Martin Schmölzer [Wed, 31 Aug 2011 15:22:21 +0000 (17:22 +0200)]
ULINK driver: Remove typedefs in ulink.c
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Wed, 31 Aug 2011 14:51:41 +0000 (16:51 +0200)]
ULINK driver: Remove typedefs in OpenULINK firmware: Use typedefs from stdint.h (uint8_t, uint16_t) instead of custom typedefs in shorttypes.h (u8, u16, ...)
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Tue, 30 Aug 2011 22:20:35 +0000 (00:20 +0200)]
ULINK driver: Remove typedefs in OpenULINK firmware USB descriptor structures
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Rodrigo L. Rosa [Wed, 31 Aug 2011 22:43:11 +0000 (15:43 -0700)]
usleep to jtag_sleep
this will help avoid platform specific timing issues
Rodrigo L. Rosa [Wed, 31 Aug 2011 19:37:20 +0000 (12:37 -0700)]
static for some functions
made two functions into static, since they are not required by anything external
Rodrigo L. Rosa [Wed, 31 Aug 2011 19:32:14 +0000 (12:32 -0700)]
speed up, relocate function
added an attempt to use the non-reseting halting sequence. if it fails, then the full sequence will be attempted. this makes things a bit faster most of the time.
changed the location of a function, avoiding a forward def
Øyvind Harboe [Wed, 31 Aug 2011 14:27:09 +0000 (16:27 +0200)]
Merge branch 'dsp5680xx_cherry' of git://repo.or.cz/openocd/dsp568013 into fix
Martin Schmoelzer [Tue, 23 Aug 2011 15:22:53 +0000 (17:22 +0200)]
ULINK driver: Update firmware image to reflect the latest changes in source code.
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmoelzer [Thu, 4 Aug 2011 20:30:25 +0000 (22:30 +0200)]
ULINK driver: Add '-lm' linker flag when building this driver (required for correct calculation of JTAG TCK speed setting)
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmoelzer [Thu, 4 Aug 2011 17:03:59 +0000 (19:03 +0200)]
ULINK driver: Implement variable TCK frequency in OpenOCD driver
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 17:03:29 +0000 (19:03 +0200)]
ULINK driver: Implement variable TCK frequency in OpenULINK firmware
Also, speed up jtag_clock_tck() significantly (150 kHz -> 375 kHz)
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmoelzer [Tue, 23 Aug 2011 12:21:56 +0000 (14:21 +0200)]
ULINK driver: Fix whitespace in OpenULINK firmware usb.c module (trivial)
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmoelzer [Tue, 23 Aug 2011 14:53:03 +0000 (16:53 +0200)]
ULINK driver: Implement JTAG_PATHMOVE command
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 10:29:02 +0000 (12:29 +0200)]
ULINK driver: Implement JTAG_STABLECLOCKS command
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 17:50:46 +0000 (19:50 +0200)]
ULINK driver: Implement command to manually force downloading firmware image from arbitrary location
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 10:38:47 +0000 (12:38 +0200)]
ULINK driver: Re-order queue functions to reflect the order in commands.h
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Mon, 4 Jul 2011 10:30:13 +0000 (12:30 +0200)]
ULINK driver: Properly propagate return values in ulink_execute_queue()
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
Martin Schmölzer [Sun, 26 Jun 2011 23:00:15 +0000 (01:00 +0200)]
ULINK driver: Update some comments, fix some coding mistakes
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
simonqian.openocd [Tue, 30 Aug 2011 17:52:20 +0000 (01:52 +0800)]
vsllink driver compile fails with'vsllink_debug_buffer' defined but not used
USB communication is handled by code under versaloon directory.
So _DEBUG_USB_COMMS_ should not be used in vsllink.c.
Attachment is the patch.
