1 /***************************************************************************
2 * Copyright (C) 2006 by Magnus Lundin *
5 * Copyright (C) 2008 by Spencer Oliver *
6 * spen@spen-soft.co.uk *
8 * Copyright (C) 2009-2010 by Oyvind Harboe *
9 * oyvind.harboe@zylin.com *
11 * Copyright (C) 2009-2010 by David Brownell *
13 * Copyright (C) 2013 by Andreas Fritiofson *
14 * andreas.fritiofson@gmail.com *
16 * Copyright (C) 2019-2021, Ampere Computing LLC *
18 * This program is free software; you can redistribute it and/or modify *
19 * it under the terms of the GNU General Public License as published by *
20 * the Free Software Foundation; either version 2 of the License, or *
21 * (at your option) any later version. *
23 * This program is distributed in the hope that it will be useful, *
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
26 * GNU General Public License for more details. *
28 * You should have received a copy of the GNU General Public License *
29 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
30 ***************************************************************************/
34 * This file implements support for the ARM Debug Interface version 5 (ADIv5)
35 * debugging architecture. Compared with previous versions, this includes
36 * a low pin-count Serial Wire Debug (SWD) alternative to JTAG for message
37 * transport, and focuses on memory mapped resources as defined by the
38 * CoreSight architecture.
40 * A key concept in ADIv5 is the Debug Access Port, or DAP. A DAP has two
41 * basic components: a Debug Port (DP) transporting messages to and from a
42 * debugger, and an Access Port (AP) accessing resources. Three types of DP
43 * are defined. One uses only JTAG for communication, and is called JTAG-DP.
44 * One uses only SWD for communication, and is called SW-DP. The third can
45 * use either SWD or JTAG, and is called SWJ-DP. The most common type of AP
46 * is used to access memory mapped resources and is called a MEM-AP. Also a
47 * JTAG-AP is also defined, bridging to JTAG resources; those are uncommon.
49 * This programming interface allows DAP pipelined operations through a
50 * transaction queue. This primarily affects AP operations (such as using
51 * a MEM-AP to access memory or registers). If the current transaction has
52 * not finished by the time the next one must begin, and the ORUNDETECT bit
53 * is set in the DP_CTRL_STAT register, the SSTICKYORUN status is set and
54 * further AP operations will fail. There are two basic methods to avoid
55 * such overrun errors. One involves polling for status instead of using
56 * transaction pipelining. The other involves adding delays to ensure the
57 * AP has enough time to complete one operation before starting the next
58 * one. (For JTAG these delays are controlled by memaccess_tck.)
62 * Relevant specifications from ARM include:
64 * ARM(tm) Debug Interface v5 Architecture Specification ARM IHI 0031E
65 * CoreSight(tm) v1.0 Architecture Specification ARM IHI 0029B
67 * CoreSight(tm) DAP-Lite TRM, ARM DDI 0316D
68 * Cortex-M3(tm) TRM, ARM DDI 0337G
75 #include "jtag/interface.h"
77 #include "arm_adi_v5.h"
78 #include "arm_coresight.h"
80 #include "transport/transport.h"
81 #include <helper/align.h>
82 #include <helper/jep106.h>
83 #include <helper/time_support.h>
84 #include <helper/list.h>
85 #include <helper/jim-nvp.h>
87 /* ARM ADI Specification requires at least 10 bits used for TAR autoincrement */
90 uint32_t tar_block_size(uint32_t address)
91 Return the largest block starting at address that does not cross a tar block size alignment boundary
93 static uint32_t max_tar_block_size(uint32_t tar_autoincr_block
, target_addr_t address
)
95 return tar_autoincr_block
- ((tar_autoincr_block
- 1) & address
);
98 /***************************************************************************
100 * DP and MEM-AP register access through APACC and DPACC *
102 ***************************************************************************/
104 static int mem_ap_setup_csw(struct adiv5_ap
*ap
, uint32_t csw
)
106 csw
|= ap
->csw_default
;
108 if (csw
!= ap
->csw_value
) {
109 /* LOG_DEBUG("DAP: Set CSW %x",csw); */
110 int retval
= dap_queue_ap_write(ap
, MEM_AP_REG_CSW
, csw
);
111 if (retval
!= ERROR_OK
) {
120 static int mem_ap_setup_tar(struct adiv5_ap
*ap
, target_addr_t tar
)
122 if (!ap
->tar_valid
|| tar
!= ap
->tar_value
) {
123 /* LOG_DEBUG("DAP: Set TAR %x",tar); */
124 int retval
= dap_queue_ap_write(ap
, MEM_AP_REG_TAR
, (uint32_t)(tar
& 0xffffffffUL
));
125 if (retval
== ERROR_OK
&& is_64bit_ap(ap
)) {
126 /* See if bits 63:32 of tar is different from last setting */
127 if ((ap
->tar_value
>> 32) != (tar
>> 32))
128 retval
= dap_queue_ap_write(ap
, MEM_AP_REG_TAR64
, (uint32_t)(tar
>> 32));
130 if (retval
!= ERROR_OK
) {
131 ap
->tar_valid
= false;
135 ap
->tar_valid
= true;
140 static int mem_ap_read_tar(struct adiv5_ap
*ap
, target_addr_t
*tar
)
145 int retval
= dap_queue_ap_read(ap
, MEM_AP_REG_TAR
, &lower
);
146 if (retval
== ERROR_OK
&& is_64bit_ap(ap
))
147 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_TAR64
, &upper
);
149 if (retval
!= ERROR_OK
) {
150 ap
->tar_valid
= false;
154 retval
= dap_run(ap
->dap
);
155 if (retval
!= ERROR_OK
) {
156 ap
->tar_valid
= false;
160 *tar
= (((target_addr_t
)upper
) << 32) | (target_addr_t
)lower
;
162 ap
->tar_value
= *tar
;
163 ap
->tar_valid
= true;
167 static uint32_t mem_ap_get_tar_increment(struct adiv5_ap
*ap
)
169 switch (ap
->csw_value
& CSW_ADDRINC_MASK
) {
170 case CSW_ADDRINC_SINGLE
:
171 switch (ap
->csw_value
& CSW_SIZE_MASK
) {
181 case CSW_ADDRINC_PACKED
:
187 /* mem_ap_update_tar_cache is called after an access to MEM_AP_REG_DRW
189 static void mem_ap_update_tar_cache(struct adiv5_ap
*ap
)
194 uint32_t inc
= mem_ap_get_tar_increment(ap
);
195 if (inc
>= max_tar_block_size(ap
->tar_autoincr_block
, ap
->tar_value
))
196 ap
->tar_valid
= false;
198 ap
->tar_value
+= inc
;
202 * Queue transactions setting up transfer parameters for the
203 * currently selected MEM-AP.
205 * Subsequent transfers using registers like MEM_AP_REG_DRW or MEM_AP_REG_BD2
206 * initiate data reads or writes using memory or peripheral addresses.
207 * If the CSW is configured for it, the TAR may be automatically
208 * incremented after each transfer.
210 * @param ap The MEM-AP.
211 * @param csw MEM-AP Control/Status Word (CSW) register to assign. If this
212 * matches the cached value, the register is not changed.
213 * @param tar MEM-AP Transfer Address Register (TAR) to assign. If this
214 * matches the cached address, the register is not changed.
216 * @return ERROR_OK if the transaction was properly queued, else a fault code.
218 static int mem_ap_setup_transfer(struct adiv5_ap
*ap
, uint32_t csw
, target_addr_t tar
)
221 retval
= mem_ap_setup_csw(ap
, csw
);
222 if (retval
!= ERROR_OK
)
224 retval
= mem_ap_setup_tar(ap
, tar
);
225 if (retval
!= ERROR_OK
)
231 * Asynchronous (queued) read of a word from memory or a system register.
233 * @param ap The MEM-AP to access.
234 * @param address Address of the 32-bit word to read; it must be
235 * readable by the currently selected MEM-AP.
236 * @param value points to where the word will be stored when the
237 * transaction queue is flushed (assuming no errors).
239 * @return ERROR_OK for success. Otherwise a fault code.
241 int mem_ap_read_u32(struct adiv5_ap
*ap
, target_addr_t address
,
246 /* Use banked addressing (REG_BDx) to avoid some link traffic
247 * (updating TAR) when reading several consecutive addresses.
249 retval
= mem_ap_setup_transfer(ap
,
250 CSW_32BIT
| (ap
->csw_value
& CSW_ADDRINC_MASK
),
251 address
& 0xFFFFFFFFFFFFFFF0ull
);
252 if (retval
!= ERROR_OK
)
255 return dap_queue_ap_read(ap
, MEM_AP_REG_BD0
| (address
& 0xC), value
);
259 * Synchronous read of a word from memory or a system register.
260 * As a side effect, this flushes any queued transactions.
262 * @param ap The MEM-AP to access.
263 * @param address Address of the 32-bit word to read; it must be
264 * readable by the currently selected MEM-AP.
265 * @param value points to where the result will be stored.
267 * @return ERROR_OK for success; *value holds the result.
268 * Otherwise a fault code.
270 int mem_ap_read_atomic_u32(struct adiv5_ap
*ap
, target_addr_t address
,
275 retval
= mem_ap_read_u32(ap
, address
, value
);
276 if (retval
!= ERROR_OK
)
279 return dap_run(ap
->dap
);
283 * Asynchronous (queued) write of a word to memory or a system register.
285 * @param ap The MEM-AP to access.
286 * @param address Address to be written; it must be writable by
287 * the currently selected MEM-AP.
288 * @param value Word that will be written to the address when transaction
289 * queue is flushed (assuming no errors).
291 * @return ERROR_OK for success. Otherwise a fault code.
293 int mem_ap_write_u32(struct adiv5_ap
*ap
, target_addr_t address
,
298 /* Use banked addressing (REG_BDx) to avoid some link traffic
299 * (updating TAR) when writing several consecutive addresses.
301 retval
= mem_ap_setup_transfer(ap
,
302 CSW_32BIT
| (ap
->csw_value
& CSW_ADDRINC_MASK
),
303 address
& 0xFFFFFFFFFFFFFFF0ull
);
304 if (retval
!= ERROR_OK
)
307 return dap_queue_ap_write(ap
, MEM_AP_REG_BD0
| (address
& 0xC),
312 * Synchronous write of a word to memory or a system register.
313 * As a side effect, this flushes any queued transactions.
315 * @param ap The MEM-AP to access.
316 * @param address Address to be written; it must be writable by
317 * the currently selected MEM-AP.
318 * @param value Word that will be written.
320 * @return ERROR_OK for success; the data was written. Otherwise a fault code.
322 int mem_ap_write_atomic_u32(struct adiv5_ap
*ap
, target_addr_t address
,
325 int retval
= mem_ap_write_u32(ap
, address
, value
);
327 if (retval
!= ERROR_OK
)
330 return dap_run(ap
->dap
);
334 * Synchronous write of a block of memory, using a specific access size.
