target/arm: opcodes: rename CamelCase symbols and uppercase variables

No major cross dependencies, mostly changes internal to each
file/function.

Change-Id: I1325560ef0350517d86d4927cb17ceaae81b75d2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6340
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Xiang W <wxjstz@126.com>

target/cortex_m: rename CamelCase symbol

Change-Id: I67d803e15ba9fd08f2b31361fb3604275e483605
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6339
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Xiang W <wxjstz@126.com>

target/arm: rename CamelCase symbols

No major cross dependencies, mostly changes internal to each
file/function.

Change-Id: I3f0879f0f33c6badc36a0dc60229323978a7e280
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6338
Tested-by: jenkins
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Xiang W <wxjstz@126.com>

tcl: Adapt config files to new ftdi command syntax

The patch was created automatically using the following
script:

%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
(cat << EOF
ftdi_device_desc ftdi device_desc
ftdi_serial ftdi serial
ftdi_channel ftdi channel
ftdi_layout_init ftdi layout_init
ftdi_layout_signal ftdi layout_signal
ftdi_set_signal ftdi set_signal
ftdi_get_signal ftdi get_signal
ftdi_vid_pid ftdi vid_pid
ftdi_tdo_sample_edge ftdi tdo_sample_edge
EOF
) | while read a b; do
sed -i "s/$a/$b/g" $(find tcl -type f -name "*.cfg" )
done
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---

Change-Id: Iff781f37bb5511b7e15cbe6dcdf6d28e89fb174f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6333
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

drivers/ftdi: Group adapter commands

Use a command group 'ftdi' with subcommands instead of individual
commands with 'ftdi_' prefix.

The old commands are still available for backward compatibility but
marked as deprecated.

Change-Id: I93a0ae7070226cd2fdea566effeb14a141269de8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6332
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target: add support for 64bit data in mem2array and array2mem

- Added support for reading and writing 64-bit data items
  using TCL commands "mem2array" and "array2mem". Until now,
  data items only up to 32 bits were supportd.

- Cleaned up functions target_array2mem() and
  target_mem2array(), especially data types of variables
  and variable declarations (scope).

Change-Id: Ia0ba427804f8fd8d7568f12714ab36984d6d5e24
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: http://openocd.zylin.com/6286
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target: add 64-bit address array command support

Add 64-bit address support to the target mem2array and array2mem commands

Change-Id: Ibdcc076ca5581f4fd87e92318aab33907e22d6ce
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-on: http://openocd.zylin.com/6246
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/semihosting: Fix of close(): Never close standard streams

This change fixes behavior of the SEMIHOSTING_SYS_CLOSE operation.
It ensures that OpenOCD's own stdin/stdout/stderr streams are never
closed, not even if the target requests it via semihosting.

Change-Id: Ia85af5963d1a3516284fd834f7197369a8fb268c
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: http://openocd.zylin.com/6291
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/semihosting: Capture errno in SEMIHOSTING_SYS_ISTTY

Capture the value of "errno" in semihosting isatty() call,
as is done in other syscalls.

Change-Id: I41b72175635f06c000536f583e3efa30fb57379e
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: http://openocd.zylin.com/6292
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl/interface/ftdi: Fix Digilent JTAG-SMT2 config

Drive the output enable for TMS and TDI

Change-Id: Ib23afd2f5149d4ce402d88781e68dcf0f074f395
Signed-off-by: Patrick Stewart <patstew@gmail.com>
Reviewed-on: http://openocd.zylin.com/4179
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>

config/ftdi: Add tristate capability to sheevaplug config

The legacy ft2232 driver suggests that the adapter has tristate
buffers on both nSRST and nTRST, even though they were not used as
such.

Change-Id: I971692ea6b3439ac93311b89877825a5cc21df46
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/3663
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl: Update Flyswatter product links

The Flyswatter URL is dead and requires us to use web.archive.org since
the product is discontinued. The Flyswatter 2 is still active and
accessible at a different URL.

Change-Id: Ib2d9de70a9728b0f0ef73f5e479bca81f958442c
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-on: http://openocd.zylin.com/6337
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/cortex_a: Replace printf() with LOG_DEBUG()

Change-Id: I38fa8e21959b398033741cbd779b632d572c7ce4
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6336
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/aarch64: Replace printf() with LOG_DEBUG()

Change-Id: If32bc320c48259dec4b81d457b848e972bcda784
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6335
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/mips64: Replace printf() with LOG_ERROR()

Change-Id: I73956dc3485a23b761aecd869cc37d657c393bde
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6334
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Add RTOS memory read/write functions.

