ntfreak [Sat, 16 Feb 2008 15:10:26 +0000 (15:10 +0000)]
- cleanup and remove time() warning
git-svn-id: svn://svn.berlios.de/openocd/trunk@299
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 16 Feb 2008 14:05:32 +0000 (14:05 +0000)]
- fix issue with telnet prompt while gdb running
git-svn-id: svn://svn.berlios.de/openocd/trunk@298
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 15 Feb 2008 19:07:43 +0000 (19:07 +0000)]
- fix xscale memory leak and warnings. Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@297
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 14 Feb 2008 18:32:52 +0000 (18:32 +0000)]
- fix programming issue with lpc2101/2
git-svn-id: svn://svn.berlios.de/openocd/trunk@296
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Thu, 14 Feb 2008 18:30:23 +0000 (18:30 +0000)]
- added patch to stop DEBUG messages to be forwarded to telnet/gdb.
(thanks to Øyvind for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@295
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 14 Feb 2008 10:02:51 +0000 (10:02 +0000)]
- added check for revA silicon in stm32 flash driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@294
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Wed, 13 Feb 2008 19:02:17 +0000 (19:02 +0000)]
- added patch to Improving progress/error output for telnet & GDB monitor
(thanks to Øyvind for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@293
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 12 Feb 2008 18:57:37 +0000 (18:57 +0000)]
- add autoprobe support to flash info command
- auto_erase can now be called from script/config file
git-svn-id: svn://svn.berlios.de/openocd/trunk@292
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Mon, 11 Feb 2008 17:53:14 +0000 (17:53 +0000)]
- removed "starting point" for ngw100, will add it again if it is working
git-svn-id: svn://svn.berlios.de/openocd/trunk@291
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 11 Feb 2008 09:11:50 +0000 (09:11 +0000)]
- telnet prompt behaves correctly for new synchronous halt/resume/reset commands
- removed unused variables in tms470.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@290
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 10 Feb 2008 19:04:31 +0000 (19:04 +0000)]
- added starting point for development on a ngw100 eval board
git-svn-id: svn://svn.berlios.de/openocd/trunk@289
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sun, 10 Feb 2008 15:46:14 +0000 (15:46 +0000)]
- stm32 flash driver now checks for correct target
git-svn-id: svn://svn.berlios.de/openocd/trunk@288
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sun, 10 Feb 2008 15:08:44 +0000 (15:08 +0000)]
- add autoprobe support to the stm32 flash driver
git-svn-id: svn://svn.berlios.de/openocd/trunk@287
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 10 Feb 2008 12:58:24 +0000 (12:58 +0000)]
- added patch to change pathmove handling
https://lists.berlios.de/pipermail/openocd-development/2008-January/000678.html
(thanks to Øyvind for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@286
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 9 Feb 2008 11:44:17 +0000 (11:44 +0000)]
- added synchronous wait/resume patch. Thanks Øyvind Harboe
- updated docs for halt and wait_halt and resume commands
git-svn-id: svn://svn.berlios.de/openocd/trunk@285
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 7 Feb 2008 20:20:11 +0000 (20:20 +0000)]
- added synchronous reset patch, Thanks Øyvind Harboe
- added target_init_reset which calls target_process_reset after all drivers have been initialised
git-svn-id: svn://svn.berlios.de/openocd/trunk@284
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Wed, 6 Feb 2008 19:59:55 +0000 (19:59 +0000)]
- added patch to access cp15 register (XScale)
(thanks to Edgar Grimberg for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@283
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Wed, 6 Feb 2008 19:25:42 +0000 (19:25 +0000)]
- added patch to solve problem with AT91SAM9260 (dirty register)
(thanks to Øyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@282
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 4 Feb 2008 20:12:46 +0000 (20:12 +0000)]
- fixes issue with reset and arm926ejs core. Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@281
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 4 Feb 2008 08:25:07 +0000 (08:25 +0000)]
Added patch to stop SEGFAULT with missing jtag config lines. Thanks Øyvind Harboe
https://lists.berlios.de/pipermail/openocd-development/2008-January/000731.html
git-svn-id: svn://svn.berlios.de/openocd/trunk@280
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sat, 2 Feb 2008 13:42:37 +0000 (13:42 +0000)]
- added patch to solve the reset problem with arm9 and cortex which Spen had found.
https://lists.berlios.de/pipermail/openocd-development/2008-January/000729.html
(Thanks to Spen for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@279
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 27 Jan 2008 14:05:59 +0000 (14:05 +0000)]
- added autoprobe functionality
- corrected blocksize handling from GDB "info mem" command
(thanks to Øyvind and Spen for these patches)
git-svn-id: svn://svn.berlios.de/openocd/trunk@278
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 25 Jan 2008 18:09:21 +0000 (18:09 +0000)]
fixed incorrect elf segment size - Thanks Øyvind Harboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@277
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Thu, 24 Jan 2008 21:04:09 +0000 (21:04 +0000)]
- added patch to check some malloc problems.