336 * @param ap The MEM-AP to access.
337 * @param buffer The data buffer to write. No particular alignment is assumed.
338 * @param size Which access size to use, in bytes. 1, 2 or 4.
339 * @param count The number of writes to do (in size units, not bytes).
340 * @param address Address to be written; it must be writable by the currently selected MEM-AP.
341 * @param addrinc Whether the target address should be increased for each write or not. This
342 * should normally be true, except when writing to e.g. a FIFO.
343 * @return ERROR_OK on success, otherwise an error code.
345 static int mem_ap_write(struct adiv5_ap
*ap
, const uint8_t *buffer
, uint32_t size
, uint32_t count
,
346 target_addr_t address
, bool addrinc
)
348 struct adiv5_dap
*dap
= ap
->dap
;
349 size_t nbytes
= size
* count
;
350 const uint32_t csw_addrincr
= addrinc
? CSW_ADDRINC_SINGLE
: CSW_ADDRINC_OFF
;
352 target_addr_t addr_xor
;
353 int retval
= ERROR_OK
;
355 /* TI BE-32 Quirks mode:
356 * Writes on big-endian TMS570 behave very strangely. Observed behavior:
357 * size write address bytes written in order
358 * 4 TAR ^ 0 (val >> 24), (val >> 16), (val >> 8), (val)
359 * 2 TAR ^ 2 (val >> 8), (val)
361 * For example, if you attempt to write a single byte to address 0, the processor
362 * will actually write a byte to address 3.
364 * To make writes of size < 4 work as expected, we xor a value with the address before
365 * setting the TAP, and we set the TAP after every transfer rather then relying on
366 * address increment. */
369 csw_size
= CSW_32BIT
;
371 } else if (size
== 2) {
372 csw_size
= CSW_16BIT
;
373 addr_xor
= dap
->ti_be_32_quirks
? 2 : 0;
374 } else if (size
== 1) {
376 addr_xor
= dap
->ti_be_32_quirks
? 3 : 0;
378 return ERROR_TARGET_UNALIGNED_ACCESS
;
381 if (ap
->unaligned_access_bad
&& (address
% size
!= 0))
382 return ERROR_TARGET_UNALIGNED_ACCESS
;
385 uint32_t this_size
= size
;
387 /* Select packed transfer if possible */
388 if (addrinc
&& ap
->packed_transfers
&& nbytes
>= 4
389 && max_tar_block_size(ap
->tar_autoincr_block
, address
) >= 4) {
391 retval
= mem_ap_setup_csw(ap
, csw_size
| CSW_ADDRINC_PACKED
);
393 retval
= mem_ap_setup_csw(ap
, csw_size
| csw_addrincr
);
396 if (retval
!= ERROR_OK
)
399 retval
= mem_ap_setup_tar(ap
, address
^ addr_xor
);
400 if (retval
!= ERROR_OK
)
403 /* How many source bytes each transfer will consume, and their location in the DRW,
404 * depends on the type of transfer and alignment. See ARM document IHI0031C. */
405 uint32_t outvalue
= 0;
406 uint32_t drw_byte_idx
= address
;
407 if (dap
->ti_be_32_quirks
) {
410 outvalue
|= (uint32_t)*buffer
++ << 8 * (3 ^ (drw_byte_idx
++ & 3) ^ addr_xor
);
411 outvalue
|= (uint32_t)*buffer
++ << 8 * (3 ^ (drw_byte_idx
++ & 3) ^ addr_xor
);
412 outvalue
|= (uint32_t)*buffer
++ << 8 * (3 ^ (drw_byte_idx
++ & 3) ^ addr_xor
);
413 outvalue
|= (uint32_t)*buffer
++ << 8 * (3 ^ (drw_byte_idx
& 3) ^ addr_xor
);
416 outvalue
|= (uint32_t)*buffer
++ << 8 * (1 ^ (drw_byte_idx
++ & 3) ^ addr_xor
);
417 outvalue
|= (uint32_t)*buffer
++ << 8 * (1 ^ (drw_byte_idx
& 3) ^ addr_xor
);
420 outvalue
|= (uint32_t)*buffer
++ << 8 * (0 ^ (drw_byte_idx
& 3) ^ addr_xor
);
426 outvalue
|= (uint32_t)*buffer
++ << 8 * (drw_byte_idx
++ & 3);
427 outvalue
|= (uint32_t)*buffer
++ << 8 * (drw_byte_idx
++ & 3);
430 outvalue
|= (uint32_t)*buffer
++ << 8 * (drw_byte_idx
++ & 3);
433 outvalue
|= (uint32_t)*buffer
++ << 8 * (drw_byte_idx
& 3);
439 retval
= dap_queue_ap_write(ap
, MEM_AP_REG_DRW
, outvalue
);
440 if (retval
!= ERROR_OK
)
443 mem_ap_update_tar_cache(ap
);
445 address
+= this_size
;
448 /* REVISIT: Might want to have a queued version of this function that does not run. */
449 if (retval
== ERROR_OK
)
450 retval
= dap_run(dap
);
452 if (retval
!= ERROR_OK
) {
454 if (mem_ap_read_tar(ap
, &tar
) == ERROR_OK
)
455 LOG_ERROR("Failed to write memory at " TARGET_ADDR_FMT
, tar
);
457 LOG_ERROR("Failed to write memory and, additionally, failed to find out where");
464 * Synchronous read of a block of memory, using a specific access size.
466 * @param ap The MEM-AP to access.
467 * @param buffer The data buffer to receive the data. No particular alignment is assumed.
468 * @param size Which access size to use, in bytes. 1, 2 or 4.
469 * @param count The number of reads to do (in size units, not bytes).
470 * @param adr Address to be read; it must be readable by the currently selected MEM-AP.
471 * @param addrinc Whether the target address should be increased after each read or not. This
472 * should normally be true, except when reading from e.g. a FIFO.
473 * @return ERROR_OK on success, otherwise an error code.
475 static int mem_ap_read(struct adiv5_ap
*ap
, uint8_t *buffer
, uint32_t size
, uint32_t count
,
476 target_addr_t adr
, bool addrinc
)
478 struct adiv5_dap
*dap
= ap
->dap
;
479 size_t nbytes
= size
* count
;
480 const uint32_t csw_addrincr
= addrinc
? CSW_ADDRINC_SINGLE
: CSW_ADDRINC_OFF
;
482 target_addr_t address
= adr
;
483 int retval
= ERROR_OK
;
485 /* TI BE-32 Quirks mode:
486 * Reads on big-endian TMS570 behave strangely differently than writes.
487 * They read from the physical address requested, but with DRW byte-reversed.
488 * For example, a byte read from address 0 will place the result in the high bytes of DRW.
489 * Also, packed 8-bit and 16-bit transfers seem to sometimes return garbage in some bytes,
493 csw_size
= CSW_32BIT
;
495 csw_size
= CSW_16BIT
;
499 return ERROR_TARGET_UNALIGNED_ACCESS
;
501 if (ap
->unaligned_access_bad
&& (adr
% size
!= 0))
502 return ERROR_TARGET_UNALIGNED_ACCESS
;
504 /* Allocate buffer to hold the sequence of DRW reads that will be made. This is a significant
505 * over-allocation if packed transfers are going to be used, but determining the real need at
506 * this point would be messy. */
507 uint32_t *read_buf
= calloc(count
, sizeof(uint32_t));
508 /* Multiplication count * sizeof(uint32_t) may overflow, calloc() is safe */
509 uint32_t *read_ptr
= read_buf
;
511 LOG_ERROR("Failed to allocate read buffer");
515 /* Queue up all reads. Each read will store the entire DRW word in the read buffer. How many
516 * useful bytes it contains, and their location in the word, depends on the type of transfer
519 uint32_t this_size
= size
;
521 /* Select packed transfer if possible */
522 if (addrinc
&& ap
->packed_transfers
&& nbytes
>= 4
523 && max_tar_block_size(ap
->tar_autoincr_block
, address
) >= 4) {
525 retval
= mem_ap_setup_csw(ap
, csw_size
| CSW_ADDRINC_PACKED
);
527 retval
= mem_ap_setup_csw(ap
, csw_size
| csw_addrincr
);
529 if (retval
!= ERROR_OK
)
532 retval
= mem_ap_setup_tar(ap
, address
);
533 if (retval
!= ERROR_OK
)
536 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_DRW
, read_ptr
++);
537 if (retval
!= ERROR_OK
)
542 address
+= this_size
;
544 mem_ap_update_tar_cache(ap
);
547 if (retval
== ERROR_OK
)
548 retval
= dap_run(dap
);
552 nbytes
= size
* count
;
555 /* If something failed, read TAR to find out how much data was successfully read, so we can
556 * at least give the caller what we have. */
557 if (retval
!= ERROR_OK
) {
559 if (mem_ap_read_tar(ap
, &tar
) == ERROR_OK
) {
560 /* TAR is incremented after failed transfer on some devices (eg Cortex-M4) */
561 LOG_ERROR("Failed to read memory at " TARGET_ADDR_FMT
, tar
);
562 if (nbytes
> tar
- address
)
563 nbytes
= tar
- address
;
565 LOG_ERROR("Failed to read memory and, additionally, failed to find out where");
570 /* Replay loop to populate caller's buffer from the correct word and byte lane */
572 uint32_t this_size
= size
;
574 if (addrinc
&& ap
->packed_transfers
&& nbytes
>= 4
575 && max_tar_block_size(ap
->tar_autoincr_block
, address
) >= 4) {
579 if (dap
->ti_be_32_quirks
) {
582 *buffer
++ = *read_ptr
>> 8 * (3 - (address
++ & 3));
583 *buffer
++ = *read_ptr
>> 8 * (3 - (address
++ & 3));
586 *buffer
++ = *read_ptr
>> 8 * (3 - (address
++ & 3));
589 *buffer
++ = *read_ptr
>> 8 * (3 - (address
++ & 3));
594 *buffer
++ = *read_ptr
>> 8 * (address
++ & 3);
595 *buffer
++ = *read_ptr
>> 8 * (address
++ & 3);
598 *buffer
++ = *read_ptr
>> 8 * (address
++ & 3);
601 *buffer
++ = *read_ptr
>> 8 * (address
++ & 3);
613 int mem_ap_read_buf(struct adiv5_ap
*ap
,
614 uint8_t *buffer
, uint32_t size
, uint32_t count
, target_addr_t address
)
616 return mem_ap_read(ap
, buffer
, size
, count
, address
, true);
619 int mem_ap_write_buf(struct adiv5_ap
*ap
,
620 const uint8_t *buffer
, uint32_t size
, uint32_t count
, target_addr_t address
)
622 return mem_ap_write(ap
, buffer
, size
, count
, address
, true);
625 int mem_ap_read_buf_noincr(struct adiv5_ap
*ap
,
626 uint8_t *buffer
, uint32_t size
, uint32_t count
, target_addr_t address
)
628 return mem_ap_read(ap
, buffer
, size
, count
, address
, false);
631 int mem_ap_write_buf_noincr(struct adiv5_ap
*ap
,
632 const uint8_t *buffer
, uint32_t size
, uint32_t count
, target_addr_t address
)
634 return mem_ap_write(ap
, buffer
, size
, count
, address
, false);
637 /*--------------------------------------------------------------------------*/
640 #define DAP_POWER_DOMAIN_TIMEOUT (10)
642 /*--------------------------------------------------------------------------*/
645 * Invalidate cached DP select and cached TAR and CSW of all APs
647 void dap_invalidate_cache(struct adiv5_dap
*dap
)
649 dap
->select
= DP_SELECT_INVALID
;
650 dap
->last_read
= NULL
;
653 for (i
= 0; i
<= DP_APSEL_MAX
; i
++) {
654 /* force csw and tar write on the next mem-ap access */
655 dap
->ap
[i
].tar_valid
= false;
656 dap
->ap
[i
].csw_value
= 0;
661 * Initialize a DAP. This sets up the power domains, prepares the DP
662 * for further use and activates overrun checking.
