From 57c61cee4b538b449421bc6ff8ebca5be70e60b1 Mon Sep 17 00:00:00 2001 From: Tarek BOCHKATI Date: Sun, 1 Mar 2020 23:11:10 +0100 Subject: [PATCH] tcl/board: add st_nucleo_g4.cfg to cover known STM32G4 NUCLEO boards known boards are NUCLEO-G431KB, NUCLEO-G431RB and NUCLEO-G474RE note: this work safely with B-G431B-ESC1, B-G474E-DPOW1, STM32G474E-EVAL and STM32G484E-EVAL Change-Id: I132a97e1816620b182983edc8a4b272b52b9241d Signed-off-by: Tarek BOCHKATI Reviewed-on: https://review.openocd.org/c/openocd/+/5484 Reviewed-by: Andreas Bolsch Reviewed-by: Antonio Borneo Tested-by: jenkins --- tcl/board/st_nucleo_g4.cfg | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 tcl/board/st_nucleo_g4.cfg diff --git a/tcl/board/st_nucleo_g4.cfg b/tcl/board/st_nucleo_g4.cfg new file mode 100644 index 0000000000..8e583e77d5 --- /dev/null +++ b/tcl/board/st_nucleo_g4.cfg @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +# This is for all ST NUCLEO with any STM32G4. Known boards at the moment: +# NUCLEO-G431KB +# https://www.st.com/en/evaluation-tools/nucleo-g431kb.html +# NUCLEO-G431RB +# https://www.st.com/en/evaluation-tools/nucleo-g431rb.html +# NUCLEO-G474RE +# https://www.st.com/en/evaluation-tools/nucleo-g474re.html +# NUCLEO-G491RE +# https://www.st.com/en/evaluation-tools/nucleo-g491re.html + +source [find interface/stlink.cfg] + +transport select hla_swd + +source [find target/stm32g4x.cfg] + +reset_config srst_only -- 2.30.2