From e4cff09137466adc615e7e1a705791dfd2266103 Mon Sep 17 00:00:00 2001 From: oharboe Date: Fri, 10 Jul 2009 07:21:12 +0000 Subject: [PATCH] David Brownell split EK board support out from the target CPU support . git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60 --- tcl/board/ek-lm3s3748.cfg | 17 +++++++++++++++++ tcl/target/lm3s3748.cfg | 35 +++++++++++------------------------ 2 files changed, 28 insertions(+), 24 deletions(-) create mode 100644 tcl/board/ek-lm3s3748.cfg diff --git a/tcl/board/ek-lm3s3748.cfg b/tcl/board/ek-lm3s3748.cfg new file mode 100644 index 0000000000..2c79a89fb0 --- /dev/null +++ b/tcl/board/ek-lm3s3748.cfg @@ -0,0 +1,17 @@ +# Stellaris lm3s3748 Evaluation Kit +# http://www.luminarymicro.com/products/lm3s3748_usb_h_d_evaluation_kits.html + +# NOTE: to use the on-board FT2232 JTAG interface: +# source [find interface/luminary.cfg] + +source [find target/lm3s3748.cfg] + +# LM3S parts don't support RTCK +jtag_khz 500 + +jtag_nsrst_delay 100 +jtag_ntrst_delay 100 + +# Board has only srst +reset_config srst_only + diff --git a/tcl/target/lm3s3748.cfg b/tcl/target/lm3s3748.cfg index 7321cb8ac7..47cf72ef05 100644 --- a/tcl/target/lm3s3748.cfg +++ b/tcl/target/lm3s3748.cfg @@ -1,7 +1,4 @@ -# Script for luminary lm3s3748 -# -# NB! work in progress! Duplicated from lm3s811.cfg, but does -# it need modification?? +# TI/Luminary Stellaris lm3s3748 if { [info exists CHIPNAME] } { set _CHIPNAME $CHIPNAME @@ -19,31 +16,21 @@ if { [info exists ENDIAN] } { if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { - # force an error till we get a good number set _CPUTAPID 0x3ba00477 } -# RCLK -jtag_khz 500 - -jtag_nsrst_delay 100 -jtag_ntrst_delay 100 - -#lm3s3748 Evaluation Board has only srst -reset_config srst_only - -#jtag scan chain +# JTAG scan chain jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 1 -irmask 0xf -expected-id $_CPUTAPID +# The "lm3s" variant works around an erratum when using Rev A of "DustDevil" +# parts (third generation, includes LM3S3748). It keeps the debug registers +# from being cleared, by using software reset not SRST; NOP on newer revs. +set _TARGETNAME $_CHIPNAME.cpu +target create $_TARGETNAME cortex_m3 -endian $_ENDIAN \ + -chain-position $_TARGETNAME -variant lm3s -# the luminary variant causes a software reset rather than asserting SRST -# this stops the debug registers from being cleared -# this will be fixed in later revisions of silicon -set _TARGETNAME [format "%s.cpu" $_CHIPNAME] -target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME -variant lm3s - -# 8k working area at base of ram -$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x20000000 -work-area-size 0x2000 -work-area-backup 0 +# 8k working area at base of ram, not backed up +$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 0x2000 -#flash configuration +# flash configuration -- one bank of 128K flash bank stellaris 0 0 0 0 0 -- 2.30.2