664 * @param dap The DAP being initialized.
666 int dap_dp_init(struct adiv5_dap
*dap
)
670 LOG_DEBUG("%s", adiv5_dap_name(dap
));
672 dap
->do_reconnect
= false;
673 dap_invalidate_cache(dap
);
676 * Early initialize dap->dp_ctrl_stat.
677 * In jtag mode only, if the following queue run (in dap_dp_poll_register)
678 * fails and sets the sticky error, it will trigger the clearing
679 * of the sticky. Without this initialization system and debug power
680 * would be disabled while clearing the sticky error bit.
682 dap
->dp_ctrl_stat
= CDBGPWRUPREQ
| CSYSPWRUPREQ
;
685 * This write operation clears the sticky error bit in jtag mode only and
686 * is ignored in swd mode. It also powers-up system and debug domains in
687 * both jtag and swd modes, if not done before.
689 retval
= dap_queue_dp_write(dap
, DP_CTRL_STAT
, dap
->dp_ctrl_stat
| SSTICKYERR
);
690 if (retval
!= ERROR_OK
)
693 retval
= dap_queue_dp_read(dap
, DP_CTRL_STAT
, NULL
);
694 if (retval
!= ERROR_OK
)
697 retval
= dap_queue_dp_write(dap
, DP_CTRL_STAT
, dap
->dp_ctrl_stat
);
698 if (retval
!= ERROR_OK
)
701 /* Check that we have debug power domains activated */
702 LOG_DEBUG("DAP: wait CDBGPWRUPACK");
703 retval
= dap_dp_poll_register(dap
, DP_CTRL_STAT
,
704 CDBGPWRUPACK
, CDBGPWRUPACK
,
705 DAP_POWER_DOMAIN_TIMEOUT
);
706 if (retval
!= ERROR_OK
)
709 if (!dap
->ignore_syspwrupack
) {
710 LOG_DEBUG("DAP: wait CSYSPWRUPACK");
711 retval
= dap_dp_poll_register(dap
, DP_CTRL_STAT
,
712 CSYSPWRUPACK
, CSYSPWRUPACK
,
713 DAP_POWER_DOMAIN_TIMEOUT
);
714 if (retval
!= ERROR_OK
)
718 retval
= dap_queue_dp_read(dap
, DP_CTRL_STAT
, NULL
);
719 if (retval
!= ERROR_OK
)
722 /* With debug power on we can activate OVERRUN checking */
723 dap
->dp_ctrl_stat
= CDBGPWRUPREQ
| CSYSPWRUPREQ
| CORUNDETECT
;
724 retval
= dap_queue_dp_write(dap
, DP_CTRL_STAT
, dap
->dp_ctrl_stat
);
725 if (retval
!= ERROR_OK
)
727 retval
= dap_queue_dp_read(dap
, DP_CTRL_STAT
, NULL
);
728 if (retval
!= ERROR_OK
)
731 retval
= dap_run(dap
);
732 if (retval
!= ERROR_OK
)
739 * Initialize a DAP or do reconnect if DAP is not accessible.
741 * @param dap The DAP being initialized.
743 int dap_dp_init_or_reconnect(struct adiv5_dap
*dap
)
745 LOG_DEBUG("%s", adiv5_dap_name(dap
));
748 * Early initialize dap->dp_ctrl_stat.
749 * In jtag mode only, if the following atomic reads fail and set the
750 * sticky error, it will trigger the clearing of the sticky. Without this
751 * initialization system and debug power would be disabled while clearing
752 * the sticky error bit.
754 dap
->dp_ctrl_stat
= CDBGPWRUPREQ
| CSYSPWRUPREQ
;
756 dap
->do_reconnect
= false;
758 dap_dp_read_atomic(dap
, DP_CTRL_STAT
, NULL
);
759 if (dap
->do_reconnect
) {
760 /* dap connect calls dap_dp_init() after transport dependent initialization */
761 return dap
->ops
->connect(dap
);
763 return dap_dp_init(dap
);
768 * Initialize a DAP. This sets up the power domains, prepares the DP
769 * for further use, and arranges to use AP #0 for all AP operations
770 * until dap_ap-select() changes that policy.
772 * @param ap The MEM-AP being initialized.
774 int mem_ap_init(struct adiv5_ap
*ap
)
776 /* check that we support packed transfers */
779 struct adiv5_dap
*dap
= ap
->dap
;
781 /* Set ap->cfg_reg before calling mem_ap_setup_transfer(). */
782 /* mem_ap_setup_transfer() needs to know if the MEM_AP supports LPAE. */
783 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_CFG
, &cfg
);
784 if (retval
!= ERROR_OK
)
787 retval
= dap_run(dap
);
788 if (retval
!= ERROR_OK
)
792 ap
->tar_valid
= false;
793 ap
->csw_value
= 0; /* force csw and tar write */
794 retval
= mem_ap_setup_transfer(ap
, CSW_8BIT
| CSW_ADDRINC_PACKED
, 0);
795 if (retval
!= ERROR_OK
)
798 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_CSW
, &csw
);
799 if (retval
!= ERROR_OK
)
802 retval
= dap_run(dap
);
803 if (retval
!= ERROR_OK
)
806 if (csw
& CSW_ADDRINC_PACKED
)
807 ap
->packed_transfers
= true;
809 ap
->packed_transfers
= false;
811 /* Packed transfers on TI BE-32 processors do not work correctly in
813 if (dap
->ti_be_32_quirks
)
814 ap
->packed_transfers
= false;
816 LOG_DEBUG("MEM_AP Packed Transfers: %s",
817 ap
->packed_transfers
? "enabled" : "disabled");
819 /* The ARM ADI spec leaves implementation-defined whether unaligned
820 * memory accesses work, only work partially, or cause a sticky error.
821 * On TI BE-32 processors, reads seem to return garbage in some bytes
822 * and unaligned writes seem to cause a sticky error.
823 * TODO: it would be nice to have a way to detect whether unaligned
824 * operations are supported on other processors. */
825 ap
->unaligned_access_bad
= dap
->ti_be_32_quirks
;
827 LOG_DEBUG("MEM_AP CFG: large data %d, long address %d, big-endian %d",
828 !!(cfg
& MEM_AP_REG_CFG_LD
), !!(cfg
& MEM_AP_REG_CFG_LA
), !!(cfg
& MEM_AP_REG_CFG_BE
));
834 * Put the debug link into SWD mode, if the target supports it.
835 * The link's initial mode may be either JTAG (for example,
836 * with SWJ-DP after reset) or SWD.
838 * Note that targets using the JTAG-DP do not support SWD, and that
839 * some targets which could otherwise support it may have been
840 * configured to disable SWD signaling
842 * @param dap The DAP used
843 * @return ERROR_OK or else a fault code.
845 int dap_to_swd(struct adiv5_dap
*dap
)
847 LOG_DEBUG("Enter SWD mode");
849 return dap_send_sequence(dap
, JTAG_TO_SWD
);
853 * Put the debug link into JTAG mode, if the target supports it.
854 * The link's initial mode may be either SWD or JTAG.
856 * Note that targets implemented with SW-DP do not support JTAG, and
857 * that some targets which could otherwise support it may have been
858 * configured to disable JTAG signaling
860 * @param dap The DAP used
861 * @return ERROR_OK or else a fault code.
863 int dap_to_jtag(struct adiv5_dap
*dap
)
865 LOG_DEBUG("Enter JTAG mode");
867 return dap_send_sequence(dap
, SWD_TO_JTAG
);
870 /* CID interpretation -- see ARM IHI 0029E table B2-7
871 * and ARM IHI 0031E table D1-2.
873 * From 2009/11/25 commit 21378f58b604:
874 * "OptimoDE DESS" is ARM's semicustom DSPish stuff.
