target/cortex_a: Use 'bool' data type

Change-Id: I055767f1c20af539159ee59e35de8dd20b399fa4
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4963
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/avr32_ap7k: Use 'bool' data type

Change-Id: I49f1a6c6ee6d175935eb40b49abf8ebdf56a0b6e
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4961
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/arm926ejs: Use 'bool' data type

Change-Id: I3016a8ba37942d674017c09e4540d9813c832872
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4960
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/arm920t: Use 'bool' data type

Change-Id: I5f2c95d9a4bdb14cc31d72eb026f58710fb07db5
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4959
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/arm720t: Use 'bool' data type

Change-Id: I9838d0d0ba472f029169ab37597ef367a6084fbf
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4958
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/aarch64: Use 'bool' data type

Change-Id: Ibfe4413b88ed0759a556a8777dac40f0c2c64922
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4957
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/armv8: Use 'bool' data type

Change-Id: I65def33f24187ab336db5732ce35200ca5cd8f5f
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4956
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/armv7m: Use 'bool' data type

Change-Id: I9cfbba9d81601cc72e2b54ec410e21c7edc4f1c4
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4955
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/arm11: Use 'bool' data type

Change-Id: Ia09adeab88eaf66c009f94be25ab82b0b8f88f61
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4954
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/armv7_9_common: Use 'bool' data type

Change-Id: I5af27247f39cf47c925260784e21292f34665471
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4953
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/armv4_5: Use 'bool' data type

Change-Id: I82e3963ea662844bb96943aee849dab35ea96bb3
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4952
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/register: Use 'bool' data type

Change-Id: I3633ced9cb2bfe6afb0ef49aa42fd1b54f155a66
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4951
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/cortex_m: Use 'bool' instead of 'int'

Change-Id: I273d24997e2c844015e144a15981f8f0af522261
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4950
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target: Remove unused variable 'has_percent'

Change-Id: Ib080fc33e8a0305990ee334019547e7643c446ac
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4949
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

helper/command: return proper JIM error code

The function command_unknown() is expected to return a value
recognized as JIM error code, as it is correctly done in the
other cases it returns.

Fix the only case in which command_unknown() does not return
a JIM error code, by s/ERROR_FAIL/JIM_ERR/

Change-Id: Ib98b75755ae36870bd68c17f8839ddbfa06c6312
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4973
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

stlink: remove unused assignment

Fix a warning identified by clang 7.0.1:
stlink_usb.c:1092:3: warning: Value stored to 'p' is never read
p += sprintf(p, "S%d", swim);
^    ~~~~~~~~~~~~~~~~~~~~~~~

Change-Id: Ic9da57e19ceecb0e3d65d3ea3412a05e1c2c779a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4945
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

gdb_server: fix 'null' pointer passed as 'nonnull' parameter

The null pointer used as second parameter to gdb_put_packet() is
passed as second parameter to the memcpy() in line 408 of
gdb_put_packet_inner(). In this case memcpy() does not segfault
because also the parameter length is zero. Nevertheless, the
prototype of memcpy() requires a nonnull pointer.

Fixed by passing an empty string in place of the null pointer.

Issue highlighted by clang 7.0.0 with warning message:
"Null pointer passed as an argument to a 'nonnull' parameter"

Change-Id: Ib3dde95d76fcc5fb245ee2d6669e5535d0e0b127
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4946
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

src/jtag/drivers/ftdi: fix swd pin comment and links

- TDI/DO is not pin 2 and in fact, we don't even need to mention which
pin number it is. "TDI/DO pin" is descriptive enough.

- FT2232D link didn't work anymore. It could have been updated to the
current working FT2232D link but changed to link the FT2232H instead
which is the latest generation and the most commonly used these days.

- Taking advantage of the change, link to the MPSSE document updated.
It still worked but through a redirection, so updated just in case the
redirection stops working.

Change-Id: Ia7d01bbcac2158026831edb010a6b50f58351e42
Signed-off-by: Diego Herranz <diegoherranz@diegoherranz.com>
Reviewed-on: http://openocd.zylin.com/4908
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

gdb_server: remove warning for stepi after gdb_sync

The command "gdb_sync" is used to resynchronize gdb with OpenOCD.
It is supposed to be follow by the gdb command "stepi" that will
be ignored by OpenOCD.

Don't annoy the user with a warning message when the stepi
command is ignored, but simply log a debug message.

Change-Id: Ie4cffa89e761d7335e5961900b62e31f209d4b1b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4764
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

armv8: allow halt on exception

add command 'catch_exc' to halt a core on entering any of Secure EL1 or
EL3 or Non-Secure EL1 or EL2.

Change-Id: I0c68e247af68dd96616855a9bc1063c277d222e5
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/4479
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

Use enum for target_register_timer_callback()

Change-Id: I268e8c5d783914aa97cbde301448b2c5bc3cb9e6
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4921
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

target: Use proper data types for timer callback

Change-Id: I5ca6da767f9e96180c43b179b2c682b1b7c98563
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4920
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash: stm32f2/f4/f7: Add One-Time-Porgrammable (OTP) support

The OTP is part of the flash memory. It has 512 (1024 for F7) bytes
and is organized in 16 sectors with 32 (64 for F7) bytes each.
The OTP is exposed as separate flash bank 1 and can be used
with the usual flash commands.

Writing the OTP can be done as follows:

> stm32f2x otp 1 enable
> flash write bank 1 foo.bin 0
> mdw 0x1fff7800 4
> verify_image foo.bin 0x1fff7800
> stm32f2x otp 1 disable

Note: This patch is largely a rebase/cleanup of a patch
from 2012 by Laurent Charpentier and he did most of the work.

No new Clang-Analyzer warnings.

