2 * Copyright (C) 2005 by Dominic Rath
5 * Copyright (C) 2008 by Spencer Oliver
8 * Copyright (C) 2009 by Øyvind Harboe
9 * oyvind.harboe@zylin.com
11 * Copyright (C) 2018 by Liviu Ionescu
14 * This program is free software; you can redistribute it and/or modify
15 * it under the terms of the GNU General Public License as published by
16 * the Free Software Foundation; either version 2 of the License, or
17 * (at your option) any later version.
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
24 * You should have received a copy of the GNU General Public License
25 * along with this program. If not, see <http://www.gnu.org/licenses/>.
28 #ifndef OPENOCD_TARGET_ARM_H
29 #define OPENOCD_TARGET_ARM_H
31 #include <helper/command.h>
36 * Holds the interface to ARM cores.
38 * At this writing, only "classic ARM" cores built on the ARMv4 register
39 * and mode model are supported. The Thumb2-only microcontroller profile
40 * support has not yet been integrated, affecting Cortex-M parts.
44 * Indicates what registers are in the ARM state core register set.
46 * - ARM_CORE_TYPE_STD indicates the standard set of 37 registers, seen
47 * on for example ARM7TDMI cores.
48 * - ARM_CORE_TYPE_SEC_EXT indicates core has security extensions, thus
49 * three more registers are shadowed for "Secure Monitor" mode.
50 * - ARM_CORE_TYPE_M_PROFILE indicates a microcontroller profile core,
51 * which only shadows SP.
54 ARM_CORE_TYPE_STD
= -1,
55 ARM_CORE_TYPE_SEC_EXT
= 1,
56 ARM_CORE_TYPE_M_PROFILE
,
60 * Represent state of an ARM core.
62 * Most numbers match the five low bits of the *PSR registers on
63 * "classic ARM" processors, which build on the ARMv4 processor
64 * modes and register set.
66 * ARM_MODE_ANY is a magic value, often used as a wildcard.
68 * Only the microcontroller cores (ARMv6-M, ARMv7-M) support ARM_MODE_THREAD,
69 * ARM_MODE_USER_THREAD, and ARM_MODE_HANDLER. Those are the only modes
80 ARM_MODE_1176_MON
= 28,
84 ARM_MODE_USER_THREAD
= 1,
98 /* VFPv3 internal register numbers mapping to d0:31 */
135 const char *arm_mode_name(unsigned psr_mode
);
136 bool is_arm_mode(unsigned psr_mode
);
138 /** The PSR "T" and "J" bits define the mode of "classic ARM" cores. */
147 /** ARM vector floating point enabled, if yes which version. */
148 enum arm_vfp_version
{
155 #define ARM_COMMON_MAGIC 0x0A450A45
158 * Represents a generic ARM core, with standard application registers.
160 * There are sixteen application registers (including PC, SP, LR) and a PSR.
161 * Cortex-M series cores do not support as many core states or shadowed
162 * registers as traditional ARM cores, and only support Thumb2 instructions.