875 * Let's keep it as is, for the time being
877 static const char *class_description
[16] = {
878 [0x0] = "Generic verification component",
887 [0x9] = "CoreSight component",
889 [0xB] = "Peripheral Test Block",
891 [0xD] = "OptimoDE DESS", /* see above */
892 [0xE] = "Generic IP component",
893 [0xF] = "CoreLink, PrimeCell or System component",
896 #define ARCH_ID(architect, archid) ( \
897 (((architect) << ARM_CS_C9_DEVARCH_ARCHITECT_SHIFT) & ARM_CS_C9_DEVARCH_ARCHITECT_MASK) | \
898 (((archid) << ARM_CS_C9_DEVARCH_ARCHID_SHIFT) & ARM_CS_C9_DEVARCH_ARCHID_MASK) \
901 static const struct {
903 const char *description
;
904 } class0x9_devarch
[] = {
905 /* keep same unsorted order as in ARM IHI0029E */
906 { ARCH_ID(ARM_ID
, 0x0A00), "RAS architecture" },
907 { ARCH_ID(ARM_ID
, 0x1A01), "Instrumentation Trace Macrocell (ITM) architecture" },
908 { ARCH_ID(ARM_ID
, 0x1A02), "DWT architecture" },
909 { ARCH_ID(ARM_ID
, 0x1A03), "Flash Patch and Breakpoint unit (FPB) architecture" },
910 { ARCH_ID(ARM_ID
, 0x2A04), "Processor debug architecture (ARMv8-M)" },
911 { ARCH_ID(ARM_ID
, 0x6A05), "Processor debug architecture (ARMv8-R)" },
912 { ARCH_ID(ARM_ID
, 0x0A10), "PC sample-based profiling" },
913 { ARCH_ID(ARM_ID
, 0x4A13), "Embedded Trace Macrocell (ETM) architecture" },
914 { ARCH_ID(ARM_ID
, 0x1A14), "Cross Trigger Interface (CTI) architecture" },
915 { ARCH_ID(ARM_ID
, 0x6A15), "Processor debug architecture (v8.0-A)" },
916 { ARCH_ID(ARM_ID
, 0x7A15), "Processor debug architecture (v8.1-A)" },
917 { ARCH_ID(ARM_ID
, 0x8A15), "Processor debug architecture (v8.2-A)" },
918 { ARCH_ID(ARM_ID
, 0x2A16), "Processor Performance Monitor (PMU) architecture" },
919 { ARCH_ID(ARM_ID
, 0x0A17), "Memory Access Port v2 architecture" },
920 { ARCH_ID(ARM_ID
, 0x0A27), "JTAG Access Port v2 architecture" },
921 { ARCH_ID(ARM_ID
, 0x0A31), "Basic trace router" },
922 { ARCH_ID(ARM_ID
, 0x0A37), "Power requestor" },
923 { ARCH_ID(ARM_ID
, 0x0A47), "Unknown Access Port v2 architecture" },
924 { ARCH_ID(ARM_ID
, 0x0A50), "HSSTP architecture" },
925 { ARCH_ID(ARM_ID
, 0x0A63), "System Trace Macrocell (STM) architecture" },
926 { ARCH_ID(ARM_ID
, 0x0A75), "CoreSight ELA architecture" },
927 { ARCH_ID(ARM_ID
, 0x0AF7), "CoreSight ROM architecture" },
930 #define DEVARCH_ID_MASK (ARM_CS_C9_DEVARCH_ARCHITECT_MASK | ARM_CS_C9_DEVARCH_ARCHID_MASK)
931 #define DEVARCH_ROM_C_0X9 ARCH_ID(ARM_ID, 0x0AF7)
933 static const char *class0x9_devarch_description(uint32_t devarch
)
935 if (!(devarch
& ARM_CS_C9_DEVARCH_PRESENT
))
936 return "not present";
938 for (unsigned int i
= 0; i
< ARRAY_SIZE(class0x9_devarch
); i
++)
939 if ((devarch
& DEVARCH_ID_MASK
) == class0x9_devarch
[i
].arch_id
)
940 return class0x9_devarch
[i
].description
;
945 static const struct {
947 const char *description
;
949 { AP_TYPE_JTAG_AP
, "JTAG-AP" },
950 { AP_TYPE_COM_AP
, "COM-AP" },
951 { AP_TYPE_AHB3_AP
, "MEM-AP AHB3" },
952 { AP_TYPE_APB_AP
, "MEM-AP APB2 or APB3" },
953 { AP_TYPE_AXI_AP
, "MEM-AP AXI3 or AXI4" },
954 { AP_TYPE_AHB5_AP
, "MEM-AP AHB5" },
955 { AP_TYPE_APB4_AP
, "MEM-AP APB4" },
956 { AP_TYPE_AXI5_AP
, "MEM-AP AXI5" },
957 { AP_TYPE_AHB5H_AP
, "MEM-AP AHB5 with enhanced HPROT" },
960 static const char *ap_type_to_description(enum ap_type type
)
962 for (unsigned int i
= 0; i
< ARRAY_SIZE(ap_types
); i
++)
963 if (type
== ap_types
[i
].type
)
964 return ap_types
[i
].description
;
970 * This function checks the ID for each access port to find the requested Access Port type
972 int dap_find_ap(struct adiv5_dap
*dap
, enum ap_type type_to_find
, struct adiv5_ap
**ap_out
)
976 /* Maximum AP number is 255 since the SELECT register is 8 bits */
977 for (ap_num
= 0; ap_num
<= DP_APSEL_MAX
; ap_num
++) {
979 /* read the IDR register of the Access Port */
982 int retval
= dap_queue_ap_read(dap_ap(dap
, ap_num
), AP_REG_IDR
, &id_val
);
983 if (retval
!= ERROR_OK
)
986 retval
= dap_run(dap
);
988 /* Reading register for a non-existent AP should not cause an error,
989 * but just to be sure, try to continue searching if an error does happen.
991 if (retval
== ERROR_OK
&& (id_val
& AP_TYPE_MASK
) == type_to_find
) {
992 LOG_DEBUG("Found %s at AP index: %d (IDR=0x%08" PRIX32
")",
993 ap_type_to_description(type_to_find
),
996 *ap_out
= &dap
->ap
[ap_num
];
1001 LOG_DEBUG("No %s found", ap_type_to_description(type_to_find
));
1005 int dap_get_debugbase(struct adiv5_ap
*ap
,
1006 target_addr_t
*dbgbase
, uint32_t *apid
)
1008 struct adiv5_dap
*dap
= ap
->dap
;
1010 uint32_t baseptr_upper
, baseptr_lower
;
1012 if (ap
->cfg_reg
== MEM_AP_REG_CFG_INVALID
) {
1013 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_CFG
, &ap
->cfg_reg
);
1014 if (retval
!= ERROR_OK
)
1017 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_BASE
, &baseptr_lower
);
1018 if (retval
!= ERROR_OK
)
1020 retval
= dap_queue_ap_read(ap
, AP_REG_IDR
, apid
);
1021 if (retval
!= ERROR_OK
)
1023 /* MEM_AP_REG_BASE64 is defined as 'RES0'; can be read and then ignored on 32 bits AP */
1024 if (ap
->cfg_reg
== MEM_AP_REG_CFG_INVALID
|| is_64bit_ap(ap
)) {
1025 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_BASE64
, &baseptr_upper
);
1026 if (retval
!= ERROR_OK
)
1030 retval
= dap_run(dap
);
1031 if (retval
!= ERROR_OK
)
1034 if (!is_64bit_ap(ap
))
1036 *dbgbase
= (((target_addr_t
)baseptr_upper
) << 32) | baseptr_lower
;
1041 int dap_lookup_cs_component(struct adiv5_ap
*ap
,
1042 target_addr_t dbgbase
, uint8_t type
, target_addr_t
*addr
, int32_t *idx
)
1044 uint32_t romentry
, entry_offset
= 0, devtype
;
1045 target_addr_t component_base
;
1048 dbgbase
&= 0xFFFFFFFFFFFFF000ull
;
1052 retval
= mem_ap_read_atomic_u32(ap
, dbgbase
|
1053 entry_offset
, &romentry
);
1054 if (retval
!= ERROR_OK
)
1057 component_base
= dbgbase
+ (target_addr_t
)(romentry
& ARM_CS_ROMENTRY_OFFSET_MASK
);
1059 if (romentry
& ARM_CS_ROMENTRY_PRESENT
) {
1061 retval
= mem_ap_read_atomic_u32(ap
, component_base
+ ARM_CS_CIDR1
, &c_cid1
);
1062 if (retval
!= ERROR_OK
) {
1063 LOG_ERROR("Can't read component with base address " TARGET_ADDR_FMT
1064 ", the corresponding core might be turned off", component_base
);
1067 unsigned int class = (c_cid1
& ARM_CS_CIDR1_CLASS_MASK
) >> ARM_CS_CIDR1_CLASS_SHIFT
;
1068 if (class == ARM_CS_CLASS_0X1_ROM_TABLE
) {
1069 retval
= dap_lookup_cs_component(ap
, component_base
,
1071 if (retval
== ERROR_OK
)
1073 if (retval
!= ERROR_TARGET_RESOURCE_NOT_AVAILABLE
)
1077 retval
= mem_ap_read_atomic_u32(ap
, component_base
+ ARM_CS_C9_DEVTYPE
, &devtype
);
1078 if (retval
!= ERROR_OK
)
1080 if ((devtype
& ARM_CS_C9_DEVTYPE_MASK
) == type
) {
1082 *addr
= component_base
;
1089 } while ((romentry
> 0) && (entry_offset
< 0xf00));
1092 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1097 /** Holds registers and coordinates of a CoreSight component */
1098 struct cs_component_vals
{
1099 struct adiv5_ap
*ap
;
1100 target_addr_t component_base
;
1105 uint32_t devtype_memtype
;
1109 * Read the CoreSight registers needed during ROM Table Parsing (RTP).
1111 * @param ap Pointer to AP containing the component.
1112 * @param component_base On MEM-AP access method, base address of the component.
1113 * @param v Pointer to the struct holding the value of registers.
1115 * @return ERROR_OK on success, else a fault code.
1117 static int rtp_read_cs_regs(struct adiv5_ap
*ap
, target_addr_t component_base
,
1118 struct cs_component_vals
*v
)
1120 assert(IS_ALIGNED(component_base
, ARM_CS_ALIGN
));
1123 uint32_t cid0
, cid1
, cid2
, cid3
;
1124 uint32_t pid0
, pid1
, pid2
, pid3
, pid4
;
1125 int retval
= ERROR_OK
;
1128 v
->component_base
= component_base
;
1130 /* sort by offset to gain speed */
1133 * Registers DEVARCH, DEVID and DEVTYPE are valid on Class 0x9 devices
1134 * only, but are at offset above 0xf00, so can be read on any device
1135 * without triggering error. Read them for eventual use on Class 0x9.
1137 if (retval
== ERROR_OK
)
1138 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_C9_DEVARCH
, &v
->devarch
);
1140 if (retval
== ERROR_OK
)
1141 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_C9_DEVID
, &v
->devid
);
1143 /* Same address as ARM_CS_C1_MEMTYPE */
1144 if (retval
== ERROR_OK
)
1145 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_C9_DEVTYPE
, &v
->devtype_memtype
);
1147 if (retval
== ERROR_OK
)
1148 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_PIDR4
, &pid4
);
1150 if (retval
== ERROR_OK
)
1151 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_PIDR0
, &pid0
);
1152 if (retval
== ERROR_OK
)
1153 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_PIDR1
, &pid1
);
1154 if (retval
== ERROR_OK
)
1155 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_PIDR2
, &pid2
);
1156 if (retval
== ERROR_OK
)
1157 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_PIDR3
, &pid3
);
1159 if (retval
== ERROR_OK
)
1160 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_CIDR0
, &cid0
);
1161 if (retval
== ERROR_OK
)
1162 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_CIDR1
, &cid1
);
1163 if (retval
== ERROR_OK
)
1164 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_CIDR2
, &cid2
);
1165 if (retval
== ERROR_OK
)
1166 retval
= mem_ap_read_u32(ap
, component_base
+ ARM_CS_CIDR3
, &cid3
);
1168 if (retval
== ERROR_OK
)
1169 retval
= dap_run(ap
->dap
);
1170 if (retval
!= ERROR_OK
) {
1171 LOG_DEBUG("Failed read CoreSight registers");
1175 v
->cid
= (cid3
& 0xff) << 24
1176 | (cid2
& 0xff) << 16
1177 | (cid1
& 0xff) << 8
1179 v
->pid
= (uint64_t)(pid4
& 0xff) << 32
1180 | (pid3
& 0xff) << 24
1181 | (pid2
& 0xff) << 16
1182 | (pid1
& 0xff) << 8
1188 /* Part number interpretations are from Cortex
1189 * core specs, the CoreSight components TRM
1190 * (ARM DDI 0314H), CoreSight System Design
1191 * Guide (ARM DGI 0012D) and ETM specs; also
1192 * from chip observation (e.g. TI SDTI).