Change-Id: I5e6371f6a7c7a9929c1d7907d6ba4724f9d20d97
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-on: http://openocd.zylin.com/829
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

jtag: drivers: cmsis-dap: correct vendor request code

While at it, change the macro name to make it obvious it's a string,
not some numeric ID. This also matches ARM code that's using

Change-Id: Id35ba5b95cef0ac77657c40985b24c1ae2720748
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Reviewed-on: http://openocd.zylin.com/3855
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

aarch64: fix a potential memory leak in aarch64_target_create()

If the function aarch64_target_create() exits for an error, the
value of pointer aarch64 get lost, causing a memory leak.

Move the allocation of aarch64 after the check on the parameters.
While there, add a check on the value returned by calloc().

Issue highlighted by clang 7.0.0.

Change-Id: Ib9ad27f4acd940da308c01fdbf33cfe51ab0c639
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4924
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

mem_ap: fix a potential memory leak in mem_ap_target_create()

If the function mem_ap_target_create() exits for an error, the
value of pointer mem_ap get lost, causing a memory leak.

Move the allocation of mem_ap after the check on the parameters.
While there, add a check on the value returned by calloc().

Issue highlighted by clang 7.0.0.

Change-Id: Ia2c11b14fde9694f28bf6efe01d278923db0f0d4
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4923
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

cortex_a: fix a potential memory leak in cortex_a_target_create()

If the function cortex_a_target_create() or the function
cortex_r4_target_create() exit for an error, the value of pointer
cortex_a get lost, causing a memory leak.

Move the allocation of cortex_a after the check on the parameters.
While there, add checks on the value returned by calloc().

Issue highlighted by clang 7.0.0.

Change-Id: Ic6eeb9c3b39922d016f6d0319eada1a97a6681f0
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4925
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

server: fix small mem leak of bindto_name

Change-Id: Ib9c8003e164a156f1c4d3cde47e4158d867d82c6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4909
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

Fix support for single-bank stm32l4 processors

Recent patches for STM32L4+ assumed all STM32L4 processors have a dual-
bank option. This is not the case for STM32L4{3,4,5,6}xx processors and
therefore, these processors (like STM32L433) failed when attempting to
flash the second half of the flash memory. This patch fixed this issue.
Tested on STM32L433xC, STM32L476xG and STM32L471xG.

Change-Id: I8262ba4f05190802c5868d753f3e7af50e581811
Signed-off-by: Armin van der Togt <armin@otheruse.nl>
Reviewed-on: http://openocd.zylin.com/4913
Tested-by: jenkins
Reviewed-by: Peter Tettelaar <peter@float-iot.nl>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Mark Schulte <mschulte@lyft.com>

ftdi: use "adapter usb location" instead of ftdi_location command

Use unified "adapter usb location" instead of driver specific
command.

Change-Id: I568a76b87d09cea0f40f1580cf81f7c51402f6f1
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4771
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

target, breakpoints: improve error handling

handle_bp_command_set() showed the error message
"Failure setting breakpoint, the same address(IVA) is already used"
on any error returned from (xxx_)breakpoint_add().
Paradoxically breakpoint_add() returned ERROR_OK if it detected
duplicated bp address.
context_breakpoint_add() and hybrid_breakpoint_add() returned -1
instead of OpenOCD compatible error if they detected duplicity.

Introduce ERROR_TARGET_DUPLICATE_BREAKPOINT
Unify error handling to LOG_ERROR() any error in (xxx_)breakpoint_add()
Remove misleading error messages from handle_bp_command_set()
handle_bp_command_set() returns error if the target does not implement
add_context_breakpoint or add_hybrid_breakpoint.

Change-Id: If17dfad1756d82a77028ebdc4b305f9c8e1365ba
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4871
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

doc: fix typo in "adapter usb location" command

Change-Id: If959c5461904cdf4bcdf1887a9afaa9c2c94282b
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4907
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

doc/openocd.texi: fix xref warning

Xref without trailing '.' or ',' was introduced in
deaf3d264123391d8fe5c4cccbf8fb8852e1be23

Change-Id: I99afd40e1ffeddd1298b7b07e4deba3dcc41799f
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4905
Tested-by: jenkins

target/riscv-011: Fix memory leak in handle_halt_routine()

Tested with SiFive HiFive1 development board.

Change-Id: Ie0d9fa0899804d17ccdd84b03ba4028e97b632b8
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4884
Tested-by: jenkins
Reviewed-by: Tim Newsome <tim@sifive.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

jlink: Use correct SWD buffer size

Currently, the SWD buffer size is adjusted corresponding to the free
device memory. However, the adjusted size is not used.

This fixes SWD operations on devices with small device memory, such as
EFM32PG12 Pearl Gecko STK. It should also fix #184.

Change-Id: I2ec5cf25c62f18bd9e99a2f4aa1aa8d85ed0821b
Signed-off-by: Marc Schink <openocd-dev@marcschink.de>
Reviewed-on: http://openocd.zylin.com/4878
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Tested-by: jenkins

drivers/bitbang: remove unused extern declaration of jtag_interface

After commit a6c4eb03455f ("swd: Remove DAP from parameter list")
the global variable jtag_interface is not referenced in the driver.

Remove the extern declaration.

Change-Id: I72018a59c9cecaa52d9a49ec0d7816ac0e656314
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4874
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

command: fix the mode for command "jtag configure"

Before commit 877cec20dca6e78f9f029f0f173879cda101a6c2 ("command:
check command mode for native jim commands") all the jim commands
were erroneously treated as they had mode COMMAND_ANY.
The commit above fixes the code in order to check the mode and
permit running the commands only if the mode is respected.

Those jim commands that have incorrect mode were not detected nor
fixes because the wrong mode was masked by the missing mode check.
After the commit above, the wrong mode triggers error in several
existing configuration scripts.
A complete list of commands that now does not run anymore as
CONFIG_ANY is reported in ticket 225, but most of them have the
mode set correctly.
At least two instances of command "jtag configure" have the wrong
mode.

