From 38607b2e560fc4d9a24e594fc0bdd66d574faea9 Mon Sep 17 00:00:00 2001 From: Robert Jordens Date: Mon, 15 Jan 2018 10:53:48 +0000 Subject: [PATCH] tcl/board: add support for Kasli Kasli is an open hardware FPGA board. It is part of the Sinara family of devices designed to control quantum physics experiments (see Sayma_AMC for other boards already suppported by openocd). Kasli was developed as part of the opticlock project. It features a Xilinx Artix 7 100T FPGA, DDR3 RAM, a clock reconstruction and distribution network, four 6 Gb/s transceiver links (three SFP and one SATA) as well as interfaces to up to 12 Eurocard Extension Modules (EEMs). https://github.com/m-labs/sinara/wiki/Kasli http://www.opticlock.de/en/ Change-Id: I88b5e9f16b79e1e731056c45da6b5e1448d2c0e7 Signed-off-by: Robert Jordens Reviewed-on: http://openocd.zylin.com/4341 Tested-by: jenkins Reviewed-by: Matthias Welwarsky --- tcl/board/kasli.cfg | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 tcl/board/kasli.cfg diff --git a/tcl/board/kasli.cfg b/tcl/board/kasli.cfg new file mode 100644 index 0000000000..caa294f82e --- /dev/null +++ b/tcl/board/kasli.cfg @@ -0,0 +1,13 @@ +interface ftdi +ftdi_device_desc "Quad RS232-HS" +ftdi_vid_pid 0x0403 0x6011 +ftdi_channel 0 +ftdi_layout_init 0x0008 0x000b +# ftdi_location 1:8 + +reset_config none +transport select jtag +adapter_khz 25000 + +source [find cpld/xilinx-xc7.cfg] +source [find cpld/jtagspi.cfg] -- 2.30.2