If not implemented, these specify to regular target read/write. However,
if individual threads in an RTOS can have different address translation
configured then the RTOS support can use this to do the right thing.

Use this in hwthread, where of course address translation can be set up
differently for different real cores.

Change-Id: I62c501cff1f863d855ee197dee7b73204ea8885a
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/6327
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target: check return value of register get/set callbacks

- In "reg" TCL command handler, the return value of register get()
  and set() callbacks must be checked, in the same manner as it is
  done in e.g. gdb_set_register_packet() or gdb_get_register_packet().

- Minor cleanup of variable definitions in the "reg" command
  handler.

Change-Id: I8c57e7c087fe31d1abffa3c4d1f79a01af4c9c97
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: http://openocd.zylin.com/6293
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/stm8: Remove unused member 'stm8_common'

Change-Id: Ie8b59a82142bfdf2ee9395d38b1bedc27de728b8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6325
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/adiv5: Large Physical Address Extension

Provides ARM LPAE support to allow 64-bit TAR setting
on MEM AP accesses.

Tested on a 4-core ARM ARES Processor system using an
AXI Access Port.

Change-Id: I88f7a0a57a6abb58665032929194a41dd8729f6b
Signed-off-by: Kevin Burke <kevinb@os.amperecomputing.com>
Signed-off-by: Daniel Goehring <dgoehrin@os.amperecomputing.com>
Reviewed-on: http://openocd.zylin.com/5576
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

rtos/eCos: rename CamelCase symbols

Convert CamelCase enum in uppercase and the other symbols in
lowercase.

Change-Id: I141c55bdfe6ef2a2da28d1da15a283a644ae7cb2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6306
Tested-by: jenkins

rtos: rename CamelCase symbols

Only one exported symbol from eCos is included in this patch.
The eCos code is left untouched to prevent conflicts with patches
currently under review.

While there, remove an unused camelcase macro

Change-Id: I8d22dec6e243c00665d99a8b8ba00474b4f088db
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6305
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>

rtos: convert CamelCase enum in uppercase

The eCos code is not part of this patch to prevent conflicts with
patches currently under review.

Change-Id: I71369165f2eef419b83a79ffcff50287f77949c6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6304
Tested-by: jenkins

server: rename CamelCase symbols

No cross dependency, just changes internal to each file/function.

Change-Id: I04153a5720b0540bc1998bafe526d523b2ee5515
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6303
Tested-by: jenkins

jtag/swd: rename CamelCase macros

Change-Id: I4bce678b67d3d2347e88da9507820837697b5aa7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6302
Tested-by: jenkins

jtag: rename CamelCase symbols

No major cross dependency, just changes internal to each file or
function.

Change-Id: Ie6258a090ce53de5db65df6a77d57ac6bb899488
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6301
Tested-by: jenkins

helper: rename camelcase symbols

No cross dependency, just changes internal to each file/function.

Change-Id: I16568ddcd8304f5e6748c2e19f32421b047b0357
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6300
Tested-by: jenkins

flash: rename CamelCase symbols

Each driver is almost self-contained, with no cross dependency.
Changing symbol names in one drive does not impact the other.

Change-Id: Ic09f844f922a35cf0a9dc23fcd61d035b38308b3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6299
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>

flash/nor/cfi: fix CamelCase symbols in cfi_spansion_pri_ext

The struct cfi_spansion_pri_ext has few symbols in CamelCase.
Change all them accordingly to OpenOCD coding style.
Patch created automatically with the script below:

%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
(cat << EOF
VppMin          vpp_min
VppMax          vpp_max
TopBottom       top_bottom
TmpBlkUnprotect tmp_blk_unprotected
SimultaneousOps simultaneous_ops
SiliconRevision silicon_revision
PageMode        page_mode
EraseSuspend    erase_suspend
BurstMode       burst_mode
BlkProtUnprot   blk_prot_unprot
BlkProt         blk_prot
EOF
) | while read a b; do
    sed -i "s/$a/$b/g" src/flash/nor/*cfi*
done
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---

Change-Id: I135331539ca9aa84765fdffc51c87a07a46ee77a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6298
Tested-by: jenkins

stlink: fix SIGSEGV with libusb v1.0.24-33-g32a2206 (11618)

The stlink driver incorrectly uses a NULL pointer for libusb's
struct libusb_context.
The correct value to be used is local in libusb_helper.c.

Move in the helper file, in a wrapper function, the only call that
requires the above value, and let stlink driver to use this
wrapper.