Fix the mode to CONFIG_ANY for command "jtag configure" in files
src/jtag/aice/aice_transport.c and src/jtag/tcl.c

Change-Id: I3f96c5fd24d7d463712cbaf1295284fe0dc56b23
Ticket: https://sourceforge.net/p/openocd/tickets/225/
Reported-by: Bill Paul <wpaul@users.sourceforge.net>
Fixes: 877cec20dca6 ("command: check command mode for native jim commands")
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4886
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins

doc: add documentation for "adapter usb location" command

Change-Id: Ia3fbe0c3894b1b96464bbfda5d4101123827b761
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4769
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

target/cortex_m: fix clang static analyzer warning

Fix "Potential leak of memory pointed to by 'cortex_m'"
and test for NULL return from calloc in cortex_m_target_create()

Change-Id: I4d2bb5bccc57f0ed60696f3d588297a858b8ea60
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4881
Tested-by: jenkins
Reviewed-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/hla_target: fix clang static analyzer warning

Added an error msg in case of no memory

Change-Id: I7a7d266ca4aa1e4a0ff02a2d1cc672a3cd2746c3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4882
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

at91samd: Add flash programming support for SAMC2?N* parts

Added id, name, flash size and RAM size for following parts to samc20_parts[]:
SAMC20N18A
SAMC20N17A
And the following to samc21_parts[]:
SAMC21N18A
SAMC21N17A

Change-Id: Ie8cf1c531a60bfaed6e814d436d232afb89dae3f
Signed-off-by: Kevin Vermilion <kevin.vermilion@gmail.com>
Reviewed-on: http://openocd.zylin.com/4880
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

target start_algorithm: Don't copy the IN mem_params fix uninitialised value.

Fix the write only out params TODO on armv7m.c
Fix conditional move depends on uninitialised value.
It was detected while programming a LPC8Nxx with a FTDI adapter.
valgrind --leak-check=full --show-leak-kinds=all --track-origins=yes
[...]
==8696== Conditional jump or move depends on uninitialised value(s)
==8696==    at 0x16E4D3: buf_set_u32 (binarybuffer.h:52)
==8696==    by 0x16E4D3: ftdi_swd_queue_cmd (ftdi.c:1206)
==8696==    by 0x18D76D: swd_queue_ap_write (adi_v5_swd.c:271)
==8696==    by 0x18E33B: dap_queue_ap_write (arm_adi_v5.h:382)
==8696==    by 0x18E33B: mem_ap_write (arm_adi_v5.c:420)
==8696==    by 0x197CD9: target_write_buffer_default (target.c:2176)
==8696==    by 0x2464B3: armv7m_start_algorithm (armv7m.c:383)
==8696==    by 0x246AEB: armv7m_run_algorithm (armv7m.c:330)
==8696==    by 0x19D846: target_run_algorithm (target.c:814)
==8696==    by 0x1DF3A6: lpc2000_iap_call.isra.3 (lpc2000.c:818)
==8696==    by 0x1E0CF6: lpc2000_erase (lpc2000.c:992)
==8696==    by 0x185BDF: flash_driver_erase (core.c:44)
==8696==    by 0x18650D: flash_iterate_address_range_inner (core.c:541)
==8696==    by 0x18650D: flash_iterate_address_range (core.c:567)
==8696==    by 0x18732F: flash_erase_address_range (core.c:584)
==8696==    by 0x18732F: flash_write_unlock (core.c:928)
==8696==  Uninitialised value was created by a heap allocation
==8696==    at 0x4C2BBAF: malloc (vg_replace_malloc.c:299)
==8696==    by 0x220EF9: init_mem_param (algorithm.c:30)
==8696==    by 0x1DF247: lpc2000_iap_call.isra.3 (lpc2000.c:777)
==8696==    by 0x1E0CF6: lpc2000_erase (lpc2000.c:992)
==8696==    by 0x185BDF: flash_driver_erase (core.c:44)
==8696==    by 0x18650D: flash_iterate_address_range_inner (core.c:541)
==8696==    by 0x18650D: flash_iterate_address_range (core.c:567)
==8696==    by 0x18732F: flash_erase_address_range (core.c:584)
==8696==    by 0x18732F: flash_write_unlock (core.c:928)
==8696==    by 0x18ACDF: handle_flash_write_image_command (tcl.c:457)
==8696==    by 0x1B7D99: run_command (command.c:623)
==8696==    by 0x1B7D99: script_command_run (command.c:208)
==8696==    by 0x1B7FD9: command_unknown (command.c:1033)
==8696==    by 0x2E2D37: JimInvokeCommand (jim.c:10364)
==8696==    by 0x2E3865: Jim_EvalObj (jim.c:10814)
==8696==
==8696== Conditional jump or move depends on uninitialised value(s)
==8696==    at 0x16E506: buf_set_u32 (binarybuffer.h:52)
==8696==    by 0x16E506: ftdi_swd_queue_cmd (ftdi.c:1207)
==8696==    by 0x18D76D: swd_queue_ap_write (adi_v5_swd.c:271)
==8696==    by 0x18E33B: dap_queue_ap_write (arm_adi_v5.h:382)
==8696==    by 0x18E33B: mem_ap_write (arm_adi_v5.c:420)
==8696==    by 0x197CD9: target_write_buffer_default (target.c:2176)
==8696==    by 0x2464B3: armv7m_start_algorithm (armv7m.c:383)
==8696==    by 0x246AEB: armv7m_run_algorithm (armv7m.c:330)
==8696==    by 0x19D846: target_run_algorithm (target.c:814)
==8696==    by 0x1DF3A6: lpc2000_iap_call.isra.3 (lpc2000.c:818)
==8696==    by 0x1E0CF6: lpc2000_erase (lpc2000.c:992)
==8696==    by 0x185BDF: flash_driver_erase (core.c:44)
==8696==    by 0x18650D: flash_iterate_address_range_inner (core.c:541)
==8696==    by 0x18650D: flash_iterate_address_range (core.c:567)
==8696==    by 0x18732F: flash_erase_address_range (core.c:584)
==8696==    by 0x18732F: flash_write_unlock (core.c:928)
==8696==  Uninitialised value was created by a heap allocation
==8696==    at 0x4C2BBAF: malloc (vg_replace_malloc.c:299)
==8696==    by 0x220EF9: init_mem_param (algorithm.c:30)
==8696==    by 0x1DF247: lpc2000_iap_call.isra.3 (lpc2000.c:777)
==8696==    by 0x1E0CF6: lpc2000_erase (lpc2000.c:992)
==8696==    by 0x185BDF: flash_driver_erase (core.c:44)
==8696==    by 0x18650D: flash_iterate_address_range_inner (core.c:541)
==8696==    by 0x18650D: flash_iterate_address_range (core.c:567)
==8696==    by 0x18732F: flash_erase_address_range (core.c:584)
==8696==    by 0x18732F: flash_write_unlock (core.c:928)
==8696==    by 0x18ACDF: handle_flash_write_image_command (tcl.c:457)
==8696==    by 0x1B7D99: run_command (command.c:623)
==8696==    by 0x1B7D99: script_command_run (command.c:208)
==8696==    by 0x1B7FD9: command_unknown (command.c:1033)
==8696==    by 0x2E2D37: JimInvokeCommand (jim.c:10364)
==8696==    by 0x2E3865: Jim_EvalObj (jim.c:10814)