1195 static const struct dap_part_nums
{
1196 uint16_t designer_id
;
1200 } dap_part_nums
[] = {
1201 { ARM_ID
, 0x000, "Cortex-M3 SCS", "(System Control Space)", },
1202 { ARM_ID
, 0x001, "Cortex-M3 ITM", "(Instrumentation Trace Module)", },
1203 { ARM_ID
, 0x002, "Cortex-M3 DWT", "(Data Watchpoint and Trace)", },
1204 { ARM_ID
, 0x003, "Cortex-M3 FPB", "(Flash Patch and Breakpoint)", },
1205 { ARM_ID
, 0x008, "Cortex-M0 SCS", "(System Control Space)", },
1206 { ARM_ID
, 0x00a, "Cortex-M0 DWT", "(Data Watchpoint and Trace)", },
1207 { ARM_ID
, 0x00b, "Cortex-M0 BPU", "(Breakpoint Unit)", },
1208 { ARM_ID
, 0x00c, "Cortex-M4 SCS", "(System Control Space)", },
1209 { ARM_ID
, 0x00d, "CoreSight ETM11", "(Embedded Trace)", },
1210 { ARM_ID
, 0x00e, "Cortex-M7 FPB", "(Flash Patch and Breakpoint)", },
1211 { ARM_ID
, 0x193, "SoC-600 TSGEN", "(Timestamp Generator)", },
1212 { ARM_ID
, 0x470, "Cortex-M1 ROM", "(ROM Table)", },
1213 { ARM_ID
, 0x471, "Cortex-M0 ROM", "(ROM Table)", },
1214 { ARM_ID
, 0x490, "Cortex-A15 GIC", "(Generic Interrupt Controller)", },
1215 { ARM_ID
, 0x492, "Cortex-R52 GICD", "(Distributor)", },
1216 { ARM_ID
, 0x493, "Cortex-R52 GICR", "(Redistributor)", },
1217 { ARM_ID
, 0x4a1, "Cortex-A53 ROM", "(v8 Memory Map ROM Table)", },
1218 { ARM_ID
, 0x4a2, "Cortex-A57 ROM", "(ROM Table)", },
1219 { ARM_ID
, 0x4a3, "Cortex-A53 ROM", "(v7 Memory Map ROM Table)", },
1220 { ARM_ID
, 0x4a4, "Cortex-A72 ROM", "(ROM Table)", },
1221 { ARM_ID
, 0x4a9, "Cortex-A9 ROM", "(ROM Table)", },
1222 { ARM_ID
, 0x4aa, "Cortex-A35 ROM", "(v8 Memory Map ROM Table)", },
1223 { ARM_ID
, 0x4af, "Cortex-A15 ROM", "(ROM Table)", },
1224 { ARM_ID
, 0x4b5, "Cortex-R5 ROM", "(ROM Table)", },
1225 { ARM_ID
, 0x4b8, "Cortex-R52 ROM", "(ROM Table)", },
1226 { ARM_ID
, 0x4c0, "Cortex-M0+ ROM", "(ROM Table)", },
1227 { ARM_ID
, 0x4c3, "Cortex-M3 ROM", "(ROM Table)", },
1228 { ARM_ID
, 0x4c4, "Cortex-M4 ROM", "(ROM Table)", },
1229 { ARM_ID
, 0x4c7, "Cortex-M7 PPB ROM", "(Private Peripheral Bus ROM Table)", },
1230 { ARM_ID
, 0x4c8, "Cortex-M7 ROM", "(ROM Table)", },
1231 { ARM_ID
, 0x4e0, "Cortex-A35 ROM", "(v7 Memory Map ROM Table)", },
1232 { ARM_ID
, 0x4e4, "Cortex-A76 ROM", "(ROM Table)", },
1233 { ARM_ID
, 0x906, "CoreSight CTI", "(Cross Trigger)", },
1234 { ARM_ID
, 0x907, "CoreSight ETB", "(Trace Buffer)", },
1235 { ARM_ID
, 0x908, "CoreSight CSTF", "(Trace Funnel)", },
1236 { ARM_ID
, 0x909, "CoreSight ATBR", "(Advanced Trace Bus Replicator)", },
1237 { ARM_ID
, 0x910, "CoreSight ETM9", "(Embedded Trace)", },
1238 { ARM_ID
, 0x912, "CoreSight TPIU", "(Trace Port Interface Unit)", },
1239 { ARM_ID
, 0x913, "CoreSight ITM", "(Instrumentation Trace Macrocell)", },
1240 { ARM_ID
, 0x914, "CoreSight SWO", "(Single Wire Output)", },
1241 { ARM_ID
, 0x917, "CoreSight HTM", "(AHB Trace Macrocell)", },
1242 { ARM_ID
, 0x920, "CoreSight ETM11", "(Embedded Trace)", },
1243 { ARM_ID
, 0x921, "Cortex-A8 ETM", "(Embedded Trace)", },
1244 { ARM_ID
, 0x922, "Cortex-A8 CTI", "(Cross Trigger)", },
1245 { ARM_ID
, 0x923, "Cortex-M3 TPIU", "(Trace Port Interface Unit)", },
1246 { ARM_ID
, 0x924, "Cortex-M3 ETM", "(Embedded Trace)", },
1247 { ARM_ID
, 0x925, "Cortex-M4 ETM", "(Embedded Trace)", },
1248 { ARM_ID
, 0x930, "Cortex-R4 ETM", "(Embedded Trace)", },
1249 { ARM_ID
, 0x931, "Cortex-R5 ETM", "(Embedded Trace)", },
1250 { ARM_ID
, 0x932, "CoreSight MTB-M0+", "(Micro Trace Buffer)", },
1251 { ARM_ID
, 0x941, "CoreSight TPIU-Lite", "(Trace Port Interface Unit)", },
1252 { ARM_ID
, 0x950, "Cortex-A9 PTM", "(Program Trace Macrocell)", },
1253 { ARM_ID
, 0x955, "Cortex-A5 ETM", "(Embedded Trace)", },
1254 { ARM_ID
, 0x95a, "Cortex-A72 ETM", "(Embedded Trace)", },
1255 { ARM_ID
, 0x95b, "Cortex-A17 PTM", "(Program Trace Macrocell)", },
1256 { ARM_ID
, 0x95d, "Cortex-A53 ETM", "(Embedded Trace)", },
1257 { ARM_ID
, 0x95e, "Cortex-A57 ETM", "(Embedded Trace)", },
1258 { ARM_ID
, 0x95f, "Cortex-A15 PTM", "(Program Trace Macrocell)", },
1259 { ARM_ID
, 0x961, "CoreSight TMC", "(Trace Memory Controller)", },
1260 { ARM_ID
, 0x962, "CoreSight STM", "(System Trace Macrocell)", },
1261 { ARM_ID
, 0x975, "Cortex-M7 ETM", "(Embedded Trace)", },
1262 { ARM_ID
, 0x9a0, "CoreSight PMU", "(Performance Monitoring Unit)", },
1263 { ARM_ID
, 0x9a1, "Cortex-M4 TPIU", "(Trace Port Interface Unit)", },
1264 { ARM_ID
, 0x9a4, "CoreSight GPR", "(Granular Power Requester)", },
1265 { ARM_ID
, 0x9a5, "Cortex-A5 PMU", "(Performance Monitor Unit)", },
1266 { ARM_ID
, 0x9a7, "Cortex-A7 PMU", "(Performance Monitor Unit)", },
1267 { ARM_ID
, 0x9a8, "Cortex-A53 CTI", "(Cross Trigger)", },
1268 { ARM_ID
, 0x9a9, "Cortex-M7 TPIU", "(Trace Port Interface Unit)", },
1269 { ARM_ID
, 0x9ae, "Cortex-A17 PMU", "(Performance Monitor Unit)", },
1270 { ARM_ID
, 0x9af, "Cortex-A15 PMU", "(Performance Monitor Unit)", },
1271 { ARM_ID
, 0x9b6, "Cortex-R52 PMU/CTI/ETM", "(Performance Monitor Unit/Cross Trigger/ETM)", },
1272 { ARM_ID
, 0x9b7, "Cortex-R7 PMU", "(Performance Monitor Unit)", },
1273 { ARM_ID
, 0x9d3, "Cortex-A53 PMU", "(Performance Monitor Unit)", },
1274 { ARM_ID
, 0x9d7, "Cortex-A57 PMU", "(Performance Monitor Unit)", },
1275 { ARM_ID
, 0x9d8, "Cortex-A72 PMU", "(Performance Monitor Unit)", },
1276 { ARM_ID
, 0x9da, "Cortex-A35 PMU/CTI/ETM", "(Performance Monitor Unit/Cross Trigger/ETM)", },
1277 { ARM_ID
, 0x9e2, "SoC-600 APB-AP", "(APB4 Memory Access Port)", },
1278 { ARM_ID
, 0x9e3, "SoC-600 AHB-AP", "(AHB5 Memory Access Port)", },
1279 { ARM_ID
, 0x9e4, "SoC-600 AXI-AP", "(AXI Memory Access Port)", },
1280 { ARM_ID
, 0x9e5, "SoC-600 APv1 Adapter", "(Access Port v1 Adapter)", },
1281 { ARM_ID
, 0x9e6, "SoC-600 JTAG-AP", "(JTAG Access Port)", },
1282 { ARM_ID
, 0x9e7, "SoC-600 TPIU", "(Trace Port Interface Unit)", },
1283 { ARM_ID
, 0x9e8, "SoC-600 TMC ETR/ETS", "(Embedded Trace Router/Streamer)", },
1284 { ARM_ID
, 0x9e9, "SoC-600 TMC ETB", "(Embedded Trace Buffer)", },
1285 { ARM_ID
, 0x9ea, "SoC-600 TMC ETF", "(Embedded Trace FIFO)", },
1286 { ARM_ID
, 0x9eb, "SoC-600 ATB Funnel", "(Trace Funnel)", },
1287 { ARM_ID
, 0x9ec, "SoC-600 ATB Replicator", "(Trace Replicator)", },
1288 { ARM_ID
, 0x9ed, "SoC-600 CTI", "(Cross Trigger)", },
1289 { ARM_ID
, 0x9ee, "SoC-600 CATU", "(Address Translation Unit)", },
1290 { ARM_ID
, 0xc05, "Cortex-A5 Debug", "(Debug Unit)", },
1291 { ARM_ID
, 0xc07, "Cortex-A7 Debug", "(Debug Unit)", },
1292 { ARM_ID
, 0xc08, "Cortex-A8 Debug", "(Debug Unit)", },
1293 { ARM_ID
, 0xc09, "Cortex-A9 Debug", "(Debug Unit)", },
1294 { ARM_ID
, 0xc0e, "Cortex-A17 Debug", "(Debug Unit)", },
1295 { ARM_ID
, 0xc0f, "Cortex-A15 Debug", "(Debug Unit)", },
1296 { ARM_ID
, 0xc14, "Cortex-R4 Debug", "(Debug Unit)", },
1297 { ARM_ID
, 0xc15, "Cortex-R5 Debug", "(Debug Unit)", },
1298 { ARM_ID
, 0xc17, "Cortex-R7 Debug", "(Debug Unit)", },
1299 { ARM_ID
, 0xd03, "Cortex-A53 Debug", "(Debug Unit)", },
1300 { ARM_ID
, 0xd04, "Cortex-A35 Debug", "(Debug Unit)", },
1301 { ARM_ID
, 0xd07, "Cortex-A57 Debug", "(Debug Unit)", },
1302 { ARM_ID
, 0xd08, "Cortex-A72 Debug", "(Debug Unit)", },
1303 { ARM_ID
, 0xd0b, "Cortex-A76 Debug", "(Debug Unit)", },
1304 { ARM_ID
, 0xd0c, "Neoverse N1", "(Debug Unit)", },
1305 { ARM_ID
, 0xd13, "Cortex-R52 Debug", "(Debug Unit)", },
1306 { ARM_ID
, 0xd49, "Neoverse N2", "(Debug Unit)", },
