1 /***************************************************************************
2 * Copyright (C) 2009 Zachary T Welch *
3 * zw@superlucidity.net *
5 * Copyright (C) 2007,2008,2009 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2009 SoftPLC Corporation *
12 * Copyright (C) 2005 by Dominic Rath *
13 * Dominic.Rath@gmx.de *
15 * This program is free software; you can redistribute it and/or modify *
16 * it under the terms of the GNU General Public License as published by *
17 * the Free Software Foundation; either version 2 of the License, or *
18 * (at your option) any later version. *
20 * This program is distributed in the hope that it will be useful, *
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
23 * GNU General Public License for more details. *
25 * You should have received a copy of the GNU General Public License *
26 * along with this program; if not, write to the *
27 * Free Software Foundation, Inc., *
28 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
29 ***************************************************************************/
37 #include "interface.h"
38 #include <transport/transport.h>
44 /* SVF and XSVF are higher level JTAG command sets (for boundary scan) */
46 #include "xsvf/xsvf.h"
48 /** The number of JTAG queue flushes (for profiling and debugging purposes). */
49 static int jtag_flush_queue_count
;
51 /* Sleep this # of ms after flushing the queue */
52 static int jtag_flush_queue_sleep
;
54 static void jtag_add_scan_check(struct jtag_tap
*active
,
55 void (*jtag_add_scan
)(struct jtag_tap
*active
,
57 const struct scan_field
*in_fields
,
59 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
);
62 * The jtag_error variable is set when an error occurs while executing
63 * the queue. Application code may set this using jtag_set_error(),
64 * when an error occurs during processing that should be reported during
65 * jtag_execute_queue().
67 * The value is set and cleared, but never read by normal application code.
69 * This value is returned (and cleared) by jtag_execute_queue().
71 static int jtag_error
= ERROR_OK
;
73 static const char *jtag_event_strings
[] = {
74 [JTAG_TRST_ASSERTED
] = "TAP reset",
75 [JTAG_TAP_EVENT_SETUP
] = "TAP setup",
76 [JTAG_TAP_EVENT_ENABLE
] = "TAP enabled",
77 [JTAG_TAP_EVENT_DISABLE
] = "TAP disabled",
81 * JTAG adapters must initialize with TRST and SRST de-asserted
82 * (they're negative logic, so that means *high*). But some
83 * hardware doesn't necessarily work that way ... so set things
84 * up so that jtag_init() always forces that state.
86 static int jtag_trst
= -1;
87 static int jtag_srst
= -1;
90 * List all TAPs that have been created.
92 static struct jtag_tap
*__jtag_all_taps
;
94 static enum reset_types jtag_reset_config
= RESET_NONE
;
95 tap_state_t cmd_queue_cur_state
= TAP_RESET
;
97 static bool jtag_verify_capture_ir
= true;
98 static int jtag_verify
= 1;
100 /* how long the OpenOCD should wait before attempting JTAG communication after reset lines
101 *deasserted (in ms) */
102 static int adapter_nsrst_delay
; /* default to no nSRST delay */
103 static int jtag_ntrst_delay
;/* default to no nTRST delay */
104 static int adapter_nsrst_assert_width
; /* width of assertion */
105 static int jtag_ntrst_assert_width
; /* width of assertion */
108 * Contains a single callback along with a pointer that will be passed
109 * when an event occurs.
111 struct jtag_event_callback
{
112 /** a event callback */
113 jtag_event_handler_t callback
;
114 /** the private data to pass to the callback */
116 /** the next callback */
117 struct jtag_event_callback
*next
;
120 /* callbacks to inform high-level handlers about JTAG state changes */
121 static struct jtag_event_callback
*jtag_event_callbacks
;
124 static int speed_khz
;
125 /* speed to fallback to when RCLK is requested but not supported */
126 static int rclk_fallback_speed_khz
;
127 static enum {CLOCK_MODE_UNSELECTED
, CLOCK_MODE_KHZ
, CLOCK_MODE_RCLK
} clock_mode
;
128 static int jtag_speed
;
130 static struct jtag_interface
*jtag
;
133 struct jtag_interface
*jtag_interface
;
135 void jtag_set_flush_queue_sleep(int ms
)
137 jtag_flush_queue_sleep
= ms
;
140 void jtag_set_error(int error
)
142 if ((error
== ERROR_OK
) || (jtag_error
!= ERROR_OK
))
147 int jtag_error_clear(void)
149 int temp
= jtag_error
;
150 jtag_error
= ERROR_OK
;
156 static bool jtag_poll
= 1;
158 bool is_jtag_poll_safe(void)
160 /* Polling can be disabled explicitly with set_enabled(false).
161 * It is also implicitly disabled while TRST is active and
162 * while SRST is gating the JTAG clock.
164 if (!transport_is_jtag())
167 if (!jtag_poll
|| jtag_trst
!= 0)
169 return jtag_srst
== 0 || (jtag_reset_config
& RESET_SRST_NO_GATING
);
172 bool jtag_poll_get_enabled(void)
177 void jtag_poll_set_enabled(bool value
)
184 struct jtag_tap
*jtag_all_taps(void)
186 return __jtag_all_taps
;
189 unsigned jtag_tap_count(void)
191 struct jtag_tap
*t
= jtag_all_taps();
200 unsigned jtag_tap_count_enabled(void)
202 struct jtag_tap
*t
= jtag_all_taps();
212 /** Append a new TAP to the chain of all taps. */
213 void jtag_tap_add(struct jtag_tap
*t
)
215 unsigned jtag_num_taps
= 0;
217 struct jtag_tap
**tap
= &__jtag_all_taps
;
218 while (*tap
!= NULL
) {
220 tap
= &(*tap
)->next_tap
;
223 t
->abs_chain_position
= jtag_num_taps
;
226 /* returns a pointer to the n-th device in the scan chain */
227 struct jtag_tap
*jtag_tap_by_position(unsigned n
)
229 struct jtag_tap
*t
= jtag_all_taps();
237 struct jtag_tap
*jtag_tap_by_string(const char *s
)
239 /* try by name first */
240 struct jtag_tap
*t
= jtag_all_taps();
243 if (0 == strcmp(t
->dotted_name
, s
))
248 /* no tap found by name, so try to parse the name as a number */
250 if (parse_uint(s
, &n
) != ERROR_OK
)
253 /* FIXME remove this numeric fallback code late June 2010, along
254 * with all info in the User's Guide that TAPs have numeric IDs.
255 * Also update "scan_chain" output to not display the numbers.