Change-Id: I50f9a8c4516b686cf62ac3c76f47c53465e949da
Signed-off-by: Jean-Christian de Rivaz <jcamdr70@gmail.com>
Reviewed-on: http://openocd.zylin.com/4811
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor/stm32f1x: Ability to change user option bytes.

Adds ability to change the user data in STM32F1x/STM32F3x MCU's option byte.
Since OpenOCD prints the content of user data in option byte registers, it
is seems logical to also provide a way how to change this data.

Change-Id: Ie6cb756b4f11b5c6dabd34bc89434a358eb758ff
Signed-off-by: Jan Vojtech <honza.vojtech@gmail.com>
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4663
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>

target algo: do not write reg_param if direction is PARAM_IN

Without this change xxx_start_algorithm() writes all register
parameters no matter of their direction. It usually results
in writing of uninitialized reg_params[].value - possibly
reported by valgrind.

While on it fix the wrong parameter direction in
kinetis_disable_wdog_algo(). This bug did not have any
impact because of unconditional write of reg_params.

Change-Id: Ia9c6a7b37f77d5eb6e5f5463012dddd50471742b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4813
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

drivers/imx_gpio: fix polarity of srst and trst

The comment above the function is correct, but the code set
the GPIO with wrong (reversed) polarity.

Change-Id: Ifd09688150d3d2018af73521e0da3926bb1b7f84
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4847
Tested-by: jenkins
Reviewed-by: Grzegorz Kostka <kostka.grzegorz@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

jtag: drivers: provide initial support for usb path filtering

With this patch drivers will be able to use usb path filtering.
The path format is identical to the format provided by linux kernel:
bus-port.port....
With this format it should be easier just to copy and paste
path found in dmesg.

Change-Id: I8bafa6fcb7a66ff68cc961a376f97f4f3dee35aa
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-on: http://openocd.zylin.com/4580
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

flash/nor: flash driver and cfg for SAM E54, E53, E51 and D51

The new Microchip (former Atmel) series powered by Cortex-M4 looks
very similar to older M0+ powered SAM D2x at the first sight.
Unfortunately the new series differs a lot in important details.
NVMCTRL has different register addresses, moved important bits
and even changed binary command set. An universal driver for all SAM D/E
would be very complicated. That's why a new driver was derived.

Tested on Microchip SAM E54 Xplained Pro kit (board cfg included).

Adjusted for the restructured dap support.
Checked by valgrind and clang static analyzer.

Change-Id: I26c67047a552076f4b207b9b89285a53d69b4ca4
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4272
Tested-by: jenkins
Reviewed-by: Andres Vahter <andres.vahter@gmail.com>

flash/nor/stm32f1x: use address instead of offset in stm32x_write_block()

stm32x_write_options() uses stm32x_write_block() at STM32_OB_RDP address.
The change eliminates subtracting bank->base (and later adding it back).

Change-Id: Icdd24afc7178b814be58e6033d4b93fdfb2d2a16
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4859
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Christopher Head <chead@zaber.com>

flash/nor/stm32f1x: fix minor error messages

Change-Id: I1e9e62979c4629c8ba1d5ae89ca7392259969eb6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4858
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>

cortex_m: fix stepping on FPB rev 1

Stepping in the maskisr auto mode sets breakpoint to step over interrupt
service tasks. If the device has FPB rev 1, setting hard breakpoint
is impossible on address over 0x1fffffff.

Use soft type breakpoint for adresses over 0x1fffffff if FPB is rev 1.
This may eventually fail if the code memory is not writeable, but there
is nothing to do in such case.

Change-Id: Ibdeeb506903a35d550b64f82c24c37a668de62b3
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4857
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

flash/nor/at91samd: add samr34j18.

samr34/r35 combine SAML21 and SX1276 (lora transceiver). This one was found on
xplaned pro evaluation kit. Ids for other r34/r35 chips are apparently not yet
documented.

Change-Id: I4054dd56ea53c9bae8d17abd5a3e4e65e1b9c8b1
Signed-off-by: Guillaume Revaillot <g.revaillot@gmail.com>
Reviewed-on: http://openocd.zylin.com/4872
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

arm_adi_v5: rewrite dap_to_jtag and dap_to_swd

The functions dap_to_jtag() and dap_to_swd() have been introduced by
3ef9beb52cd0 ("ADIv5 DAP ops switching to JTAG or SWD modes") in
arm_adi_v5.c by using the JTAG queue only.
Later, in 6f8b8593d63b ("ADIv5 transport support moves to separate
files") the functions has been moved in adi_v5_swd.c and adi_v5_jtag.c
but keeping the dependency from JTAG queue.
The functions does not work if the current transport is not JTAG.