1307 { 0x017, 0x120, "TI SDTI", "(System Debug Trace Interface)", }, /* from OMAP3 memmap */
1308 { 0x017, 0x343, "TI DAPCTL", "", }, /* from OMAP3 memmap */
1309 { 0x017, 0x9af, "MSP432 ROM", "(ROM Table)" },
1310 { 0x01f, 0xcd0, "Atmel CPU with DSU", "(CPU)" },
1311 { 0x041, 0x1db, "XMC4500 ROM", "(ROM Table)" },
1312 { 0x041, 0x1df, "XMC4700/4800 ROM", "(ROM Table)" },
1313 { 0x041, 0x1ed, "XMC1000 ROM", "(ROM Table)" },
1314 { 0x065, 0x000, "SHARC+/Blackfin+", "", },
1315 { 0x070, 0x440, "Qualcomm QDSS Component v1", "(Qualcomm Designed CoreSight Component v1)", },
1316 { 0x0bf, 0x100, "Brahma-B53 Debug", "(Debug Unit)", },
1317 { 0x0bf, 0x9d3, "Brahma-B53 PMU", "(Performance Monitor Unit)", },
1318 { 0x0bf, 0x4a1, "Brahma-B53 ROM", "(ROM Table)", },
1319 { 0x0bf, 0x721, "Brahma-B53 ROM", "(ROM Table)", },
1320 { 0x1eb, 0x181, "Tegra 186 ROM", "(ROM Table)", },
1321 { 0x1eb, 0x202, "Denver ETM", "(Denver Embedded Trace)", },
1322 { 0x1eb, 0x211, "Tegra 210 ROM", "(ROM Table)", },
1323 { 0x1eb, 0x302, "Denver Debug", "(Debug Unit)", },
1324 { 0x1eb, 0x402, "Denver PMU", "(Performance Monitor Unit)", },
1327 static const struct dap_part_nums
*pidr_to_part_num(unsigned int designer_id
, unsigned int part_num
)
1329 static const struct dap_part_nums unknown
= {
1330 .type
= "Unrecognized",
1334 for (unsigned int i
= 0; i
< ARRAY_SIZE(dap_part_nums
); i
++)
1335 if (dap_part_nums
[i
].designer_id
== designer_id
&& dap_part_nums
[i
].part_num
== part_num
)
1336 return &dap_part_nums
[i
];
1341 static int dap_devtype_display(struct command_invocation
*cmd
, uint32_t devtype
)
1343 const char *major
= "Reserved", *subtype
= "Reserved";
1344 const unsigned int minor
= (devtype
& ARM_CS_C9_DEVTYPE_SUB_MASK
) >> ARM_CS_C9_DEVTYPE_SUB_SHIFT
;
1345 const unsigned int devtype_major
= (devtype
& ARM_CS_C9_DEVTYPE_MAJOR_MASK
) >> ARM_CS_C9_DEVTYPE_MAJOR_SHIFT
;
1346 switch (devtype_major
) {
1348 major
= "Miscellaneous";
1354 subtype
= "Validation component";
1359 major
= "Trace Sink";
1376 major
= "Trace Link";
1382 subtype
= "Funnel, router";
1388 subtype
= "FIFO, buffer";
1393 major
= "Trace Source";
1399 subtype
= "Processor";
1405 subtype
= "Engine/Coprocessor";
1411 subtype
= "Software";
1416 major
= "Debug Control";
1422 subtype
= "Trigger Matrix";
1425 subtype
= "Debug Auth";
1428 subtype
= "Power Requestor";
1433 major
= "Debug Logic";
1439 subtype
= "Processor";
1445 subtype
= "Engine/Coprocessor";
1456 major
= "Performance Monitor";
1462 subtype
= "Processor";
1468 subtype
= "Engine/Coprocessor";
1479 command_print(cmd
, "\t\tType is 0x%02x, %s, %s",
1480 devtype
& ARM_CS_C9_DEVTYPE_MASK
,
1485 /* Broken ROM tables can have circular references. Stop after a while */
1486 #define ROM_TABLE_MAX_DEPTH (16)
1488 /* TODO: these prototypes will be removed in a following patch */
1489 static int dap_info_mem_ap_header(struct command_invocation
*cmd
,
1490 int retval
, struct adiv5_ap
*ap
,
1491 target_addr_t dbgbase
, uint32_t apid
);
1492 static int dap_info_cs_component(struct command_invocation
*cmd
,
1493 int retval
, struct cs_component_vals
*v
, int depth
);
1495 static int rtp_cs_component(struct command_invocation
*cmd
,
1496 struct adiv5_ap
*ap
, target_addr_t dbgbase
, int depth
);
1498 static int rtp_rom_loop(struct command_invocation
*cmd
,
1499 struct adiv5_ap
*ap
, target_addr_t base_address
, int depth
,
1500 unsigned int max_entries
)
1502 assert(IS_ALIGNED(base_address
, ARM_CS_ALIGN
));
1507 snprintf(tabs
, sizeof(tabs
), "[L%02d] ", depth
);
1509 unsigned int offset
= 0;
1510 while (max_entries
--) {
1512 unsigned int saved_offset
= offset
;
1514 int retval
= mem_ap_read_atomic_u32(ap
, base_address
+ offset
, &romentry
);
1516 if (retval
!= ERROR_OK
) {
1517 LOG_DEBUG("Failed read ROM table entry");
1518 command_print(cmd
, "\t%sROMTABLE[0x%x] Read error", tabs
, saved_offset
);
1519 command_print(cmd
, "\t\tUnable to continue");
1520 command_print(cmd
, "\t%s\tStop parsing of ROM table", tabs
);
1524 command_print(cmd
, "\t%sROMTABLE[0x%x] = 0x%08" PRIx32
,
1525 tabs
, saved_offset
, romentry
);
1527 if (romentry
== 0) {
1528 command_print(cmd
, "\t%s\tEnd of ROM table", tabs
);
1532 if (!(romentry
& ARM_CS_ROMENTRY_PRESENT
)) {
1533 command_print(cmd
, "\t\tComponent not present");
1537 /* Recurse. "romentry" is signed */
1538 target_addr_t component_base
= base_address
+ (int32_t)(romentry
& ARM_CS_ROMENTRY_OFFSET_MASK
);
1539 retval
= rtp_cs_component(cmd
, ap
, component_base
, depth
+ 1);
1540 if (retval
!= ERROR_OK
) {
1541 /* TODO: do we need to send an ABORT before continuing? */
1542 LOG_DEBUG("Ignore error parsing CoreSight component");
1550 static int rtp_cs_component(struct command_invocation
*cmd
,
1551 struct adiv5_ap
*ap
, target_addr_t base_address
, int depth
)
1553 struct cs_component_vals v
;
1556 assert(IS_ALIGNED(base_address
, ARM_CS_ALIGN
));
1558 if (depth
> ROM_TABLE_MAX_DEPTH
)
1559 retval
= ERROR_FAIL
;
1561 retval
= rtp_read_cs_regs(ap
, base_address
, &v
);
1563 retval
= dap_info_cs_component(cmd
, retval
, &v
, depth
);
1564 if (retval
!= ERROR_OK
)
1565 return ERROR_OK
; /* Don't abort recursion */
1567 if (!is_valid_arm_cs_cidr(v
.cid
))
1568 return ERROR_OK
; /* Don't abort recursion */
1570 const unsigned int class = ARM_CS_CIDR_CLASS(v
.cid
);
1572 if (class == ARM_CS_CLASS_0X1_ROM_TABLE
)
1573 return rtp_rom_loop(cmd
, ap
, base_address
, depth
, 960);
1575 if (class == ARM_CS_CLASS_0X9_CS_COMPONENT
) {
1576 if ((v
.devarch
& ARM_CS_C9_DEVARCH_PRESENT
) == 0)
1579 /* quit if not ROM table */
1580 if ((v
.devarch
& DEVARCH_ID_MASK
) != DEVARCH_ROM_C_0X9
)
1583 return rtp_rom_loop(cmd
, ap
, base_address
, depth
, 512);
1586 /* Class other than 0x1 and 0x9 */
1590 int dap_info_command(struct command_invocation
*cmd
,
1591 struct adiv5_ap
*ap
)
1595 target_addr_t dbgbase
;
1596 target_addr_t invalid_entry
;
1598 /* Now we read ROM table ID registers, ref. ARM IHI 0029B sec */
1599 retval
= dap_get_debugbase(ap
, &dbgbase
, &apid
);
1600 retval
= dap_info_mem_ap_header(cmd
, retval
, ap
, dbgbase
, apid
);
1601 if (retval
!= ERROR_OK
)
1607 /* NOTE: a MEM-AP may have a single CoreSight component that's
1608 * not a ROM table ... or have no such components at all.
1610 const unsigned int class = (apid
& AP_REG_IDR_CLASS_MASK
) >> AP_REG_IDR_CLASS_SHIFT
;
1612 if (class == AP_REG_IDR_CLASS_MEM_AP
) {
1613 if (is_64bit_ap(ap
))
1614 invalid_entry
= 0xFFFFFFFFFFFFFFFFull
;
1616 invalid_entry
= 0xFFFFFFFFul
;
1618 if (dbgbase
!= invalid_entry
&& (dbgbase
& 0x3) != 0x2)
1619 rtp_cs_component(cmd
, ap
, dbgbase
& 0xFFFFFFFFFFFFF000ull
, 0);
1625 /* Actions for command "dap info" */
1627 static int dap_info_mem_ap_header(struct command_invocation
*cmd
,
1628 int retval
, struct adiv5_ap
*ap
,
1629 target_addr_t dbgbase
, uint32_t apid
)
1631 target_addr_t invalid_entry
;
1633 if (retval
!= ERROR_OK
) {
1634 command_print(cmd
, "\t\tCan't read MEM-AP, the corresponding core might be turned off");
1638 command_print(cmd
, "AP ID register 0x%8.8" PRIx32
, apid
);
1640 command_print(cmd
, "No AP found at this ap 0x%x", ap
->ap_num
);
1644 command_print(cmd
, "\tType is %s", ap_type_to_description(apid
& AP_TYPE_MASK
));
1646 /* NOTE: a MEM-AP may have a single CoreSight component that's
1647 * not a ROM table ... or have no such components at all.
