From 4f2655c28ba9dd1c259b4b48741f2bec933e4592 Mon Sep 17 00:00:00 2001 From: Uwe Hermann Date: Wed, 19 Oct 2011 01:09:44 +0200 Subject: [PATCH] Toshiba TMPA900 config: Fix incorrect working area. The Toshiba TMPA900 series (TMPA900/901) only has internal RAM regions RAM-0 (16kB) and RAM-1 (8kB) which we can use as working area. This is probably a copy-paste error from tmpa910.cfg, which has the correct values and sizes for the TMPA910 series (TMPA910/911/912/913): there are RAM-0, RAM-1, and RAM-2 (each 16kB). Also, change "built-in RAM" to "internal RAM" to match what the datasheet uses. Change-Id: I993cd6b7fadc28cf34e5cc18426bb2bb42597670 Signed-off-by: Uwe Hermann Reviewed-on: http://openocd.zylin.com/34 Tested-by: jenkins Reviewed-by: Peter Stuge --- tcl/target/tmpa900.cfg | 16 +++++----------- tcl/target/tmpa910.cfg | 15 +++++---------- 2 files changed, 10 insertions(+), 21 deletions(-) diff --git a/tcl/target/tmpa900.cfg b/tcl/target/tmpa900.cfg index d5b458fd74..90851f69cb 100644 --- a/tcl/target/tmpa900.cfg +++ b/tcl/target/tmpa900.cfg @@ -42,15 +42,9 @@ jtag_ntrst_delay 20 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -# built-in RAM0 -#working_area 0 0xf8004000 0x4000 nobackup -# built-in RAM1 -#working_area 1 0xf8008000 0x4000 nobackup -# built-in RAM2 -#working_area 2 0xf800c000 0x4000 nobackup -# built-in RAM 0-2 48k total -#working_area 0 0xf8004000 0xc000 nobackup - -# Internal sram1 memory -$_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0x8000 \ +# Internal RAM-0 (16kB): 0xf8004000 +# Internal RAM-1 (8kB): 0xf8008000 + +# Use internal RAM-0 and RAM-1 as working area (24kB total). +$_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0x6000 \ -work-area-backup 0 diff --git a/tcl/target/tmpa910.cfg b/tcl/target/tmpa910.cfg index fa6f87b007..36874d94d0 100644 --- a/tcl/target/tmpa910.cfg +++ b/tcl/target/tmpa910.cfg @@ -42,15 +42,10 @@ jtag_ntrst_delay 20 set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME arm926ejs -endian $_ENDIAN -chain-position $_TARGETNAME -# built-in RAM0 -#working_area 0 0xf8004000 0x4000 nobackup -# built-in RAM1 -#working_area 1 0xf8008000 0x4000 nobackup -# built-in RAM2 -#working_area 2 0xf800c000 0x4000 nobackup -# built-in RAM 0-2 48k total -#working_area 0 0xf8004000 0xc000 nobackup - -# Internal sram1 memory +# Internal RAM-0 (16kB): 0xf8004000 +# Internal RAM-1 (16kB): 0xf8008000 +# Internal RAM-2 (16kB): 0xf800c000 + +# Use internal RAM-0, RAM-1, and RAM-2 as working area (48kB total). $_TARGETNAME configure -work-area-phys 0xf8004000 -work-area-size 0xc000 \ -work-area-backup 0 -- 2.30.2