Move back the functions in arm_adi_v5.c, replace the input parameter
"target" with "dap", use the transport to detect if the JTAG queue is
present, in case of SWD transport use the proper method, for other
transports report error.
Reuse the ADI v5 sequences already present in jtag/swd.h.
Also, OpenOCD does not support switching to another transport after
the initial selection, so do not change DAP's ops vector.

Change-Id: Ib681fbaa60cb342f732bc831eb92de25afa4e4db
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4852
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

aarch64: support for aarch32 ARM_MODE_SYS

Treat ARM_MODE_SYS like all other Aarch32 processor modes,
except for the special case of missing SPSR.

Change-Id: I60b21703659b264f552884cdc0f85fd45f7836de
Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
Reviewed-on: http://openocd.zylin.com/4494
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target: do not allow 'target create' after init

A target created after init lacks target_init_one() call
and is not added to gdb targets.

Steps to reproduce:
- start OpenOCD with a dap target
- connect by telnet
 target create ap0.mem mem_ap -dap $_CHIPNAME.dap -ap-num 0
 reset

Segmentation fault is rised because target->check_reset is NULL.

Change-Id: I2a62f3b450e4db3005c7041a22fb8f952e68c3b6
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4842
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

command: check command mode for native jim commands

The command mode was checked only for simple type of commands.
Native commands (handled by jim_handler) was treated as
they had mode COMMAND_ANY

Change-Id: Iab1d8cbb0b8c6f6b9f3cf942600432dec9a703ff
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4841
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/cortex_m: inform if an external reset occurs

Change-Id: I873e73012c44aac7af3b21b633bd096d8e299d07
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4840
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

command: Log the failed command by full name

Commit 44009186cfabe77fb260af221ebd6272d1e78f44 added logging
of failed cmd name but it used c->name only. It might be confusing:

Debug: 244 105 command.c:644 run_command(): Command 'init' failed with error
 code -4
User : 245 106 command.c:711 command_run_line():
Debug: 246 107 command.c:644 run_command(): Command 'init' failed with error
 code -4

The command on line 244 is 'dap init'
Use full name of cmd including parents.

Change-Id: Iff131ce6454ef70b353ce1bc6d0a480b92820545
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4837
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
Reviewed-by: Jean-Christian de Rivaz <jcamdr70@gmail.com>

hla_target: fix adapter_poll() to preserve TARGET_DEBUG_RUNNING state

Without this change TARGET_DEBUG_RUNNING changes to TARGET_RUNNING
after adapter_poll()

Change-Id: I1c965a43527b50fa723d78fb6eae56585a7ede03
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4820
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

command: initialize the command mode for every command

All the commands in OpenOCD have been inspected and have the
command mode initialize, apart for two of them.
This is not critical, because the uninitialized value (0) is
equivalent to the enum COMMAND_EXEC, that is also the correct
value for the two mentioned commands.

To keep the code consistent, initialize the command mode to
COMMAND_EXEC.

Change-Id: Iaf043364cbd1005418d787ed045a3ec653612382
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4861
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

tcl: Support for Analog Devices ADSP-SC58x / ADSP-SC584-EZBRD

The original script was broken by changes to the Cortex-A code.  The
recent introduction of the mem_ap target provided a new mechanism to
allow the script to be fixed.  This also adds an example board script
for the ADSP-SC584-EZBRD.

Change-Id: I36bc1ac6b6c036539f4175f1e65223ba10a35355
Signed-off-by: Peter Lawrence <majbthrd@gmail.com>
Reviewed-on: http://openocd.zylin.com/4855
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

jtag: cmsis-dap: use macro SWJ_PIN_SRST in place of magic value

While connecting under reset, use the already defined macro
SWJ_PIN_SRST to assert the srst pin.

Change-Id: Icebed462c0fe8f8c15f6522dc56625aa580b8858
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4846
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

rtos: Add RTOS task awareness for Chromium-EC

Add RTOS task awareness for Chromium-EC. Currently
only supports ARM Cortex-M0/M3/M4 based targets.

No new Clang Analyzer warnings.

Change-Id: Iea56fcb1be220e2437613922879b63d6e553703d
Signed-off-by: Moritz Fischer <moritz.fischer@ettus.com>
Reviewed-on: http://openocd.zylin.com/4685
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

Correct ZynqMP configuration to be appropriately named

The xilinx_ultrascale.cfg target is actually the configuration for a
ZynqMP, which is a combination of an UltraScale+ FPGA core and a quad
core A53. Update the filename/comments to reflect this, and include
the tap IDs for all known FPGA cores for this part.

Change-Id: I70dfcc99861a482b83b6a795e83021d9cf1fe047
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-on: http://openocd.zylin.com/4850
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

arm_opcode: fix encoding of ARMv5 breakpoint instruction

The encoding of BKPT instruction is 0xE12###7#, where the four '#'
characters should be replaced by the 16 bits immediate value.
The macro uses an incorrect shift amount, thus the immediate value
is not properly coded and bits 20~23 of the opcode could get
corrupted.

Fixed by using the proper shift amount.

Change-Id: I32db8224ab57aad6d3b002f92f9f259056593675
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4854
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

arm_adi_v5: fix and update sequences to spec IHI 0031E

Fix the SWD line reset sequence accordingly to Arm specification IHI
0031E that requires at least 2 idle clocks after the 50 clocks with
SWDIO high.
Fix the value of the activation code in the (currently unused)
sequence dormant-to-SWD.
Make each sequence's length multiple of 8, so it is compatible with
adapters that have such limitation (e.g. buspirate) and try to split
and comment each part of the sequence (when possible keep each part
byte aligned, inspired from commit 3ef9beb52cd0). This slightly
increases the sequence length but does not impact run-time
performance because these are rarely used sequences.
Add the missing sequence dormant-to-JTAG and JTAG-to-dormant, not
used yet.

On devices that implements the dormant state, IHI 0031E deprecates
the direct switching between SWD and JTAG, and recommends using a
transition through dormant. This is not implemented.