1649 const unsigned int class = (apid
& AP_REG_IDR_CLASS_MASK
) >> AP_REG_IDR_CLASS_SHIFT
;
1651 if (class == AP_REG_IDR_CLASS_MEM_AP
) {
1652 if (is_64bit_ap(ap
))
1653 invalid_entry
= 0xFFFFFFFFFFFFFFFFull
;
1655 invalid_entry
= 0xFFFFFFFFul
;
1657 command_print(cmd
, "MEM-AP BASE " TARGET_ADDR_FMT
, dbgbase
);
1659 if (dbgbase
== invalid_entry
|| (dbgbase
& 0x3) == 0x2) {
1660 command_print(cmd
, "\tNo ROM table present");
1663 command_print(cmd
, "\tValid ROM table present");
1665 command_print(cmd
, "\tROM table in legacy format");
1672 static int dap_info_cs_component(struct command_invocation
*cmd
,
1673 int retval
, struct cs_component_vals
*v
, int depth
)
1675 if (depth
> ROM_TABLE_MAX_DEPTH
) {
1676 command_print(cmd
, "\tTables too deep");
1680 command_print(cmd
, "\t\tComponent base address " TARGET_ADDR_FMT
, v
->component_base
);
1682 if (retval
!= ERROR_OK
) {
1683 command_print(cmd
, "\t\tCan't read component, the corresponding core might be turned off");
1687 if (!is_valid_arm_cs_cidr(v
->cid
)) {
1688 command_print(cmd
, "\t\tInvalid CID 0x%08" PRIx32
, v
->cid
);
1689 return ERROR_OK
; /* Don't abort recursion */
1692 /* component may take multiple 4K pages */
1693 uint32_t size
= ARM_CS_PIDR_SIZE(v
->pid
);
1695 command_print(cmd
, "\t\tStart address " TARGET_ADDR_FMT
, v
->component_base
- 0x1000 * size
);
1697 command_print(cmd
, "\t\tPeripheral ID 0x%010" PRIx64
, v
->pid
);
1699 const unsigned int part_num
= ARM_CS_PIDR_PART(v
->pid
);
1700 unsigned int designer_id
= ARM_CS_PIDR_DESIGNER(v
->pid
);
1702 if (v
->pid
& ARM_CS_PIDR_JEDEC
) {
1704 command_print(cmd
, "\t\tDesigner is 0x%03x, %s",
1705 designer_id
, jep106_manufacturer(designer_id
));
1707 /* Legacy ASCII ID, clear invalid bits */
1708 designer_id
&= 0x7f;
1709 command_print(cmd
, "\t\tDesigner ASCII code 0x%02x, %s",
1710 designer_id
, designer_id
== 0x41 ? "ARM" : "<unknown>");
1713 const struct dap_part_nums
*partnum
= pidr_to_part_num(designer_id
, part_num
);
1714 command_print(cmd
, "\t\tPart is 0x%03x, %s %s", part_num
, partnum
->type
, partnum
->full
);
1716 const unsigned int class = ARM_CS_CIDR_CLASS(v
->cid
);
1717 command_print(cmd
, "\t\tComponent class is 0x%x, %s", class, class_description
[class]);
1719 if (class == ARM_CS_CLASS_0X1_ROM_TABLE
) {
1720 if (v
->devtype_memtype
& ARM_CS_C1_MEMTYPE_SYSMEM_MASK
)
1721 command_print(cmd
, "\t\tMEMTYPE system memory present on bus");
1723 command_print(cmd
, "\t\tMEMTYPE system memory not present: dedicated debug bus");
1727 if (class == ARM_CS_CLASS_0X9_CS_COMPONENT
) {
1728 dap_devtype_display(cmd
, v
->devtype_memtype
);
1730 /* REVISIT also show ARM_CS_C9_DEVID */
1732 if ((v
->devarch
& ARM_CS_C9_DEVARCH_PRESENT
) == 0)
1735 unsigned int architect_id
= ARM_CS_C9_DEVARCH_ARCHITECT(v
->devarch
);
1736 unsigned int revision
= ARM_CS_C9_DEVARCH_REVISION(v
->devarch
);
1737 command_print(cmd
, "\t\tDev Arch is 0x%08" PRIx32
", %s \"%s\" rev.%u", v
->devarch
,
1738 jep106_manufacturer(architect_id
), class0x9_devarch_description(v
->devarch
),
1741 if ((v
->devarch
& DEVARCH_ID_MASK
) == DEVARCH_ROM_C_0X9
) {
1742 command_print(cmd
, "\t\tType is ROM table");
1744 if (v
->devid
& ARM_CS_C9_DEVID_SYSMEM_MASK
)
1745 command_print(cmd
, "\t\tMEMTYPE system memory present on bus");
1747 command_print(cmd
, "\t\tMEMTYPE system memory not present: dedicated debug bus");
1752 /* Class other than 0x1 and 0x9 */
1756 enum adiv5_cfg_param
{
1760 CFG_CTIBASE
, /* DEPRECATED */
1763 static const struct jim_nvp nvp_config_opts
[] = {
1764 { .name
= "-dap", .value
= CFG_DAP
},
1765 { .name
= "-ap-num", .value
= CFG_AP_NUM
},
1766 { .name
= "-baseaddr", .value
= CFG_BASEADDR
},
1767 { .name
= "-ctibase", .value
= CFG_CTIBASE
}, /* DEPRECATED */
1768 { .name
= NULL
, .value
= -1 }
1771 static int adiv5_jim_spot_configure(struct jim_getopt_info
*goi
,
1772 struct adiv5_dap
**dap_p
, int *ap_num_p
, uint32_t *base_p
)
1777 Jim_SetEmptyResult(goi
->interp
);
1780 int e
= jim_nvp_name2value_obj(goi
->interp
, nvp_config_opts
,
1783 return JIM_CONTINUE
;
1785 /* base_p can be NULL, then '-baseaddr' option is treated as unknown */
1786 if (!base_p
&& (n
->value
== CFG_BASEADDR
|| n
->value
== CFG_CTIBASE
))
1787 return JIM_CONTINUE
;
1789 e
= jim_getopt_obj(goi
, NULL
);
1795 if (goi
->isconfigure
) {
1797 struct adiv5_dap
*dap
;
1798 e
= jim_getopt_obj(goi
, &o_t
);
1801 dap
= dap_instance_by_jim_obj(goi
->interp
, o_t
);
1803 Jim_SetResultString(goi
->interp
, "DAP name invalid!", -1);
1806 if (*dap_p
&& *dap_p
!= dap
) {
1807 Jim_SetResultString(goi
->interp
,
1808 "DAP assignment cannot be changed!", -1);
1816 Jim_SetResultString(goi
->interp
, "DAP not configured", -1);
1819 Jim_SetResultString(goi
->interp
, adiv5_dap_name(*dap_p
), -1);
1824 if (goi
->isconfigure
) {
1826 e
= jim_getopt_wide(goi
, &ap_num
);
1829 if (ap_num
< 0 || ap_num
> DP_APSEL_MAX
) {
1830 Jim_SetResultString(goi
->interp
, "Invalid AP number!", -1);
1837 if (*ap_num_p
== DP_APSEL_INVALID
) {
1838 Jim_SetResultString(goi
->interp
, "AP number not configured", -1);
1841 Jim_SetResult(goi
->interp
, Jim_NewIntObj(goi
->interp
, *ap_num_p
));
1846 LOG_WARNING("DEPRECATED! use \'-baseaddr' not \'-ctibase\'");
1849 if (goi
->isconfigure
) {
1851 e
= jim_getopt_wide(goi
, &base
);
1854 *base_p
= (uint32_t)base
;
1858 Jim_SetResult(goi
->interp
, Jim_NewIntObj(goi
->interp
, *base_p
));
1866 Jim_WrongNumArgs(goi
->interp
, goi
->argc
, goi
->argv
, "NO PARAMS");
1870 int adiv5_jim_configure(struct target
*target
, struct jim_getopt_info
*goi
)
1872 struct adiv5_private_config
*pc
;
1875 pc
= (struct adiv5_private_config
*)target
->private_config
;
1877 pc
= calloc(1, sizeof(struct adiv5_private_config
));
1878 pc
->ap_num
= DP_APSEL_INVALID
;
1879 target
->private_config
= pc
;
1882 target
->has_dap
= true;
1884 e
= adiv5_jim_spot_configure(goi
, &pc
->dap
, &pc
->ap_num
, NULL
);
1888 if (pc
->dap
&& !target
->dap_configured
) {
1889 if (target
->tap_configured
) {
1891 Jim_SetResultString(goi
->interp
,
1892 "-chain-position and -dap configparams are mutually exclusive!", -1);
1895 target
->tap
= pc
->dap
->tap
;
1896 target
->dap_configured
= true;
1902 int adiv5_verify_config(struct adiv5_private_config
*pc
)
1913 int adiv5_jim_mem_ap_spot_configure(struct adiv5_mem_ap_spot
*cfg
,
1914 struct jim_getopt_info
*goi
)
1916 return adiv5_jim_spot_configure(goi
, &cfg
->dap
, &cfg
->ap_num
, &cfg
->base
);
1919 int adiv5_mem_ap_spot_init(struct adiv5_mem_ap_spot
*p
)
1922 p
->ap_num
= DP_APSEL_INVALID
;
1927 COMMAND_HANDLER(handle_dap_info_command
)
1929 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
1937 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], apsel
);
1938 if (apsel
> DP_APSEL_MAX
) {
1939 command_print(CMD
, "Invalid AP number");
1940 return ERROR_COMMAND_ARGUMENT_INVALID
;
1944 return ERROR_COMMAND_SYNTAX_ERROR
;
1947 return dap_info_command(CMD
, &dap
->ap
[apsel
]);
1950 COMMAND_HANDLER(dap_baseaddr_command
)
1952 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
1953 uint32_t apsel
, baseaddr_lower
, baseaddr_upper
;
1954 struct adiv5_ap
*ap
;
1955 target_addr_t baseaddr
;
1965 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], apsel
);
1966 /* AP address is in bits 31:24 of DP_SELECT */
1967 if (apsel
> DP_APSEL_MAX
) {
1968 command_print(CMD
, "Invalid AP number");
1969 return ERROR_COMMAND_ARGUMENT_INVALID
;
1973 return ERROR_COMMAND_SYNTAX_ERROR
;
1976 /* NOTE: assumes we're talking to a MEM-AP, which
1977 * has a base address. There are other kinds of AP,
1978 * though they're not common for now. This should
1979 * use the ID register to verify it's a MEM-AP.