Rodrigo L. Rosa [Wed, 31 Aug 2011 04:14:33 +0000 (21:14 -0700)]
removed trailing whitespaces
emacs is awesome.
replace-regexp RET [ ]+$ RET RET
and it's done
Rodrigo L. Rosa [Wed, 31 Aug 2011 04:08:59 +0000 (21:08 -0700)]
fix enter debug mode for locking
added an alternative way to enter debug mode, which does not require restarting the chip.
this will not always work, but in general it will (failure 0.3%), and failure is not a dramatic issue, simply have to use the full sequence.
the user can only access "halt", which uses the full sequence, so the user should not have any problems.
restarting the chip requires reconfiguring the flash module. the doc is very poor, so i'd rather have the two methods, and live with the 0.3%.
Rodrigo L. Rosa [Tue, 30 Aug 2011 21:46:20 +0000 (14:46 -0700)]
fix irlen handling
sometimes the master tap will be enabled, since tap switching is required during halt/lock/unlocking procedures.
now irscan handles this, avoiding unnecessary warnings and preventing errors.
Rodrigo L. Rosa [Tue, 30 Aug 2011 22:13:49 +0000 (15:13 -0700)]
fix debug mode,lock,unlock
got new info regarding setting the chip to debug mode, and locking/unlocking flash memory.
the newer implementation is a bit slower, but always works.
the previous implementation would randomly (as once every 25k-70k times) get the chip into a state where the freescale tool would be necessary. this is fixed now.
added functions to play around with the jtag state machine. they are not the happiest, but are necessary to be able to execute the halting/locking/unlocking sequences.
Conflicts:
src/target/dsp5680xx.c
Rodrigo L. Rosa [Tue, 30 Aug 2011 21:26:05 +0000 (14:26 -0700)]
fix error handling during halt
the user can execute halt, but no enter_debug_mode. modified the error handling to suite this.
the new implementation of unlocking will use enter_debug_mode, and should not get the same errors as the user would, because not being able to enter debug mode is actually success when checking for locked flash.
Rodrigo L. Rosa [Tue, 30 Aug 2011 21:19:09 +0000 (14:19 -0700)]
optional crc for flash writing
crc check was always performed on newly flashed data, now it is optional
flash mem can be locked by writing a specific word to a specific address in flash.
to verify flash, target must be halted, and this will (when the new halt sequence is implemented) require reseting the chip. if the target is reset after writing the lock words, then it will lock, hence the CRC will fail because it is not possible to read stuff from the target.
also added a function that resets the jtag state machine.
this is not used yet, but will be soon.
it is implemented to allow strict control over JTAG state machine, necessary to implement to halt and unlocking sequences.
Rodrigo L. Rosa [Tue, 30 Aug 2011 20:49:44 +0000 (13:49 -0700)]
def syntax to match tap irlen
the master tap has a 4 bit irlen
changed the instructions to be 4 bit, ie, removed the zeros.
it makes it clearer to interpret.
Rodrigo L. Rosa [Tue, 16 Aug 2011 02:50:59 +0000 (19:50 -0700)]
dsp568013 disable polling by default
Heythem Bouhaja [Mon, 9 May 2011 08:40:35 +0000 (10:40 +0200)]
cortex_a hybrid & context breakpoints
Evan Hunter [Fri, 26 Aug 2011 06:30:45 +0000 (16:30 +1000)]
Fix off by one bug in FreeRTOS
Jonathan Dumaresq [Wed, 24 Aug 2011 20:13:35 +0000 (16:13 -0400)]
Add Valuline HD to config file
This will add the BSTAP for the medium and high density devices
Jonathan Dumaresq [Wed, 24 Aug 2011 20:08:18 +0000 (16:08 -0400)]
This will add the Value Line HD of stm32 devices.
This has been tested on STM32F100VE
Jie Zhang [Wed, 24 Aug 2011 15:23:04 +0000 (11:23 -0400)]
remove target argument from gdb packet handling functions
Evan [Mon, 18 Jul 2011 03:47:24 +0000 (13:47 +1000)]
Add suspended task list to FreeRTOS support
Evan Hunter [Tue, 23 Aug 2011 04:02:24 +0000 (14:02 +1000)]
Fix FreeRTOS thread list parsing
Jim Paris [Mon, 22 Aug 2011 20:48:14 +0000 (16:48 -0400)]
Fix redbee config files
Currently the board/redbee-*.cfg files incorrectly include the
interface definition. Move the interfaces to interface/,
and create a single board/redbee.cfg that is common to both boards.