Change-Id: Iad18c0e736cfd9366be175d22658d664b0c61eab
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4851
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

target/arm_dap: fix segmentation fault in 'dap info' cmd

'dap info' command fails hard on a hla target.

Change-Id: Ia188b1afe527e0ed64512d1bddadd507f978e40b
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4860
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

nrf5: add nrf5 device definition for HWID 0x00E3

This hardware id is e.g. used by the Insight SiP ISP1507-AX.

Change-Id: I82568d292f9882372ab061d8e3e36906b0cc5882
Signed-off-by: Mirko Vogt <mirko.vogt@sensorberg.com>
Reviewed-on: http://openocd.zylin.com/4845
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins

cortex_m: fix bug in poll() machine state (external resume awareness)

This patch covers the fact that cortex_m could be resumed externally by
Cross Trigger Interface or by direct write to DHSCR ...

To reproduce:
 - halt the target
 - then run the core through DHCSR (mww 0xe000edf0 0xa05f0001)
 => this resumes the core, but target state in OpenOCD remains HALTED.

Change-Id: Ifa1ae18645bfeb863acc78a039bbf04873fd78fe
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/4817
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

cortex_a_poll: minor code factorization to enhance readability

cortex_a_debug_entry and update_halt_gdb are called in two consecutive
conditions which are complementary, so externalizing the common code
makes the conditions' body lighter

With the removal of LOG_DEBUG(" ") since it does not look too informative

Change-Id: I0c54e413619576bb3af164f2dcf256c5a862c5fd
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/4832
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins

at91samd: added SAM-DA1 parts

Change-Id: I1b206461052ee1897432e379505fdf95372a9e24
Signed-off-by: Severin Junker <s.junker@cartelsol.com>
Reviewed-on: http://openocd.zylin.com/4835
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

helper/command: check for malloc failure in __command_name

If malloc fails in __command_name, the following strcpy will
segfault, thus preventing __command_name to return.
The actual calls to command_name() implement the correct check
for the NULL pointer, but propagate error -ENOMEM, that is not
an error value coherent within OpenOCD. Plus, in one case it
overwrites an already detected error.

Check the pointer returned by malloc and, in case of failure,
issue an error message and return the NULL pointer.
Let the caller of command_name() to keep the already detected
error or to return ERROR_FAIL in case of end of memory.

Change-Id: I151a24569409777dd5bc09a3daf5dba2b8e2829b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4838
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

target/stm8: add missing destroy_reg_param()

Change-Id: Ibd8a423a4400226790cfbb9a6f113b7ea762c436
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4814
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Ake Rehnman <ake.rehnman@gmail.com>

drivers/sysfsgpio: fix usage messages

The notation "(tck tms tdi tdo)* " is incorrect, because it means the
quadruple of gpio can be repeated on the command-line.
The correct syntax of the command requires instead to provide either
all the four gpio numbers (in order to set the values) or to pass an
empty command-line (to dump the values previously set).

Change the .usage field to "[tck tms tdi tdo]".
Change similarly the corresponding .usage field for SWD command.
Add the .usage field for the commands that individually set each gpio.

Change-Id: If5b3c618097b71dfe7fcf988fb3c1499ae03a6d5
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4833
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

Add flash support for SiFive's Freedom E platforms

Valgrind and Clang Static Analyzer have no complaints about this change.

Change-Id: I7757615ec52448372bdc57729cdf97c7016d97e8
Signed-off-by: Tim Newsome <tim@sifive.com>
Reviewed-on: http://openocd.zylin.com/4656
Tested-by: jenkins
Reviewed-by: Philipp Guehring <pg@futureware.at>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

stlink_usb: Submit multiple USB URBs at once to improve performance

Commands to stlink devices are typically comprised of multiple
transactions with each transaction completing before moving to the next.
This change allows for multiple USB transactions to be issued at once
followed by a check that all transactions completed successfully.  This
improves performance on some machines where there is a large turn-around
time between USB transfers such as is seen on some virtual machines.

This change is only supported when compiled with libusb1 as libusb1
supports and asynchronous interface.

Multi-transaction queueing introduced in this change paves the way for
improving speed of other transactions in the future such as memory and
register reads where multiple USB transactions in succession are
required to complete a command.  Multiple USB transactions can be
submitted at once using jtag_libusb_bulk_transfer_n function.

Change-Id: I924e049217a789ef445b14e00aa1983576970fbf
Signed-off-by: Austin Phillips <austin_phillips@hotmail.com>
Reviewed-on: http://openocd.zylin.com/4484
Tested-by: jenkins
Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

libusb: add debug message on adapter not found due to wrong serial

When few adapters of the same type are in use, the serial string is
the way to select the right one.
Currently a serial string that does not match any of the connected
adapters will just fail the open, without specific information to
track the issue.

Add a specific message to highlight that the open failure is caused
by a serial mismatch.

Change-Id: I5cb77f1045cc746e532d395b2e5ced40a23ab638
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4701
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

jtag/drivers/usb_common: return oocd error values

Where possible, keep the same style for returning error.

Change-Id: I3a04220c0b9f129a36e9fe83038b7c19dd57fe61
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4699
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

libusb0: return oocd error values

Commit d1b74376336814266236054f925a9964b87dd8a5 fixes libusb1 to
return OpenOCD error values instead of negative errors in Linux
kernel's style.
The same fix should be applied to libusb0 too.

Fix return value of libusb0 to uniform it to OpenOCD style.

Change-Id: I68478c29c91c6be720074f58c432fe51477e03ed
Fixes: d1b743763368 ("libusb: return oocd error values")
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4698
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target/aarch64: add support for multi-architecture gdb

GDB can be built for multi-architecture through the command
./configure --enable-targets=all && make
Such multi-architecture GDB requires the target's architecture to
be selected either manually by the user through the GDB command
"set architecture" or automatically by the target description sent
by the remote target (i.e. OpenOCD).

