arm: add error propagation to generic get_ttb fn
[openocd.git] / src / target / armv4_5_mmu.c
1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
4 * *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
9 * *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
14 * *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
20 #ifdef HAVE_CONFIG_H
21 #include "config.h"
22 #endif
23
24 #include <helper/log.h>
25 #include "target.h"
26 #include "armv4_5_mmu.h"
27
28
29 int armv4_5_mmu_translate_va(struct target *target, struct armv4_5_mmu_common *armv4_5_mmu, uint32_t va, uint32_t *cb, uint32_t *val)
30 {
31 uint32_t first_lvl_descriptor = 0x0;
32 uint32_t second_lvl_descriptor = 0x0;
33 uint32_t ttb;
34 int retval;
35 retval = armv4_5_mmu->get_ttb(target, &ttb);
36 if (retval != ERROR_OK)
37 return retval;
38
39 retval = armv4_5_mmu_read_physical(target, armv4_5_mmu,
40 (ttb & 0xffffc000) | ((va & 0xfff00000) >> 18),
41 4, 1, (uint8_t*)&first_lvl_descriptor);
42 if (retval != ERROR_OK)
43 return retval;
44 first_lvl_descriptor = target_buffer_get_u32(target, (uint8_t*)&first_lvl_descriptor);
45
46 LOG_DEBUG("1st lvl desc: %8.8" PRIx32 "", first_lvl_descriptor);
47
48 if ((first_lvl_descriptor & 0x3) == 0)
49 {
50 LOG_ERROR("Address translation failure");
51 return ERROR_TARGET_TRANSLATION_FAULT;
52 }
53
54 if (!armv4_5_mmu->has_tiny_pages && ((first_lvl_descriptor & 0x3) == 3))
55 {
56 LOG_ERROR("Address translation failure");
57 return ERROR_TARGET_TRANSLATION_FAULT;
58 }
59
60 if ((first_lvl_descriptor & 0x3) == 2)
61 {
62 /* section descriptor */
63 *cb = (first_lvl_descriptor & 0xc) >> 2;
64 *val = (first_lvl_descriptor & 0xfff00000) | (va & 0x000fffff);
65 return ERROR_OK;
66 }
67
68 if ((first_lvl_descriptor & 0x3) == 1)
69 {
70 /* coarse page table */
71 retval = armv4_5_mmu_read_physical(target, armv4_5_mmu,
72 (first_lvl_descriptor & 0xfffffc00) | ((va & 0x000ff000) >> 10),
73 4, 1, (uint8_t*)&second_lvl_descriptor);
74 if (retval != ERROR_OK)
75 return retval;
76 }
77 else if ((first_lvl_descriptor & 0x3) == 3)
78 {
79 /* fine page table */
80 retval = armv4_5_mmu_read_physical(target, armv4_5_mmu,
81 (first_lvl_descriptor & 0xfffff000) | ((va & 0x000ffc00) >> 8),
82 4, 1, (uint8_t*)&second_lvl_descriptor);
83 if (retval != ERROR_OK)
84 return retval;
85 }
86
87 second_lvl_descriptor = target_buffer_get_u32(target, (uint8_t*)&second_lvl_descriptor);
88
89 LOG_DEBUG("2nd lvl desc: %8.8" PRIx32 "", second_lvl_descriptor);
90
91 if ((second_lvl_descriptor & 0x3) == 0)
92 {
93 LOG_ERROR("Address translation failure");
94 return ERROR_TARGET_TRANSLATION_FAULT;
95 }
96
97 /* cacheable/bufferable is always specified in bits 3-2 */
98 *cb = (second_lvl_descriptor & 0xc) >> 2;
99
100 if ((second_lvl_descriptor & 0x3) == 1)
101 {
102 /* large page descriptor */
103 *val = (second_lvl_descriptor & 0xffff0000) | (va & 0x0000ffff);
104 return ERROR_OK;
105 }
106
107 if ((second_lvl_descriptor & 0x3) == 2)
108 {
109 /* small page descriptor */
110 *val = (second_lvl_descriptor & 0xfffff000) | (va & 0x00000fff);
111 return ERROR_OK;
112 }
113
114 if ((second_lvl_descriptor & 0x3) == 3)
115 {
116 /* tiny page descriptor */
117 *val = (second_lvl_descriptor & 0xfffffc00) | (va & 0x000003ff);
118 return ERROR_OK;
119 }
120
121 /* should not happen */
122 LOG_ERROR("Address translation failure");
123 return ERROR_TARGET_TRANSLATION_FAULT;
124 }
125
126 int armv4_5_mmu_read_physical(struct target *target, struct armv4_5_mmu_common *armv4_5_mmu, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
127 {
128 int retval;
129
130 if (target->state != TARGET_HALTED)
131 return ERROR_TARGET_NOT_HALTED;
132
133 /* disable MMU and data (or unified) cache */
134 armv4_5_mmu->disable_mmu_caches(target, 1, 1, 0);
135
136 retval = armv4_5_mmu->read_memory(target, address, size, count, buffer);
137
138 /* reenable MMU / cache */
139 armv4_5_mmu->enable_mmu_caches(target, armv4_5_mmu->mmu_enabled,
140 armv4_5_mmu->armv4_5_cache.d_u_cache_enabled,
141 armv4_5_mmu->armv4_5_cache.i_cache_enabled);
142
143 return retval;
144 }
145
146 int armv4_5_mmu_write_physical(struct target *target, struct armv4_5_mmu_common *armv4_5_mmu, uint32_t address, uint32_t size, uint32_t count, uint8_t *buffer)
147 {
148 int retval;
149
150 if (target->state != TARGET_HALTED)
151 return ERROR_TARGET_NOT_HALTED;
152
153 /* disable MMU and data (or unified) cache */
154 armv4_5_mmu->disable_mmu_caches(target, 1, 1, 0);
155
156 retval = armv4_5_mmu->write_memory(target, address, size, count, buffer);
157
158 /* reenable MMU / cache */
159 armv4_5_mmu->enable_mmu_caches(target, armv4_5_mmu->mmu_enabled,
160 armv4_5_mmu->armv4_5_cache.d_u_cache_enabled,
161 armv4_5_mmu->armv4_5_cache.i_cache_enabled);
162
163 return retval;
164 }

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)