From 9168eef15dc08937b600a8e05ba84c2adb6f4af0 Mon Sep 17 00:00:00 2001 From: Tim 'mithro' Ansell Date: Sun, 27 Sep 2015 20:54:07 +1000 Subject: [PATCH] tcl: Adding the Digilent Atlys board. The board is supported via the ixo-usb-jtag firmware. Change-Id: I1e8a5ead850c0843b8532a5b54a7e7117778278e Signed-off-by: Tim 'mithro' Ansell Reviewed-on: http://openocd.zylin.com/2962 Tested-by: jenkins Reviewed-by: Paul Fertser --- tcl/board/digilent_atlys.cfg | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 tcl/board/digilent_atlys.cfg diff --git a/tcl/board/digilent_atlys.cfg b/tcl/board/digilent_atlys.cfg new file mode 100644 index 0000000000..f298e3d73d --- /dev/null +++ b/tcl/board/digilent_atlys.cfg @@ -0,0 +1,17 @@ +# http://digilentinc.com/atlys/ +# +# The Digilent Atlys normally requires proprietary tools to program and will +# enumerate as: +# ID 1443:0007 Digilent Development board JTAG +# +# However, the ixo-usb-jtag project provides an alternative open firmware for +# the on board programmer. When using thie firmware the board will then +# enumerate as: +# ID 16c0:06ad Van Ooijen Technische Informatica +# (With SerialNumber == hw_nexys) +# +# See the interface/usb-jtag.cfg for more information. + +source [find interface/usb-jtag.cfg] +source [find cpld/xilinx-xc6s.cfg] +source [find cpld/jtagspi.cfg] -- 2.30.2