handling of script search path on Windows 96/1796/2
Andreas Fritiofson [Sat, 27 Jul 2013 15:27:01 +0000 (17:27 +0200)]
Remove special handling of script search path on Windows

On all platforms, search for scripts in
$HOME/.openocd
${run_prefix}${pkgdatadir}/site
${run_prefix}${pkgdatadir}/scripts

On Windows, set run_prefix to the runtime path of the executable, minus
${bindir}. This is to enable the install dir to be moved anywhere, as long
as the structure of the install dir is kept intact. On all other platforms,
run_prefix is empty.

The script paths can now be adjusted on Windows builds the normal way; by
overriding pkgdatadir at build time. For example, to create a Windows
package layout of

bin/openocd.exe
scripts/interface/...
scripts/target/...

you can do
configure --prefix= --enable-... and then
make pkgdatadir= DESTDIR=/some/path clean all install

Also, remove the unused PKGLIBDIR define.

Change-Id: If2c8228fc80c598d763efad21c5f51695ff9b6cf
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1796
Tested-by: jenkins
Reviewed-by: Jens Bauer <jens@gpio.dk>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agotarget/imx6: Fix typo in setting _SJC_TAPID from SJC_TAPID variable 11/1811/2
Alex Murray [Tue, 19 Nov 2013 22:47:04 +0000 (09:17 +1030)]
target/imx6: Fix typo in setting _SJC_TAPID from SJC_TAPID variable

The set command was missing the $ prefix on the SJC_TAPID variable
and so would fail if SJC_TAPID was set

Change-Id: Ib9af58f5188bd8a2bc3f888309f203d624476c27
Signed-off-by: Alex Murray <alex.murray@cohdawireless.com>
Reviewed-on: http://openocd.zylin.com/1811
Tested-by: jenkins
Reviewed-by: Jens Bauer <jens@gpio.dk>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agoAvoid 'may be used uninitialized' warning from FreeBSD base GCC 35/1835/2
Ed Maste [Wed, 18 Dec 2013 16:18:14 +0000 (11:18 -0500)]
Avoid 'may be used uninitialized' warning from FreeBSD base GCC

Change-Id: Ice2472bf7a467652485a5a8c36880c6a47d64c6c
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-on: http://openocd.zylin.com/1835
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agobuild: remove hard coded ftdi and usb libraries 59/1759/13
Mathias K [Wed, 30 Oct 2013 15:52:10 +0000 (16:52 +0100)]
build: remove hard coded ftdi and usb libraries

This patch remove the hardcoded libraries. Also a check for
libftdi1 installations was added. This check fix an issue
with gentoo and maybe other systems.

Change-Id: Ieff9ec4d66ee0f3e6b22261a10e4cab9f26b6b51
Signed-off-by: Mathias K <kesmtp@freenet.de>
Reviewed-on: http://openocd.zylin.com/1759
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
7 years agojtag_vpi: fix build errors under MinGW 39/1839/2
Franck Jullien [Sat, 21 Dec 2013 20:54:40 +0000 (21:54 +0100)]
jtag_vpi: fix build errors under MinGW

Change-Id: Ic13f9982014ead811e2f2d737ca1621e0e85577e
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Reviewed-on: http://openocd.zylin.com/1839
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)