(thanks to Øyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@276
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mlu [Wed, 23 Jan 2008 20:09:08 +0000 (20:09 +0000)]
Updated list of LMI partnames
git-svn-id: svn://svn.berlios.de/openocd/trunk@275
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Wed, 23 Jan 2008 19:28:10 +0000 (19:28 +0000)]
- added patch to fix crash in load_image on corrupt elf file or out of memory.
(thanks to Øyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@274
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Tue, 22 Jan 2008 17:54:56 +0000 (17:54 +0000)]
- added patch to fix brocken STR9 line
(thanks to oyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@273
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 21 Jan 2008 20:51:01 +0000 (20:51 +0000)]
- Added example config and startup-script for a XScale IXP42x system
git-svn-id: svn://svn.berlios.de/openocd/trunk@272
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 21 Jan 2008 20:34:58 +0000 (20:34 +0000)]
[MERGE] Merged all remaining changes between trunk and xscale big-endian branch.
They are now in sync.
xscale-be branch is now closed.
git-svn-id: svn://svn.berlios.de/openocd/trunk@271
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 21 Jan 2008 19:45:28 +0000 (19:45 +0000)]
- Synced code with branch
git-svn-id: svn://svn.berlios.de/openocd/trunk@270
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 21 Jan 2008 19:34:45 +0000 (19:34 +0000)]
- Eleminated leading tabs/white space
git-svn-id: svn://svn.berlios.de/openocd/trunk@268
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 21 Jan 2008 17:29:17 +0000 (17:29 +0000)]
- Eleminated leading tabs/white space
git-svn-id: svn://svn.berlios.de/openocd/trunk@267
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 21 Jan 2008 17:09:12 +0000 (17:09 +0000)]
- Eleminated leading tabs/white space
- Updated SVN property
git-svn-id: svn://svn.berlios.de/openocd/trunk@265
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 21 Jan 2008 11:05:35 +0000 (11:05 +0000)]
- updated docs for cfi command, added missing ft2232_layout names
git-svn-id: svn://svn.berlios.de/openocd/trunk@261
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 20 Jan 2008 13:52:06 +0000 (13:52 +0000)]
- added patch "remove error handler as planned"
https://lists.berlios.de/pipermail/openocd-development/2008-January/000665.html
(thanks to oyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@260
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 17 Jan 2008 12:45:06 +0000 (12:45 +0000)]
- add support for cortex_m3 target_request debugmsgs
- target request handler disabled by default until a target has been registered
git-svn-id: svn://svn.berlios.de/openocd/trunk@259
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 17 Jan 2008 08:02:02 +0000 (08:02 +0000)]
- add missing files from previous commit (tms470 flash driver)
git-svn-id: svn://svn.berlios.de/openocd/trunk@258
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Thu, 17 Jan 2008 07:24:05 +0000 (07:24 +0000)]
- fixed 'make distcheck' (thanks to Theodore A. Roth for this patch
git-svn-id: svn://svn.berlios.de/openocd/trunk@257
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Thu, 17 Jan 2008 07:21:09 +0000 (07:21 +0000)]
- added tms470 flash support (thanks to Chris Kilgour for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@256
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Mon, 14 Jan 2008 21:42:30 +0000 (21:42 +0000)]
- use correct SCAN_N check value (disabled by default)
- add Øyvind Harboe to list of AUTHORS (thanks a lot to Øyvind for his hard work)
git-svn-id: svn://svn.berlios.de/openocd/trunk@255
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 11 Jan 2008 20:38:43 +0000 (20:38 +0000)]
- debug handler file not closed - (thanks to oyvind harboe for the patch)
- arm_simulate_step called incorrect arm_evaluate_opcode when in thumb mode
git-svn-id: svn://svn.berlios.de/openocd/trunk@254
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 10 Jan 2008 20:10:53 +0000 (20:10 +0000)]
- fix gdb packet retransmission omission
git-svn-id: svn://svn.berlios.de/openocd/trunk@253
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 10 Jan 2008 19:34:33 +0000 (19:34 +0000)]
- _DEBUG_GDB_IO_ was left on by mistake
