From e3773e3e3d1f1ee0dbb0b69e8babe8419784d1c1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sun, 10 Oct 2010 14:41:11 -0700 Subject: [PATCH] swj-dp.tcl (SWD infrastructure #1) Provide new helper proc that can set up either an SWD or JTAG DAP based on the transport which is in use -- mostly for SWJ-DP. Also update some SWJ-DP based chips/targets to use it. The goal is making SWD-vs-JTAG transparent in most places. SWJ-DP based chips really need this flexible configuration to cope with debug adapters that support different transports, without needing new target configs for each transport or adapter. For JTAG-DP, callers will use "jtag newtap" directly, as today; only one chip-level transport option exists. For SW-DP (e.g. LPC1[13]xx or EFM32, they'll use "swd newdap" directly (part of an upcoming SWD transport patch). Again, only one transport option exists, so hard-wiring is appropriate there. Signed-off-by: David Brownell --- tcl/target/lpc1768.cfg | 7 ++++++- tcl/target/stellaris.cfg | 13 +++++++++++++ tcl/target/swj-dp.tcl | 25 +++++++++++++++++++++++++ 3 files changed, 44 insertions(+), 1 deletion(-) create mode 100644 tcl/target/swj-dp.tcl diff --git a/tcl/target/lpc1768.cfg b/tcl/target/lpc1768.cfg index 4a1ff0bcc4..68b33c4bb5 100644 --- a/tcl/target/lpc1768.cfg +++ b/tcl/target/lpc1768.cfg @@ -1,5 +1,9 @@ # NXP LPC1768 Cortex-M3 with 512kB Flash and 32kB+32kB Local On-Chip SRAM, +# LPC17xx chips support both JTAG and SWD transports. +# Adapt based on what transport is active. +source [find target/swj-dp.tcl] + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -31,7 +35,8 @@ jtag_ntrst_delay 200 # LPC2000 & LPC1700 -> SRST causes TRST reset_config srst_pulls_trst -jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID +#jtag newtap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID +swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID set _TARGETNAME $_CHIPNAME.cpu target create $_TARGETNAME cortex_m3 -chain-position $_TARGETNAME diff --git a/tcl/target/stellaris.cfg b/tcl/target/stellaris.cfg index b663ce3dc3..bfe9087c15 100644 --- a/tcl/target/stellaris.cfg +++ b/tcl/target/stellaris.cfg @@ -1,5 +1,12 @@ # TI/Luminary Stellaris LM3S chip family +# Luminary chips support both JTAG and SWD transports. +# Adapt based on what transport is active. +source [find target/swj-dp.tcl] + +# For now we ignore the SPI and UART options, which +# are usable only for ISP style initial flash programming. + if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME } else { @@ -18,6 +25,12 @@ if { [info exists CPUTAPID ] } { set _CPUTAPID 0x0ba00477 } +# SWD DAP, and JTAG TAP, take same params for now; +# ... even though SWD ignores all except TAPID, and +# JTAG shouldn't need anything more then irlen. (and TAPID). +swj_newdap $_CHIPNAME cpu -irlen 4 -irmask 0xf \ + -expected-id $_CPUTAPID -ignore-version + if { [info exists WORKAREASIZE ] } { set _WORKAREASIZE $WORKAREASIZE } else { diff --git a/tcl/target/swj-dp.tcl b/tcl/target/swj-dp.tcl new file mode 100644 index 0000000000..377b7b5f41 --- /dev/null +++ b/tcl/target/swj-dp.tcl @@ -0,0 +1,25 @@ +# ARM Debug Interface V5 (ADI_V5) utility +# ... Mostly for SWJ-DP (not SW-DP or JTAG-DP, since +# SW-DP and JTAG-DP targets don't need to switch based +# on which transport is active. +# +# declare a JTAG or SWD Debug Access Point (DAP) +# based on the transport in use with this session. +# You can't access JTAG ops when SWD is active, etc. + +# params are currently what "jtag newtap" uses +# because OpenOCD internals are still strongly biased +# to JTAG .... but for SWD, "irlen" etc are ignored, +# and the internals work differently + +# for now, ignore non-JTAG and non-SWD transports +# (e.g. initial flash programming via SPI or UART) + +# split out "chip" and "tag" so we can someday handle +# them more uniformly irlen too...) + +proc swj_newdap {chip tag args} { +set tran [transport select] +if [string equal $tran "jtag"] { eval jtag newtap $chip $tag $args} +if [string equal $tran "swd"] { eval swd newdap $chip $tag $args } +} -- 2.30.2