This issue has not triggered any visible problem until a code
refactoring [1] in libusb has made OpenOCD crashing on Windows and
on MacOS.

Change-Id: Id1818c8af7cf0d4d17dfa1d22aad079da01ef740
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Fixes: https://sourceforge.net/p/openocd/tickets/308/
Fixes: https://github.com/libusb/libusb/issues/928/
Fixes: 42d8fa899c6a ("stlink_usb: Submit multiple USB URBs at once to improve performance")
Link: [1] https://github.com/libusb/libusb/commit/32a22069428c
Reported-by: Andrzej Sierżęga <asier70@gmail.com>
Co-developed-by: Andrzej Sierżęga <asier70@gmail.com>
Co-developed-by: Xiaofan Chen <xiaofanc@gmail.com>
Reviewed-on: http://openocd.zylin.com/6331
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Xiaofan <xiaofanc@gmail.com>
Reviewed-by: Andrzej Sierżęga <asier70@gmail.com>
Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

flash/nor/stm32l4: Fix stm32l4_probe()

The current implementation fails due to the assert() statements in
get_stm32l4_rev_str() and get_stm32l4_bank_type_str(). Rearrange the
code in order to fix the problem.

Change-Id: If19c648dec8ddd3ef2fb801150114104b34c3bf2
Signed-off-by: Marc Schink <dev@zapb.de>
Fixes: 64c2e03b23 ("flash/nor: improved API of flash_driver.info & fixed buffer overruns")
Reviewed-on: http://openocd.zylin.com/6326
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/breakpoints: Remove dead code and cleanup

Change-Id: I8027178b6e771753775514a8641a050c6e63a1d5
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6321
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

armv7m: replace flag 'stlink' with 'is_hla_target'

The HLA target is not anymore used by ST-Link only, but required
by Nu-Link and TI-ICDI too.

Rename the flag 'stlink' as 'is_hla_target'.

Change-Id: Id2ee2c0a1e8bf1f1e899f7a560140c34eefeeee5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6206
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>

target/dsp563xx: Use bool data type for 'hardware_breakpoints_cleared'

Change-Id: Ic18973d3e90d74c211b48627bdaac4cf3357b682
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6324
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/dsp563xx: Handle return values

This fixes 'dead assignment' bugs identified by the clang static analyzer.

Change-Id: I140ed55f0043e06a533f45f50a36887614585b04
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6323
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl/board: Add Renesas Falcon board

Add board configuration for Renesas Falcon board based on the R8A779A0 V3U SoC.

Change-Id: If8369f2e2b97dfea9ccbee2c9b916ef7094f9b92
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/6315
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl/target: Add support for Renesas R8A779A0 V3U SoC

The V3U SoC is unique in that it now has 8x CA76 and CR52,
while the previous SoCs had CA57/CA53/CR7 . This can still
be handled without too complex modifications to the gen3
configuration file, so add the logic to handle it there.

Change-Id: I7ab33eacc1fd379d369988d3d6690d2e82346c7e
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/6314
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl/target: Select default boot core on Renesas R-Car Gen2/Gen3

On SMP Renesas R-Car Gen2/Gen3 systems, select the boot core as
the default target using the 'targets' command. This way, the
user can start debugging code running on the boot core without
having to switch to the boot core by explicitly invoking 'targets'
command first, since it is likely the debugged code will run on
the boot core. Note that most of the code is already in place, it
was just not used, so this is more of a fix to make the original
intention work.

Change-Id: I727808adce617c1d9ebd6ffa34f60f5882cdae60
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Reviewed-on: http://openocd.zylin.com/6313
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/riscv: Implement get_gdb_arch()

Change-Id: I5f4ab5243104df41031950682f688f2448a09b17
Signed-off-by: Jesse Sheridan <jesse.sheridan@gmail.com>
Reviewed-on: http://openocd.zylin.com/6322
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl: Add support for the Digilent Nexys Video board

* https://store.digilentinc.com/nexys-video-artix-7-fpga-trainer-board-for-multimedia-applications/
* https://reference.digilentinc.com/_media/nexys-video:nexys_video_sch.pdf

The Nexys Video board has FTDI FT2232 whose channel B is connected to
Artix-7 FPGA's JTAG pins, and can be supported by OpenOCD's
ftdi interface. Tested to be working fine on real hardware.