257 t
= jtag_tap_by_position(n
);
259 LOG_WARNING("Specify TAP '%s' by name, not number %u",
265 struct jtag_tap
*jtag_tap_next_enabled(struct jtag_tap
*p
)
267 p
= p
? p
->next_tap
: jtag_all_taps();
276 const char *jtag_tap_name(const struct jtag_tap
*tap
)
278 return (tap
== NULL
) ? "(unknown)" : tap
->dotted_name
;
282 int jtag_register_event_callback(jtag_event_handler_t callback
, void *priv
)
284 struct jtag_event_callback
**callbacks_p
= &jtag_event_callbacks
;
286 if (callback
== NULL
)
287 return ERROR_COMMAND_SYNTAX_ERROR
;
290 while ((*callbacks_p
)->next
)
291 callbacks_p
= &((*callbacks_p
)->next
);
292 callbacks_p
= &((*callbacks_p
)->next
);
295 (*callbacks_p
) = malloc(sizeof(struct jtag_event_callback
));
296 (*callbacks_p
)->callback
= callback
;
297 (*callbacks_p
)->priv
= priv
;
298 (*callbacks_p
)->next
= NULL
;
303 int jtag_unregister_event_callback(jtag_event_handler_t callback
, void *priv
)
305 struct jtag_event_callback
**p
= &jtag_event_callbacks
, *temp
;
307 if (callback
== NULL
)
308 return ERROR_COMMAND_SYNTAX_ERROR
;
311 if (((*p
)->priv
!= priv
) || ((*p
)->callback
!= callback
)) {
324 int jtag_call_event_callbacks(enum jtag_event event
)
326 struct jtag_event_callback
*callback
= jtag_event_callbacks
;
328 LOG_DEBUG("jtag event: %s", jtag_event_strings
[event
]);
331 struct jtag_event_callback
*next
;
333 /* callback may remove itself */
334 next
= callback
->next
;
335 callback
->callback(event
, callback
->priv
);
342 static void jtag_checks(void)
344 assert(jtag_trst
== 0);
347 static void jtag_prelude(tap_state_t state
)
351 assert(state
!= TAP_INVALID
);
353 cmd_queue_cur_state
= state
;
356 void jtag_add_ir_scan_noverify(struct jtag_tap
*active
, const struct scan_field
*in_fields
,
361 int retval
= interface_jtag_add_ir_scan(active
, in_fields
, state
);
362 jtag_set_error(retval
);
365 static void jtag_add_ir_scan_noverify_callback(struct jtag_tap
*active
,
367 const struct scan_field
*in_fields
,
370 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
373 /* If fields->in_value is filled out, then the captured IR value will be checked */
374 void jtag_add_ir_scan(struct jtag_tap
*active
, struct scan_field
*in_fields
, tap_state_t state
)
376 assert(state
!= TAP_RESET
);
378 if (jtag_verify
&& jtag_verify_capture_ir
) {
379 /* 8 x 32 bit id's is enough for all invocations */
381 /* if we are to run a verification of the ir scan, we need to get the input back.
382 * We may have to allocate space if the caller didn't ask for the input back.
384 in_fields
->check_value
= active
->expected
;
385 in_fields
->check_mask
= active
->expected_mask
;
386 jtag_add_scan_check(active
, jtag_add_ir_scan_noverify_callback
, 1, in_fields
,
389 jtag_add_ir_scan_noverify(active
, in_fields
, state
);
392 void jtag_add_plain_ir_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
395 assert(out_bits
!= NULL
);
396 assert(state
!= TAP_RESET
);
400 int retval
= interface_jtag_add_plain_ir_scan(
401 num_bits
, out_bits
, in_bits
, state
);
402 jtag_set_error(retval
);
405 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
406 uint8_t *in_check_mask
, int num_bits
);
408 static int jtag_check_value_mask_callback(jtag_callback_data_t data0
,
409 jtag_callback_data_t data1
,
410 jtag_callback_data_t data2
,
411 jtag_callback_data_t data3
)
413 return jtag_check_value_inner((uint8_t *)data0
,
419 static void jtag_add_scan_check(struct jtag_tap
*active
, void (*jtag_add_scan
)(
420 struct jtag_tap
*active
,
422 const struct scan_field
*in_fields
,
424 int in_num_fields
, struct scan_field
*in_fields
, tap_state_t state
)
426 jtag_add_scan(active
, in_num_fields
, in_fields
, state
);
428 for (int i
= 0; i
< in_num_fields
; i
++) {
429 if ((in_fields
[i
].check_value
!= NULL
) && (in_fields
[i
].in_value
!= NULL
)) {
430 /* this is synchronous for a minidriver */
431 jtag_add_callback4(jtag_check_value_mask_callback
,
432 (jtag_callback_data_t
)in_fields
[i
].in_value
,
433 (jtag_callback_data_t
)in_fields
[i
].check_value
,
434 (jtag_callback_data_t
)in_fields
[i
].check_mask
,
435 (jtag_callback_data_t
)in_fields
[i
].num_bits
);
440 void jtag_add_dr_scan_check(struct jtag_tap
*active
,
442 struct scan_field
*in_fields
,
446 jtag_add_scan_check(active
, jtag_add_dr_scan
, in_num_fields
, in_fields
, state
);
448 jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
452 void jtag_add_dr_scan(struct jtag_tap
*active
,
454 const struct scan_field
*in_fields
,
457 assert(state
!= TAP_RESET
);
462 retval
= interface_jtag_add_dr_scan(active
, in_num_fields
, in_fields
, state
);
463 jtag_set_error(retval
);
466 void jtag_add_plain_dr_scan(int num_bits
, const uint8_t *out_bits
, uint8_t *in_bits
,
469 assert(out_bits
!= NULL
);
470 assert(state
!= TAP_RESET
);
475 retval
= interface_jtag_add_plain_dr_scan(num_bits
, out_bits
, in_bits
, state
);
476 jtag_set_error(retval
);
479 void jtag_add_tlr(void)
481 jtag_prelude(TAP_RESET
);
482 jtag_set_error(interface_jtag_add_tlr());
484 /* NOTE: order here matches TRST path in jtag_add_reset() */
485 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
486 jtag_notify_event(JTAG_TRST_ASSERTED
);
490 * If supported by the underlying adapter, this clocks a raw bit sequence
491 * onto TMS for switching betwen JTAG and SWD modes.
493 * DO NOT use this to bypass the integrity checks and logging provided
494 * by the jtag_add_pathmove() and jtag_add_statemove() calls.
496 * @param nbits How many bits to clock out.
497 * @param seq The bit sequence. The LSB is bit 0 of seq[0].
498 * @param state The JTAG tap state to record on completion. Use
499 * TAP_INVALID to represent being in in SWD mode.
501 * @todo Update naming conventions to stop assuming everything is JTAG.
