From 06123153f38280608b1e92dcb766b31ade7e4668 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Andreas=20F=C3=A4rber?= Date: Tue, 3 May 2016 23:47:54 +0200 Subject: [PATCH] psoc5lp: Add NV Latch flash driver MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Erasing is not supported by the hardware, it can be written directly. Tested on CY8CKIT-059, except modifying-write. Change-Id: I6e920ed930dcd5c7f0b10c5b1b4791a828d9080a Signed-off-by: Andreas Färber Signed-off-by: Tomas Vanek Reviewed-on: http://openocd.zylin.com/3434 Tested-by: jenkins --- doc/openocd.texi | 25 ++++ src/flash/nor/drivers.c | 2 + src/flash/nor/psoc5lp.c | 316 ++++++++++++++++++++++++++++++++++++++++ tcl/target/psoc5lp.cfg | 1 + 4 files changed, 344 insertions(+) diff --git a/doc/openocd.texi b/doc/openocd.texi index d8a7bb9236..0122224c7d 100644 --- a/doc/openocd.texi +++ b/doc/openocd.texi @@ -6179,6 +6179,31 @@ flash bank $_CHIPNAME.eeprom psoc5lp_eeprom 0x40008000 0 0 0 $_TARGETNAME @end example @end deffn +@deffn {Flash Driver} psoc5lp_nvl +All members of the PSoC 5LP microcontroller family from Cypress +include internal Nonvolatile Latches and use ARM Cortex-M3 cores. +The driver probes for a number of these chips and autoconfigures itself. + +@example +flash bank $_CHIPNAME.nvl psoc5lp_nvl 0 0 0 0 $_TARGETNAME +@end example + +PSoC 5LP chips have multiple NV Latches: + +@itemize +@item Device Configuration NV Latch - 4 bytes +@item Write Once (WO) NV Latch - 4 bytes +@end itemize + +@b{Note:} This driver only implements the Device Configuration NVL. + +The @var{psoc5lp} driver reads the ECC mode from Device Configuration NVL. +@quotation Attention +Switching ECC mode via write to Device Configuration NVL will require a reset +after successful write. +@end quotation +@end deffn + @deffn {Flash Driver} psoc6 Supports PSoC6 (CY8C6xxx) family of Cypress microcontrollers. PSoC6 is a dual-core device with CM0+ and CM4 cores. Both cores share diff --git a/src/flash/nor/drivers.c b/src/flash/nor/drivers.c index 2d391d28c3..6e1703b417 100644 --- a/src/flash/nor/drivers.c +++ b/src/flash/nor/drivers.c @@ -58,6 +58,7 @@ extern struct flash_driver pic32mx_flash; extern struct flash_driver psoc4_flash; extern struct flash_driver psoc5lp_flash; extern struct flash_driver psoc5lp_eeprom_flash; +extern struct flash_driver psoc5lp_nvl_flash; extern struct flash_driver psoc6_flash; extern struct flash_driver sim3x_flash; extern struct flash_driver stellaris_flash; @@ -119,6 +120,7 @@ static struct flash_driver *flash_drivers[] = { &psoc4_flash, &psoc5lp_flash, &psoc5lp_eeprom_flash, + &psoc5lp_nvl_flash, &psoc6_flash, &sim3x_flash, &stellaris_flash, diff --git a/src/flash/nor/psoc5lp.c b/src/flash/nor/psoc5lp.c index 1b46020a65..ae8e3d3bc1 100644 --- a/src/flash/nor/psoc5lp.c +++ b/src/flash/nor/psoc5lp.c @@ -29,6 +29,7 @@ #define PM_ACT_CFG12 0x400043AC #define SPC_CPU_DATA 0x40004720 #define SPC_SR 0x40004722 +#define PRT1_PC2 0x4000500A #define PHUB_CH0_BASIC_CFG 0x40007010 #define PHUB_CH0_ACTION 0x40007014 #define PHUB_CH0_BASIC_STATUS 0x40007018 @@ -45,6 +46,11 @@ #define PHUB_TDMEM1_ORIG_TD1 0x4000780C #define PANTHER_DEVICE_ID 0x4008001C +/* NVL is not actually mapped to the Cortex-M address space + * As we need a base addess different from other banks in the device + * we use the address of NVL programming data in Cypress images */ +#define NVL_META_BASE 0x90000000 + #define PM_ACT_CFG12_EN_EE (1 << 4) #define SPC_KEY1 0xB6 @@ -359,6 +365,31 @@ static int psoc5lp_spc_busy_wait_idle(struct target *target) return ERROR_FLASH_OPERATION_FAILED; } +static int psoc5lp_spc_load_byte(struct target *target, + uint8_t array_id, uint8_t offset, uint8_t value) +{ + int retval; + + retval = psoc5lp_spc_write_opcode(target, SPC_LOAD_BYTE); + if (retval != ERROR_OK) + return retval; + retval = target_write_u8(target, SPC_CPU_DATA, array_id); + if (retval != ERROR_OK) + return retval; + retval = target_write_u8(target, SPC_CPU_DATA, offset); + if (retval != ERROR_OK) + return retval; + retval = target_write_u8(target, SPC_CPU_DATA, value); + if (retval != ERROR_OK) + return retval; + + retval = psoc5lp_spc_busy_wait_idle(target); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + static int psoc5lp_spc_load_row(struct target *target, uint8_t array_id, const uint8_t *data, unsigned row_size) { @@ -446,6 +477,25 @@ static int psoc5lp_spc_write_row(struct target *target, return ERROR_OK; } +static int psoc5lp_spc_write_user_nvl(struct target *target, + uint8_t array_id) +{ + int retval; + + retval = psoc5lp_spc_write_opcode(target, SPC_WRITE_USER_NVL); + if (retval != ERROR_OK) + return retval; + retval = target_write_u8(target, SPC_CPU_DATA, array_id); + if (retval != ERROR_OK) + return retval; + + retval = psoc5lp_spc_busy_wait_idle(target); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + static int psoc5lp_spc_erase_sector(struct target *target, uint8_t array_id, uint8_t row_id) { @@ -545,6 +595,272 @@ static int psoc5lp_spc_get_temp(struct target *target, uint8_t samples, return ERROR_OK; } +static int psoc5lp_spc_read_volatile_byte(struct target *target, + uint8_t array_id, uint8_t offset, uint8_t *data) +{ + int retval; + + retval = psoc5lp_spc_write_opcode(target, SPC_READ_VOLATILE_BYTE); + if (retval != ERROR_OK) + return retval; + retval = target_write_u8(target, SPC_CPU_DATA, array_id); + if (retval != ERROR_OK) + return retval; + retval = target_write_u8(target, SPC_CPU_DATA, offset); + if (retval != ERROR_OK) + return retval; + + retval = psoc5lp_spc_busy_wait_data(target); + if (retval != ERROR_OK) + return retval; + + retval = target_read_u8(target, SPC_CPU_DATA, data); + if (retval != ERROR_OK) + return retval; + + retval = psoc5lp_spc_busy_wait_idle(target); + if (retval != ERROR_OK) + return retval; + + return ERROR_OK; +} + +/* + * NV Latch + */ + +struct psoc5lp_nvl_flash_bank { + bool probed; + const struct psoc5lp_device *device; +}; + +static int psoc5lp_nvl_read(struct flash_bank *bank, + uint8_t *buffer, uint32_t offset, uint32_t count) +{ + int retval; + + retval = psoc5lp_spc_enable_clock(bank->target); + if (retval != ERROR_OK) + return retval; + + while (count > 0) { + retval = psoc5lp_spc_read_byte(bank->target, + SPC_ARRAY_NVL_USER, offset, buffer); + if (retval != ERROR_OK) + return retval; + buffer++; + offset++; + count--; + } + + return ERROR_OK; +} + +static int psoc5lp_nvl_erase(struct flash_bank *bank, int first, int last) +{ + LOG_WARNING("There is no erase operation for NV Latches"); + return ERROR_FLASH_OPER_UNSUPPORTED; +} + +static int psoc5lp_nvl_erase_check(struct flash_bank *bank) +{ + int i; + + for (i = 0; i < bank->num_sectors; i++) + bank->sectors[i].is_erased = 0; + + return ERROR_OK; +} + +static int psoc5lp_nvl_write(struct flash_bank *bank, + const uint8_t *buffer, uint32_t offset, uint32_t byte_count) +{ + struct target *target = bank->target; + uint8_t *current_data, val; + bool write_required = false, pullup_needed = false, ecc_changed = false; + uint32_t i; + int retval; + + if (offset != 0 || byte_count != bank->size) { + LOG_ERROR("NVL can only be written in whole"); + return ERROR_FLASH_OPER_UNSUPPORTED; + } + + current_data = calloc(1, bank->size); + if (!current_data) + return ERROR_FAIL; + retval = psoc5lp_nvl_read(bank, current_data, offset, byte_count); + if (retval != ERROR_OK) { + free(current_data); + return retval; + } + for (i = offset; i < byte_count; i++) { + if (current_data[i] != buffer[i]) { + write_required = true; + break; + } + } + if (((buffer[2] & 0x80) == 0x80) && ((current_data[0] & 0x0C) != 0x08)) + pullup_needed = true; + if (((buffer[3] ^ current_data[3]) & 0x08) == 0x08) + ecc_changed = true; + free(current_data); + + if (!write_required) { + LOG_INFO("Unchanged, skipping NVL write"); + return ERROR_OK; + } + if (pullup_needed) { + retval = target_read_u8(target, PRT1_PC2, &val); + if (retval != ERROR_OK) + return retval; + val &= 0xF0; + val |= 0x05; + retval = target_write_u8(target, PRT1_PC2, val); + if (retval != ERROR_OK) + return retval; + } + + for (i = offset; i < byte_count; i++) { + retval = psoc5lp_spc_load_byte(target, + SPC_ARRAY_NVL_USER, i, buffer[i]); + if (retval != ERROR_OK) + return retval; + + retval = psoc5lp_spc_read_volatile_byte(target, + SPC_ARRAY_NVL_USER, i, &val); + if (retval != ERROR_OK) + return retval; + if (val != buffer[i]) { + LOG_ERROR("Failed to load NVL byte %" PRIu32 ": " + "expected 0x%02" PRIx8 ", read 0x%02" PRIx8, + i, buffer[i], val); + return ERROR_FLASH_OPERATION_FAILED; + } + } + + retval = psoc5lp_spc_write_user_nvl(target, SPC_ARRAY_NVL_USER); + if (retval != ERROR_OK) + return retval; + + if (ecc_changed) { + retval = target_call_reset_callbacks(target, RESET_INIT); + if (retval != ERROR_OK) + LOG_WARNING("Reset failed after enabling or disabling ECC"); + } + + return ERROR_OK; +} + +static int psoc5lp_nvl_protect_check(struct flash_bank *bank) +{ + int i; + + for (i = 0; i < bank->num_sectors; i++) + bank->sectors[i].is_protected = -1; + + return ERROR_OK; +} + +static int psoc5lp_nvl_get_info_command(struct flash_bank *bank, + char *buf, int buf_size) +{ + struct psoc5lp_nvl_flash_bank *psoc_nvl_bank = bank->driver_priv; + char part_number[PART_NUMBER_LEN]; + + psoc5lp_get_part_number(psoc_nvl_bank->device, part_number); + + snprintf(buf, buf_size, "%s", part_number); + + return ERROR_OK; +} + +static int psoc5lp_nvl_probe(struct flash_bank *bank) +{ + struct psoc5lp_nvl_flash_bank *psoc_nvl_bank = bank->driver_priv; + int retval; + + if (psoc_nvl_bank->probed) + return ERROR_OK; + + if (bank->target->state != TARGET_HALTED) { + LOG_ERROR("Target not halted"); + return ERROR_TARGET_NOT_HALTED; + } + + retval = psoc5lp_find_device(bank->target, &psoc_nvl_bank->device); + if (retval != ERROR_OK) + return retval; + + bank->base = NVL_META_BASE; + bank->size = 4; + bank->num_sectors = 1; + bank->sectors = calloc(bank->num_sectors, + sizeof(struct flash_sector)); + bank->sectors[0].offset = 0; + bank->sectors[0].size = 4; + bank->sectors[0].is_erased = -1; + bank->sectors[0].is_protected = -1; + + psoc_nvl_bank->probed = true; + + return ERROR_OK; +} + +static int psoc5lp_nvl_auto_probe(struct flash_bank *bank) +{ + struct psoc5lp_nvl_flash_bank *psoc_nvl_bank = bank->driver_priv; + + if (psoc_nvl_bank->probed) + return ERROR_OK; + + return psoc5lp_nvl_probe(bank); +} + +FLASH_BANK_COMMAND_HANDLER(psoc5lp_nvl_flash_bank_command) +{ + struct psoc5lp_nvl_flash_bank *psoc_nvl_bank; + + psoc_nvl_bank = malloc(sizeof(struct psoc5lp_nvl_flash_bank)); + if (!psoc_nvl_bank) + return ERROR_FLASH_OPERATION_FAILED; + + psoc_nvl_bank->probed = false; + + bank->driver_priv = psoc_nvl_bank; + + return ERROR_OK; +} + +static const struct command_registration psoc5lp_nvl_exec_command_handlers[] = { + COMMAND_REGISTRATION_DONE +}; + +static const struct command_registration psoc5lp_nvl_command_handlers[] = { + { + .name = "psoc5lp_nvl", + .mode = COMMAND_ANY, + .help = "PSoC 5LP NV Latch command group", + .usage = "", + .chain = psoc5lp_nvl_exec_command_handlers, + }, + COMMAND_REGISTRATION_DONE +}; + +struct flash_driver psoc5lp_nvl_flash = { + .name = "psoc5lp_nvl", + .commands = psoc5lp_nvl_command_handlers, + .flash_bank_command = psoc5lp_nvl_flash_bank_command, + .info = psoc5lp_nvl_get_info_command, + .probe = psoc5lp_nvl_probe, + .auto_probe = psoc5lp_nvl_auto_probe, + .protect_check = psoc5lp_nvl_protect_check, + .read = psoc5lp_nvl_read, + .erase = psoc5lp_nvl_erase, + .erase_check = psoc5lp_nvl_erase_check, + .write = psoc5lp_nvl_write, +}; + /* * EEPROM */ diff --git a/tcl/target/psoc5lp.cfg b/tcl/target/psoc5lp.cfg index 2089158e2b..b4e8d05fa6 100644 --- a/tcl/target/psoc5lp.cfg +++ b/tcl/target/psoc5lp.cfg @@ -58,6 +58,7 @@ $_TARGETNAME configure -event reset-init { set _FLASHNAME $_CHIPNAME.flash flash bank $_FLASHNAME psoc5lp 0x00000000 0 0 0 $_TARGETNAME flash bank $_CHIPNAME.eeprom psoc5lp_eeprom 0x40008000 0 0 0 $_TARGETNAME +flash bank $_CHIPNAME.nvl psoc5lp_nvl 0 0 0 0 $_TARGETNAME if {![using_hla]} { cortex_m reset_config sysresetreq -- 2.30.2