From 0e4f4bacdc3a5237fbc358d968ee7a8d72868d74 Mon Sep 17 00:00:00 2001
From: Freddie Chopin <freddie_chopin@op.pl>
Date: Fri, 21 May 2010 17:52:25 +0200
Subject: [PATCH] Update "flash bank" helper comments for LPC2xxx chips

Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
---
 tcl/target/lpc1768.cfg | 1 +
 tcl/target/lpc2103.cfg | 2 +-
 tcl/target/lpc2124.cfg | 2 +-
 tcl/target/lpc2129.cfg | 2 +-
 tcl/target/lpc2148.cfg | 2 +-
 tcl/target/lpc2294.cfg | 2 +-
 tcl/target/lpc2378.cfg | 2 +-
 tcl/target/lpc2478.cfg | 2 +-
 8 files changed, 8 insertions(+), 7 deletions(-)

diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg
index 82a097f4a2..fc00d78def 100644
--- a/tcl/target/lpc1768.cfg
+++ b/tcl/target/lpc1768.cfg
@@ -42,6 +42,7 @@ $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size 0x8000
 
 # LPC1768 has 512kB of flash memory, managed by ROM code (including a
 # boot loader which verifies the flash exception table's checksum).
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x80000 0 0 $_TARGETNAME \
 	lpc1700 $_CCLK calc_checksum
diff --git a/tcl/target/lpc2103.cfg b/tcl/target/lpc2103.cfg
index 2ebe91aea1..b0a66bc1bb 100644
--- a/tcl/target/lpc2103.cfg
+++ b/tcl/target/lpc2103.cfg
@@ -34,6 +34,6 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x2000 -work-area-backup 0
 
 # 32kB of internal Flash, core clocked with 12MHz crystal
-# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum]
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x8000 0 0 $_TARGETNAME lpc2000_v2 12000 calc_checksum
diff --git a/tcl/target/lpc2124.cfg b/tcl/target/lpc2124.cfg
index 1b60c15536..259088d3ce 100644
--- a/tcl/target/lpc2124.cfg
+++ b/tcl/target/lpc2124.cfg
@@ -38,6 +38,6 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
 
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14745 calc_checksum
diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg
index 5b2a2f74b5..1ecf7d0d82 100644
--- a/tcl/target/lpc2129.cfg
+++ b/tcl/target/lpc2129.cfg
@@ -37,6 +37,6 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 
 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
diff --git a/tcl/target/lpc2148.cfg b/tcl/target/lpc2148.cfg
index 502a355065..2199abc4c0 100644
--- a/tcl/target/lpc2148.cfg
+++ b/tcl/target/lpc2148.cfg
@@ -51,6 +51,6 @@ $_TARGETNAME configure -event reset-init {
 	mwb 0xE01FC040 0x01
 }
 
-# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc_checksum]
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x7d000 0 0 $_TARGETNAME lpc2000_v2 14765 calc_checksum
diff --git a/tcl/target/lpc2294.cfg b/tcl/target/lpc2294.cfg
index 9ac3c6c1d7..023b4453cc 100644
--- a/tcl/target/lpc2294.cfg
+++ b/tcl/target/lpc2294.cfg
@@ -31,7 +31,7 @@ target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAM
 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
 #flash configuration
-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum
 
diff --git a/tcl/target/lpc2378.cfg b/tcl/target/lpc2378.cfg
index 1a42e07033..a3c0992309 100644
--- a/tcl/target/lpc2378.cfg
+++ b/tcl/target/lpc2378.cfg
@@ -42,7 +42,7 @@ $_TARGETNAME configure -event reset-init {
 
 # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
 # After reset the chip uses its internal 4MHz RC oscillator
-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x0007D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum
 
diff --git a/tcl/target/lpc2478.cfg b/tcl/target/lpc2478.cfg
index 57aa36fd01..c430e43a63 100644
--- a/tcl/target/lpc2478.cfg
+++ b/tcl/target/lpc2478.cfg
@@ -42,7 +42,7 @@ $_TARGETNAME configure -event reset-init {
 
 # LPC2378 has 512kB of FLASH, but upper 8kB are occupied by bootloader.
 # After reset the chip uses its internal 4MHz RC oscillator.
-# flash bank lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x7D000 0 0 $_TARGETNAME lpc2000_v2 4000 calc_checksum
 
-- 
2.30.2