git-svn-id: svn://svn.berlios.de/openocd/trunk@252
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 10 Jan 2008 19:29:52 +0000 (19:29 +0000)]
- added faster gdb packet handling (thanks to oyvind harboe for the patch)
- code reformat
git-svn-id: svn://svn.berlios.de/openocd/trunk@251
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Thu, 10 Jan 2008 19:10:55 +0000 (19:10 +0000)]
- added patch for faster start of OpenOCD
(thanks to oyvind harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@250
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Wed, 9 Jan 2008 15:58:01 +0000 (15:58 +0000)]
- rename flash_init and flash_erase to flash_init_drivers and flash_erase_address_range - stops conflicts with redboot. Thanks Øyvind Harboe
- gdb connection not dropped if we fail to allocate memory in query packets
git-svn-id: svn://svn.berlios.de/openocd/trunk@249
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Mon, 7 Jan 2008 17:11:11 +0000 (17:11 +0000)]
- added gdb flash fixes patch
https://lists.berlios.de/pipermail/openocd-development/2007-December/000548.html
- added synthesize in_check_mask/value and error handler patch
https://lists.berlios.de/pipermail/openocd-development/2008-January/000554.html
(thanks to oyvind harboe for these patches)
git-svn-id: svn://svn.berlios.de/openocd/trunk@248
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 29 Dec 2007 17:41:43 +0000 (17:41 +0000)]
- add support for extended gdb packet R (restart), requires gdb to be started with target extended-remote
git-svn-id: svn://svn.berlios.de/openocd/trunk@247
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Sat, 29 Dec 2007 13:51:48 +0000 (13:51 +0000)]
- minimum autoconf 2.59 is now required and verified - due to issues with AS_HELP_STRING
- native win32 now handles WSAECONNRESET - no longer exits openocd
- qCRC packet now works correctly under cygwin (gdb compare-sections command)
- removed __USE_GNU define from gdbserver.c
- gdb qSupported packet is now handled, with this we are able to tell gdb packet size, memory map of target
- added new target script gdb_program_config - called before gdb flash programming
- new gdb server command gdb_memory_map (enable|disable> - default is disable
- new gdb server command gdb_flash_program (enable|disable> - default is disable
- gdb flash programming supported - vFlash packets
- image_elf_read_section now does not clear any remaining data, this was causing the gdb checksum to fail with certain files
- reformat of usbprog.c
- memory leak in command_print fixed
- updated texi doc to include new commands
- added gdb programming section to docs
git-svn-id: svn://svn.berlios.de/openocd/trunk@246
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 21 Dec 2007 16:21:05 +0000 (16:21 +0000)]
- corrected working_area of LPC2129 script
- added LPC2148 script
- corrected size of the working_area of the LPC2294 script
git-svn-id: svn://svn.berlios.de/openocd/trunk@245
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 20 Dec 2007 22:20:45 +0000 (22:20 +0000)]
- fixed problem when write_image is called multiple times
git-svn-id: svn://svn.berlios.de/openocd/trunk@244
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Thu, 20 Dec 2007 16:19:10 +0000 (16:19 +0000)]
- removed flash write_image - binary compare function has been moved to verify_image command
- minor code reformat and cleanup
- updated docs to include new commands
git-svn-id: svn://svn.berlios.de/openocd/trunk@243
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Wed, 19 Dec 2007 21:14:50 +0000 (21:14 +0000)]
- this patch allows OpenOCD running under eCos to access files via tftp
(thanks to oyvind Harboe for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@242
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Tue, 18 Dec 2007 21:29:44 +0000 (21:29 +0000)]
- added patch by Øyvind Harboe to Intel Hex Start Segment Address Record (Type 3)
- added support to parse Motorola Record Count (S5)
git-svn-id: svn://svn.berlios.de/openocd/trunk@241
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Tue, 18 Dec 2007 21:20:28 +0000 (21:20 +0000)]
- added patch for new flash functionality like:
flash verify_image and flash erase_address.
- added patch for new parport_write_on_exit command.
Even this patch will fix some memory leaks.
