openocd.git
2015-09-30 Philipp Wagnertcl_server: Support line buffers up to 4M (v3) 37/2837/4
2015-09-28 Austin Mortonserver: remove connection limit from tcl and telnet... 37/2937/2
2015-09-05 Austin Mortonserver: tcl_trace command 88/2588/7
2015-08-19 Alamy Liuflash/nor/jtagspi: 'retval' may be used uninitialized 05/2905/4
2015-08-06 Paul Fertsersvf: flush the queue before reallocing memory 99/2899/2
2015-08-06 Evan Hunterflash : Add support for Atmel at91sam4sa16b 78/2878/2
2015-08-06 Evan Huntergdb_server: Add check for malloc fail 71/2871/2
2015-08-06 Christoph Pittracherbcm2835gpio: Add SWD support, Raspberry Pi 2 support. 02/2802/3
2015-08-06 Andrey Yurovskyat91samd: add chip IDs for SAMC20 and SAMC21 families 09/2809/3
2015-08-06 Paul Fertsersim3x: fix build failure with clang 3.6 38/2838/2
2015-08-06 Robert Jordenskc705: digilent-jtag/kintex7/jtagspi board 61/2861/15
2015-08-06 Robert Jordenspipistrello: ftdi-jtag/spartan6/jtagspi board 46/2846/19
2015-08-06 Robert Jordensflash/nor/jtagspi: add JTAGSPI driver 44/2844/13
2015-08-06 Robert Jordensflash/nor/tcl: add read_bank and verify_bank 42/2842/8
2015-08-06 Robert Jordenscpld/virtex2: allow JSTART to be disabled 60/2860/3
2015-08-06 Robert Jordensflash/nor/spi: add micron/numonyx n25q128 41/2841/6
2015-08-06 Robert Jordenstarget/testee: manage target->state 40/2840/5
2015-08-06 Andreas Färbertcl/board: Add EmCraft VF6 SOM and baseboard configs 67/2767/3
2015-08-06 Andreas Färbertcl/target: Add Freescale Vybrid VF6xx config 66/2766/2
2015-08-06 Kyle Mannajlink: Add on-board nRF51-DK USB VID and PID 75/2775/2
2015-08-06 Kyle Mannaudev: Add J-Link on-board nRF51-DK 74/2774/2
2015-08-06 Radek Dostaltcl: replace $TARGETNAME with $_TARGETNAME 79/2779/2
2015-08-06 Alexander DrozdovRTOS: ThreadX support on ARM926E-JS 48/2848/2
2015-08-06 Karl Palssontarget: check memory handlers before use for all types 91/2791/3
2015-06-30 Paul Fertsermanual: make it compatible with ancient texinfo version... 81/2781/2
2015-05-17 Paul FertserRestore normal development cycle
2015-05-17 Paul FertserThe openocd-0.9.0 release v0.9.0
2015-05-17 Paul FertserNEWS: last pre-release changes 76/2776/2
2015-05-17 Paul Fertserjtag/drivers/stlink: fix SRST issue with stlink-v1 61/2761/2
2015-05-17 Vincent Palatinpsoc4: add support for Cypress CCG1 family 57/2757/4
2015-05-17 Peter A. Bigotnrf51: refine and extend known devices table 93/2593/3
2015-05-17 Karl Palssondocs: gdb_target_description defaults enabled 64/2764/2
2015-05-17 Austin Mortonserver: avoid the tcl server crashing when there is... 59/2759/4
2015-05-17 Paul Fertsermanual: add missing usb blaster commands 72/2772/2
2015-05-17 Paul Fertsermanual: fix usb_blaster_pin command syntax and description 71/2771/2
2015-05-17 Paul FertserREADME.Windows: clarify the kernel drivers installation 06/2506/3
2015-05-17 Paul Fertsermanual: reorder flash driver info 70/2770/2
2015-05-17 Paul Fertsermanual: fix all overfull and underfull hboxes 69/2769/2
2015-05-17 Paul Fertsermanual: remove the lists of config files 68/2768/2
2015-04-24 Paul FertserRestore -dev suffix
2015-04-24 Paul FertserThe openocd-0.9.0-rc1 release candidate v0.9.0-rc1
2015-04-24 Paul FertserAdd NEWS in preparation for the new release 01/2701/5
2015-04-24 Paul Fertserjtag/drivers/ti_icdi: do not segfault when adapter... 42/2742/2
2015-04-24 Andreas Färberxmc4500-application-kit-general: Drop srst_nogate 27/2727/2
2015-04-24 Jiri Kastnertarget/ti_tms570.cfg: added several JTAG IDs for TMS570... 23/2123/8
2015-04-24 Alex RayTI TMS570 USB Kit board config 89/2089/5
2015-04-24 Paul Fertserrtos/mqx: prevent crash with -rtos auto 41/2741/3
2015-04-24 Paul Fertsertarget/cortex_a: examination should be done every time... 23/2723/2
2015-04-24 Paul Fertsertarget: try to reexamine even when polling fails 21/2721/2
2015-04-24 Paul Fertserrtos: fix print format specifiers 24/2724/2
2015-04-16 Simon Qianconfigure the SWD frequency when setting adapter speed... 08/2608/2
2015-04-16 Andrey Yurovskyflash: at91samd: add SAML21 support, fix part ID issue 90/2690/2
