target/riscv: add common magic
[openocd.git] / src / target / armv4_5_mmu.c
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2
3 /***************************************************************************
4 * Copyright (C) 2005 by Dominic Rath *
5 * Dominic.Rath@gmx.de *
6 ***************************************************************************/
7
8 #ifdef HAVE_CONFIG_H
9 #include "config.h"
10 #endif
11
12 #include <helper/log.h>
13 #include "target.h"
14 #include "armv4_5_mmu.h"
15
16 int armv4_5_mmu_translate_va(struct target *target,
17 struct armv4_5_mmu_common *armv4_5_mmu, uint32_t va, uint32_t *cb, uint32_t *val)
18 {
19 uint32_t first_lvl_descriptor = 0x0;
20 uint32_t second_lvl_descriptor = 0x0;
21 uint32_t ttb;
22 int retval;
23 retval = armv4_5_mmu->get_ttb(target, &ttb);
24 if (retval != ERROR_OK)
25 return retval;
26
27 retval = armv4_5_mmu_read_physical(target, armv4_5_mmu,
28 (ttb & 0xffffc000) | ((va & 0xfff00000) >> 18),
29 4, 1, (uint8_t *)&first_lvl_descriptor);
30 if (retval != ERROR_OK)
31 return retval;
32 first_lvl_descriptor = target_buffer_get_u32(target, (uint8_t *)&first_lvl_descriptor);
33
34 LOG_DEBUG("1st lvl desc: %8.8" PRIx32 "", first_lvl_descriptor);
35
36 if ((first_lvl_descriptor & 0x3) == 0) {
37 LOG_ERROR("Address translation failure");
38 return ERROR_TARGET_TRANSLATION_FAULT;
39 }
40
41 if (!armv4_5_mmu->has_tiny_pages && ((first_lvl_descriptor & 0x3) == 3)) {
42 LOG_ERROR("Address translation failure");
43 return ERROR_TARGET_TRANSLATION_FAULT;
44 }
45
46 if ((first_lvl_descriptor & 0x3) == 2) {
47 /* section descriptor */
48 *cb = (first_lvl_descriptor & 0xc) >> 2;
49 *val = (first_lvl_descriptor & 0xfff00000) | (va & 0x000fffff);
50 return ERROR_OK;
51 }
52
53 if ((first_lvl_descriptor & 0x3) == 1) {
54 /* coarse page table */
55 retval = armv4_5_mmu_read_physical(target, armv4_5_mmu,
56 (first_lvl_descriptor & 0xfffffc00) | ((va & 0x000ff000) >> 10),
57 4, 1, (uint8_t *)&second_lvl_descriptor);
58 if (retval != ERROR_OK)
59 return retval;
60 } else if ((first_lvl_descriptor & 0x3) == 3) {
61 /* fine page table */
62 retval = armv4_5_mmu_read_physical(target, armv4_5_mmu,
63 (first_lvl_descriptor & 0xfffff000) | ((va & 0x000ffc00) >> 8),
64 4, 1, (uint8_t *)&second_lvl_descriptor);
65 if (retval != ERROR_OK)
66 return retval;
67 }
68
69 second_lvl_descriptor = target_buffer_get_u32(target, (uint8_t *)&second_lvl_descriptor);
70
71 LOG_DEBUG("2nd lvl desc: %8.8" PRIx32 "", second_lvl_descriptor);
72
73 if ((second_lvl_descriptor & 0x3) == 0) {
74 LOG_ERROR("Address translation failure");
75 return ERROR_TARGET_TRANSLATION_FAULT;
76 }
77
78 /* cacheable/bufferable is always specified in bits 3-2 */
79 *cb = (second_lvl_descriptor & 0xc) >> 2;
80
81 if ((second_lvl_descriptor & 0x3) == 1) {
82 /* large page descriptor */
83 *val = (second_lvl_descriptor & 0xffff0000) | (va & 0x0000ffff);
84 return ERROR_OK;
85 }
86
87 if ((second_lvl_descriptor & 0x3) == 2) {
88 /* small page descriptor */
89 *val = (second_lvl_descriptor & 0xfffff000) | (va & 0x00000fff);
90 return ERROR_OK;
91 }
92
93 if ((second_lvl_descriptor & 0x3) == 3) {
94 /* tiny page descriptor */
95 *val = (second_lvl_descriptor & 0xfffffc00) | (va & 0x000003ff);
96 return ERROR_OK;
97 }
98
99 /* should not happen */
100 LOG_ERROR("Address translation failure");
101 return ERROR_TARGET_TRANSLATION_FAULT;
102 }
103
104 int armv4_5_mmu_read_physical(struct target *target,
105 struct armv4_5_mmu_common *armv4_5_mmu, uint32_t address,
106 uint32_t size, uint32_t count, uint8_t *buffer)
107 {
108 int retval;
109
110 if (target->state != TARGET_HALTED)
111 return ERROR_TARGET_NOT_HALTED;
112
113 /* disable MMU and data (or unified) cache */
114 retval = armv4_5_mmu->disable_mmu_caches(target, 1, 1, 0);
115 if (retval != ERROR_OK)
116 return retval;
117
118 retval = armv4_5_mmu->read_memory(target, address, size, count, buffer);
119 if (retval != ERROR_OK)
120 return retval;
121
122 /* reenable MMU / cache */
123 retval = armv4_5_mmu->enable_mmu_caches(target, armv4_5_mmu->mmu_enabled,
124 armv4_5_mmu->armv4_5_cache.d_u_cache_enabled,
125 armv4_5_mmu->armv4_5_cache.i_cache_enabled);
126 if (retval != ERROR_OK)
127 return retval;
128
129 return retval;
130 }
131
132 int armv4_5_mmu_write_physical(struct target *target,
133 struct armv4_5_mmu_common *armv4_5_mmu, uint32_t address,
134 uint32_t size, uint32_t count, const uint8_t *buffer)
135 {
136 int retval;
137
138 if (target->state != TARGET_HALTED)
139 return ERROR_TARGET_NOT_HALTED;
140
141 /* disable MMU and data (or unified) cache */
142 retval = armv4_5_mmu->disable_mmu_caches(target, 1, 1, 0);
143 if (retval != ERROR_OK)
144 return retval;
145
146 retval = armv4_5_mmu->write_memory(target, address, size, count, buffer);
147 if (retval != ERROR_OK)
148 return retval;
149
150 /* reenable MMU / cache */
151 retval = armv4_5_mmu->enable_mmu_caches(target, armv4_5_mmu->mmu_enabled,
152 armv4_5_mmu->armv4_5_cache.d_u_cache_enabled,
153 armv4_5_mmu->armv4_5_cache.i_cache_enabled);
154 if (retval != ERROR_OK)
155 return retval;
156
157 return retval;
158 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)