Change-Id: I2996166dc8c2b6c08a9390958adfcdec8fc2bd37
Signed-off-by: Rohit Singh <rohit91.2008@gmail.com>
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/4364
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Doc fix: echo writes to the log, and not to stdout

Fixes bug #202

Change-Id: I855a1b8570af71379891634f405b4cc726917cb2
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: http://openocd.zylin.com/6272
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

doc/openocd: Fix typo

Change-Id: I8cf679190d6911de2dee181879c8895b55466835
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6296
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Use boolean argument for register_get_by_name()

Change-Id: Ie913630c6ab3b600532d8e375e2fc11ca202cf5e
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6295
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/register: Minor code cleanup

Change-Id: Ie02a112c0339ae5d3b3763483e493370b487be98
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6294
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

flash/stm32fxx.c: do not read CPUID as this info is stored in cortex_m_common

In these drivers we read CPUID to check the Cortex-M PARTNO,
but now the PARTNO is stored in struct cortex_m_common.core_info.

Change-Id: I5bb3b95210ab6e23b8e1252686dd81015740bf68
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6240
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

cortex_m: enhance core and arch detection

Rework core detection by adding cortex_m_partno enum to detect all CPUs
using the same method.

Instead of checking the core PARTNO then assign the arch, use the stored
information within cortex_m parts[] with the flags inside which can help
simplifying a bit the cortex_m_examine code.

This change fixes:
 - the Cortex-M1 detection as ARMv6-M Core (was managed as ARMv7-M)
 - the displayed CPU name for Cortex-M0+ (was displayed Cortex-M0)

Change-Id: I40b6e03f7cf3664c85e297adfc25323196dfe90b
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6233
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/arm: optimize architecture flags

In target/arm.h the struct arm do contain 3 flags to retain architecture
version for some tweaks.
The proposal is to have only one enumerated flag 'arch' for the same purpose.

Change-Id: Ia5d5accfed8158ca21eb54af2fdea8e36f0266ae
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6229
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

contrib/itmdump.c: fix implicit declaration warning

atoi used but stdlib.h wasn't included.
Also, include statements reordered alphabetically.

Change-Id: I7fcdbf3fa940a172204ec811399e1a7fdebdc979
Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com>
Reviewed-on: http://openocd.zylin.com/6312
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target: Rename 'linked_BRP' to 'linked_brp'

Change-Id: I9dd67ac3e8cd5dd9cdeffce56020b387a8f298fa
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6316
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

armv4_5: do not read/write non-existent registers

Change-Id: I4a0c401a325e57ba5d4d93d83b7e6b71a4d0865e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6064
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

arm_dpm: do not read/write non-existent registers

Change-Id: I6a991899bb178ee0c6b41870a45d0a9439d9dc1e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6063
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

armv8_dpm: do not read/write non-existent registers

Change-Id: I0f3fffa8cf1746569f6acce0233e9544d3862f51
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6062
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

flash/nor: improved API of flash_driver.info & fixed buffer overruns

1) The API of "info" callback in "struct flash_driver" has been
improved. Fixed buffers for strings

2) Removed the calls to snprintf() from the flash_driver.info
implementations. Many of them were used in an unsafe manner
(buffer overruns were possible).

Change-Id: I42ab8a8018d01f9af43c5ba49f650c3cb5d31dcb
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: http://openocd.zylin.com/6182
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

Add remote bitbang write buffer.

Change 7dd323b26 reduced remote bitbang performance a lot. This change
gets most of that performance back again, by reintroducing a write
buffer.

Performance numbers collected using DebugBreakpoint test from
riscv-tests/debug against a single 64-bit spike (RISC-V simulator)
instance. (Ubuntu 20.04.2, AMD Ryzen 5 3600)
Before Windows support was added: 3.09s
After Windows support was added: 12.67s
After this change: 4.69s

Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: I72ff4912cbbf316a30ef065e5b8f461a555f06cc
Reviewed-on: http://openocd.zylin.com/6283
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/cortex_a: Use bool data type

Change-Id: Ieea3dc05809263aa0eba5125d52fef3fe77e9c5a
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6289
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/startup.tcl: Do not use 'Yoda conditions'

Change-Id: I5e1bbaf032659dda1b365ef4ec6ea4a635d921ce
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6284
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Avoid non-standard conditionals with omitted operands.

Fixes bug #257.

Change-Id: I05fc6468306d46399e769098e031e7e588798afc
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: http://openocd.zylin.com/6271
Tested-by: jenkins
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Add target_data_bits().

This is used to compute memory block read alignment, and specifically
allows 64-bit targets to ensure that memory block reads are only
requested on 64-bit boundaries.