503 int jtag_add_tms_seq(unsigned nbits
, const uint8_t *seq
, enum tap_state state
)
507 if (!(jtag
->supported
& DEBUG_CAP_TMS_SEQ
))
508 return ERROR_JTAG_NOT_IMPLEMENTED
;
511 cmd_queue_cur_state
= state
;
513 retval
= interface_add_tms_seq(nbits
, seq
, state
);
514 jtag_set_error(retval
);
518 void jtag_add_pathmove(int num_states
, const tap_state_t
*path
)
520 tap_state_t cur_state
= cmd_queue_cur_state
;
522 /* the last state has to be a stable state */
523 if (!tap_is_state_stable(path
[num_states
- 1])) {
524 LOG_ERROR("BUG: TAP path doesn't finish in a stable state");
525 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
529 for (int i
= 0; i
< num_states
; i
++) {
530 if (path
[i
] == TAP_RESET
) {
531 LOG_ERROR("BUG: TAP_RESET is not a valid state for pathmove sequences");
532 jtag_set_error(ERROR_JTAG_STATE_INVALID
);
536 if (tap_state_transition(cur_state
, true) != path
[i
] &&
537 tap_state_transition(cur_state
, false) != path
[i
]) {
538 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition",
539 tap_state_name(cur_state
), tap_state_name(path
[i
]));
540 jtag_set_error(ERROR_JTAG_TRANSITION_INVALID
);
548 jtag_set_error(interface_jtag_add_pathmove(num_states
, path
));
549 cmd_queue_cur_state
= path
[num_states
- 1];
552 int jtag_add_statemove(tap_state_t goal_state
)
554 tap_state_t cur_state
= cmd_queue_cur_state
;
556 if (goal_state
!= cur_state
) {
557 LOG_DEBUG("cur_state=%s goal_state=%s",
558 tap_state_name(cur_state
),
559 tap_state_name(goal_state
));
562 /* If goal is RESET, be paranoid and force that that transition
563 * (e.g. five TCK cycles, TMS high). Else trust "cur_state".
565 if (goal_state
== TAP_RESET
)
567 else if (goal_state
== cur_state
)
570 else if (tap_is_state_stable(cur_state
) && tap_is_state_stable(goal_state
)) {
571 unsigned tms_bits
= tap_get_tms_path(cur_state
, goal_state
);
572 unsigned tms_count
= tap_get_tms_path_len(cur_state
, goal_state
);
573 tap_state_t moves
[8];
574 assert(tms_count
< ARRAY_SIZE(moves
));
576 for (unsigned i
= 0; i
< tms_count
; i
++, tms_bits
>>= 1) {
577 bool bit
= tms_bits
& 1;
579 cur_state
= tap_state_transition(cur_state
, bit
);
580 moves
[i
] = cur_state
;
583 jtag_add_pathmove(tms_count
, moves
);
584 } else if (tap_state_transition(cur_state
, true) == goal_state
585 || tap_state_transition(cur_state
, false) == goal_state
)
586 jtag_add_pathmove(1, &goal_state
);
593 void jtag_add_runtest(int num_cycles
, tap_state_t state
)
596 jtag_set_error(interface_jtag_add_runtest(num_cycles
, state
));
600 void jtag_add_clocks(int num_cycles
)
602 if (!tap_is_state_stable(cmd_queue_cur_state
)) {
603 LOG_ERROR("jtag_add_clocks() called with TAP in unstable state \"%s\"",
604 tap_state_name(cmd_queue_cur_state
));
605 jtag_set_error(ERROR_JTAG_NOT_STABLE_STATE
);
609 if (num_cycles
> 0) {
611 jtag_set_error(interface_jtag_add_clocks(num_cycles
));
615 void swd_add_reset(int req_srst
)
618 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
619 LOG_ERROR("BUG: can't assert SRST");
620 jtag_set_error(ERROR_FAIL
);
626 /* Maybe change SRST signal state */
627 if (jtag_srst
!= req_srst
) {
630 retval
= interface_jtag_add_reset(0, req_srst
);
631 if (retval
!= ERROR_OK
)
632 jtag_set_error(retval
);
634 retval
= jtag_execute_queue();
636 if (retval
!= ERROR_OK
) {
637 LOG_ERROR("TRST/SRST error");
641 /* SRST resets everything hooked up to that signal */
642 jtag_srst
= req_srst
;
644 LOG_DEBUG("SRST line asserted");
645 if (adapter_nsrst_assert_width
)
646 jtag_add_sleep(adapter_nsrst_assert_width
* 1000);
648 LOG_DEBUG("SRST line released");
649 if (adapter_nsrst_delay
)
650 jtag_add_sleep(adapter_nsrst_delay
* 1000);
655 void jtag_add_reset(int req_tlr_or_trst
, int req_srst
)
657 int trst_with_tlr
= 0;
661 /* Without SRST, we must use target-specific JTAG operations
662 * on each target; callers should not be requesting SRST when
663 * that signal doesn't exist.
665 * RESET_SRST_PULLS_TRST is a board or chip level quirk, which
666 * can kick in even if the JTAG adapter can't drive TRST.
669 if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
670 LOG_ERROR("BUG: can't assert SRST");
671 jtag_set_error(ERROR_FAIL
);
674 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) != 0
675 && !req_tlr_or_trst
) {
676 LOG_ERROR("BUG: can't assert only SRST");
677 jtag_set_error(ERROR_FAIL
);
683 /* JTAG reset (entry to TAP_RESET state) can always be achieved
684 * using TCK and TMS; that may go through a TAP_{IR,DR}UPDATE
685 * state first. TRST accelerates it, and bypasses those states.
687 * RESET_TRST_PULLS_SRST is a board or chip level quirk, which
688 * can kick in even if the JTAG adapter can't drive SRST.
690 if (req_tlr_or_trst
) {
691 if (!(jtag_reset_config
& RESET_HAS_TRST
))
693 else if ((jtag_reset_config
& RESET_TRST_PULLS_SRST
) != 0
700 /* Maybe change TRST and/or SRST signal state */
701 if (jtag_srst
!= new_srst
|| jtag_trst
!= new_trst
) {
704 retval
= interface_jtag_add_reset(new_trst
, new_srst
);
705 if (retval
!= ERROR_OK
)
706 jtag_set_error(retval
);
708 retval
= jtag_execute_queue();
710 if (retval
!= ERROR_OK
) {
711 LOG_ERROR("TRST/SRST error");
716 /* SRST resets everything hooked up to that signal */
717 if (jtag_srst
!= new_srst
) {
718 jtag_srst
= new_srst
;
720 LOG_DEBUG("SRST line asserted");
721 if (adapter_nsrst_assert_width
)
722 jtag_add_sleep(adapter_nsrst_assert_width
* 1000);
724 LOG_DEBUG("SRST line released");
725 if (adapter_nsrst_delay
)
726 jtag_add_sleep(adapter_nsrst_delay
* 1000);
730 /* Maybe enter the JTAG TAP_RESET state ...
731 * - using only TMS, TCK, and the JTAG state machine
732 * - or else more directly, using TRST
734 * TAP_RESET should be invisible to non-debug parts of the system.
737 LOG_DEBUG("JTAG reset with TLR instead of TRST");
740 } else if (jtag_trst
!= new_trst
) {
741 jtag_trst
= new_trst
;
743 LOG_DEBUG("TRST line asserted");
744 tap_set_state(TAP_RESET
);
745 if (jtag_ntrst_assert_width
)
746 jtag_add_sleep(jtag_ntrst_assert_width
* 1000);
748 LOG_DEBUG("TRST line released");
749 if (jtag_ntrst_delay
)
750 jtag_add_sleep(jtag_ntrst_delay
* 1000);
752 /* We just asserted nTRST, so we're now in TAP_RESET.
