1 /***************************************************************************
2 * Copyright (C) 2011 by Rodrigo L. Rosa *
3 * rodrigorosa.LG@gmail.com *
5 * Based on a file written by: *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License as published by *
12 * the Free Software Foundation; either version 2 of the License, or *
13 * (at your option) any later version. *
15 * This program is distributed in the hope that it will be useful, *
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
18 * GNU General Public License for more details. *
20 * You should have received a copy of the GNU General Public License *
21 * along with this program; if not, write to the *
22 * Free Software Foundation, Inc., *
23 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
24 ***************************************************************************/
27 * @file dsp5680xx_flash.c
28 * @author Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>
29 * @date Thu Jun 9 18:21:58 2011
31 * @brief This file implements the basic functions to run flashing commands
32 * from the TCL interface.
33 * It allows the user to flash the Freescale 5680xx DSP.
43 #include <helper/binarybuffer.h>
44 #include <helper/time_support.h>
45 #include <target/algorithm.h>
46 #include <target/dsp5680xx.h>
48 struct dsp5680xx_flash_bank
{
49 struct working_area
*write_algorithm
;
52 static int dsp5680xx_build_sector_list(struct flash_bank
*bank
)
54 uint32_t offset
= HFM_FLASH_BASE_ADDR
;
56 bank
->sectors
= malloc(sizeof(struct flash_sector
) * bank
->num_sectors
);
59 for (i
= 0; i
< bank
->num_sectors
; ++i
) {
60 bank
->sectors
[i
].offset
= i
* HFM_SECTOR_SIZE
;
61 bank
->sectors
[i
].size
= HFM_SECTOR_SIZE
;
62 offset
+= bank
->sectors
[i
].size
;
63 bank
->sectors
[i
].is_erased
= -1;
64 bank
->sectors
[i
].is_protected
= -1;
66 LOG_USER("%s not tested yet.", __func__
);
71 /* flash bank dsp5680xx 0 0 0 0 <target#> */
72 FLASH_BANK_COMMAND_HANDLER(dsp5680xx_flash_bank_command
)
74 struct dsp5680xx_flash_bank
*nbank
;
76 nbank
= malloc(sizeof(struct dsp5680xx_flash_bank
));
78 bank
->base
= HFM_FLASH_BASE_ADDR
;
79 bank
->size
= HFM_SIZE_BYTES
; /* top 4k not accessible */
80 bank
->driver_priv
= nbank
;
81 bank
->num_sectors
= HFM_SECTOR_COUNT
;
82 dsp5680xx_build_sector_list(bank
);
88 * A memory mapped register (PROT) holds information regarding sector protection.
89 * Protection refers to undesired core access.
90 * The value in this register is loaded from flash upon reset.
96 static int dsp5680xx_flash_protect_check(struct flash_bank
*bank
)
98 int retval
= ERROR_OK
;
100 uint16_t protected = 0;
102 retval
= dsp5680xx_f_protect_check(bank
->target
, &protected);
103 if (retval
!= ERROR_OK
) {
104 for (int i
= 0; i
< HFM_SECTOR_COUNT
; i
++)
105 bank
->sectors
[i
].is_protected
= -1;
108 for (int i
= 0; i
< HFM_SECTOR_COUNT
/ 2; i
++) {
110 bank
->sectors
[2 * i
].is_protected
= 1;
111 bank
->sectors
[2 * i
+ 1].is_protected
= 1;
113 bank
->sectors
[2 * i
].is_protected
= 0;
114 bank
->sectors
[2 * i
+ 1].is_protected
= 0;
116 protected = (protected >> 1);
122 * Protection funcionality is not implemented.
123 * The current implementation applies/removes security on the chip.
124 * The chip is effectively secured/unsecured after the first reset
125 * following the execution of this function.
128 * @param set Apply or remove security on the chip.
129 * @param first This parameter is ignored.
130 * @param last This parameter is ignored.
134 static int dsp5680xx_flash_protect(struct flash_bank
*bank
, int set
, int first
,
138 * This applies security to flash module after next reset, it does
139 * not actually apply protection (protection refers to undesired access from the core)
144 retval
= dsp5680xx_f_lock(bank
->target
);
146 retval
= dsp5680xx_f_unlock(bank
->target
);
147 if (retval
== ERROR_OK
) {
148 /* mark all as erased */
149 for (int i
= 0; i
<= (HFM_SECTOR_COUNT
- 1); i
++)
150 /* FM does not recognize it as erased if erased via JTAG. */
151 bank
->sectors
[i
].is_erased
= 1;
158 * The dsp5680xx use word addressing. The "/2" that appear in the following code
159 * are a workaround for the fact that OpenOCD uses byte addressing.