Signed-off-by: Tim Newsome <tim@sifive.com>
Change-Id: Idb1a27b9fc02c46245556bb0f3d6d94b368c4817
Reviewed-on: http://openocd.zylin.com/6249
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins
Reviewed-by: Jan Matyas <matyas@codasip.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

cmsis_dap: add support for swo commands

Replaced mixed snake_case_CamelCase with snake_case.
Define variables at first-use location.

CMSIS-DAP SWO specification:

    https://arm-software.github.io/CMSIS_5/DAP/html/group__DAP__swo__gr.html

Change-Id: Ieba79b16efd445143f964b614673d041aae74f92
Signed-off-by: Adrian Negreanu <adrian.negreanu@nxp.com>
Reviewed-on: http://openocd.zylin.com/5820
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target: Use 'bool' for 'reset_halt'

Change-Id: I974a6360ea7467067511541ac212f2e9d3de7895
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6262
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

drivers/jlink: Remove trailing dots

This makes the messages consistent with most of the rest of
the OpenOCD output.

Change-Id: I915a01187e7fc317e02483ac0bbd39ec077d6321
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6274
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/renesas_rz_g2: Introduce tcl config file for RZ/G2 devices

Initial support for Renesas RZ/G2 MPU family

Change-Id: I5ca74cddfd0c105a5307de56c3ade7084f9c28d2
Signed-off-by: micbis <michele.bisogno.ct@renesas.com>
Reviewed-on: http://openocd.zylin.com/6250
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

gdb_server: Log both incoming and outgoing GDB packets

- Made sure that also outgoing GDB packets are logged,
  not only the incoming ones.

- Improved the treatment of non-printable characters
  in the packets to make it more robust.

Prior to this change:

- Outgoing packets were not printed unless OpenOCD was
  re-compiled with _DEBUG_GDB_IO_.
- Non-prinable characters were only treated in incoming
  'X' packets.

After this change:

- Both incoming and outgoing GDB packets are logged
  on debug_level >= 3, so that both directions of the
  GDB channel are visible.
- Non-printable characters are checked for in every packet
  so that hey do not interfere with the terminal.

Change-Id: I0613e57ae5059b3279b0abcb71276cf5719a8699
Signed-off-by: Jan Matyas <matyas@codasip.com>
Reviewed-on: http://openocd.zylin.com/6269
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Makefile: add special target .DELETE_ON_ERROR

The special .DELETE_ON_ERROR deletes the target file on recipe error.
Otherwise, an incomplete output file may be considered up to date
the next time around. .DELETE_ON_ERROR provides reasonable
protection at virtually no cost.

Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Change-Id: I67dca47ae5ddf3786993c87b9991b3046a85f00b
Reviewed-on: http://openocd.zylin.com/6235
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

tcl/target/stm32f4x: fix hardcoded chip name

Fixes: c945d6e61605 ("tcl/target: start using the new TPIU/SWO support")
Change-Id: I4543c9a204f7b4b3b14e6eabc5042653106aff0e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/6277
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins

helper/list.h: add mention to the example in contrib

Without such reference, it could be difficult to find the example.

Change-Id: Ia9ffb06bc1a45446c2c7b53197ab3400e1d8a9e9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6281
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>

contrib: add an example of using list.h

Change-Id: Ic3d399d7ad2e4d10677cf78d64968040941b74e5
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6280
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>

helper/list.h: align file to Linux v5.12

Main improvement is in the doxygen comments.
Minimize the delta with kernel file.
Skip the functions hlist_unhashed_lockless() and
__list_del_clearprev() that are relevant only in kernel.
Remove gcc extension "omitted conditional operand".

Change-Id: I2e9ddb54cfe2fa5f7cf18f44726acd144e1f98b9
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6276
Reviewed-by: <rdiezmail-openocd@yahoo.de>
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

server/telnet: fix autocomplete for jimtcl commands

Current autocomplete filters-out some command reported by "info
commands". One of the filter rule concerns the command's private
data.
Every command registered by OpenOCD has its 'struct command' as
private data.

By ignoring commands without private data, we loose several TCL
commands registered by jimtcl, e.g. 'foreach', 'llength'.

By assuming that every command with non-NULL private data has
'struct command' as private data, we risk at best to access
inconsistent data, at worst to trigger a segmentation fault.

Export the already available functions:
- to check if a command has been registered by OpenOCD and
- to get the private data.
While there, rename jimcmd_is_ocd_command() as
jimcmd_is_oocd_command().
Don't filter-out jimtcl commands with no private data.
Check the private data only on OpenOCD commands.