Commit e65acd889c61a424c7bd72fdee5d6a3aee1d8504 ("gdb_server: add
support for architecture element") already provides the required
infrastructure to support multi-architecture gdb.

aarch64-linux-gnu-gdb 8.2 uses "aarch64" as default architecture,
but also supports the value "aarch64:ilp32" and all the values
supported by arm-none-eabi-gdb.
These values can be displayed on arm gdb prompt by typing
"set architecture " followed by a TAB for autocompletion.

Set the gdb architecture value for aarch64 target to "aarch64".

Change-Id: I63e9769f47d8e73f048eb84fa73e082dd1c8e52c
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4755
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target/arm: add support for multi-architecture gdb

GDB can be built for multi-architecture through the command
./configure --enable-targets=all && make
Such multi-architecture GDB requires the target's architecture to
be selected either manually by the user through the GDB command
"set architecture" or automatically by the target description sent
by the remote target (i.e. OpenOCD).

Commit e65acd889c61a424c7bd72fdee5d6a3aee1d8504 ("gdb_server: add
support for architecture element") already provides the required
infrastructure to support multi-architecture gdb.

arm-none-eabi-gdb 8.2 uses "arm" as default architecture, but also
supports the following values: "arm_any", "armv2", "armv2a",
"armv3", "armv3m", "armv4", "armv4t", "armv5", "armv5t", "armv5te",
"armv5tej", "armv6", "armv6k", "armv6kz", "armv6-m", "armv6s-m",
"armv6t2", "armv7", "armv7e-m", "armv8-a", "armv8-m.base",
"armv8-m.main", "armv8-r", "ep9312", "iwmmxt", "iwmmxt2", "xscale".
These values can be displayed on arm gdb prompt by typing
"set architecture " followed by a TAB for autocompletion.

Set the gdb architecture value for all arm targets to "arm".

Change-Id: I176cb89878606e1febd546ce26543b3e7849500a
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4754
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target/stm8: add support for multi-architecture gdb

GDB can be built for multi-architecture through the command
./configure --enable-targets=all && make
Such multi-architecture GDB requires the target's architecture to
be selected either manually by the user through the GDB command
"set architecture" or automatically by the target description sent
by the remote target (i.e. OpenOCD).

Commit e65acd889c61a424c7bd72fdee5d6a3aee1d8504 ("gdb_server: add
support for architecture element") already provides the required
infrastructure to support multi-architecture gdb.

The gdb patches for stm8 are still not merged in the official
repository and are temporarily hosted in
https://stm8-binutils-gdb.sourceforge.io/
The latest patch set
stm8-binutils-gdb-sources-2018-03-04.tar.gz
define only one possible value ("stm8") for this architecture; it
can be displayed typing "set architecture " followed by a TAB for
autocompletion in gdb for stm8.

Set the gdb architecture value for stm8 to "stm8".

Change-Id: I643ceba662de46cecf061d1dc672b9178a077f1b
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/4753
Tested-by: jenkins
Reviewed-by: Ake Rehnman <ake.rehnman@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

armv7m: always set xPSR.T=1 when starting an algorithm

xPSR.T sets the processor to Thumb mode when set to 1. ARMv7-M only
supports execution of Thumb instructions, so it must always be set to 1.

If xPSR.T is set to 0 on armv7m, a usage fault is generated when a
instruction execution is attempted.

On armv7m, issuing a reset causes the vector table to be examined. PC
and xPSR.T  are loaded from the vector table at byte offset 4. xPSR.T is
taken from the least significant bit this value, PC from the remaining
bits.  This occurs even with `reset halt`, as the reset itself causes
this load to occur without the execution of any instructions.

As a result of this, following a reset with a "bad" value programmed in
the vector table, openocd would be unable to run algorithms on the
target, as running them would immediately result in a usage fault due to
xPSR.T being unset (0).

Allow algorithms to run regardless of the content of the vector table by
explicitly setting xPSR so that xPSR.T=1 prior to executing an
algorithm. One can think of this as openocd more closely emulating a
reset or branch instruction in executing it's algorithms.

Ticket: https://sourceforge.net/p/openocd/tickets/203/
Signed-off-by: Cody P Schafer <openocd@codyps.com>
Change-Id: I4dc3427ab195d06c3fd780ea768027fefccc4c28
Reviewed-on: http://openocd.zylin.com/4658
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

icepick.cfg: add cancel reset bit to TAP register writes

The Agama family of devices (CC26x2/CC13x2) required an
additional bit to be set when adding the core's TAP into
the scan chain. The cancel reset bit 0x10000 tells the
ICEPick to take the bus out of reset so that the other
bits will take effect. This bit is a NOP on other devices
and ICEPicks, so the change shouldn't adversely affect
other devices.

Change-Id: I9245eef0936ea7eea28ae84ab5e8ce05fa63af40
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4789
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

drivers: xds110: Add support for XDS110 stand-alone probe

The XDS110 stand-alone version has the ability to supply
voltage to the target board via it's AUX FUNCTIONS port.
Added command to enable setting the voltage on the XDS110
stand-alone.

Change-Id: I2f21c4a3d15ed99e649f3a83973c5e724c4bfeb6
Signed-off-by: Edward Fewell <efewell@ti.com>
Reviewed-on: http://openocd.zylin.com/4793
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

HACKING: add note about refs/for/master

The fact that one needs to always push contributions to a single
remote reference (refs/for/master) might seem odd to people unfamiliar
with Gerrit. GitHub, for instance, hosts personal repositories where
developers typically create topic branches for each contribution and
use a proprietary mecanism to request a review (the "pull request").
More generally, one normally does not expect to be able to push
non-fast-forwarding stuff to a remote branch.

This commit adds a clarifying note to the patch guidelines.

Change-Id: Ia750b815b82b18e92b6109c07f451000dcbecf9b
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-on: http://openocd.zylin.com/4806
Tested-by: jenkins
Reviewed-by: Christopher Head <chead@zaber.com>
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

HACKING: replace refs/publish/master with refs/for/master

refs/publish/master is deprecated and gives a warning in newer Gerrit.
Replace with refs/for/master.