Intended usage is now:
openocd -f interface/redbee-econotag.cfg -f board/redbee.cfg
Andreas Bießmann [Fri, 19 Aug 2011 14:53:40 +0000 (16:53 +0200)]
non_cfi: add SST39WF1601 support
Invented by jknick in sparkfun forum:
http://forum.sparkfun.com/viewtopic.php?t=19788
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
olivier Schonken [Sat, 20 Aug 2011 14:31:35 +0000 (16:31 +0200)]
Fix Sam3u flash bank 1 issue
Gunnar Henne [Thu, 18 Aug 2011 08:52:16 +0000 (09:52 +0100)]
cfi: add EN29LV800BB support
Posted by telekatz@gmx.de in the bettyhacks forum for openocd
0.4.0 and integrated into 0.5.0 by Gunnar Henne.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Wed, 17 Aug 2011 15:21:22 +0000 (11:21 -0400)]
remove white space before TAB
Spencer Oliver [Tue, 16 Aug 2011 16:33:19 +0000 (17:33 +0100)]
build: check buspirate build host
buspirate has never supported building on native windows (mingw).
configure will now check this is not the case.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
SimonQian [Mon, 11 Jul 2011 17:48:05 +0000 (01:48 +0800)]
versaloon driver update
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 16 Aug 2011 11:06:57 +0000 (12:06 +0100)]
build: check guess-rev.sh can be found/executed
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 16 Aug 2011 11:00:27 +0000 (12:00 +0100)]
build: rename configure.in to configure.ac
configure.ac is the correct name to use with modern autotools.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 16 Aug 2011 10:58:06 +0000 (11:58 +0100)]
jim: update to fix mingw/msys build issues
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Mon, 15 Aug 2011 14:52:11 +0000 (10:52 -0400)]
show git commit number even when cross-compiling
AC_CHECK_FILE will die when cross-compiling. So don't use it to test the existence of guess-rev.sh.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Øyvind Harboe [Sun, 14 Aug 2011 16:28:12 +0000 (18:28 +0200)]
jimtcl: delete OpenOCD's broken 'stacktrace' command
Use "info stacktrace" instead. This fixes build problems with
latest Jim Tcl.
Stefan Mahr [Wed, 10 Aug 2011 21:42:28 +0000 (23:42 +0200)]
mips: fix potential alignment error
Stefan Mahr [Wed, 10 Aug 2011 21:29:20 +0000 (23:29 +0200)]
mips: fix reading uint32 and uint16 when running on big endian host
Stefan Mahr [Wed, 10 Aug 2011 20:34:41 +0000 (22:34 +0200)]
target: add helper functions to get/set u16 or u32 array from/to buffer
Spencer Oliver [Wed, 10 Aug 2011 21:23:29 +0000 (22:23 +0100)]
ftd2xx: fix build warnings
Due to build warnings introduced in newer versions of ftd2xx we
use strings to report errors rather than result codes. This also
gives us the same behaviour as libftdi.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Wed, 10 Aug 2011 19:32:09 +0000 (15:32 -0400)]
remove useless pxref to SMP subsection
Øyvind Harboe [Thu, 11 Aug 2011 14:23:15 +0000 (16:23 +0200)]
Merge branch 'dsp5680xx_cherry' of git://repo.or.cz/openocd/dsp568013 into HEAD
Steve Bennett [Thu, 11 Aug 2011 02:10:54 +0000 (12:10 +1000)]
Evaluate 'script' in the global scope
Scripts sourced via 'script' should evaluate in the global
scope to make it easy to set and reference global variables.
Signed-off-by: Steve Bennett <steveb@workware.net.au>
Rodrigo L. Rosa [Fri, 5 Aug 2011 18:40:05 +0000 (11:40 -0700)]
fix return code from dsp5680xx_read
it returned ERROR_OK even though it actually failed.
this made the Tcl interface report success, though it had not succeeded.
