1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2006 by Magnus Lundin *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program. If not, see <http://www.gnu.org/licenses/>. *
25 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
27 ***************************************************************************/
32 #include "jtag/interface.h"
33 #include "breakpoints.h"
35 #include "target_request.h"
36 #include "target_type.h"
37 #include "arm_disassembler.h"
39 #include "arm_opcodes.h"
40 #include "arm_semihosting.h"
41 #include <helper/time_support.h>
43 /* NOTE: most of this should work fine for the Cortex-M1 and
44 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
45 * Some differences: M0/M1 doesn't have FBP remapping or the
46 * DWT tracing/profiling support. (So the cycle counter will
47 * not be usable; the other stuff isn't currently used here.)
49 * Although there are some workarounds for errata seen only in r0p0
50 * silicon, such old parts are hard to find and thus not much tested
54 /* forward declarations */
55 static int cortex_m_store_core_reg_u32(struct target
*target
,
56 uint32_t num
, uint32_t value
);
57 static void cortex_m_dwt_free(struct target
*target
);
59 static int cortexm_dap_read_coreregister_u32(struct target
*target
,
60 uint32_t *value
, int regnum
)
62 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
66 /* because the DCB_DCRDR is used for the emulated dcc channel
67 * we have to save/restore the DCB_DCRDR when used */
68 if (target
->dbg_msg_enabled
) {
69 retval
= mem_ap_read_u32(armv7m
->debug_ap
, DCB_DCRDR
, &dcrdr
);
70 if (retval
!= ERROR_OK
)
74 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRSR
, regnum
);
75 if (retval
!= ERROR_OK
)
78 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, value
);
79 if (retval
!= ERROR_OK
)
82 if (target
->dbg_msg_enabled
) {
83 /* restore DCB_DCRDR - this needs to be in a separate
84 * transaction otherwise the emulated DCC channel breaks */
85 if (retval
== ERROR_OK
)
86 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, dcrdr
);
92 static int cortexm_dap_write_coreregister_u32(struct target
*target
,
93 uint32_t value
, int regnum
)
95 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
99 /* because the DCB_DCRDR is used for the emulated dcc channel
100 * we have to save/restore the DCB_DCRDR when used */
101 if (target
->dbg_msg_enabled
) {
102 retval
= mem_ap_read_u32(armv7m
->debug_ap
, DCB_DCRDR
, &dcrdr
);
103 if (retval
!= ERROR_OK
)
107 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, value
);
108 if (retval
!= ERROR_OK
)
111 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRSR
, regnum
| DCRSR_WnR
);
112 if (retval
!= ERROR_OK
)
115 if (target
->dbg_msg_enabled
) {
116 /* restore DCB_DCRDR - this needs to be in a seperate
117 * transaction otherwise the emulated DCC channel breaks */
118 if (retval
== ERROR_OK
)
119 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DCRDR
, dcrdr
);
125 static int cortex_m_write_debug_halt_mask(struct target
*target
,
126 uint32_t mask_on
, uint32_t mask_off
)
128 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
129 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
131 /* mask off status bits */
132 cortex_m
->dcb_dhcsr
&= ~((0xFFFF << 16) | mask_off
);
133 /* create new register mask */
134 cortex_m
->dcb_dhcsr
|= DBGKEY
| C_DEBUGEN
| mask_on
;
136 return mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, cortex_m
->dcb_dhcsr
);
139 static int cortex_m_clear_halt(struct target
*target
)
141 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
142 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
145 /* clear step if any */
146 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_STEP
);
148 /* Read Debug Fault Status Register */
149 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
, &cortex_m
->nvic_dfsr
);
150 if (retval
!= ERROR_OK
)
153 /* Clear Debug Fault Status */
154 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
, cortex_m
->nvic_dfsr
);
155 if (retval
!= ERROR_OK
)
157 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32
"", cortex_m
->nvic_dfsr
);
162 static int cortex_m_single_step_core(struct target
*target
)
164 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
165 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
168 /* Mask interrupts before clearing halt, if done already. This avoids
169 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
170 * HALT can put the core into an unknown state.
172 if (!(cortex_m
->dcb_dhcsr
& C_MASKINTS
)) {
173 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
,
174 DBGKEY
| C_MASKINTS
| C_HALT
| C_DEBUGEN
);
175 if (retval
!= ERROR_OK
)
178 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
,
179 DBGKEY
| C_MASKINTS
| C_STEP
| C_DEBUGEN
);
180 if (retval
!= ERROR_OK
)
184 /* restore dhcsr reg */
185 cortex_m_clear_halt(target
);
190 static int cortex_m_enable_fpb(struct target
*target
)
192 int retval
= target_write_u32(target
, FP_CTRL
, 3);
193 if (retval
!= ERROR_OK
)
196 /* check the fpb is actually enabled */
198 retval
= target_read_u32(target
, FP_CTRL
, &fpctrl
);
199 if (retval
!= ERROR_OK
)
208 static int cortex_m_endreset_event(struct target
*target
)
213 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
214 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
215 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
216 struct cortex_m_fp_comparator
*fp_list
= cortex_m
->fp_comparator_list
;
217 struct cortex_m_dwt_comparator
*dwt_list
= cortex_m
->dwt_comparator_list
;
219 /* REVISIT The four debug monitor bits are currently ignored... */
220 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &dcb_demcr
);
221 if (retval
!= ERROR_OK
)
223 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32
"", dcb_demcr
);
225 /* this register is used for emulated dcc channel */
226 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, 0);
227 if (retval
!= ERROR_OK
)
230 /* Enable debug requests */
231 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
232 if (retval
!= ERROR_OK
)
234 if (!(cortex_m
->dcb_dhcsr
& C_DEBUGEN
)) {
235 retval
= cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
| C_MASKINTS
);
236 if (retval
!= ERROR_OK
)
240 /* clear any interrupt masking */
241 cortex_m_write_debug_halt_mask(target
, 0, C_MASKINTS
);
243 /* Enable features controlled by ITM and DWT blocks, and catch only
244 * the vectors we were told to pay attention to.