(thanks too oyvind and Spen for these patches)
git-svn-id: svn://svn.berlios.de/openocd/trunk@240
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Mon, 17 Dec 2007 22:12:57 +0000 (22:12 +0000)]
- only some cosmetic changes, convert \r\n to unix
git-svn-id: svn://svn.berlios.de/openocd/trunk@239
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Mon, 17 Dec 2007 20:52:37 +0000 (20:52 +0000)]
- fixed relocation problems with image loading. Relocation is handled
in a single centralized place, and it now works for binaries.
(thanks to oyvind Harboe)
git-svn-id: svn://svn.berlios.de/openocd/trunk@238
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Mon, 17 Dec 2007 20:14:12 +0000 (20:14 +0000)]
- added patch to corrected argument of image_open in handle_flash_write_image_command
(thanks to oyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@237
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Mon, 17 Dec 2007 17:00:24 +0000 (17:00 +0000)]
The changes allows the "script" command to be used from within
config scripts to run sub-config scripts, which was probably the
original intention because "script" is registered as COMMAND_ANY.
This can be useful in e.g. splitting CPU and flash config scripts.
(thanks to oyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@236
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 16 Dec 2007 18:58:16 +0000 (18:58 +0000)]
- removed some compiler warnings
- added patch to fix problem in cfi_intel_write_block. In case of
cfi_info->write_algorithm is not NULL, target_code_size was not set.
(thanks to oyvind Harboe for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@235
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 16 Dec 2007 18:19:43 +0000 (18:19 +0000)]
- change error message for image_open error
- changed run_size to size_read in argument of image_read_section
(thanks to oyvind Harboe for this patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@234
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 16 Dec 2007 15:55:48 +0000 (15:55 +0000)]
- initialize num_sectors and sectors in handle_flash_bank_command.
(thanks to oyvind Harboe for this hint)
git-svn-id: svn://svn.berlios.de/openocd/trunk@233
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Sun, 16 Dec 2007 11:52:50 +0000 (11:52 +0000)]
- fixed ETM configuration register decoding
git-svn-id: svn://svn.berlios.de/openocd/trunk@232
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 14 Dec 2007 21:32:55 +0000 (21:32 +0000)]
- added the patch CFI-BE-Fixes-Blockwrite-Support.diff
(thanks to Carsten Schlote for the patch)
git-svn-id: svn://svn.berlios.de/openocd/trunk@231
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 14 Dec 2007 19:54:18 +0000 (19:54 +0000)]
Corrected typo (to many brackets)
git-svn-id: svn://svn.berlios.de/openocd/trunk@230
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 14 Dec 2007 19:15:32 +0000 (19:15 +0000)]
Sorry, I have forgotten to add a description for the last version, where
I have added the clear_malloc and fill_malloc functionality. But the default
is the original malloc.
git-svn-id: svn://svn.berlios.de/openocd/trunk@229
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 14 Dec 2007 19:08:03 +0000 (19:08 +0000)]
git-svn-id: svn://svn.berlios.de/openocd/trunk@228
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Fri, 14 Dec 2007 18:06:19 +0000 (18:06 +0000)]
- added patch from Dominic to unlock the ATMEL flash in cfi_read_atmel_pri_ext
- set cfi_info->write_algorithm and cfi_info->erase_check_algorithm to NULL to
get "flash erase_check" command working
git-svn-id: svn://svn.berlios.de/openocd/trunk@227
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Mon, 10 Dec 2007 19:46:04 +0000 (19:46 +0000)]
- Fixing two compiler warnings
- Reducing stack usage for recursive scripts
- Do not exit on bogus arguments to reset_config. No longer exit the application upon bogus arguments to reset_config, but return errors.
thanks to Øyvind Harboe for these patches.
git-svn-id: svn://svn.berlios.de/openocd/trunk@226
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 10 Dec 2007 18:47:26 +0000 (18:47 +0000)]
- Stripped trailing spaces (patch preparation)
git-svn-id: svn://svn.berlios.de/openocd/trunk@225
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 10 Dec 2007 18:41:10 +0000 (18:41 +0000)]
- Enabled URL keyword expansion for enhanced version
tracking of binary openocd images
git-svn-id: svn://svn.berlios.de/openocd/trunk@224
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 10 Dec 2007 18:34:40 +0000 (18:34 +0000)]
- Added PKGLIBDIR define to C options. Allows to store
native code fragments at a central place
git-svn-id: svn://svn.berlios.de/openocd/trunk@223
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 10 Dec 2007 17:49:28 +0000 (17:49 +0000)]
- XScale DebugHandler code is now installed into
pkglibdir and loaded from there
git-svn-id: svn://svn.berlios.de/openocd/trunk@222
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Mon, 10 Dec 2007 16:55:14 +0000 (16:55 +0000)]
Changed openocd version info creation to be more useful.
