openocd.git
2015-04-14 Felipe Balbitcl: am437x: disable watchdog on reset-end 15/2615/3
2015-04-14 Felipe Balbitcl: am437x: define registers to be used later 14/2614/3
2015-04-14 Felipe Balbitcl: board: ti_am43xx_evm: follow xds100v2 requirements 13/2613/3
2015-04-14 Felipe Balbitcl: board: ti_am437x_evm: select jtag transport 12/2612/2
2015-04-14 Felipe Balbitcl: target: am437x: use entire SRAM area 11/2611/2
2015-04-14 Felipe Balbitcl: target: am437x.cfg: pass correct dbgbase 02/2602/2
2015-04-01 DmitryShpaktarget/target.c: fixed rp check bug in asynchronous... 57/2657/2
2015-03-25 Mateusz Manowieckijtag/drivers/ftdi.c: removed memory leak 63/2563/3
2015-03-25 Marian Cingeldoc: update RTOS section, add 'mqx' info 92/2592/2
2015-03-25 Uwe BonnesAdd configuration for EFM32 Gecko boards with Segger... 85/2585/4
2015-03-25 Mahavir Jainflash/nor: mrvlqspi: fix printf formatting issues 77/2577/2
2015-03-25 Angus Grattontransport: make 'transport select' auto-select the... 51/2551/7
2015-03-25 Paul Fertsertarget/adi_v5_swd, cortex_m: properly handle more cases... 96/2596/5
2015-03-25 Paul Fertserdrivers/cmsis-dap: port to common SWD framework 56/2356/9
2015-03-25 Paul Fertsertcl/board/twr-k60f120m: remove useless flash bank 0... 95/2595/3
2015-03-25 Paul Fertserflash/nor/kinetis: do not attempt mass-erase in place... 94/2594/3
2015-03-25 Paul Fertserarmv7m_trace, stlink: provide APIs to capture trace... 40/2540/13
2015-03-25 Paul Fertserarmv7m: add generic trace support (TPIU, ITM, etc.) 38/2538/14
2015-03-10 Uwe Bonnesstm32l1.cfg: Add missing dash to fix f7394049d3 commit. 90/2590/3
2015-03-09 Andreas Fritiofsontcl: Add default hooks for STM32F3x 96/2196/5
2015-03-09 Paul Fertserflash/nor/stellaris: allow to recover a locked device... 52/2552/2
2015-03-09 Andreas Färberjlink: Add variant "J-Link Lite-XMC4000" 68/2568/2
2015-03-09 Andreas Färberjlink: Add variant "J-Link Lite-XMC4200" 65/2565/3
2015-03-09 Paul Fertserserver, target, cortex_m: add deinit_target to the... 44/2544/5
2015-03-09 Paul Fertsertarget/target: call event handlers around examine when... 36/2536/6
2015-03-09 Paul Fertserhla/hla_interface: call HLA layout API close() on quit 43/2543/5
2015-03-09 Paul Fertsertarget/cortex_m: do not leak memory on reexamination 42/2542/5
2015-03-09 Paul Fertsertarget: fix timer callbacks processing 41/2541/3
2015-03-09 Paul Fertserarm11: initialise DPM and register cache before reading... 43/2043/2
2015-03-09 Paul Fertserstlink: avoid null pointer dereference in stlink_usb_cl... 50/2550/5
2015-03-09 Franck Jullienopenrisc: add profiling function 94/2494/2
2015-03-09 Paul Fertserarmv7m: do not access FPU registers when not present 16/2516/4
2015-03-09 Paul Fertserarmv7m: add FPU registers support 14/514/20
2015-03-09 Paul Fertserjimtcl: update to 0.76 release version 22/2522/2
2015-03-09 pierre Kuotarget/arm_disassembler: add exception related disassembly 48/2548/3
2015-03-09 Paul Fertsertarget/cortex_a: remove dead assignment 61/2561/2
2015-03-09 Paul Fertserflash/nor/stellaris: remove dead assignment 60/2560/2
2015-03-09 Paul Fertserflash/nor/sim3x: remove dead assignment 59/2559/2
2015-03-09 Paul Fertsercontrib/itmdump: fix UB in show_swit, and few compile... 33/2533/2
2015-03-09 Karl Palssoncontrib: itmdump: fix incorrect format printf 49/2449/3
2015-03-09 Austin Mortonserver: tcl_notifications command 36/2336/8
2015-03-09 Marian Cingelrtos: Freescale MQX rtos support 53/2353/9
2015-03-09 Matthijs van... tcl/interface/ftdi/xdsv2: fix and clarify EMU* signals 31/2231/3
2015-03-09 Uwe Bonnesstm32l1.cfg: Add ID Code of Cat.2 devices. 17/2517/4
2015-03-09 Uwe Bonnesstm32f3x.cfg: Remove duplicate item. 54/2554/3
2015-03-09 Nemui Trinomiuslpc2000: Add LPC407x/8x flash size auto detection 55/2555/2
2015-03-09 Olivier Esveratmega: add support for the at90usb128 flash 57/2557/2
2015-03-09 Mateusz ManowieckiAdded system signal handling to Linux version 43/2443/3
2015-03-09 Mateusz Manowieckijtag/drivers/buspirate: add JTAG_STABLECLOCKS cmd 96/2496/2
2015-03-09 Arne Wichmanntarget & board: AT91SAM7A2 and Olimex SAM7-LA2 18/2318/5
2015-02-28 Tomas Vanekpsoc4 flash driver: cleaned printf PRI... formats 58/2558/3