753 * Inform possible listeners about this, now that
754 * JTAG instructions and data can be shifted. This
755 * sequence must match jtag_add_tlr().
757 jtag_call_event_callbacks(JTAG_TRST_ASSERTED
);
758 jtag_notify_event(JTAG_TRST_ASSERTED
);
763 void jtag_add_sleep(uint32_t us
)
765 /** @todo Here, keep_alive() appears to be a layering violation!!! */
767 jtag_set_error(interface_jtag_add_sleep(us
));
770 static int jtag_check_value_inner(uint8_t *captured
, uint8_t *in_check_value
,
771 uint8_t *in_check_mask
, int num_bits
)
773 int retval
= ERROR_OK
;
777 compare_failed
= buf_cmp_mask(captured
, in_check_value
, in_check_mask
, num_bits
);
779 compare_failed
= buf_cmp(captured
, in_check_value
, num_bits
);
781 if (compare_failed
) {
782 char *captured_str
, *in_check_value_str
;
783 int bits
= (num_bits
> DEBUG_JTAG_IOZ
) ? DEBUG_JTAG_IOZ
: num_bits
;
785 /* NOTE: we've lost diagnostic context here -- 'which tap' */
787 captured_str
= buf_to_str(captured
, bits
, 16);
788 in_check_value_str
= buf_to_str(in_check_value
, bits
, 16);
790 LOG_WARNING("Bad value '%s' captured during DR or IR scan:",
792 LOG_WARNING(" check_value: 0x%s", in_check_value_str
);
795 free(in_check_value_str
);
798 char *in_check_mask_str
;
800 in_check_mask_str
= buf_to_str(in_check_mask
, bits
, 16);
801 LOG_WARNING(" check_mask: 0x%s", in_check_mask_str
);
802 free(in_check_mask_str
);
805 retval
= ERROR_JTAG_QUEUE_FAILED
;
810 void jtag_check_value_mask(struct scan_field
*field
, uint8_t *value
, uint8_t *mask
)
812 assert(field
->in_value
!= NULL
);
815 /* no checking to do */
819 jtag_execute_queue_noclear();
821 int retval
= jtag_check_value_inner(field
->in_value
, value
, mask
, field
->num_bits
);
822 jtag_set_error(retval
);
825 int default_interface_jtag_execute_queue(void)
828 LOG_ERROR("No JTAG interface configured yet. "
829 "Issue 'init' command in startup scripts "
830 "before communicating with targets.");
834 return jtag
->execute_queue();
837 void jtag_execute_queue_noclear(void)
839 jtag_flush_queue_count
++;
840 jtag_set_error(interface_jtag_execute_queue());
842 if (jtag_flush_queue_sleep
> 0) {
843 /* For debug purposes it can be useful to test performance
844 * or behavior when delaying after flushing the queue,
845 * e.g. to simulate long roundtrip times.
847 usleep(jtag_flush_queue_sleep
* 1000);
851 int jtag_get_flush_queue_count(void)
853 return jtag_flush_queue_count
;
856 int jtag_execute_queue(void)
858 jtag_execute_queue_noclear();
859 return jtag_error_clear();
862 static int jtag_reset_callback(enum jtag_event event
, void *priv
)
864 struct jtag_tap
*tap
= priv
;
866 if (event
== JTAG_TRST_ASSERTED
) {
867 tap
->enabled
= !tap
->disabled_after_reset
;
869 /* current instruction is either BYPASS or IDCODE */
870 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
877 /* sleep at least us microseconds. When we sleep more than 1000ms we
878 * do an alive sleep, i.e. keep GDB alive. Note that we could starve
879 * GDB if we slept for <1000ms many times.
881 void jtag_sleep(uint32_t us
)
886 alive_sleep((us
+999)/1000);
889 #define JTAG_MAX_AUTO_TAPS 20
891 #define EXTRACT_MFG(X) (((X) & 0xffe) >> 1)
892 #define EXTRACT_PART(X) (((X) & 0xffff000) >> 12)
893 #define EXTRACT_VER(X) (((X) & 0xf0000000) >> 28)
895 /* A reserved manufacturer ID is used in END_OF_CHAIN_FLAG, so we
896 * know that no valid TAP will have it as an IDCODE value.
898 #define END_OF_CHAIN_FLAG 0xffffffff
900 /* a larger IR length than we ever expect to autoprobe */
901 #define JTAG_IRLEN_MAX 60
903 static int jtag_examine_chain_execute(uint8_t *idcode_buffer
, unsigned num_idcode
)
905 struct scan_field field
= {
906 .num_bits
= num_idcode
* 32,
907 .out_value
= idcode_buffer
,
908 .in_value
= idcode_buffer
,
911 /* initialize to the end of chain ID value */
912 for (unsigned i
= 0; i
< num_idcode
; i
++)
913 buf_set_u32(idcode_buffer
, i
* 32, 32, END_OF_CHAIN_FLAG
);
915 jtag_add_plain_dr_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_DRPAUSE
);
917 return jtag_execute_queue();
920 static bool jtag_examine_chain_check(uint8_t *idcodes
, unsigned count
)
922 uint8_t zero_check
= 0x0;
923 uint8_t one_check
= 0xff;
925 for (unsigned i
= 0; i
< count
* 4; i
++) {
926 zero_check
|= idcodes
[i
];
927 one_check
&= idcodes
[i
];
930 /* if there wasn't a single non-zero bit or if all bits were one,
931 * the scan is not valid. We wrote a mix of both values; either
933 * - There's a hardware issue (almost certainly):
934 * + all-zeroes can mean a target stuck in JTAG reset
935 * + all-ones tends to mean no target
936 * - The scan chain is WAY longer than we can handle, *AND* either
937 * + there are several hundreds of TAPs in bypass, or
938 * + at least a few dozen TAPs all have an all-ones IDCODE
940 if (zero_check
== 0x00 || one_check
== 0xff) {
941 LOG_ERROR("JTAG scan chain interrogation failed: all %s",
942 (zero_check
== 0x00) ? "zeroes" : "ones");
943 LOG_ERROR("Check JTAG interface, timings, target power, etc.");
949 static void jtag_examine_chain_display(enum log_levels level
, const char *msg
,
950 const char *name
, uint32_t idcode
)
952 log_printf_lf(level
, __FILE__
, __LINE__
, __func__
,
953 "JTAG tap: %s %16.16s: 0x%08x "
954 "(mfg: 0x%3.3x, part: 0x%4.4x, ver: 0x%1.1x)",
956 (unsigned int)idcode
,
957 (unsigned int)EXTRACT_MFG(idcode
),
958 (unsigned int)EXTRACT_PART(idcode
),
959 (unsigned int)EXTRACT_VER(idcode
));
962 static bool jtag_idcode_is_final(uint32_t idcode
)
965 * Some devices, such as AVR8, will output all 1's instead
966 * of TDI input value at end of chain. Allow those values
967 * instead of failing.
