openocd.git
2011-06-17 Spencer Oliverbuild: add missing files to make dist
2011-06-17 Spencer Oliverbuild: pass correct flags to jimtcl during make distcheck
2011-06-17 Spencer Oliverbuild: add missing files from dist release
2011-06-16 Tomek CEDROADAPTER: Fixed transport selection mechanism to support...
2011-06-16 Tomek CEDROOPENOCD: Renamed ambiguous main2() into openocd_thread...
2011-06-16 Dale Lukas... Added Olimex STM32 {H,P}107.cfg board
2011-06-13 Øyvind Harboetransport: move files over to transport folder
2011-06-12 Øyvind HarboeHACKING: add tip on how to write comments
2011-06-12 rlrosaadded minimodule interface
2011-06-12 Rodrigo L.... doxy more
2011-06-12 Rodrigo L.... doxy & cleanup
2011-06-12 Rodrigo L.... fix protection behavior
2011-06-12 Rodrigo L.... cleanup trailing whitespaces
2011-06-12 Rodrigo L.... flash speed improved
2011-06-12 Rodrigo L.... removed unnecessary actions/controls
2011-06-12 Rodrigo L.... cleanup flash module command
2011-06-12 Rodrigo L.... fix read for verify_image
2011-06-12 Rodrigo L.... fix read speed improved by queueing commands
2011-06-12 Rodrigo L.... fix flash driver size, sector erase
2011-06-12 Rodrigo L.... Added minimodule (ftdi) interface
2011-06-08 Laurent CharpentierAdded configuration file for STM3220G-EVAL board.
2011-06-08 Laurent CharpentierAdded configuration file for stm32f2xxx.
2011-06-07 Øyvind HarboeSilence -O3 warning
2011-06-07 Freddie ChopinFix "unused variable" warnings (errors) detected with...
2011-06-05 Stefan Mahrmips: add nor flash write from memory block
2011-06-04 Rodrigo L.... crc check on flashed data
2011-06-04 Rodrigo L.... code cleanup
2011-06-04 Freddie ChopinFix "unused variable" warnings (errors) detected with...
2011-06-04 Freddie ChopinFix "unused variable" warnings (errors) detected with...
2011-06-02 Bearuptech2410
2011-06-01 Tormod Voldenbootstrap: Various code improvements
2011-06-01 Stefan Mahrmips: fixup fastdata
2011-06-01 Stefan Mahrmips: fix some more endian madness
2011-06-01 Laurent Charpentierbootstrap: fix argument handling
2011-05-29 Damjan MarionBoard definition for mini6410/tiny6410 (ARM1176)
2011-05-29 Stefan Mahrmips: fix swapping if running on big endian host
2011-05-29 Damjan MarionSMDK6410 is not target, move file to board
2011-05-28 Damjan MarionFixed values for Samung NAND chips
2011-05-28 Damjan MarionImprove NAND flash detection
2011-05-28 Damjan MarionReorganize NAND flash table
2011-05-28 Stefan Mahrmips: fix swapping if openocd is running on big endian...
2011-05-25 Alan BowmanReport actual current thread
2011-05-25 Alan BowmanAdd eCos/Cortex RTOS support
2011-05-25 Stefan Mahradd support for spansion flash on mindspeed c300 eval...
2011-05-23 Spencer Oliverdsp5680xx: whitespace cleanup
2011-05-23 Spencer OliverFix build issue under cygwin
2011-05-19 Rodrigo L.... flashing speed improved using queued jtag. error propag...
2011-05-18 Jie ZhangGet register value if it's invalid in cache.
2011-05-18 Alan BowmanCorrected test for invalid current_threadid
2011-05-18 Rodrigo L.... flash support (only full erase/write) for 568013 and...
2011-05-18 Rodrigo L.... partial support for 568013 and 568037, target integration.