Change-Id: Ib5bf8d2bc5c12440c0cfae438f637c38724a79b7
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6282
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>

helper/jim-nvp: comply with coding style [2/2]

With the API fixed to comply with OpenOCD coding style, fix all
the references in the code.

Patch generated automatically with the script below.
The list is in reverse order to replace a common prefix after the
replacement of the symbols with the same prefix.

%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---
(cat << EOF
Jim_SetResult_NvpUnknown         jim_set_result_nvp_unknown
Jim_Nvp_value2name_simple        jim_nvp_value2name_simple
Jim_Nvp_value2name_obj           jim_nvp_value2name_obj
Jim_Nvp_value2name               jim_nvp_value2name
Jim_Nvp_name2value_simple        jim_nvp_name2value_simple
Jim_Nvp_name2value_obj_nocase    jim_nvp_name2value_obj_nocase
Jim_Nvp_name2value_obj           jim_nvp_name2value_obj
Jim_Nvp_name2value_nocase_simple jim_nvp_name2value_nocase_simple
Jim_Nvp_name2value_nocase        jim_nvp_name2value_nocase
Jim_Nvp_name2value               jim_nvp_name2value
Jim_Nvp                        struct jim_nvp
Jim_GetOpt_Wide                  jim_getopt_wide
Jim_GetOpt_String                jim_getopt_string
Jim_GetOpt_Setup                 jim_getopt_setup
Jim_GetOpt_Obj                   jim_getopt_obj
Jim_GetOpt_NvpUnknown            jim_getopt_nvp_unknown
Jim_GetOpt_Nvp                   jim_getopt_nvp
Jim_GetOpt_Enum                  jim_getopt_enum
Jim_GetOpt_Double                jim_getopt_double
Jim_GetOpt_Debug                 jim_getopt_debug
Jim_GetOptInfo                 struct jim_getopt_info
Jim_GetNvp                       jim_get_nvp
Jim_Debug_ArgvString             jim_debug_argv_string
EOF
) | while read a b; do
    sed -i "s/$a/$b/g" $(find src -type f ! -name jim-nvp.\? )
done
%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---%<---

Change-Id: I10a12bd64bb8b17575fd9150482c989c92b298a2
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6184
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins

helper/jim-nvp: comply with coding style [1/2]

The helper jim-nvp does not comply with OpenOCD coding style due
to typedef of struct and CamelCase symbol names.
While it's trivial fixing the helper and all its current use in
the code, changing these APIs will potentially break a number of
patches pending in gerrit. Gerrit will not trigger any alert, but
the code will generate compile error after the merge.

Add the compile flag "-Wno-error=deprecated-declarations" to keep
as warning (not as error) the use of "deprecated" functions and
types.
Rename all the CamelCase symbols is lowercase and provide struct
prototypes in place of the typedef.
Add a DEPRECATED section to 'jim-nvp.h' where the old CamelCase
symbols and the old typedef are re-declared with compile attribute
'deprecated'.

With this change OpenOCD compiles, but generates warnings.
The remaining changes allover OpenOCD code will be fixed in a
separate patch for easier review.

The patches merged later that still use the old deprecated API
will compile with warnings. This will permit to identify and fix
these cases.

Change-Id: I786385d0f662dbb1be5be313ae42623156d68ce5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6183
Tested-by: jenkins
Reviewed-by: Marc Schink <dev@zapb.de>

target/cortex_a: fix memory leak on watchpoints

The memory allocated to hold the watchpoints is not freed at
OpenOCD exit.

Free the watchpoint memory at OpenOCD exit.

Change-Id: I518c9ce0dc901cde2913d752e3154734f878b854
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6210
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

target/cortex_a: add support for watchpoint length of 1, 2 and 4 bytes

Use byte address select for 1 and 2 bytes length.
Use normal mode for 4 bytes length.

Change-Id: I28d182f25145d0635de64d0361d456f1ad96640e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6197
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

target/cortex_a: fix number of watchpoints

Decrement the available watchpoints only when succeed setting it.
Initialize the available watchpoint with the correct value.

Change-Id: I0f93b347300b8ebedbcd9e718d4ba32b26cf6846
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6196
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

target/cortex_a: add support for watchpoints

The current implementation of OpenOCD does not support watchpoints for
cortex_a architecture. So, I replaced the add_watchpoint and
remove_watchpoint with the specific implementation for the
cortex a and using the breakpoint implementation and the arm
documentation [1] as reference. In particular, I have made the
following changes:

* added the following functions

- cortex_a_add_watchpoint
  This wrapper function check whether there are any watchpoint
  available on the target device by calling cortex_a_set_watchpoint.

