openocd.git
2015-04-14 Paul Fertserjtag/tcl: fix incorrect memcpy in jim_newtap_expected_id 62/2562/4
2015-04-14 Uwe Bonnesturtelizer2-revC: Tested with real hardware. 84/2584/4
2015-04-14 Nemui Trinomiuslpc2000: Removed cmd51_can_xxxxb variables. 07/2607/2
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC 2Go config 64/2564/3
2015-04-14 Patrick NoffkeAdded Atmel SAM4SA16C chip (chip ID 0x28a70ce0). 25/2625/2
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC1100 Boot Kit config 72/2472/5
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC1000 family target config 71/2471/5
2015-04-14 Andreas Färbertcl/board: Add Spansion SK-FM4-176L-S6E2CC config 70/2570/3
2015-04-14 Andreas Färbertcl/target: Add Spansion FM4 config 69/2569/2
2015-04-14 Ed Berosetstartup: Fixed measure_clk to return kHz instead of... 73/2573/6
2015-04-14 Ed Berosetem357: Corrected EM357 support including errata details 81/2581/3
2015-04-14 Uwe Kleine... Cortex-A: Don't flush the data/unified cache if MMU... 29/2429/2
2015-04-14 Evan HunterRTOS: Add logging to FreeRTOS and general RTOS 91/2391/5
2015-04-14 Paul Fertsertcl/interface/parport: default to sane value on non... 72/2572/2
2015-04-14 Paul Fertserjtag/core: honour SRST timings in SWD mode 91/2591/2
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4500 Relax Kit config 67/2567/3
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4200 Application Kit config 66/2566/3
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC4500 Application Kit configs 81/2481/4
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC4000 family config 80/2480/4
2015-04-14 Felipe Balbitcl: icepick: add icepick_d_set_coreid 24/2624/2
2015-04-14 Felipe Balbitarget: icepick: call icepick_c_setup 23/2623/2
2015-04-14 Felipe Balbitarget: icepick: switch over to icepick_c_router 22/2622/2
2015-04-14 Felipe Balbitcl: target: am437x: pass coreid 21/2621/2
2015-04-14 Felipe Balbitarget: am437x: use more descriptive names 20/2620/2
2015-04-14 Felipe Balbitarget: am437x: fix DebugSS DAP ID 19/2619/2
2015-04-14 Felipe Balbitcl: board: add AM437x IDK support 17/2617/3
2015-04-14 Felipe Balbitcl: am437x: add reset-init event handler 16/2616/3
2015-04-14 Felipe Balbitcl: am437x: disable watchdog on reset-end 15/2615/3
2015-04-14 Felipe Balbitcl: am437x: define registers to be used later 14/2614/3
2015-04-14 Felipe Balbitcl: board: ti_am43xx_evm: follow xds100v2 requirements 13/2613/3
2015-04-14 Felipe Balbitcl: board: ti_am437x_evm: select jtag transport 12/2612/2
2015-04-14 Felipe Balbitcl: target: am437x: use entire SRAM area 11/2611/2
2015-04-14 Felipe Balbitcl: target: am437x.cfg: pass correct dbgbase 02/2602/2
2015-04-01 DmitryShpaktarget/target.c: fixed rp check bug in asynchronous... 57/2657/2
2015-03-25 Mateusz Manowieckijtag/drivers/ftdi.c: removed memory leak 63/2563/3
2015-03-25 Marian Cingeldoc: update RTOS section, add 'mqx' info 92/2592/2
2015-03-25 Uwe BonnesAdd configuration for EFM32 Gecko boards with Segger... 85/2585/4
2015-03-25 Mahavir Jainflash/nor: mrvlqspi: fix printf formatting issues 77/2577/2
2015-03-25 Angus Grattontransport: make 'transport select' auto-select the... 51/2551/7
2015-03-25 Paul Fertsertarget/adi_v5_swd, cortex_m: properly handle more cases... 96/2596/5
2015-03-25 Paul Fertserdrivers/cmsis-dap: port to common SWD framework 56/2356/9
2015-03-25 Paul Fertsertcl/board/twr-k60f120m: remove useless flash bank 0... 95/2595/3
2015-03-25 Paul Fertserflash/nor/kinetis: do not attempt mass-erase in place... 94/2594/3
2015-03-25 Paul Fertserarmv7m_trace, stlink: provide APIs to capture trace... 40/2540/13
2015-03-25 Paul Fertserarmv7m: add generic trace support (TPIU, ITM, etc.) 38/2538/14
2015-03-10 Uwe Bonnesstm32l1.cfg: Add missing dash to fix f7394049d3 commit. 90/2590/3
2015-03-09 Andreas Fritiofsontcl: Add default hooks for STM32F3x 96/2196/5
2015-03-09 Paul Fertserflash/nor/stellaris: allow to recover a locked device... 52/2552/2
2015-03-09 Andreas Färberjlink: Add variant "J-Link Lite-XMC4000" 68/2568/2
2015-03-09 Andreas Färberjlink: Add variant "J-Link Lite-XMC4200" 65/2565/3