2011-05-14 Alan BowmanCorrect stacking direction and use of address offset
2011-05-09 Michel Jaouencortex a : smp doc update
2011-05-05 Øyvind Harboebeagleboard: add support for various icepick versions
2011-05-05 Jonas Hoerbergat91rm9200-ek: add low default communication speed
2011-05-03 Alexandre Pereira... Add support for the lpc2460 target
2011-05-03 Alexandre Pereira... Make the lpc2xxx generic driver support romless parts
2011-05-03 Jie ZhangRemove useless MIPS code in avr32_ap7k.c.
2011-04-30 Jonas Hörbergadapter speed: require init script setting and centrali...
2011-04-28 Øyvind Harboeecos: add 64 bit types for sprintf/sscanf
2011-04-28 Michel Jaouenu8500.cfg : ste u8500 support
2011-04-28 Michel Jaouengdb_server : 'R' command replied by OK
2011-04-28 Michel Jaouencortex_a : smp support
2011-04-28 Michel Jaouensmp : infra for smp minimum support
2011-04-27 Øyvind Harboecfi: leave check on whether target is running to target...
2011-04-26 SimonQianadd STM32F2 revY
2011-04-26 SimonQianremove read of flash_size in STM32F2
2011-04-26 Damjan Marionbuspirate: fix building on some OSes
2011-04-19 Michel Jaouenrtos : compilation error on amd64
2011-04-19 Alexandre Pereira... Fix non cfi x16 nor flash connected to x8 bus. The...
2011-04-19 Alexandre Pereira... Make the LPC32xx nand driver support up to 5 address...
2011-04-19 Alexandre Pereira... Make the LPC32xx slc nand driver the default
2011-04-19 Øyvind Harboejtag: clarify jtag->init() and jtag->quit() definitions
2011-04-15 Broadcom Corporation... RTOS Thread awareness support wip
2011-04-14 Spencer Oliverpic32: update pic32mx flash driver
2011-04-13 Luca ElleroReplace byte-access to memory with faster word-access
2011-04-13 Luca ElleroAdd opcodes for load/store registers words immediate...
2011-04-13 Luca ElleroAdd preliminary support for Freescale iMX53
2011-04-13 Alexandre Pereira... Add the REV A tap id to the LPC3250 configuration
2011-04-13 Michel JAOUENcortex_a :apb mem read/write working with mmu_on
2011-04-13 Michel JAOUENcortex_a : multiple target on the same dap
2011-04-13 Michel JAOUENcortex_a : use dap ref from armv4_5common
2011-04-09 Jean-Christophe... at91: add at91sam9263 chip register definition
2011-04-09 Jean-Christophe... at91: add chip register definition and generic init...
2011-04-09 Jean-Christophe... add at91sam9263-ek support
2011-04-09 Jean-Christophe... add at91sam9261-ek support
2011-04-09 Jean-Christophe... at91: add at91sam9261 chip register definition
2011-04-09 Jean-Christophe... jlink: jlink_debug_buffer use inline function when...
2011-04-08 Ali LownBuffering for up to 64 bytes in USB Blaster.
2011-04-08 Ali LownAdd support for LED to USB Blaster code.
2011-04-06 Spencer Oliverbuild: correctly use AC_LANG_PROGRAM
2011-04-06 Michel JAOUENcortex_a : implement jtag console for cortex_a
2011-04-05 Drasko DRASKOVICAdded mips_ejtag_drscan_32_out() for optimization.
2011-04-05 Drasko DRASKOVICCorrected waiting on PrAcc in wait_for_pracc_rw()....
2011-04-05 Drasko DRASKOVICAdded correct endianess treatment for big endian target...
2011-04-02 Øyvind Harboepandaboard: use new -dbgbase option to workaround broke...
2011-04-01 Øyvind Harboecortex_a: delete dbgbase hack vestiges
2011-04-01 Michel JAOUENcortex_a: fix gaffe in first implementation of -dbgbase
2011-04-01 Øyvind HarboeMerge remote branch 'origin/master' into HEAD
2011-04-01 Øyvind Harboemips: fix gaffe in previous commit
next

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)