- cortex_a_set_watchpoint
  This function is responsible for settings the watchpoint register
  pair. In particular, it sets the WVR and the WCR registers with
  the cortex_a_dap command.

- cortex_a_remove_watchpoint
  This wrapper function the selected watchpoint on the target device
  by calling cortex_a_unset_watchpoint.

- cortex_a_unset_watchpoint
  This function sets both the WVR and the WCR registers to zero, thus
  unsetting the watchpoint.

[1]
http://infocenter.arm.com/help/topic/com.arm.doc.ddi0464f/BCGDHIEJ.html

Change-Id: I86611dab474cb84836662af572b17636dc68e282
Signed-off-by: Chengyu Zheng <chengyu.zheng@polimi.it>
Reviewed-on: http://openocd.zylin.com/3913
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Marc Schink <dev@zapb.de>
Tested-by: jenkins

target/arm_adi_v5: Fix clear sticky overrun flag during replay of commands

When a WAIT occurs the commands after the WAIT are replayed and the
STICKYORUN is cleared. However if another WAIT occurs during the
command replay, the command itself is resent but the STICKYORUN bit
shall also be cleared. If this is not done, the MEM-AP hangs.

Change-Id: I14e8340cd5d8f58f4de31509da96cfa2ecb630d1
Signed-off-by: micbis <michele.bisogno.ct@renesas.com>
Reviewed-on: http://openocd.zylin.com/6278
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

tcl/board: Add ST NUCLEO-8S208RB

Change-Id: I384c6ad9b4cbabbc004160677f600d8c4bd3eb71
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6268
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

stlink: reorder the flag macro by firmware release

The corresponding bit for each macro is changed, but this is not
relevant in the code.

Change-Id: I7039464f5a3d55d008208f44952aadeb815bd5a3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6212
Tested-by: jenkins

stlink: add comment of firmware version for each flag bit

Change-Id: I7f7c7b9c9cfd88125f82662ed864a2c0715140b1
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6211
Tested-by: jenkins

LICENSES: Add the MIT license

Add the full text of the MIT license to the kernel tree.  It was copied
directly from:

  https://spdx.org/licenses/MIT.html#licenseText

Add the required tags for reference and tooling.

Change-Id: I94a5dea5ced6421809ea2a3448f8dda19a93f5c9
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6219
Tested-by: jenkins

help: fix line size in 'usage' output

The implementation of command 'usage' is broken while checking the
line limit of 76 chars per line (e.g. 'usage load_image') and the
line wrapping is not correct. The same broken code is used for the
first output line of command 'help' too.

When call command_help_show_wrap(), include the command's name in
the string so the whole text would be wrapped.

Change-Id: Idece01ce54994db7e851d8522435ff764b11f3ac
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6223
Tested-by: jenkins

help text: remove trailing space

Some help text end with a useless space character.
Remove it.

Change-Id: I397e1194fac8042f0fab694222f925f906716de3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6222
Tested-by: jenkins

tcl: remove remaining deprecated commands

There are still few adapter_khz, ftdi_location, jtag_nsrst_delay
and xds110_serial strolling around ...

Change-Id: I3e8503dcc3875e3c92e6536f3d455a5e448d51ff
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6270
Tested-by: jenkins

rtos: use ARRAY_SIZE() and simplify rtos_type.create()

Use the existing macro ARRAY_SIZE().
Rewrite the functions rtos_type.create() to simplify the logic.

Change-Id: I8833354767045d1642801d26944c9087a77add00
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6261
Tested-by: jenkins

openocd: use macro ARRAY_SIZE()

There are still few cases where the macro ARRAY_SIZE() should be
used in place of custom code.

Use ARRAY_SIZE() whenever possible.

Change-Id: Iba0127a02357bc704fe639e08562a4f9aa7011df
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6260
Reviewed-by: Xiang W <wxjstz@126.com>
Tested-by: jenkins

drivers/versaloon: use ARRAY_SIZE()

Replace the custom macro dimof() with the OpenOCD macro
ARRAY_SIZE().

Change-Id: I2fe638444f6c16f2a78c1fd558b21550f76282d6
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6259
Tested-by: jenkins
Reviewed-by: Xiang W <wxjstz@126.com>

target/zynqmp : Add AXI AP access port

The Xilinx Zynq UltraScale+ SoC have an "AXI-AP" access port for direct memory accesses without halting CPUs.

