From 66c6665288402ef8463e844f8873b2c8d3a9949d Mon Sep 17 00:00:00 2001 From: Ash Charles Date: Wed, 16 Apr 2014 17:32:23 -0700 Subject: [PATCH 1/1] Add support for Gumstix AeroCore device The Gumstix AeroCore board [1] contains a STM32F427 microcontroller. Schematics for this board will also be made available [2]. The JTAG interface for this chip can be accessed via a USB connection provided by an FTDI chip (0403:6011). [1] https://store.gumstix.com/index.php/products/585/ [2] https://pubs.gumstix.com/boards/AEROCORE Change-Id: I0bf3bb525f51528bedd807b1f7210b09ef2e1015 Signed-off-by: Ash Charles Reviewed-on: http://openocd.zylin.com/2117 Reviewed-by: Paul Fertser Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/board/gumstix-aerocore.cfg | 10 ++++++++++ 1 file changed, 10 insertions(+) create mode 100644 tcl/board/gumstix-aerocore.cfg diff --git a/tcl/board/gumstix-aerocore.cfg b/tcl/board/gumstix-aerocore.cfg new file mode 100644 index 0000000000..ba217c0431 --- /dev/null +++ b/tcl/board/gumstix-aerocore.cfg @@ -0,0 +1,10 @@ +# JTAG for the STM32F4x chip used on the Gumstix AeroCore is available on +# the first interface of a Quad FTDI chip. nTRST is bit 4. +interface ftdi +ftdi_vid_pid 0x0403 0x6011 + +ftdi_layout_init 0x0000 0x001b +ftdi_layout_signal nTRST -data 0x0010 + +source [find target/stm32f4x.cfg] +reset_config trst_only -- 2.30.2