From c044c601213ee800cffb21e1f53a89285b3346c9 Mon Sep 17 00:00:00 2001 From: Paul Fertser Date: Thu, 31 Oct 2013 15:16:15 +0400 Subject: [PATCH 1/1] ftdi/tumpa.cfg: enable proper output buffer control, add another USB ID The schematics used for writing the config file were incorrect, real hardware needs ACBUS3 _low_ as it's connected directly to the output buffer's !OE pin. Also apparently sometimes TUMPA comes with default FTDI IDs. Real-life tested (including TRST and SRST) with a custom stm32f103 board, thanks to Mike Wang for the adapter sample. Change-Id: Iab566e6d14f8392030f6ff2c8d976e1b57cf5ce6 Signed-off-by: Paul Fertser Reviewed-on: http://openocd.zylin.com/1789 Tested-by: jenkins Reviewed-by: Spencer Oliver --- tcl/interface/ftdi/tumpa.cfg | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tcl/interface/ftdi/tumpa.cfg b/tcl/interface/ftdi/tumpa.cfg index a0cf332ac6..e4b59b118b 100644 --- a/tcl/interface/ftdi/tumpa.cfg +++ b/tcl/interface/ftdi/tumpa.cfg @@ -5,9 +5,9 @@ # interface ftdi -ftdi_vid_pid 0x0403 0x8a98 +ftdi_vid_pid 0x0403 0x8a98 0x0403 0x6010 -ftdi_layout_init 0x0838 0x087b +ftdi_layout_init 0x0038 0x087b ftdi_layout_signal nTRST -data 0x0020 ftdi_layout_signal nSRST -data 0x0010 -- 2.30.2