246 * Target firmware is responsible for all fault handling policy
247 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
248 * or manual updates to the NVIC SHCSR and CCR registers.
250 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
251 if (retval
!= ERROR_OK
)
254 /* Paranoia: evidently some (early?) chips don't preserve all the
255 * debug state (including FBP, DWT, etc) across reset...
259 retval
= cortex_m_enable_fpb(target
);
260 if (retval
!= ERROR_OK
) {
261 LOG_ERROR("Failed to enable the FPB");
265 cortex_m
->fpb_enabled
= 1;
267 /* Restore FPB registers */
268 for (i
= 0; i
< cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
; i
++) {
269 retval
= target_write_u32(target
, fp_list
[i
].fpcr_address
, fp_list
[i
].fpcr_value
);
270 if (retval
!= ERROR_OK
)
274 /* Restore DWT registers */
275 for (i
= 0; i
< cortex_m
->dwt_num_comp
; i
++) {
276 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 0,
278 if (retval
!= ERROR_OK
)
280 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 4,
282 if (retval
!= ERROR_OK
)
284 retval
= target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 8,
285 dwt_list
[i
].function
);
286 if (retval
!= ERROR_OK
)
289 retval
= dap_run(swjdp
);
290 if (retval
!= ERROR_OK
)
293 register_cache_invalidate(armv7m
->arm
.core_cache
);
295 /* make sure we have latest dhcsr flags */
296 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
301 static int cortex_m_examine_debug_reason(struct target
*target
)
303 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
305 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason
306 * only check the debug reason if we don't know it already */
308 if ((target
->debug_reason
!= DBG_REASON_DBGRQ
)
309 && (target
->debug_reason
!= DBG_REASON_SINGLESTEP
)) {
310 if (cortex_m
->nvic_dfsr
& DFSR_BKPT
) {
311 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
312 if (cortex_m
->nvic_dfsr
& DFSR_DWTTRAP
)
313 target
->debug_reason
= DBG_REASON_WPTANDBKPT
;
314 } else if (cortex_m
->nvic_dfsr
& DFSR_DWTTRAP
)
315 target
->debug_reason
= DBG_REASON_WATCHPOINT
;
316 else if (cortex_m
->nvic_dfsr
& DFSR_VCATCH
)
317 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
318 else /* EXTERNAL, HALTED */
319 target
->debug_reason
= DBG_REASON_UNDEFINED
;
325 static int cortex_m_examine_exception_reason(struct target
*target
)
327 uint32_t shcsr
= 0, except_sr
= 0, cfsr
= -1, except_ar
= -1;
328 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
329 struct adiv5_dap
*swjdp
= armv7m
->arm
.dap
;
332 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_SHCSR
, &shcsr
);
333 if (retval
!= ERROR_OK
)
335 switch (armv7m
->exception_number
) {
338 case 3: /* Hard Fault */
339 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_HFSR
, &except_sr
);
340 if (retval
!= ERROR_OK
)
342 if (except_sr
& 0x40000000) {
343 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &cfsr
);
344 if (retval
!= ERROR_OK
)
348 case 4: /* Memory Management */
349 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
350 if (retval
!= ERROR_OK
)
352 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_MMFAR
, &except_ar
);
353 if (retval
!= ERROR_OK
)
356 case 5: /* Bus Fault */
357 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
358 if (retval
!= ERROR_OK
)
360 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_BFAR
, &except_ar
);
361 if (retval
!= ERROR_OK
)
364 case 6: /* Usage Fault */
365 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_CFSR
, &except_sr
);
366 if (retval
!= ERROR_OK
)
369 case 11: /* SVCall */
371 case 12: /* Debug Monitor */
372 retval
= mem_ap_read_u32(armv7m
->debug_ap
, NVIC_DFSR
, &except_sr
);
373 if (retval
!= ERROR_OK
)
376 case 14: /* PendSV */
378 case 15: /* SysTick */
384 retval
= dap_run(swjdp
);
385 if (retval
== ERROR_OK
)
386 LOG_DEBUG("%s SHCSR 0x%" PRIx32
", SR 0x%" PRIx32
387 ", CFSR 0x%" PRIx32
", AR 0x%" PRIx32
,
388 armv7m_exception_string(armv7m
->exception_number
),
389 shcsr
, except_sr
, cfsr
, except_ar
);
393 static int cortex_m_debug_entry(struct target
*target
)
398 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
399 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
400 struct arm
*arm
= &armv7m
->arm
;
405 cortex_m_clear_halt(target