969 return idcode
== END_OF_CHAIN_FLAG
;
973 * This helper checks that remaining bits in the examined chain data are
974 * all as expected, but a single JTAG device requires only 64 bits to be
975 * read back correctly. This can help identify and diagnose problems
976 * with the JTAG chain earlier, gives more helpful/explicit error messages.
977 * Returns TRUE iff garbage was found.
979 static bool jtag_examine_chain_end(uint8_t *idcodes
, unsigned count
, unsigned max
)
981 bool triggered
= false;
982 for (; count
< max
- 31; count
+= 32) {
983 uint32_t idcode
= buf_get_u32(idcodes
, count
, 32);
985 /* do not trigger the warning if the data looks good */
986 if (jtag_idcode_is_final(idcode
))
988 LOG_WARNING("Unexpected idcode after end of chain: %d 0x%08x",
989 count
, (unsigned int)idcode
);
995 static bool jtag_examine_chain_match_tap(const struct jtag_tap
*tap
)
998 if (tap
->expected_ids_cnt
== 0 || !tap
->hasidcode
)
1001 /* optionally ignore the JTAG version field - bits 28-31 of IDCODE */
1002 uint32_t mask
= tap
->ignore_version
? ~(0xf << 28) : ~0;
1003 uint32_t idcode
= tap
->idcode
& mask
;
1005 /* Loop over the expected identification codes and test for a match */
1006 for (unsigned ii
= 0; ii
< tap
->expected_ids_cnt
; ii
++) {
1007 uint32_t expected
= tap
->expected_ids
[ii
] & mask
;
1009 if (idcode
== expected
)
1012 /* treat "-expected-id 0" as a "don't-warn" wildcard */
1013 if (0 == tap
->expected_ids
[ii
])
1017 /* If none of the expected ids matched, warn */
1018 jtag_examine_chain_display(LOG_LVL_WARNING
, "UNEXPECTED",
1019 tap
->dotted_name
, tap
->idcode
);
1020 for (unsigned ii
= 0; ii
< tap
->expected_ids_cnt
; ii
++) {
1023 snprintf(msg
, sizeof(msg
), "expected %u of %u", ii
+ 1, tap
->expected_ids_cnt
);
1024 jtag_examine_chain_display(LOG_LVL_ERROR
, msg
,
1025 tap
->dotted_name
, tap
->expected_ids
[ii
]);
1030 /* Try to examine chain layout according to IEEE 1149.1 §12
1031 * This is called a "blind interrogation" of the scan chain.
1033 static int jtag_examine_chain(void)
1036 unsigned max_taps
= jtag_tap_count();
1038 /* Autoprobe up to this many. */
1039 if (max_taps
< JTAG_MAX_AUTO_TAPS
)
1040 max_taps
= JTAG_MAX_AUTO_TAPS
;
1042 /* Add room for end-of-chain marker. */
1045 uint8_t *idcode_buffer
= malloc(max_taps
* 4);
1046 if (idcode_buffer
== NULL
)
1047 return ERROR_JTAG_INIT_FAILED
;
1049 /* DR scan to collect BYPASS or IDCODE register contents.
1050 * Then make sure the scan data has both ones and zeroes.
1052 LOG_DEBUG("DR scan interrogation for IDCODE/BYPASS");
1053 retval
= jtag_examine_chain_execute(idcode_buffer
, max_taps
);
1054 if (retval
!= ERROR_OK
)
1056 if (!jtag_examine_chain_check(idcode_buffer
, max_taps
)) {
1057 retval
= ERROR_JTAG_INIT_FAILED
;
1061 /* Point at the 1st predefined tap, if any */
1062 struct jtag_tap
*tap
= jtag_tap_next_enabled(NULL
);
1064 unsigned bit_count
= 0;
1065 unsigned autocount
= 0;
1066 for (unsigned i
= 0; i
< max_taps
; i
++) {
1067 assert(bit_count
< max_taps
* 32);
1068 uint32_t idcode
= buf_get_u32(idcode_buffer
, bit_count
, 32);
1070 /* No predefined TAP? Auto-probe. */
1072 /* Is there another TAP? */
1073 if (jtag_idcode_is_final(idcode
))
1076 /* Default everything in this TAP except IR length.
1078 * REVISIT create a jtag_alloc(chip, tap) routine, and
1079 * share it with jim_newtap_cmd().
1081 tap
= calloc(1, sizeof *tap
);
1083 retval
= ERROR_FAIL
;
1087 tap
->chip
= alloc_printf("auto%u", autocount
++);
1088 tap
->tapname
= strdup("tap");
1089 tap
->dotted_name
= alloc_printf("%s.%s", tap
->chip
, tap
->tapname
);
1091 tap
->ir_length
= 0; /* ... signifying irlen autoprobe */
1092 tap
->ir_capture_mask
= 0x03;
1093 tap
->ir_capture_value
= 0x01;
1095 tap
->enabled
= true;
1100 if ((idcode
& 1) == 0) {
1101 /* Zero for LSB indicates a device in bypass */
1102 LOG_INFO("TAP %s does not have IDCODE", tap
->dotted_name
);
1103 tap
->hasidcode
= false;
1108 /* Friendly devices support IDCODE */
1109 tap
->hasidcode
= true;
1110 tap
->idcode
= idcode
;
1111 jtag_examine_chain_display(LOG_LVL_INFO
, "tap/device found", tap
->dotted_name
, idcode
);
1116 /* ensure the TAP ID matches what was expected */
1117 if (!jtag_examine_chain_match_tap(tap
))
1118 retval
= ERROR_JTAG_INIT_SOFT_FAIL
;
1120 tap
= jtag_tap_next_enabled(tap
);
1123 /* After those IDCODE or BYPASS register values should be
1124 * only the data we fed into the scan chain.
1126 if (jtag_examine_chain_end(idcode_buffer
, bit_count
, max_taps
* 32)) {
1127 LOG_ERROR("double-check your JTAG setup (interface, speed, ...)");
1128 retval
= ERROR_JTAG_INIT_FAILED
;
1132 /* Return success or, for backwards compatibility if only
1133 * some IDCODE values mismatched, a soft/continuable fault.
1136 free(idcode_buffer
);
1141 * Validate the date loaded by entry to the Capture-IR state, to help
1142 * find errors related to scan chain configuration (wrong IR lengths)
1145 * Entry state can be anything. On non-error exit, all TAPs are in
1146 * bypass mode. On error exits, the scan chain is reset.