2015-04-16 Uwe Bonnesstlink_usb.c: Decode some more errors. 06/2706/2
2015-04-16 Paul Fertserflash/nor/mdr: add docs, remove memory leak on probe() 94/2694/2
2015-04-16 Marc Schinkflash: efm32: Add support for EZR32LG and EZR32WG. 00/2700/2
2015-04-16 Spencer Oliverdocs: update OpenOCD url's to openocd.org domain 98/2698/2
2015-04-16 Spencer Olivercmsis-dap: print vendor and product id on open failure 08/2708/2
2015-04-16 Mahavir Jaindoc/openocd.texi: fix formatting for mrvlqspi driver... 05/2705/2
2015-04-16 Paul Fertsertcl/target/stm32f3: fix reset init for stlink 02/2702/5
2015-04-16 Paul Fertsercontrib/itmdump: add a hack to allow direct dumping... 37/2537/7
2015-04-16 Paul FertserFix several format specifiers errors exposed by arm... 19/2719/2
2015-04-16 Felipe Balbiboard: ti_am43xx_evm: remove xds100v2 interface 18/2618/4
2015-04-16 Andreas Fritiofsonrtos: add instructions and helper code to make FreeRTOS... 47/2347/4
2015-04-16 Andreas FritiofsonFreeRTOS: Make optional symbols optional 25/2425/4
2015-04-14 Tomas VanekAT91SAM4L: handle reset run/halt in SMAP 04/2604/5
2015-04-14 Paul Fertsertarget/arm_adi_v5, cortex_m: retry ahbap_debugport_init... 01/2601/4
2015-04-14 Paul Fertsertarget/cortex_a: emit a clear error message when dbgbas... 03/2603/4
2015-04-14 Paul Fertserflash/nor/lpc2000: free allocated working area when... 96/2696/2
2015-04-14 Paul Fertserjtag/adi_v5_jtag: fix infinite recursion in jtagdp_tran... 97/2697/2
2015-04-14 Paul Fertserflash/nor/lpc2000: properly free working area used... 95/2695/2
2015-04-14 Paul Fertserjtag/startup.tcl: fix regression with autoselecting... 93/2693/3
2015-04-14 Richard BraunChibiOS: fix crash on auto detection 97/2597/2
2015-04-14 Paul FertserTcl exception codes cleanup, shutdown command amendments 00/2600/4
2015-04-14 Juha Niskanenhelper: shutdown command should return with 0 exit... 89/2589/2
2015-04-14 Paul Fertserjtag/tcl: fix incorrect memcpy in jim_newtap_expected_id 62/2562/4
2015-04-14 Uwe Bonnesturtelizer2-revC: Tested with real hardware. 84/2584/4
2015-04-14 Nemui Trinomiuslpc2000: Removed cmd51_can_xxxxb variables. 07/2607/2
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC 2Go config 64/2564/3
2015-04-14 Patrick NoffkeAdded Atmel SAM4SA16C chip (chip ID 0x28a70ce0). 25/2625/2
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC1100 Boot Kit config 72/2472/5
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC1000 family target config 71/2471/5
2015-04-14 Andreas Färbertcl/board: Add Spansion SK-FM4-176L-S6E2CC config 70/2570/3
2015-04-14 Andreas Färbertcl/target: Add Spansion FM4 config 69/2569/2
2015-04-14 Ed Berosetstartup: Fixed measure_clk to return kHz instead of... 73/2573/6
2015-04-14 Ed Berosetem357: Corrected EM357 support including errata details 81/2581/3
2015-04-14 Uwe Kleine... Cortex-A: Don't flush the data/unified cache if MMU... 29/2429/2
2015-04-14 Evan HunterRTOS: Add logging to FreeRTOS and general RTOS 91/2391/5
2015-04-14 Paul Fertsertcl/interface/parport: default to sane value on non... 72/2572/2
2015-04-14 Paul Fertserjtag/core: honour SRST timings in SWD mode 91/2591/2
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4500 Relax Kit config 67/2567/3
2015-04-14 Jeff Ciesielskitcl/board: Add Infineon XMC4200 Application Kit config 66/2566/3
2015-04-14 Andreas Färbertcl/board: Add Infineon XMC4500 Application Kit configs 81/2481/4
2015-04-14 Andreas Färbertcl/target: Add Infineon XMC4000 family config 80/2480/4
2015-04-14 Felipe Balbitcl: icepick: add icepick_d_set_coreid 24/2624/2
2015-04-14 Felipe Balbitarget: icepick: call icepick_c_setup 23/2623/2
2015-04-14 Felipe Balbitarget: icepick: switch over to icepick_c_router 22/2622/2
2015-04-14 Felipe Balbitcl: target: am437x: pass coreid 21/2621/2
2015-04-14 Felipe Balbitarget: am437x: use more descriptive names 20/2620/2
2015-04-14 Felipe Balbitarget: am437x: fix DebugSS DAP ID 19/2619/2
2015-04-14 Felipe Balbitcl: board: add AM437x IDK support 17/2617/3
next

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)