2015-03-09 Paul Fertserserver, target, cortex_m: add deinit_target to the... 44/2544/5
2015-03-09 Paul Fertsertarget/target: call event handlers around examine when... 36/2536/6
2015-03-09 Paul Fertserhla/hla_interface: call HLA layout API close() on quit 43/2543/5
2015-03-09 Paul Fertsertarget/cortex_m: do not leak memory on reexamination 42/2542/5
2015-03-09 Paul Fertsertarget: fix timer callbacks processing 41/2541/3
2015-03-09 Paul Fertserarm11: initialise DPM and register cache before reading... 43/2043/2
2015-03-09 Paul Fertserstlink: avoid null pointer dereference in stlink_usb_cl... 50/2550/5
2015-03-09 Franck Jullienopenrisc: add profiling function 94/2494/2
2015-03-09 Paul Fertserarmv7m: do not access FPU registers when not present 16/2516/4
2015-03-09 Paul Fertserarmv7m: add FPU registers support 14/514/20
2015-03-09 Paul Fertserjimtcl: update to 0.76 release version 22/2522/2
2015-03-09 pierre Kuotarget/arm_disassembler: add exception related disassembly 48/2548/3
2015-03-09 Paul Fertsertarget/cortex_a: remove dead assignment 61/2561/2
2015-03-09 Paul Fertserflash/nor/stellaris: remove dead assignment 60/2560/2
2015-03-09 Paul Fertserflash/nor/sim3x: remove dead assignment 59/2559/2
2015-03-09 Paul Fertsercontrib/itmdump: fix UB in show_swit, and few compile... 33/2533/2
2015-03-09 Karl Palssoncontrib: itmdump: fix incorrect format printf 49/2449/3
2015-03-09 Austin Mortonserver: tcl_notifications command 36/2336/8
2015-03-09 Marian Cingelrtos: Freescale MQX rtos support 53/2353/9
2015-03-09 Matthijs van... tcl/interface/ftdi/xdsv2: fix and clarify EMU* signals 31/2231/3
2015-03-09 Uwe Bonnesstm32l1.cfg: Add ID Code of Cat.2 devices. 17/2517/4
2015-03-09 Uwe Bonnesstm32f3x.cfg: Remove duplicate item. 54/2554/3
2015-03-09 Nemui Trinomiuslpc2000: Add LPC407x/8x flash size auto detection 55/2555/2
2015-03-09 Olivier Esveratmega: add support for the at90usb128 flash 57/2557/2
2015-03-09 Mateusz ManowieckiAdded system signal handling to Linux version 43/2443/3
2015-03-09 Mateusz Manowieckijtag/drivers/buspirate: add JTAG_STABLECLOCKS cmd 96/2496/2
2015-03-09 Arne Wichmanntarget & board: AT91SAM7A2 and Olimex SAM7-LA2 18/2318/5
2015-02-28 Tomas Vanekpsoc4 flash driver: cleaned printf PRI... formats 58/2558/3
2015-02-24 Theodore A... nrf51: Update known devices table. 14/2514/2
2015-02-24 dmitry pervushinflash/nor/spi: add GigaDevice SPI flash 30/2530/2
2015-02-22 Paul Fertsercfg: add board and target configs for TI SimpleLink... 65/2465/6
2015-02-22 Uwe BonnesProvide genuine F3 nucleo config and source it for... 34/2434/3
2015-02-22 Oleksij Rempeltcl/target|board: add configs for Alphascale asm9260t 15/2515/3
2015-02-22 Robert P. J... Remove long-deprecated "target count" and "target numbe... 60/1860/4
2015-02-22 Andreas Fritiofsoncfg: Fix Kinetis kwikstik/kx config 27/2227/3
2015-02-22 Jean-Christian... Add SWD protocol support to sysfsgpio 38/2438/6
2015-02-22 Jean-Christian... Add SWD protocol support to bitbang 37/2437/4
2015-02-22 Matej Kupljengdb_server: ignore stray + in ACK mode 45/2545/3
2015-02-22 Uwe Bonnes cortex_m: Add Cortex-M0 identification to ROM-table... 49/2549/2
2015-02-22 Christopher... Cortex A: fix extra memory read and non-word sizes 81/2381/15
2015-02-12 Paul Fertserdoc: stellaris driver supports Tiva C too 09/2509/2
2015-02-12 Paul Fertserflash/nor/stm32lx: add all the IDs and revisions from... 95/2495/3
2015-02-12 Paul FertserREADME, doc: add mrvlqspi flash driver information 10/2510/3
2015-02-12 Paul Fertserdoc, README: mention all the variants supported by... 08/2508/3
2015-02-11 Andrej Kazminflash/nor/at91samd: add small delay before checking... 68/2268/3
2015-02-11 Paul Fertserflash/startup: extend "program" command to accept ... 92/2492/3
2015-02-11 Paul Fertserserver: shutdown command should lead to exit without... 11/2511/2
2015-02-11 Andreas Fritiofsontarget/profiling: Use the correct method to access... 79/2479/2
2015-02-11 Andreas Fritiofsonxscale: Use the correct method to access registers 78/2478/2
2015-02-11 Andreas Fritiofsonhla_target: Use the correct method to access registers 77/2477/2
next

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)