Rodrigo L. Rosa [Fri, 5 Aug 2011 18:38:12 +0000 (11:38 -0700)]
renamed for clarity
i had started my code from dsp5683xx, i renamed a bunch of stuff to names i consider to be better.
i believe no one is using this code, so nobody should be affected. (it's not too late to do this change)
Andreas Fritiofson [Sat, 16 Jul 2011 21:37:40 +0000 (23:37 +0200)]
rlink: read only the expected number of bytes
After correcting the reply size counter, it should be safe to rely on it
for the number of bytes expected in the USB read, instead of reading the
endpoint maximum. This doesn't make things go any faster but it's nicer and
removes the local buffer.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Sat, 16 Jul 2011 23:02:59 +0000 (01:02 +0200)]
rlink: simplify and optimize queue fill level checks
Add a helper function for running the queue if it would overflow otherwise.
Use it to simplify the queue fill level checks and optimize in a few cases
that would previously run the queue prematurely.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Sat, 16 Jul 2011 21:41:44 +0000 (23:41 +0200)]
rlink: remove redundant text from log messages
__FILE__ and __LINE__ are already printed using the log macros.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Sat, 16 Jul 2011 14:32:50 +0000 (16:32 +0200)]
rlink: remove duplicated code
After the reply_index handling is fixed, there's no need to special case
the out scan.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Sat, 16 Jul 2011 12:30:20 +0000 (14:30 +0200)]
rlink: fix reply counter to enable sending full buffers
dtc_queue.reply_index was wrongly being increased during out scans, causing
the queue to be sent before the out buffer was full. This patch increases
raw upload speed by 50% or so.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Sat, 16 Jul 2011 12:09:08 +0000 (14:09 +0200)]
rlink: more indentation fixes
Remove unnecessary block scopes to reduce indentation level.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Andreas Fritiofson [Sat, 16 Jul 2011 12:03:39 +0000 (14:03 +0200)]
rlink: fix indentation errors
Indentation was inconsistent and some lines not indented at all. Quickfix
using Eclipse's auto-indentation.
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Drasko DRASKOVIC [Mon, 25 Jul 2011 12:23:35 +0000 (14:23 +0200)]
mips32 : Fixed memory byte access
Function mips_m4k_write_memory() does endianess byte swap,
but this procedure break one byte access (temporary array
overwrites content in buffer).
As a fix, this endianess swap and buffer affecting
is preformed only on hword and word accesses (not on byte access).
Drasko DRASKOVIC [Thu, 7 Jul 2011 15:59:13 +0000 (17:59 +0200)]
mips32: Sync Caches to Make Instr Writes Effective
Pprogram that loads another program into memory is actually writing the
D- side cache.
The instructions it has loaded can't be executed until they reach the
I-cache.
After the instructions have been written, the loader should arrange to
write back any containing D-cache line and invalidate any locations
already in the I-cache.
For the MIPS Architecture Release2 cores, we can use synci command
that does this job.
For Release1 we must use "cache" instruction.
Drasko DRASKOVIC [Thu, 7 Jul 2011 15:41:20 +0000 (17:41 +0200)]
mips32: Added CP0 coprocessor R/W routines
This patch adds MIPS32 CP0 coprocessor R/W routines,
as well as adequate commands to use these routines via
telnet interface.
Now is becomes possible to affect CP0 internal registers
and configure CPU directly from OpenOCD.
Drasko DRASKOVIC [Thu, 7 Jul 2011 14:38:38 +0000 (16:38 +0200)]
mips_m4k: common_magic should be unsigned
For all architectures we use distinct common magic number,
and this should be a uint32_t type.
Otherwise, comparison with macros will yield compilation
warning.
Drasko DRASKOVIC [Tue, 5 Jul 2011 15:37:05 +0000 (17:37 +0200)]
mips32: Removed Unnecessary JTAG Queue Flush
jtag_execute_queue() is executed as a part of mips_ejtag_drscan_32().