1982 ap
= dap_ap(dap
, apsel
);
1983 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_BASE
, &baseaddr_lower
);
1985 if (retval
== ERROR_OK
&& ap
->cfg_reg
== MEM_AP_REG_CFG_INVALID
)
1986 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_CFG
, &ap
->cfg_reg
);
1988 if (retval
== ERROR_OK
&& (ap
->cfg_reg
== MEM_AP_REG_CFG_INVALID
|| is_64bit_ap(ap
))) {
1989 /* MEM_AP_REG_BASE64 is defined as 'RES0'; can be read and then ignored on 32 bits AP */
1990 retval
= dap_queue_ap_read(ap
, MEM_AP_REG_BASE64
, &baseaddr_upper
);
1993 if (retval
== ERROR_OK
)
1994 retval
= dap_run(dap
);
1995 if (retval
!= ERROR_OK
)
1998 if (is_64bit_ap(ap
)) {
1999 baseaddr
= (((target_addr_t
)baseaddr_upper
) << 32) | baseaddr_lower
;
2000 command_print(CMD
, "0x%016" PRIx64
, baseaddr
);
2002 command_print(CMD
, "0x%08" PRIx32
, baseaddr_lower
);
2007 COMMAND_HANDLER(dap_memaccess_command
)
2009 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
2010 uint32_t memaccess_tck
;
2014 memaccess_tck
= dap
->ap
[dap
->apsel
].memaccess_tck
;
2017 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], memaccess_tck
);
2020 return ERROR_COMMAND_SYNTAX_ERROR
;
2022 dap
->ap
[dap
->apsel
].memaccess_tck
= memaccess_tck
;
2024 command_print(CMD
, "memory bus access delay set to %" PRIu32
" tck",
2025 dap
->ap
[dap
->apsel
].memaccess_tck
);
2030 COMMAND_HANDLER(dap_apsel_command
)
2032 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
2037 command_print(CMD
, "%" PRIu32
, dap
->apsel
);
2040 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], apsel
);
2041 /* AP address is in bits 31:24 of DP_SELECT */
2042 if (apsel
> DP_APSEL_MAX
) {
2043 command_print(CMD
, "Invalid AP number");
2044 return ERROR_COMMAND_ARGUMENT_INVALID
;
2048 return ERROR_COMMAND_SYNTAX_ERROR
;
2055 COMMAND_HANDLER(dap_apcsw_command
)
2057 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
2058 uint32_t apcsw
= dap
->ap
[dap
->apsel
].csw_default
;
2059 uint32_t csw_val
, csw_mask
;
2063 command_print(CMD
, "ap %" PRIu32
" selected, csw 0x%8.8" PRIx32
,
2067 if (strcmp(CMD_ARGV
[0], "default") == 0)
2068 csw_val
= CSW_AHB_DEFAULT
;
2070 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], csw_val
);
2072 if (csw_val
& (CSW_SIZE_MASK
| CSW_ADDRINC_MASK
)) {
2073 LOG_ERROR("CSW value cannot include 'Size' and 'AddrInc' bit-fields");
2074 return ERROR_COMMAND_ARGUMENT_INVALID
;
2079 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], csw_val
);
2080 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[1], csw_mask
);
2081 if (csw_mask
& (CSW_SIZE_MASK
| CSW_ADDRINC_MASK
)) {
2082 LOG_ERROR("CSW mask cannot include 'Size' and 'AddrInc' bit-fields");
2083 return ERROR_COMMAND_ARGUMENT_INVALID
;
2085 apcsw
= (apcsw
& ~csw_mask
) | (csw_val
& csw_mask
);
2088 return ERROR_COMMAND_SYNTAX_ERROR
;
2090 dap
->ap
[dap
->apsel
].csw_default
= apcsw
;
2097 COMMAND_HANDLER(dap_apid_command
)
2099 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
2100 uint32_t apsel
, apid
;
2108 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], apsel
);
2109 /* AP address is in bits 31:24 of DP_SELECT */
2110 if (apsel
> DP_APSEL_MAX
) {
2111 command_print(CMD
, "Invalid AP number");
2112 return ERROR_COMMAND_ARGUMENT_INVALID
;
2116 return ERROR_COMMAND_SYNTAX_ERROR
;
2119 retval
= dap_queue_ap_read(dap_ap(dap
, apsel
), AP_REG_IDR
, &apid
);
2120 if (retval
!= ERROR_OK
)
2122 retval
= dap_run(dap
);
2123 if (retval
!= ERROR_OK
)
2126 command_print(CMD
, "0x%8.8" PRIx32
, apid
);
2131 COMMAND_HANDLER(dap_apreg_command
)
2133 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
2134 uint32_t apsel
, reg
, value
;
2135 struct adiv5_ap
*ap
;
2138 if (CMD_ARGC
< 2 || CMD_ARGC
> 3)
2139 return ERROR_COMMAND_SYNTAX_ERROR
;
2141 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], apsel
);
2142 /* AP address is in bits 31:24 of DP_SELECT */
2143 if (apsel
> DP_APSEL_MAX
) {
2144 command_print(CMD
, "Invalid AP number");
2145 return ERROR_COMMAND_ARGUMENT_INVALID
;
2148 ap
= dap_ap(dap
, apsel
);
2150 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[1], reg
);
2151 if (reg
>= 256 || (reg
& 3)) {
2152 command_print(CMD
, "Invalid reg value (should be less than 256 and 4 bytes aligned)");
2153 return ERROR_COMMAND_ARGUMENT_INVALID
;
2156 if (CMD_ARGC
== 3) {
2157 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[2], value
);
2159 case MEM_AP_REG_CSW
:
2160 ap
->csw_value
= 0; /* invalid, in case write fails */
2161 retval
= dap_queue_ap_write(ap
, reg
, value
);
2162 if (retval
== ERROR_OK
)
2163 ap
->csw_value
= value
;
2165 case MEM_AP_REG_TAR
:
2166 retval
= dap_queue_ap_write(ap
, reg
, value
);
2167 if (retval
== ERROR_OK
)
2168 ap
->tar_value
= (ap
->tar_value
& ~0xFFFFFFFFull
) | value
;
2170 /* To track independent writes to TAR and TAR64, two tar_valid flags */
2171 /* should be used. To keep it simple, tar_valid is only invalidated on a */
2172 /* write fail. This approach causes a later re-write of the TAR and TAR64 */
2173 /* if tar_valid is false. */
2174 ap
->tar_valid
= false;
2177 case MEM_AP_REG_TAR64
:
2178 retval
= dap_queue_ap_write(ap
, reg
, value
);
2179 if (retval
== ERROR_OK
)
2180 ap
->tar_value
= (ap
->tar_value
& 0xFFFFFFFFull
) | (((target_addr_t
)value
) << 32);
2182 /* See above comment for the MEM_AP_REG_TAR failed write case */
2183 ap
->tar_valid
= false;
2187 retval
= dap_queue_ap_write(ap
, reg
, value
);
2191 retval
= dap_queue_ap_read(ap
, reg
, &value
);
2193 if (retval
== ERROR_OK
)
2194 retval
= dap_run(dap
);
2196 if (retval
!= ERROR_OK
)
2200 command_print(CMD
, "0x%08" PRIx32
, value
);
2205 COMMAND_HANDLER(dap_dpreg_command
)
2207 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
2208 uint32_t reg
, value
;
2211 if (CMD_ARGC
< 1 || CMD_ARGC
> 2)
2212 return ERROR_COMMAND_SYNTAX_ERROR
;
2214 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], reg
);
2215 if (reg
>= 256 || (reg
& 3)) {
2216 command_print(CMD
, "Invalid reg value (should be less than 256 and 4 bytes aligned)");
2217 return ERROR_COMMAND_ARGUMENT_INVALID
;
2220 if (CMD_ARGC
== 2) {
2221 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[1], value
);
2222 retval
= dap_queue_dp_write(dap
, reg
, value
);
2224 retval
= dap_queue_dp_read(dap
, reg
, &value
);
2226 if (retval
== ERROR_OK
)
2227 retval
= dap_run(dap
);
2229 if (retval
!= ERROR_OK
)
2233 command_print(CMD
, "0x%08" PRIx32
, value
);
2238 COMMAND_HANDLER(dap_ti_be_32_quirks_command
)
2240 struct adiv5_dap
*dap
= adiv5_get_dap(CMD_DATA
);
2241 return CALL_COMMAND_HANDLER(handle_command_parse_bool
, &dap
->ti_be_32_quirks
,
2242 "TI BE-32 quirks mode");
2245 const struct command_registration dap_instance_commands
[] = {
2248 .handler
= handle_dap_info_command
,
2249 .mode
= COMMAND_EXEC
,
2250 .help
= "display ROM table for MEM-AP "
2251 "(default currently selected AP)",
2252 .usage
= "[ap_num]",
2256 .handler
= dap_apsel_command
,
2257 .mode
= COMMAND_ANY
,
2258 .help
= "Set the currently selected AP (default 0) "
2259 "and display the result",
2260 .usage
= "[ap_num]",
2264 .handler
= dap_apcsw_command
,
2265 .mode
= COMMAND_ANY
,
2266 .help
= "Set CSW default bits",
2267 .usage
= "[value [mask]]",
2272 .handler
= dap_apid_command
,
2273 .mode
= COMMAND_EXEC
,
2274 .help
= "return ID register from AP "
2275 "(default currently selected AP)",
2276 .usage
= "[ap_num]",
2280 .handler
= dap_apreg_command
,
2281 .mode
= COMMAND_EXEC
,
2282 .help
= "read/write a register from AP "
2283 "(reg is byte address of a word register, like 0 4 8...)",
2284 .usage
= "ap_num reg [value]",
2288 .handler
= dap_dpreg_command
,
2289 .mode
= COMMAND_EXEC
,
2290 .help
= "read/write a register from DP "
2291 "(reg is byte address (bank << 4 | reg) of a word register, like 0 4 8...)",
2292 .usage
= "reg [value]",
2296 .handler
= dap_baseaddr_command
,
2297 .mode
= COMMAND_EXEC
,
2298 .help
= "return debug base address from MEM-AP "
2299 "(default currently selected AP)",
2300 .usage
= "[ap_num]",
2303 .name
= "memaccess",
2304 .handler
= dap_memaccess_command
,
2305 .mode
= COMMAND_EXEC
,
2306 .help
= "set/get number of extra tck for MEM-AP memory "
2307 "bus access [0-255]",
2308 .usage
= "[cycles]",
2311 .name
= "ti_be_32_quirks",
2312 .handler
= dap_ti_be_32_quirks_command
,
2313 .mode
= COMMAND_CONFIG
,
2314 .help
= "set/get quirks mode for TI TMS450/TMS570 processors",
2315 .usage
= "[enable]",
2317 COMMAND_REGISTRATION_DONE
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)