1148 static int jtag_validate_ircapture(void)
1150 struct jtag_tap
*tap
;
1151 int total_ir_length
= 0;
1152 uint8_t *ir_test
= NULL
;
1153 struct scan_field field
;
1158 /* when autoprobing, accomodate huge IR lengths */
1159 for (tap
= NULL
, total_ir_length
= 0;
1160 (tap
= jtag_tap_next_enabled(tap
)) != NULL
;
1161 total_ir_length
+= tap
->ir_length
) {
1162 if (tap
->ir_length
== 0)
1163 total_ir_length
+= JTAG_IRLEN_MAX
;
1166 /* increase length to add 2 bit sentinel after scan */
1167 total_ir_length
+= 2;
1169 ir_test
= malloc(DIV_ROUND_UP(total_ir_length
, 8));
1170 if (ir_test
== NULL
)
1173 /* after this scan, all TAPs will capture BYPASS instructions */
1174 buf_set_ones(ir_test
, total_ir_length
);
1176 field
.num_bits
= total_ir_length
;
1177 field
.out_value
= ir_test
;
1178 field
.in_value
= ir_test
;
1180 jtag_add_plain_ir_scan(field
.num_bits
, field
.out_value
, field
.in_value
, TAP_IDLE
);
1182 LOG_DEBUG("IR capture validation scan");
1183 retval
= jtag_execute_queue();
1184 if (retval
!= ERROR_OK
)
1191 tap
= jtag_tap_next_enabled(tap
);
1195 /* If we're autoprobing, guess IR lengths. They must be at
1196 * least two bits. Guessing will fail if (a) any TAP does
1197 * not conform to the JTAG spec; or (b) when the upper bits
1198 * captured from some conforming TAP are nonzero. Or if
1199 * (c) an IR length is longer than JTAG_IRLEN_MAX bits,
1200 * an implementation limit, which could someday be raised.
1202 * REVISIT optimization: if there's a *single* TAP we can
1203 * lift restrictions (a) and (b) by scanning a recognizable
1204 * pattern before the all-ones BYPASS. Check for where the
1205 * pattern starts in the result, instead of an 0...01 value.
1207 * REVISIT alternative approach: escape to some tcl code
1208 * which could provide more knowledge, based on IDCODE; and
1209 * only guess when that has no success.
1211 if (tap
->ir_length
== 0) {
1213 while ((val
= buf_get_u64(ir_test
, chain_pos
, tap
->ir_length
+ 1)) == 1
1214 && tap
->ir_length
< JTAG_IRLEN_MAX
) {
1217 LOG_WARNING("AUTO %s - use \"jtag newtap " "%s %s -irlen %d "
1218 "-expected-id 0x%08" PRIx32
"\"",
1219 tap
->dotted_name
, tap
->chip
, tap
->tapname
, tap
->ir_length
, tap
->idcode
);
1222 /* Validate the two LSBs, which must be 01 per JTAG spec.
1224 * Or ... more bits could be provided by TAP declaration.
1225 * Plus, some taps (notably in i.MX series chips) violate
1226 * this part of the JTAG spec, so their capture mask/value
1227 * attributes might disable this test.
1229 val
= buf_get_u64(ir_test
, chain_pos
, tap
->ir_length
);
1230 if ((val
& tap
->ir_capture_mask
) != tap
->ir_capture_value
) {
1231 LOG_ERROR("%s: IR capture error; saw 0x%0*" PRIx64
" not 0x%0*" PRIx32
,
1233 (tap
->ir_length
+ 7) / tap
->ir_length
, val
,
1234 (tap
->ir_length
+ 7) / tap
->ir_length
, tap
->ir_capture_value
);
1236 retval
= ERROR_JTAG_INIT_FAILED
;
1239 LOG_DEBUG("%s: IR capture 0x%0*" PRIx64
, jtag_tap_name(tap
),
1240 (tap
->ir_length
+ 7) / tap
->ir_length
, val
);
1241 chain_pos
+= tap
->ir_length
;
1244 /* verify the '11' sentinel we wrote is returned at the end */
1245 val
= buf_get_u64(ir_test
, chain_pos
, 2);
1247 char *cbuf
= buf_to_str(ir_test
, total_ir_length
, 16);
1249 LOG_ERROR("IR capture error at bit %d, saw 0x%s not 0x...3",
1252 retval
= ERROR_JTAG_INIT_FAILED
;
1257 if (retval
!= ERROR_OK
) {
1259 jtag_execute_queue();
1264 void jtag_tap_init(struct jtag_tap
*tap
)
1266 unsigned ir_len_bits
;
1267 unsigned ir_len_bytes
;
1269 /* if we're autoprobing, cope with potentially huge ir_length */
1270 ir_len_bits
= tap
->ir_length
? : JTAG_IRLEN_MAX
;
1271 ir_len_bytes
= DIV_ROUND_UP(ir_len_bits
, 8);
1273 tap
->expected
= calloc(1, ir_len_bytes
);
1274 tap
->expected_mask
= calloc(1, ir_len_bytes
);
1275 tap
->cur_instr
= malloc(ir_len_bytes
);
1277 /** @todo cope better with ir_length bigger than 32 bits */
1278 if (ir_len_bits
> 32)
1281 buf_set_u32(tap
->expected
, 0, ir_len_bits
, tap
->ir_capture_value
);
1282 buf_set_u32(tap
->expected_mask
, 0, ir_len_bits
, tap
->ir_capture_mask
);
1284 /* TAP will be in bypass mode after jtag_validate_ircapture() */
1286 buf_set_ones(tap
->cur_instr
, tap
->ir_length
);
1288 /* register the reset callback for the TAP */
1289 jtag_register_event_callback(&jtag_reset_callback
, tap
);
1292 LOG_DEBUG("Created Tap: %s @ abs position %d, "
1293 "irlen %d, capture: 0x%x mask: 0x%x", tap
->dotted_name
,
1294 tap
->abs_chain_position
, tap
->ir_length
,
1295 (unsigned) tap
->ir_capture_value
,
1296 (unsigned) tap
->ir_capture_mask
);
1299 void jtag_tap_free(struct jtag_tap
*tap
)
1301 jtag_unregister_event_callback(&jtag_reset_callback
, tap
);
1303 free(tap
->expected
);
1304 free(tap
->expected_mask
);
1305 free(tap
->expected_ids
);
1306 free(tap
->cur_instr
);
1309 free(tap
->dotted_name
);
1314 * Do low-level setup like initializing registers, output signals,
1317 int adapter_init(struct command_context
*cmd_ctx
)
1322 if (!jtag_interface
) {
1323 /* nothing was previously specified by "interface" command */
1324 LOG_ERROR("Debug Adapter has to be specified, "
1325 "see \"interface\" command");
1326 return ERROR_JTAG_INVALID_INTERFACE
;
1330 retval
= jtag_interface
->init();
1331 if (retval
!= ERROR_OK
)
1333 jtag
= jtag_interface
;
1335 /* LEGACY SUPPORT ... adapter drivers must declare what
1336 * transports they allow. Until they all do so, assume
1337 * the legacy drivers are JTAG-only
1339 if (!transports_are_declared()) {
1340 LOG_ERROR("Adapter driver '%s' did not declare "
1341 "which transports it allows; assuming "
1342 "JTAG-only", jtag
->name
);
1343 retval
= allow_transports(cmd_ctx
, jtag_only
);
1344 if (retval
!= ERROR_OK
)