162 * @param buffer Data to write to flash.
164 * @param count In bytes (2 bytes per address).
168 static int dsp5680xx_flash_write(struct flash_bank
*bank
, uint8_t * buffer
,
169 uint32_t offset
, uint32_t count
)
173 if ((offset
+ count
/ 2) > bank
->size
) {
174 LOG_ERROR("%s: Flash bank cannot fit data.", __func__
);
179 * Writing to odd addresses not supported.
180 * This chip uses word addressing, Openocd only supports byte addressing.
181 * The workaround results in disabling writing to odd byte addresses
183 LOG_ERROR("%s: Writing to odd addresses not supported for this target", __func__
);
186 retval
= dsp5680xx_f_wr(bank
->target
, buffer
, bank
->base
+ offset
/ 2, count
, 0);
189 for (addr_word
= bank
->base
+ offset
/ 2; addr_word
< count
/ 2;
190 addr_word
+= (HFM_SECTOR_SIZE
/ 2)) {
191 if (retval
== ERROR_OK
)
192 bank
->sectors
[addr_word
/ (HFM_SECTOR_SIZE
/ 2)].is_erased
= 0;
194 bank
->sectors
[addr_word
/ (HFM_SECTOR_SIZE
/ 2)].is_erased
= -1;
199 static int dsp5680xx_probe(struct flash_bank
*bank
)
201 LOG_DEBUG("%s not implemented", __func__
);
205 static int dsp5680xx_flash_info(struct flash_bank
*bank
, char *buf
,
208 snprintf(buf
, buf_size
,
209 "\ndsp5680xx flash driver info:\n - See comments in code.");
214 * The flash module (FM) on the dsp5680xx supports both individual sector
215 * and mass erase of the flash memory.
216 * If this function is called with @first == @last == 0 or if @first is the
217 * first sector (#0) and @last is the last sector then the mass erase command
218 * is executed (much faster than erasing each sector individually).
226 static int dsp5680xx_flash_erase(struct flash_bank
*bank
, int first
, int last
)
230 retval
= dsp5680xx_f_erase(bank
->target
, (uint32_t) first
, (uint32_t) last
);
231 if ((!(first
| last
)) || ((first
== 0) && (last
== (HFM_SECTOR_COUNT
- 1))))
232 last
= HFM_SECTOR_COUNT
- 1;
233 if (retval
== ERROR_OK
)
234 for (int i
= first
; i
<= last
; i
++)
235 bank
->sectors
[i
].is_erased
= 1;
238 * If an error occurred unknown status
239 *is set even though some sector could have been correctly erased.
241 for (int i
= first
; i
<= last
; i
++)
242 bank
->sectors
[i
].is_erased
= -1;
247 * The flash module (FM) on the dsp5680xx support a blank check function.
248 * This function executes the FM's blank check functionality on each and every sector.
254 static int dsp5680xx_flash_erase_check(struct flash_bank
*bank
)
256 int retval
= ERROR_OK
;
262 for (i
= 0; i
< HFM_SECTOR_COUNT
; i
++) {
263 if (bank
->sectors
[i
].is_erased
== -1) {
264 retval
= dsp5680xx_f_erase_check(bank
->target
, &erased
, i
);
265 if (retval
!= ERROR_OK
) {
266 bank
->sectors
[i
].is_erased
= -1;
269 bank
->sectors
[i
].is_erased
= 1;
271 bank
->sectors
[i
].is_erased
= 0;
278 struct flash_driver dsp5680xx_flash
= {
279 .name
= "dsp5680xx_flash",
280 .flash_bank_command
= dsp5680xx_flash_bank_command
,
281 .erase
= dsp5680xx_flash_erase
,
282 .protect
= dsp5680xx_flash_protect
,
283 .write
= dsp5680xx_flash_write
,
284 /* .read = default_flash_read, */
285 .probe
= dsp5680xx_probe
,
286 .auto_probe
= dsp5680xx_probe
,
287 .erase_check
= dsp5680xx_flash_erase_check
,
288 .protect_check
= dsp5680xx_flash_protect_check
,
289 .info
= dsp5680xx_flash_info
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)