- Now displays subversion revision and svn URL
git-svn-id: svn://svn.berlios.de/openocd/trunk@220
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mifi [Sun, 9 Dec 2007 15:36:21 +0000 (15:36 +0000)]
- added patch to display device information as INFO too
- added patch which fixes a crash upon flash write error
- added patch which will improve the reset handling when
SRST is tied to TRST
(thanks to Oyvind Harboe for these patches)
git-svn-id: svn://svn.berlios.de/openocd/trunk@218
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
bodylove [Wed, 5 Dec 2007 13:34:02 +0000 (13:34 +0000)]
Merged rev 215 changes from /branches/xscale-ixp-be into trunk:
- Obvious fixes to big endian type conversion macros
- Fixed obvious typos for byte masks
git-svn-id: svn://svn.berlios.de/openocd/trunk@217
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
vpalatin [Tue, 4 Dec 2007 12:56:46 +0000 (12:56 +0000)]
Do not overwrite code when removing software breakpoint if it no longer contains bkpt instruction.
(thanks to oyvind harboe for bug report and test)
git-svn-id: svn://svn.berlios.de/openocd/trunk@214
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 23 Nov 2007 15:16:22 +0000 (15:16 +0000)]
- added support for Hitex STM32 Performance Stick
- added str9 and stm32 scripts to docs
git-svn-id: svn://svn.berlios.de/openocd/trunk@213
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Wed, 21 Nov 2007 16:37:17 +0000 (16:37 +0000)]
- reset_run now works as expected on cortex-m3
- str9xpec erase status checked on option byte programming
- stm32x flash driver now supports sector protection
- surplus exit removed from flash.c
- openocd.texi documentation added
git-svn-id: svn://svn.berlios.de/openocd/trunk@212
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Fri, 26 Oct 2007 09:05:57 +0000 (09:05 +0000)]
- corrected str91x bank1 programming issues
- str91x protect_check fixed
- bank number now correctly given to str91x flash_config command
git-svn-id: svn://svn.berlios.de/openocd/trunk@211
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 22 Oct 2007 08:44:34 +0000 (08:44 +0000)]
- add verify_image command
- add support for gdb qCRC packet (compare-sections command)
git-svn-id: svn://svn.berlios.de/openocd/trunk@210
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 8 Oct 2007 13:12:39 +0000 (13:12 +0000)]
- cleaned up str7, str9 and stm32 flash drivers
- str7 flash driver now checks correct busy bits depending on device
- str9 flash driver now disables ITCM order as per st programming manual
- added str7 disable_jtag command
- added gdb_detach command
- updated arm966e cp15 support
- fix crash on mingw build when enabling target_request debugmsgs
git-svn-id: svn://svn.berlios.de/openocd/trunk@209
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 1 Oct 2007 08:31:30 +0000 (08:31 +0000)]
- flash autoerase <on|off> cmd added, default is off - flash banks are calculated and erased prior to write (flash write_image only)
- corrected array overrun in armv7m.c
- corrected breakpoint memory allocation bug
- image read now uses fgets, vastly improves reading of large files
- improved hex file reading, support for Linear Address Record added
git-svn-id: svn://svn.berlios.de/openocd/trunk@208
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mlu [Mon, 10 Sep 2007 17:43:08 +0000 (17:43 +0000)]
- Fixed display of sector sizes in flash.c
- Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code
- Move restore_context from cortex_m3 to armv7m
- Updated halt handling for cortex_m3
git-svn-id: svn://svn.berlios.de/openocd/trunk@206
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mlu [Mon, 10 Sep 2007 17:07:32 +0000 (17:07 +0000)]
- added ft2232_latency command
git-svn-id: svn://svn.berlios.de/openocd/trunk@205
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Wed, 5 Sep 2007 06:22:37 +0000 (06:22 +0000)]
Patch by Michael Schwingen that
- adds support for the Altium universal JTAG cable
- adds support for "wiggler2" cable (basically a wiggler with added LED, documentation coming soon)
- adds LED support. The LED is turned on during data transfer - works fine on Altium and wiggler2.