Change-Id: I56871cc6e80c014ba81f4458230cd67dc318ecb3
Suggested-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-on: http://openocd.zylin.com/4810
Tested-by: jenkins
Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

NOR: lpc2000 Add support for LPC84x devices

These devices differ from LPC8xx devices in that they have a different
IAP entry point, but everything else is the same.  Using Tcl to pass
different IAP entry point.
no new Clang analyser warnings and no new build sanitizers issues.

Change-Id: I2d654dd250f416e74262c0228cad8713a283402f
Signed-off-by: Rod Boyce <developer@teamboyce.co.uk>
Reviewed-on: http://openocd.zylin.com/4684
Reviewed-by: Jean-Christian de Rivaz <jcamdr70@gmail.com>
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash: nor: ath79: remove base calculation

Currently it is impossible to flash ELF with correct offsets. The reason
is a bogus offset calculation extracted from base.
Since any other spi drivers do not care about base, do the same for
ath79 as well.

Change-Id: I9e46e01c9e7a709c2d07da9203c634f302603afd
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Reviewed-on: http://openocd.zylin.com/4821
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor/nrf5: set correct timeout for nvmc operations

Longest erase all FLASH for nRF5 series is 295.3 ms for nRF52832.
Timeout period now is set to 340 ms (295.3 + 15%)

Change-Id: Iae00ed7b634f111b9798db11e35e4e066d4aaa95
Signed-off-by: Jānis Skujenieks <janis.skujenieks@gmail.com>
Reviewed-on: http://openocd.zylin.com/4822
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

target/arm_cti : export CTI APPPULSE and INACK register

this permits the full control of CTI from config files

Change-Id: Ia27ac8e12e08ec72da05f26dcbd81d24fa1a0f6f
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/4815
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

target/arm_cti: add debug message when an incorrect CTI register name is used

the patch also contains some typo fixes

Change-Id: Ia4267036068455144cdcbfdffed15518d48f445e
Signed-off-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-on: http://openocd.zylin.com/4816
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>

command: Log the failed command name

Change-Id: I03938a845110002755636a9514b17a213bf1cc72
Signed-off-by: Jean-Christian de Rivaz <jcamdr70@gmail.com>
Reviewed-on: http://openocd.zylin.com/4808
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
Tested-by: jenkins

Add LPC8Nxx and NHS3xx support.

Change-Id: I0bdbca8dd9b234aca355230af7269463c9f70bd1
Signed-off-by: Jean-Christian de Rivaz <jcamdr70@gmail.com>
Reviewed-on: http://openocd.zylin.com/4515
Tested-by: jenkins
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

add w600 support

w600 is a wifi soc from winner micro(www.winnermicro.com).

Change-Id: Ib8ccd6e52baefca6547fb97d29db75db0ee73948
Signed-off-by: Simon Qian <versaloon@simonqian.com>
Reviewed-on: http://openocd.zylin.com/4801
Tested-by: jenkins
Reviewed-by: yichen <wdyichen@wdyichen.cn>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

flash/nor/spi: add adesto AT25DF081A

8Mbit SPI flash on SAM D21 Xplained board

Change-Id: Iec087f5d889c1cbdd4fed90863e73511f6101cec
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4802
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target: allow moving and resizing working area on running target

target configure -work-area-xxx calls target_free_all_working_areas()
and sets the desired new parameter. Without this change the working area
does not get reallocated if it has been allocated before.
target_free_all_working_areas() results in work area containing one block
marked as free.

Completely free working area in target_free_all_working_areas()

Change-Id: I79c681082f32f2a96a2b40eb3b8751e427549693
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4797
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target: move all working_area functions to one block

The block of code moved without any changes

Change-Id: I70b82dc3315dcc3f34de0537b362bee230007d02
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4796
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target/cortex_m: fix cortex_m reset_config help and check for syntax error

Remove option 'srst' which is not recognized from on-line help and texi.
Check parameter and return syntax error if wrong option is entered.

Change-Id: I87daa423a9f53193a0b015080594820b933628f5
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4795
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target/cortex_m: do not use VECTRESET on Cortex-M0, M0+ and M1

Cortex-M0, M0+ and M1 do not support VECTRESET bit in AIRCR.
Without this change the 'reset' command silently fails if VECTRESET
is requested.

Detect these cores, show warning if VECTRESET is about to use
and use SYSRESETREQ instead.

Change-Id: Ief174373e3ef0e6b287c57911c0aca4dfa8209f2
Signed-off-by: Tomas Vanek <vanekt@fbl.cz>
Reviewed-on: http://openocd.zylin.com/4794
Tested-by: jenkins
Reviewed-by: Jean-Christian de Rivaz <jcamdr70@gmail.com>
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

target: armv8: Add TARGET_HALTED check for gdb connect

This commit adds TARGET_HALTED check in armv8_get_core_reg32()
and armv8_set_core_reg32() to void a crash issue when gdb connects
but fails to halt the ARM core. Similar logic can be found in
armv8_get_core_reg() and armv8_set_core_reg().

Below is the call stack information of this case when gdb connects.

(gdb) bt
    regnum=regnum@entry=0, dpm=0x990110) at src/target/armv8_dpm.c:657
    r=0x9c7240, regnum=0, mode=<optimized out>) at src/target/armv8_dpm.c:974
    at src/target/armv8.c:1487
    packet=0x8ec8e0 <gdb_packet_buffer.9962> "g",
    packet_size=<optimized out>, connection=<optimized out>)
    at src/server/gdb_server.c:1200
    at src/server/gdb_server.c:3180
    command_context=command_context@entry=0x935010)
    at src/server/server.c:566
...

Change-Id: I159837b533f110998184f910a0abe48409bd58f1
Signed-off-by: Liming Sun <lsun@mellanox.com>
Reviewed-on: http://openocd.zylin.com/4758
Tested-by: jenkins
Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)