Change-Id: I6303331c217795657575de4759444938e775dee1
Signed-off-by: Olivier DANET <odanet@caramail.com>
Reviewed-on: http://openocd.zylin.com/6263
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

riscv: replace macro DIM() with ARRAY_SIZE()

OpenOCD already defines the macro ARRAY_SIZE, while riscv code
uses a local macro DIM.

Prefer using the macro ARRAY_SIZE() instead of DIM().
Not all the riscv code has been upstreamed, yes; this patch only
covers the code already upstreamed.

Change-Id: I89a58a6d91916d85c53ba5e4091b558271f8d618
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6258
Reviewed-by: Xiang W <wxjstz@126.com>
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>

riscv: drop unused variable

The array newly_halted[] is assigned but its value is never used.
Drop it!

Change-Id: I678812a31c45a3ec03716e3eee6a30b8e8947926
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6257
Tested-by: jenkins
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Tim Newsome <tim@sifive.com>

mem_ap: fix target arch_info type

The target mem_ap appears as an ARM target, thus it allows the
execution of ARM specific commands causing the crash of OpenOCD.
E.g. 'arm mrc ...' can be executed and segfaults.

Replace the incorrect ARM magic number with a dedicated one.
While there, remove the 'struct arm', that is now holding only the
mem_ap's dap, and replace it with a pointer to the dap.

Change-Id: I881332d3fdf8d8f8271b8711607737b052a5699b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6213
Tested-by: jenkins

helper/command: silent debug msg on command register/unregister

Commit e216186fab59 ("helper/command: register full-name commands
in jim") and commit a7d68878e4ba ("helper/command: unregister
commands through their full-name") introduce a LOG_DEBUG() message
each for command registration and unregistration.
The messages above are quite noisy and pollute the log when
debug_level is 3 or higher.
They can be useful to debug the command registration logic, but
for the other debug activities on OpenOCD are just noisy.
Already commit a03ac1ba3087 ("helper/command: disable logging of
registered commands [RFC]") was merged to silent the first case
that is now back with additional logs.

Silent both log messages.
Use 'if (false)' to silent them, making easy to re-enable it when
or if someone needs it.

Change-Id: Id8a067e60e822d4ecbddcb036d081298f7e6181f
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6220
Tested-by: jenkins

configure.ac: use a separate folder for Autoconf-generated files

Autoconf generates several files in root folder of the project.
Keep the root folder cleaner by specifying subfolder 'build-aux'.
Align .gitignore accordingly.

Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Change-Id: Ied87faba495d9eeb8f98e78c2e2b7e7e596febfb
Reviewed-on: http://openocd.zylin.com/6236
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Remove compatibility macros m4_ifblank and m4_ifnblank

They are at least since Autoconf 2.67 present,
and we are requiring version 2.69.

Change-Id: I41b33d4ebe02198f03cdddcc4a3c1beedd993d78
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: http://openocd.zylin.com/6239
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Warn on undefined preprocessor symbols

Preprocessor directives like "#if SYMBOL" silently replace undefined or
misspelt symbols with 0, which makes configuration bugs hard to spot.
Compiler flag "-Wundef" prevents such errors.

Change-Id: I91b7ba2db02ef0c3c452d334601c53aebda4660e
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: http://openocd.zylin.com/6238
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Document the buspirate interface driver.

Change-Id: Iaff13fc5187041a840f4f00eb6b4ee52880cf47e
Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de>
Reviewed-on: http://openocd.zylin.com/6231
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

openocd: fix some minor typo

Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.

Change-Id: I7b4cae1798ff5ea048fcbc671a397af763fdc605
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6218
Tested-by: jenkins

target: fix some minor typo

Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.

Change-Id: I548581247db72e683249749d1b8725035530b06e
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6217
Tested-by: jenkins

jtag: fix some minor typo

Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.

Change-Id: I101c76a638805d77c1ff356cf0f027552389e5d3
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6216
Tested-by: jenkins

flash: fix some minor typo

Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.

Change-Id: Ia5f134c91beb483fd865df9e4877e0ec3e789478
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6215
Tested-by: jenkins

tcl: fix some minor typo

Minor typos found by the new checkpatch boosted by the dictionary
provided by 'codespell'.
While there, fix one indentation.

Change-Id: I72369ed26f363bacd760b40b8c83dd95e89d28a4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6214
Tested-by: jenkins

tcl/rp2040: remove empty line at end of file

Change-Id: I212a96b77282b151a8ecbd46a6436e2bbbda4161
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6221
Tested-by: jenkins

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)