- adds PORT_EXIT pattern that is written to port when exiting, in order to turn off power on cables that get their power from parallel port data lines
- move port writes (with the system-specific ifdefs) to one central function
- increased image cache size to 2KB (might require more adaptive cache handling, e.g. LRU)
git-svn-id: svn://svn.berlios.de/openocd/trunk@204
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Sat, 25 Aug 2007 09:59:42 +0000 (09:59 +0000)]
- added support for setting JTAG frequency on ASIX PRESTO (thanks to Pavel Chromy)
- usbprog update (thanks to Benedikt Sauter)
- added embeddedice_send and _handshake functions (thanks to Pavel Chromy)
- added support for 4, 8 and 16 bit ports to etb.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@203
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Tue, 21 Aug 2007 16:21:05 +0000 (16:21 +0000)]
- correctly initialize start address for XScale trace buffer decodes in fill-once mode
git-svn-id: svn://svn.berlios.de/openocd/trunk@202
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mlu [Mon, 20 Aug 2007 11:51:12 +0000 (11:51 +0000)]
- Support for AT91SAM7xx512 chips
git-svn-id: svn://svn.berlios.de/openocd/trunk@201
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
mlu [Mon, 20 Aug 2007 11:43:07 +0000 (11:43 +0000)]
- Support for AT91SAM7xx512 chips
git-svn-id: svn://svn.berlios.de/openocd/trunk@200
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Mon, 20 Aug 2007 10:08:08 +0000 (10:08 +0000)]
- update file size when writing to a fileio
git-svn-id: svn://svn.berlios.de/openocd/trunk@199
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Fri, 17 Aug 2007 08:58:40 +0000 (08:58 +0000)]
- renamed "xscale dump_trace_buffer" to "xscale dump_trace" and added code for it
git-svn-id: svn://svn.berlios.de/openocd/trunk@198
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Thu, 16 Aug 2007 13:12:48 +0000 (13:12 +0000)]
- update jtag_speed setting when changing it during runtime with a FT2232 based interface
- use 'etm trigger_percent' setting when programming ETB trigger count
- fixed some small bugs in ETM trace analysis
- fixed minor bug in flash writing (thanks to Pavel Chromy)
git-svn-id: svn://svn.berlios.de/openocd/trunk@197
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Thu, 16 Aug 2007 09:09:44 +0000 (09:09 +0000)]
- fixed several bugs in flash writing code (thanks to Pavel Chromy)
git-svn-id: svn://svn.berlios.de/openocd/trunk@196
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Tue, 14 Aug 2007 10:05:40 +0000 (10:05 +0000)]
- corrected automake script
git-svn-id: svn://svn.berlios.de/openocd/trunk@195
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Tue, 14 Aug 2007 09:48:54 +0000 (09:48 +0000)]
- reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not functional yet). Configure option changed from --enable-presto to
--enable-presto_ftd2xx and --enable-presto_libftdi
- completed trace point support for use with ARM7/9 DCC
- completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities)
- fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy)
- fixed bug in image_add_section (thanks to Pavel Chromy)
- at91sam7 sector erase reworked (thanks to Pavel Chromy)
- merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets
git-svn-id: svn://svn.berlios.de/openocd/trunk@194
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
ntfreak [Mon, 13 Aug 2007 12:51:31 +0000 (12:51 +0000)]
- fix build issues when not using autoconf/automake to build
git-svn-id: svn://svn.berlios.de/openocd/trunk@193
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Fri, 10 Aug 2007 20:25:59 +0000 (20:25 +0000)]
- bumped version information
git-svn-id: svn://svn.berlios.de/openocd/trunk@192
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Fri, 10 Aug 2007 20:21:35 +0000 (20:21 +0000)]
- changed mingw host detection to *-mingw instead of *-*-mingw to work with i586-mingw32msvc-gcc
- add replacements.h to log.h to make sure ERROR is undefined on windows
git-svn-id: svn://svn.berlios.de/openocd/trunk@191
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
drath [Fri, 10 Aug 2007 19:44:06 +0000 (19:44 +0000)]
- renamed M5960 USB JTAG to "flyswatter"
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin)
- various whitespace fixes
- removed various warnings
- add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann)
- fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin)
- switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed)
- added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include
semihosting, all ARM7/9 only for now)
- added support for GDB vFlashXXX packets (thanks to Pavel Chromy)
- added support for receiving data via ARM7/9 DCC
- reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash
write_image' (write image files (bin, hex, elf, s19) to a target).
- added support for AMD/ST/SST
29F400B non-cfi flashes
git-svn-id: svn://svn.berlios.de/openocd/trunk@190
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)