166 struct reg_cache
*core_cache
;
168 /** Handle to the PC; valid in all core modes. */
171 /** Handle to the CPSR/xPSR; valid in all core modes. */
174 /** Handle to the SPSR; valid only in core modes with an SPSR. */
177 /** Support for arm_reg_current() */
180 /** Indicates what registers are in the ARM state core register set. */
181 enum arm_core_type core_type
;
183 /** Record the current core mode: SVC, USR, or some other mode. */
184 enum arm_mode core_mode
;
186 /** Record the current core state: ARM, Thumb, or otherwise. */
187 enum arm_state core_state
;
189 /** Flag reporting unavailability of the BKPT instruction. */
192 /** Flag reporting armv6m based core. */
195 /** Floating point or VFP version, 0 if disabled. */
198 int (*setup_semihosting
)(struct target
*target
, int enable
);
200 /** Backpointer to the target. */
201 struct target
*target
;
203 /** Handle for the debug module, if one is present. */
206 /** Handle for the Embedded Trace Module, if one is present. */
207 struct etm_context
*etm
;
209 /* FIXME all these methods should take "struct arm *" not target */
211 /** Retrieve all core registers, for display. */
212 int (*full_context
)(struct target
*target
);
214 /** Retrieve a single core register. */
215 int (*read_core_reg
)(struct target
*target
, struct reg
*reg
,
216 int num
, enum arm_mode mode
);
217 int (*write_core_reg
)(struct target
*target
, struct reg
*reg
,
218 int num
, enum arm_mode mode
, uint8_t *value
);
220 /** Read coprocessor register. */
221 int (*mrc
)(struct target
*target
, int cpnum
,
222 uint32_t op1
, uint32_t op2
,
223 uint32_t CRn
, uint32_t CRm
,
226 /** Write coprocessor register. */
227 int (*mcr
)(struct target
*target
, int cpnum
,
228 uint32_t op1
, uint32_t op2
,
229 uint32_t CRn
, uint32_t CRm
,
234 /** For targets conforming to ARM Debug Interface v5,
235 * this handle references the Debug Access Port (DAP)
236 * used to make requests to the target.
238 struct adiv5_dap
*dap
;
241 /** Convert target handle to generic ARM target state handle. */
242 static inline struct arm
*target_to_arm(struct target
*target
)
244 assert(target
!= NULL
);
245 return target
->arch_info
;
248 static inline bool is_arm(struct arm
*arm
)
251 return arm
->common_magic
== ARM_COMMON_MAGIC
;
254 struct arm_algorithm
{
257 enum arm_mode core_mode
;
258 enum arm_state core_state
;
264 struct target
*target
;
269 struct reg_cache
*arm_build_reg_cache(struct target
*target
, struct arm
*arm
);
270 struct reg_cache
*armv8_build_reg_cache(struct target
*target
);
272 extern const struct command_registration arm_command_handlers
[];
274 int arm_arch_state(struct target
*target
);
275 const char *arm_get_gdb_arch(struct target
*target
);
276 int arm_get_gdb_reg_list(struct target
*target
,
277 struct reg
**reg_list
[], int *reg_list_size
,
278 enum target_register_class reg_class
);
279 const char *armv8_get_gdb_arch(struct target
*target
);
280 int armv8_get_gdb_reg_list(struct target
*target
,
281 struct reg
**reg_list
[], int *reg_list_size
,
282 enum target_register_class reg_class
);
284 int arm_init_arch_info(struct target
*target
, struct arm
*arm
);
286 /* REVISIT rename this once it's usable by ARMv7-M */
287 int armv4_5_run_algorithm(struct target
*target
,
288 int num_mem_params
, struct mem_param
*mem_params
,
289 int num_reg_params
, struct reg_param
*reg_params
,
290 target_addr_t entry_point
, target_addr_t exit_point
,
291 int timeout_ms
, void *arch_info
);
292 int armv4_5_run_algorithm_inner(struct target
*target
,
293 int num_mem_params
, struct mem_param
*mem_params
,
294 int num_reg_params
, struct reg_param
*reg_params
,
295 uint32_t entry_point
, uint32_t exit_point
,
296 int timeout_ms
, void *arch_info
,
297 int (*run_it
)(struct target
*target
, uint32_t exit_point
,
298 int timeout_ms
, void *arch_info
));
300 int arm_checksum_memory(struct target
*target
,
301 target_addr_t address
, uint32_t count
, uint32_t *checksum
);
302 int arm_blank_check_memory(struct target
*target
,
303 struct target_memory_check_block
*blocks
, int num_blocks
, uint8_t erased_value
);
305 void arm_set_cpsr(struct arm
*arm
, uint32_t cpsr
);
306 struct reg
*arm_reg_current(struct arm
*arm
, unsigned regnum
);
307 struct reg
*armv8_reg_current(struct arm
*arm
, unsigned regnum
);
309 extern struct reg arm_gdb_dummy_fp_reg
;
310 extern struct reg arm_gdb_dummy_fps_reg
;
312 #endif /* OPENOCD_TARGET_ARM_H */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)