1348 if (jtag
->speed
== NULL
) {
1349 LOG_INFO("This adapter doesn't support configurable speed");
1353 if (CLOCK_MODE_UNSELECTED
== clock_mode
) {
1354 LOG_ERROR("An adapter speed is not selected in the init script."
1355 " Insert a call to adapter_khz or jtag_rclk to proceed.");
1356 return ERROR_JTAG_INIT_FAILED
;
1359 int requested_khz
= jtag_get_speed_khz();
1360 int actual_khz
= requested_khz
;
1361 int jtag_speed_var
= 0;
1362 retval
= jtag_get_speed(&jtag_speed_var
);
1363 if (retval
!= ERROR_OK
)
1365 retval
= jtag
->speed(jtag_speed_var
);
1366 if (retval
!= ERROR_OK
)
1368 retval
= jtag_get_speed_readable(&actual_khz
);
1369 if (ERROR_OK
!= retval
)
1370 LOG_INFO("adapter-specific clock speed value %d", jtag_speed_var
);
1371 else if (actual_khz
) {
1372 /* Adaptive clocking -- JTAG-specific */
1373 if ((CLOCK_MODE_RCLK
== clock_mode
)
1374 || ((CLOCK_MODE_KHZ
== clock_mode
) && !requested_khz
)) {
1375 LOG_INFO("RCLK (adaptive clock speed) not supported - fallback to %d kHz"
1378 LOG_INFO("clock speed %d kHz", actual_khz
);
1380 LOG_INFO("RCLK (adaptive clock speed)");
1385 int jtag_init_inner(struct command_context
*cmd_ctx
)
1387 struct jtag_tap
*tap
;
1389 bool issue_setup
= true;
1391 LOG_DEBUG("Init JTAG chain");
1393 tap
= jtag_tap_next_enabled(NULL
);
1395 /* Once JTAG itself is properly set up, and the scan chain
1396 * isn't absurdly large, IDCODE autoprobe should work fine.
1398 * But ... IRLEN autoprobe can fail even on systems which
1399 * are fully conformant to JTAG. Also, JTAG setup can be
1400 * quite finicky on some systems.
1402 * REVISIT: if TAP autoprobe works OK, then in many cases
1403 * we could escape to tcl code and set up targets based on
1404 * the TAP's IDCODE values.
1406 LOG_WARNING("There are no enabled taps. "
1407 "AUTO PROBING MIGHT NOT WORK!!");
1409 /* REVISIT default clock will often be too fast ... */
1413 retval
= jtag_execute_queue();
1414 if (retval
!= ERROR_OK
)
1417 /* Examine DR values first. This discovers problems which will
1418 * prevent communication ... hardware issues like TDO stuck, or
1419 * configuring the wrong number of (enabled) TAPs.
1421 retval
= jtag_examine_chain();
1424 /* complete success */
1427 /* For backward compatibility reasons, try coping with
1428 * configuration errors involving only ID mismatches.
1429 * We might be able to talk to the devices.
1431 * Also the device might be powered down during startup.
1433 * After OpenOCD starts, we can try to power on the device
1436 LOG_ERROR("Trying to use configured scan chain anyway...");
1437 issue_setup
= false;
1441 /* Now look at IR values. Problems here will prevent real
1442 * communication. They mostly mean that the IR length is
1443 * wrong ... or that the IR capture value is wrong. (The
1444 * latter is uncommon, but easily worked around: provide
1445 * ircapture/irmask values during TAP setup.)
1447 retval
= jtag_validate_ircapture();
1448 if (retval
!= ERROR_OK
) {
1449 /* The target might be powered down. The user
1450 * can power it up and reset it after firing
1453 issue_setup
= false;
1457 jtag_notify_event(JTAG_TAP_EVENT_SETUP
);
1459 LOG_WARNING("Bypassing JTAG setup events due to errors");
1465 int adapter_quit(void)
1467 if (!jtag
|| !jtag
->quit
)
1470 /* close the JTAG interface */
1471 int result
= jtag
->quit();
1472 if (ERROR_OK
!= result
)
1473 LOG_ERROR("failed: %d", result
);
1478 int swd_init_reset(struct command_context
*cmd_ctx
)
1480 int retval
= adapter_init(cmd_ctx
);
1481 if (retval
!= ERROR_OK
)
1484 LOG_DEBUG("Initializing with hard SRST reset");
1486 if (jtag_reset_config
& RESET_HAS_SRST
)
1489 retval
= jtag_execute_queue();
1493 int jtag_init_reset(struct command_context
*cmd_ctx
)
1495 int retval
= adapter_init(cmd_ctx
);
1496 if (retval
!= ERROR_OK
)
1499 LOG_DEBUG("Initializing with hard TRST+SRST reset");
1502 * This procedure is used by default when OpenOCD triggers a reset.
1503 * It's now done through an overridable Tcl "init_reset" wrapper.
1505 * This started out as a more powerful "get JTAG working" reset than
1506 * jtag_init_inner(), applying TRST because some chips won't activate
1507 * JTAG without a TRST cycle (presumed to be async, though some of
1508 * those chips synchronize JTAG activation using TCK).
1510 * But some chips only activate JTAG as part of an SRST cycle; SRST
1511 * got mixed in. So it became a hard reset routine, which got used
1512 * in more places, and which coped with JTAG reset being forced as
1513 * part of SRST (srst_pulls_trst).
1515 * And even more corner cases started to surface: TRST and/or SRST
1516 * assertion timings matter; some chips need other JTAG operations;
1517 * TRST/SRST sequences can need to be different from these, etc.
1519 * Systems should override that wrapper to support system-specific
1520 * requirements that this not-fully-generic code doesn't handle.
1522 * REVISIT once Tcl code can read the reset_config modes, this won't
1523 * need to be a C routine at all...