2015-02-24 Theodore A... nrf51: Update known devices table. 14/2514/2
2015-02-24 dmitry pervushinflash/nor/spi: add GigaDevice SPI flash 30/2530/2
2015-02-22 Paul Fertsercfg: add board and target configs for TI SimpleLink... 65/2465/6
2015-02-22 Uwe BonnesProvide genuine F3 nucleo config and source it for... 34/2434/3
2015-02-22 Oleksij Rempeltcl/target|board: add configs for Alphascale asm9260t 15/2515/3
2015-02-22 Robert P. J... Remove long-deprecated "target count" and "target numbe... 60/1860/4
2015-02-22 Andreas Fritiofsoncfg: Fix Kinetis kwikstik/kx config 27/2227/3
2015-02-22 Jean-Christian... Add SWD protocol support to sysfsgpio 38/2438/6
2015-02-22 Jean-Christian... Add SWD protocol support to bitbang 37/2437/4
2015-02-22 Matej Kupljengdb_server: ignore stray + in ACK mode 45/2545/3
2015-02-22 Uwe Bonnes cortex_m: Add Cortex-M0 identification to ROM-table... 49/2549/2
2015-02-22 Christopher... Cortex A: fix extra memory read and non-word sizes 81/2381/15
2015-02-12 Paul Fertserdoc: stellaris driver supports Tiva C too 09/2509/2
2015-02-12 Paul Fertserflash/nor/stm32lx: add all the IDs and revisions from... 95/2495/3
2015-02-12 Paul FertserREADME, doc: add mrvlqspi flash driver information 10/2510/3
2015-02-12 Paul Fertserdoc, README: mention all the variants supported by... 08/2508/3
2015-02-11 Andrej Kazminflash/nor/at91samd: add small delay before checking... 68/2268/3
2015-02-11 Paul Fertserflash/startup: extend "program" command to accept ... 92/2492/3
2015-02-11 Paul Fertserserver: shutdown command should lead to exit without... 11/2511/2
2015-02-11 Andreas Fritiofsontarget/profiling: Use the correct method to access... 79/2479/2
2015-02-11 Andreas Fritiofsonxscale: Use the correct method to access registers 78/2478/2
2015-02-11 Andreas Fritiofsonhla_target: Use the correct method to access registers 77/2477/2
2015-02-11 Andreas Fritiofsoncortex_m: Use the correct method to access registers 76/2476/2
2015-02-11 Andreas Fritiofsonnds32: Use the correct method to access registers 75/2475/3
2015-02-11 Antony Pavlovmips32: add gdb target description support 72/1972/9
2015-02-11 Antony Pavlovmips32: use 'unsigned int' for CPU register indices 16/2216/5
2015-02-11 Anton Kuzmintcl/interface/ftdi: correct LED config for BusBlaster... 39/2539/2
2015-02-11 Andreas Bomholtzsim3x: new flash driver for Silabs SiM3 microcontroller... 78/2078/19
2015-02-11 Angus Grattonnrf51 - Add async loader. Performance on nrf51822QAA... 04/2204/12
2015-02-11 Daniel Glöcknerarmv7a: fix interpretation of MMU table 86/2386/2
2015-02-11 Joerg FischerJ-Link serial number config option 21/2521/3
2015-02-11 Olivier Schonkencortex_a: Add Cortex-A5 identification 83/2483/2
2015-02-11 Paul FertserREADME: mention "transport select" in quickstart section 12/2512/2
2015-02-11 Paul Fertsertarget/image: fix undefined behaviour when loading... 24/2524/2
2015-02-11 Paul Fertserdoc: document the OCL (on chip flash loader) driver 29/2529/2
2015-02-11 Oleksij Rempeltcl: add TP-LINK TL-MR3020 to the firmware recovery... 20/2520/6
2015-02-11 Oleksij Rempeltcl/target|board: add config Atheros ar9331 19/2519/5
2015-02-11 Jose de Sousatarget: write gmon.out according to target endianness 68/2168/4
2015-02-11 Pawel Simini51: support for Nuvoton NuMicro M051 series flash... 26/2426/3
2015-02-11 Jacob Palssontcl/target: add CC2538 and CC26xx target files (with... 32/2232/5
2015-02-11 Ed Berosetem357: added target files for em357 and em358 70/2470/8
2015-02-11 Nemui Trinomiusjlink: Added hardware version number for JLink firmware... 98/2298/4
2015-02-11 Heinz Schweigercfg: TI Tiva C dk-tm4c129x Evaluation Kits 67/1867/6
2015-02-11 Michael Brownlpc2000: add chip IDs for LPC11U6x/LPC11E6x 63/2463/2
2015-02-11 Tomas Vanekpsoc4: support for Cypress PSoC 41xx/42xx family 82/2282/6
2015-02-04 Jussi Kivilinnastm32lx: do not attempt mass-erase in-place of first... 41/2441/7
2015-02-04 Paul Fertserflash/nor/stm32lx: use 0 base to autodetect second... 03/2503/2
2015-02-04 Paul Fertserdoc: add stm32lx mass_erase description 02/2502/2
2015-02-04 Paul Fertserflash/nor/stm32l: unify waiting for busy flag functions 91/2491/3
next

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)