No need for this to be done before - removed for optimisation.
Rodrigo L. Rosa [Tue, 9 Aug 2011 18:25:23 +0000 (11:25 -0700)]
fix tapenabler return code
if tap enable/disable failed then a warning was written to the log, but JIM_OK was returned. if using openocd via a TCP interface to the TCL port, there is no way to catch that the command failed (it didn't enable the tap, so it failed)
now it return an error if it fails.
Rodrigo L. Rosa [Tue, 9 Aug 2011 18:24:42 +0000 (11:24 -0700)]
fix return error msj
retval was not correctly propagated
Andreas Bießmann [Tue, 12 Jul 2011 10:38:22 +0000 (12:38 +0200)]
flash/nor/cfi: fix TopBottom for atmel chips
There are some older atmel nor chips which have negated logic for
TopBottom detection. This patch adds a special handling for the old
chips. This is the same mechanism as implemented in linux kernel.
Signed-off-by: Andreas Bießmann <andreas.devel@gmail.com>
Øyvind Harboe [Tue, 9 Aug 2011 18:14:50 +0000 (20:14 +0200)]
Revert "dsp5680xx: disable for now, it generates warnings"
This reverts commit
d567df02b9f3e7d2e7e78b3c2907ecad9aa4bbd4.
Rodrigo L. Rosa [Wed, 20 Jul 2011 03:04:46 +0000 (20:04 -0700)]
dsp5680xx fix constante ref
a counter was incorrectly set
when i added the macros i incorrectly called them.
fixed that.
Rodrigo L. Rosa [Wed, 20 Jul 2011 03:03:08 +0000 (20:03 -0700)]
dsp5680xx fix FM clk
before doing anything with the flash module (FM) the clock divider must be set.
if erase_check was the first thing done with the FM after reset then an error would be generated because the clk divider was not set.
now erase_check sets the clk divider.
Rodrigo L. Rosa [Wed, 20 Jul 2011 03:01:19 +0000 (20:01 -0700)]
dps5680xx fix warnings
reorganized code to get rid of compiler warnings
the warning were related to allignment, i do not get these warning on my build system (i've tried setting the compiler flag but it doesn't work, still working on why) so i cannot detect them (yet.)
Jean-Christophe PLAGNIOL-VILLARD [Tue, 9 Aug 2011 05:34:50 +0000 (13:34 +0800)]
Archive and recreate NEWS file.
Archive released NEWS file as NEWS-0.5.0.
Create new NEWS file from release script template.
Jean-Christophe PLAGNIOL-VILLARD [Tue, 9 Aug 2011 05:34:50 +0000 (13:34 +0800)]
Bump minor version and add -dev tag.
Bump minor package version number: 0.5.0 -> 0.6.0
Add '-dev' version tag: 0.6.0 -> 0.6.0-dev
Jean-Christophe PLAGNIOL-VILLARD [Tue, 9 Aug 2011 05:34:50 +0000 (13:34 +0800)]
The openocd 0.5.0 release.
Remove '-dev' version tag: 0.5.0-dev -> 0.5.0
Øyvind Harboe [Fri, 5 Aug 2011 07:57:46 +0000 (09:57 +0200)]
arm11: disable broken optimization for setting current scan chain
Luca Bruno [Wed, 3 Aug 2011 13:20:06 +0000 (14:20 +0100)]
Automatically generate ChangeLog from git log for release tarball
make dist should use git2cl to generate ChangeLog from git history,
populating the placeholder file in released tarball.
Signed-off-by: Luca Bruno <lucab@debian.org>
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
B. A. Bryce [Tue, 2 Aug 2011 10:33:03 +0000 (11:33 +0100)]
cfg: allow stellaris device class override
Some devices, eg. The Tempest class return the wrong device class
when queried. Add the ability to manually override the device class.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Mon, 1 Aug 2011 16:15:19 +0000 (17:15 +0100)]
etb: fix incorrect previous patchset
This corrects two issues found with openocd.
d7f71e7fe9645fa8c3f88cf6fc9ad438aa6708f3 removed some code that was
being used.
