openocd.git
2007-11-23 ntfreak- added support for Hitex STM32 Performance Stick
2007-11-21 ntfreak- reset_run now works as expected on cortex-m3
2007-10-26 ntfreak- corrected str91x bank1 programming issues
2007-10-22 ntfreak- add verify_image command
2007-10-08 ntfreak- cleaned up str7, str9 and stm32 flash drivers
2007-10-01 ntfreak- flash autoerase <on|off> cmd added, default is off...
2007-09-10 mlu- Fixed display of sector sizes in flash.c
2007-09-10 mlu- added ft2232_latency command
2007-09-05 drathPatch by Michael Schwingen that
2007-08-25 drath- added support for setting JTAG frequency on ASIX...
2007-08-21 drath- correctly initialize start address for XScale trace...
2007-08-20 mlu- Support for AT91SAM7xx512 chips
2007-08-20 mlu- Support for AT91SAM7xx512 chips
2007-08-20 drath- update file size when writing to a fileio
2007-08-17 drath- renamed "xscale dump_trace_buffer" to "xscale dump_tr...
2007-08-16 drath- update jtag_speed setting when changing it during...
2007-08-16 drath- fixed several bugs in flash writing code (thanks...
2007-08-14 drath- corrected automake script
2007-08-14 drath- reworked presto.c to allow use of either FTD2XX or...
2007-08-13 ntfreak- fix build issues when not using autoconf/automake...
2007-08-10 drath- bumped version information
2007-08-10 drath- changed mingw host detection to *-mingw instead of...
2007-08-10 drath- renamed M5960 USB JTAG to "flyswatter"
2007-08-09 mlu- trying to remove a breakpoint with target running...
2007-07-31 drath- cleaned up cycle counting in ETM analysis
2007-07-31 drath- add missing configure.in change from last checkin
2007-07-31 drath- calculate cycles since last executed instruction...
2007-07-31 ntfreak- motorola s19 file loader added
2007-07-26 ntfreak- corrected stm32x_handle_options_write_command, incorr...
2007-07-26 drath- restrict direct parallel port access to x86 platforms...
2007-07-26 drath- documentation fixes (thanks to Uwe Hermann)
2007-07-25 drath- reformat src/jtag/bitq.c (thanks to Pavel Chromy)
2007-07-15 drath- added support for Asix Presto JTAG interface (thanks...
2007-06-28 drath- fixed endianness helper macros (thanks to obilix...
2007-06-24 ntfreak- ST STM32x cortex support added
2007-06-21 drath- added support for Intel/Marvel PXA27x (XScale) targets
2007-06-16 ntfreak- str9xpec driver was using stricmp, changed to strcmp...
2007-06-16 ntfreak- added mingw elf patches from Vincent Palatin
2007-06-15 drath- added support for pseudo image type "mem", currently...
2007-06-14 mluAdded patch for Luminar Micors Fury class devices ...
2007-06-14 drath- added stellaris.[ch] missing from Cortex-M3 merge
2007-06-14 drath- merged support for Cortex-M3 from cortex-m3 branch...
2007-06-14 drath- added manpage for OpenOCD (thanks to Uwe Hermann)
2007-05-31 drath- add support for ELF images (thanks to Vincent Palatin...
2007-05-30 drath- reworked image handling to support multiple sections...
2007-05-29 drath- add missing file src/target/trace.h
2007-05-29 drath- add missing image handling files
2007-05-29 drath- split fileio handling into fileio part and image...
2007-05-10 ntfreak-- corrected embedded ice definitions
2007-05-05 drath- further work on ETB decoding (not yet functional)
2007-04-28 ntfreak- added support for Hitex comstick.
2007-04-26 drath- improved ETB trace output
2007-04-25 drath- added support for error handlers to JTAG scan command...
2007-04-16 drath- explicitly disable monitor mode on ARM7/9 targets
2007-04-16 drath- allow multiple USB vendor and product ids when search...
2007-04-12 drath- correctly mask out bits that aren't part of a copied...
2007-04-11 drath- disabled excessive debug output in jtag.h
2007-03-30 drath- added support for Turtelizer 2 (USB JTAG interface...
2007-03-29 drath- added "arm9tdmi vector_catch ['all'|'none'|'vec1...
2007-03-28 drath- merged XScale branch back into trunk
2007-03-26 drath- fixed arm926 cp15 command bug (thanks to Vincent...
2007-03-16 drath- added missing files for last commit
2007-03-15 drath- reworked file i/o. every fileaccess (target, flash...
2007-02-20 drath- fixed libftdi initialization
2007-02-03 drath- add missing parentheses around macro parameters ...
2007-01-31 drath- merged several changes from XScale
2007-01-26 drath- disabled use of single-step bit for EmbeddedICE versi...
2007-01-25 drath- disabled JTAG debug output
2007-01-25 drath- Added support for ARM926EJ-S based cores
2007-01-22 drath- fix incorrect parsing of whitespace in command.c...
2007-01-18 ntfreak- added support for ST flashlink cable
2007-01-09 drath- disabled FT2232 debug output (that code should be...
2006-11-22 drath- checked in missing configure.in changes for GW16012...
2006-11-22 drath- added a PLD (programmable logic device) subsystem...
2006-11-07 drath- added support for the oocd-link (joernonline.de/dw...
2006-11-05 drath- correctly enter debug state on a "soft_reset_halt...
2006-10-23 drath- several small fixes (thanks to Magnus Lundin and...
2006-10-19 drath- fixed endianness handling in arm7_9_read_core_reg...
2006-10-12 drath- allow FT2232 devices to be opened by serial number...
2006-10-06 drath- added support for American Microsystem's M5960 (FT223...
2006-10-03 drath- fixed regression in gdb_server.c (Thanks to Michael...
2006-09-28 drath- str9x flash support (Thanks to Spencer Oliver)
2006-09-12 drath- allow writes to second flash bank on STR71x devices...
2006-09-09 drath- set the T bit in the CPSR when the core was executing...
2006-09-07 drath- free working area used to store flash write buffer
2006-09-07 drath- integrated patch from Magnus Lundin that fixes at91sa...
2006-09-04 drath- added debug output for D/I FSR and FAR (arm920t)
2006-08-31 drath- made lpc2000 code endianness safe (support big-endian...
2006-08-31 drath- added missing AT91RM9200 files
2006-08-31 drath- endianess fixes everywhere but in the flash code...
2006-08-20 drath- made bp command more verbose
2006-08-17 drath- updated version info in openocd.c
2006-08-17 drath- renamed jtag_interface_t.support_statemove to jtag_in...
2006-08-14 drath- fixed bug in .cfg files. Thanks to Michael Fischer...
2006-08-14 drath- updated configuration examples, installation instruct...
2006-08-14 drath- added support for the Signalyzer USB->JTAG dongle...
2006-08-11 drath- added support for FreeBSD ppi (parallel port access...
2006-08-06 drath- fixed jtag_n[st]rst_delay. time is now miliseconds...
2006-08-06 drath- fixed a minor problem with the GDB server that could...
2006-08-01 drath- allow building for MinGW using either -mno-cygwin...
next

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)