1525 if (jtag_reset_config
& RESET_HAS_SRST
) {
1526 jtag_add_reset(1, 1);
1527 if ((jtag_reset_config
& RESET_SRST_PULLS_TRST
) == 0)
1528 jtag_add_reset(0, 1);
1530 jtag_add_reset(1, 0); /* TAP_RESET, using TMS+TCK or TRST */
1533 /* some targets enable us to connect with srst asserted */
1534 if (jtag_reset_config
& RESET_CNCT_UNDER_SRST
) {
1535 if (jtag_reset_config
& RESET_SRST_NO_GATING
)
1536 jtag_add_reset(0, 1);
1538 LOG_WARNING("\'srst_nogate\' reset_config option is required");
1539 jtag_add_reset(0, 0);
1542 jtag_add_reset(0, 0);
1543 retval
= jtag_execute_queue();
1544 if (retval
!= ERROR_OK
)
1547 /* Check that we can communication on the JTAG chain + eventually we want to
1548 * be able to perform enumeration only after OpenOCD has started
1549 * telnet and GDB server
1551 * That would allow users to more easily perform any magic they need to before
1554 return jtag_init_inner(cmd_ctx
);
1557 int jtag_init(struct command_context
*cmd_ctx
)
1559 int retval
= adapter_init(cmd_ctx
);
1560 if (retval
!= ERROR_OK
)
1563 /* guard against oddball hardware: force resets to be inactive */
1564 jtag_add_reset(0, 0);
1566 /* some targets enable us to connect with srst asserted */
1567 if (jtag_reset_config
& RESET_CNCT_UNDER_SRST
) {
1568 if (jtag_reset_config
& RESET_SRST_NO_GATING
)
1569 jtag_add_reset(0, 1);
1571 LOG_WARNING("\'srst_nogate\' reset_config option is required");
1573 retval
= jtag_execute_queue();
1574 if (retval
!= ERROR_OK
)
1577 if (Jim_Eval_Named(cmd_ctx
->interp
, "jtag_init", __FILE__
, __LINE__
) != JIM_OK
)
1583 unsigned jtag_get_speed_khz(void)
1588 static int adapter_khz_to_speed(unsigned khz
, int *speed
)
1590 LOG_DEBUG("convert khz to interface specific speed value");
1593 LOG_DEBUG("have interface set up");
1595 int retval
= jtag
->khz(jtag_get_speed_khz(), &speed_div1
);
1596 if (ERROR_OK
!= retval
)
1598 *speed
= speed_div1
;
1603 static int jtag_rclk_to_speed(unsigned fallback_speed_khz
, int *speed
)
1605 int retval
= adapter_khz_to_speed(0, speed
);
1606 if ((ERROR_OK
!= retval
) && fallback_speed_khz
) {
1607 LOG_DEBUG("trying fallback speed...");
1608 retval
= adapter_khz_to_speed(fallback_speed_khz
, speed
);
1613 static int jtag_set_speed(int speed
)
1616 /* this command can be called during CONFIG,
1617 * in which case jtag isn't initialized */
1618 return jtag
? jtag
->speed(speed
) : ERROR_OK
;
1621 int jtag_config_khz(unsigned khz
)
1623 LOG_DEBUG("handle jtag khz");
1624 clock_mode
= CLOCK_MODE_KHZ
;
1626 int retval
= adapter_khz_to_speed(khz
, &speed
);
1627 return (ERROR_OK
!= retval
) ? retval
: jtag_set_speed(speed
);
1630 int jtag_config_rclk(unsigned fallback_speed_khz
)
1632 LOG_DEBUG("handle jtag rclk");
1633 clock_mode
= CLOCK_MODE_RCLK
;
1634 rclk_fallback_speed_khz
= fallback_speed_khz
;
1636 int retval
= jtag_rclk_to_speed(fallback_speed_khz
, &speed
);
1637 return (ERROR_OK
!= retval
) ? retval
: jtag_set_speed(speed
);
1640 int jtag_get_speed(int *speed
)
1642 switch (clock_mode
) {
1643 case CLOCK_MODE_KHZ
:
1644 adapter_khz_to_speed(jtag_get_speed_khz(), speed
);
1646 case CLOCK_MODE_RCLK
:
1647 jtag_rclk_to_speed(rclk_fallback_speed_khz
, speed
);
1650 LOG_ERROR("BUG: unknown jtag clock mode");
1656 int jtag_get_speed_readable(int *khz
)
1658 int jtag_speed_var
= 0;
1659 int retval
= jtag_get_speed(&jtag_speed_var
);
1660 if (retval
!= ERROR_OK
)
1662 return jtag
? jtag
->speed_div(jtag_speed_var
, khz
) : ERROR_OK
;
1665 void jtag_set_verify(bool enable
)
1667 jtag_verify
= enable
;
1670 bool jtag_will_verify()
1675 void jtag_set_verify_capture_ir(bool enable
)
1677 jtag_verify_capture_ir
= enable
;
1680 bool jtag_will_verify_capture_ir()
1682 return jtag_verify_capture_ir
;
1685 int jtag_power_dropout(int *dropout
)
1688 /* TODO: as the jtag interface is not valid all
1689 * we can do at the moment is exit OpenOCD */
1690 LOG_ERROR("No Valid JTAG Interface Configured.");
1693 return jtag
->power_dropout(dropout
);
1696 int jtag_srst_asserted(int *srst_asserted
)
1698 return jtag
->srst_asserted(srst_asserted
);
1701 enum reset_types
jtag_get_reset_config(void)
1703 return jtag_reset_config
;
1705 void jtag_set_reset_config(enum reset_types type
)
1707 jtag_reset_config
= type
;
1710 int jtag_get_trst(void)
1714 int jtag_get_srst(void)
1719 void jtag_set_nsrst_delay(unsigned delay
)
1721 adapter_nsrst_delay
= delay
;
1723 unsigned jtag_get_nsrst_delay(void)
1725 return adapter_nsrst_delay
;
1727 void jtag_set_ntrst_delay(unsigned delay
)
1729 jtag_ntrst_delay
= delay
;
1731 unsigned jtag_get_ntrst_delay(void)
1733 return jtag_ntrst_delay
;
1737 void jtag_set_nsrst_assert_width(unsigned delay
)
1739 adapter_nsrst_assert_width
= delay
;
1741 unsigned jtag_get_nsrst_assert_width(void)
1743 return adapter_nsrst_assert_width
;
1745 void jtag_set_ntrst_assert_width(unsigned delay
)
1747 jtag_ntrst_assert_width
= delay
;
1749 unsigned jtag_get_ntrst_assert_width(void)
1751 return jtag_ntrst_assert_width
;
1754 static int jtag_select(struct command_context
*ctx
)
1758 /* NOTE: interface init must already have been done.
1759 * That works with only C code ... no Tcl glue required.
1762 retval
= jtag_register_commands(ctx
);
1764 if (retval
!= ERROR_OK
)
1767 retval
= svf_register_commands(ctx
);
1769 if (retval
!= ERROR_OK
)
1772 return xsvf_register_commands(ctx
);
1775 static struct transport jtag_transport
= {
1777 .select
= jtag_select
,
1781 static void jtag_constructor(void) __attribute__((constructor
));
1782 static void jtag_constructor(void)
1784 transport_register(&jtag_transport
);
1787 /** Returns true if the current debug session
1788 * is using JTAG as its transport.
1790 bool transport_is_jtag(void)
1792 return get_current_transport() == &jtag_transport
;
1795 void adapter_assert_reset(void)
1797 if (transport_is_jtag()) {
1798 if (jtag_reset_config
& RESET_SRST_PULLS_TRST
)
1799 jtag_add_reset(1, 1);
1801 jtag_add_reset(0, 1);
1802 } else if (transport_is_swd())
1804 else if (transport_is_cmsis_dap())
1805 swd_add_reset(1); /* FIXME */
1806 else if (get_current_transport() != NULL
)
1807 LOG_ERROR("reset is not supported on %s",
1808 get_current_transport()->name
);
1810 LOG_ERROR("transport is not selected");
1813 void adapter_deassert_reset(void)
1815 if (transport_is_jtag())
1816 jtag_add_reset(0, 0);
1817 else if (transport_is_swd())
1819 else if (transport_is_cmsis_dap())
1820 swd_add_reset(0); /* FIXME */
1821 else if (get_current_transport() != NULL
)
1822 LOG_ERROR("reset is not supported on %s",
1823 get_current_transport()->name
);
1825 LOG_ERROR("transport is not selected");
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)