The above then caused even more code to get removed by commit
1cfb2287a67c1f78b76583b2e5ed83ca3560b0d5.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Fri, 29 Jul 2011 16:01:31 +0000 (17:01 +0100)]
cfg: support calling legacy stm32 scripts
For the time being we support the old stm32 script names - this will
be removed before the next release cycle.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 28 Jul 2011 15:06:24 +0000 (16:06 +0100)]
docs: remove obsolete luminary target info
The lm3s variant is not required as this is handled in the
target script - see tcl/target/stellaris.cfg.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 28 Jul 2011 11:47:49 +0000 (12:47 +0100)]
flash: add support for deprecated stm32 flash cmds
Issue warning when the old cmd is used and redirect to new supported one.
These deprecated cmds will be removed at some point.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 28 Jul 2011 10:45:09 +0000 (11:45 +0100)]
cfg: update scripts to use new stm32 driver names
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 28 Jul 2011 10:44:48 +0000 (11:44 +0100)]
docs: update to use new stm32 driver names
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Thu, 28 Jul 2011 10:42:27 +0000 (11:42 +0100)]
flash: update stm32 driver names
Use consistent names for the stm32 family flash drivers, eg.
stm32x -> stm32f1x
stm32f2xxx -> stm32f2x
this makes it easier to add support for newer stm32 families.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 27 Jul 2011 09:56:25 +0000 (10:56 +0100)]
cfg: add Fujitsu FM3 config
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Wed, 27 Jul 2011 09:28:24 +0000 (10:28 +0100)]
doc: add Fujitsu FM3 flash driver info
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Thu, 21 Jul 2011 15:29:20 +0000 (11:29 -0400)]
remove doc on the deprecated '-p' option
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Jie Zhang [Thu, 21 Jul 2011 15:16:50 +0000 (11:16 -0400)]
Update doc about Jim since it's not a single .C file and a single .H file any more
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Ronny Strutz [Tue, 26 Jul 2011 20:14:47 +0000 (21:14 +0100)]
add Fujitsu FM3 Family flash support
Signed-off-by: Ronny Strutz <ronny@ewoks.de>
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Michael Hunold [Mon, 18 Jul 2011 07:20:31 +0000 (09:20 +0200)]
CPU name in TMPA900 config file should obviously be TMPA900 (not TMPA910).
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Mon, 18 Jul 2011 13:02:31 +0000 (14:02 +0100)]
build: do not install jimtcl
We now make use of the new jimtcl --disable-install-jim
Now we can install openocd without jimtcl bring installed.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Mon, 18 Jul 2011 13:01:05 +0000 (14:01 +0100)]
jimtcl: update to support --disable-install-jim
Update jimtcl version to commit
6233a6c5d39928f1bfafa8f41cb1ddf0c5a83de0
This enable to to build jimtcl as a submodule but not install it.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Øyvind Harboe [Fri, 15 Jul 2011 10:05:37 +0000 (12:05 +0200)]
stm32f2xxx: comments about frequency choice
Luca Bruno [Sat, 9 Jul 2011 21:44:39 +0000 (23:44 +0200)]
Do not append git info to version string when building from released tarball
When building official releases from tarball, git commit info is not
available in the building environment. Thus, automake should not try to
append the git commit to the version string.
Signed-off-by: Luca Bruno <lucab@debian.org>
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 12 Jul 2011 14:51:18 +0000 (15:51 +0100)]
ftd2xx: handle FT_GetLatencyTimer bug in v1.04
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Spencer Oliver [Tue, 12 Jul 2011 13:40:19 +0000 (14:40 +0100)]
busblaster: Fix warnings when building against D2XX
The default is -Werror, so warnings become errors.
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Steve Bennett [Tue, 12 Jul 2011 11:56:21 +0000 (12:56 +0100)]
ft2232: Fix warnings when building against D2XX
The default is -Werror, so warnings become errors
Signed-off-by: Steve Bennett <steveb@workware.net.au>
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)