);
406 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
407 if (retval
!= ERROR_OK
)
410 retval
= armv7m
->examine_debug_reason(target
);
411 if (retval
!= ERROR_OK
)
414 /* Examine target state and mode
415 * First load register accessible through core debug port */
416 int num_regs
= arm
->core_cache
->num_regs
;
418 for (i
= 0; i
< num_regs
; i
++) {
419 r
= &armv7m
->arm
.core_cache
->reg_list
[i
];
421 arm
->read_core_reg(target
, r
, i
, ARM_MODE_ANY
);
425 xPSR
= buf_get_u32(r
->value
, 0, 32);
427 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
430 cortex_m_store_core_reg_u32(target
, 16, xPSR
& ~0xff);
433 /* Are we in an exception handler */
435 armv7m
->exception_number
= (xPSR
& 0x1FF);
437 arm
->core_mode
= ARM_MODE_HANDLER
;
438 arm
->map
= armv7m_msp_reg_map
;
440 unsigned control
= buf_get_u32(arm
->core_cache
441 ->reg_list
[ARMV7M_CONTROL
].value
, 0, 2);
443 /* is this thread privileged? */
444 arm
->core_mode
= control
& 1
445 ? ARM_MODE_USER_THREAD
448 /* which stack is it using? */
450 arm
->map
= armv7m_psp_reg_map
;
452 arm
->map
= armv7m_msp_reg_map
;
454 armv7m
->exception_number
= 0;
457 if (armv7m
->exception_number
)
458 cortex_m_examine_exception_reason(target
);
460 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32
", target->state: %s",
461 arm_mode_name(arm
->core_mode
),
462 buf_get_u32(arm
->pc
->value
, 0, 32),
463 target_state_name(target
));
465 if (armv7m
->post_debug_entry
) {
466 retval
= armv7m
->post_debug_entry(target
);
467 if (retval
!= ERROR_OK
)
474 static int cortex_m_poll(struct target
*target
)
476 int detected_failure
= ERROR_OK
;
477 int retval
= ERROR_OK
;
478 enum target_state prev_target_state
= target
->state
;
479 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
480 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
482 /* Read from Debug Halting Control and Status Register */
483 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
484 if (retval
!= ERROR_OK
) {
485 target
->state
= TARGET_UNKNOWN
;
489 /* Recover from lockup. See ARMv7-M architecture spec,
490 * section B1.5.15 "Unrecoverable exception cases".
492 if (cortex_m
->dcb_dhcsr
& S_LOCKUP
) {
493 LOG_ERROR("%s -- clearing lockup after double fault",
494 target_name(target
));
495 cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
496 target
->debug_reason
= DBG_REASON_DBGRQ
;
498 /* We have to execute the rest (the "finally" equivalent, but
499 * still throw this exception again).
501 detected_failure
= ERROR_FAIL
;
503 /* refresh status bits */
504 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
505 if (retval
!= ERROR_OK
)
509 if (cortex_m
->dcb_dhcsr
& S_RESET_ST
) {
510 target
->state
= TARGET_RESET
;
514 if (target
->state
== TARGET_RESET
) {
515 /* Cannot switch context while running so endreset is
516 * called with target->state == TARGET_RESET
518 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32
,
519 cortex_m
->dcb_dhcsr
);
520 retval
= cortex_m_endreset_event(target
);
521 if (retval
!= ERROR_OK
) {
522 target
->state
= TARGET_UNKNOWN
;
525 target
->state
= TARGET_RUNNING
;
526 prev_target_state
= TARGET_RUNNING
;
529 if (cortex_m
->dcb_dhcsr
& S_HALT
) {
530 target
->state
= TARGET_HALTED
;
532 if ((prev_target_state
== TARGET_RUNNING
) || (prev_target_state
== TARGET_RESET
)) {
533 retval
= cortex_m_debug_entry(target
);
534 if (retval
!= ERROR_OK
)
537 if (arm_semihosting(target
, &retval
) != 0)
540 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
542 if (prev_target_state
== TARGET_DEBUG_RUNNING
) {
544 retval
= cortex_m_debug_entry(target
);
545 if (retval
!= ERROR_OK
)
548 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_HALTED
);
552 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
553 * How best to model low power modes?
556 if (target
->state
== TARGET_UNKNOWN
) {
557 /* check if processor is retiring instructions */
558 if (cortex_m
->dcb_dhcsr
& S_RETIRE_ST
) {
559 target
->state
= TARGET_RUNNING
;
564 /* Did we detect a failure condition that we cleared? */
565 if (detected_failure
!= ERROR_OK
)
566 retval
= detected_failure
;
570 static int cortex_m_halt(struct target
*target
)
572 LOG_DEBUG("target->state: %s",
573 target_state_name(target
));
575 if (target
->state
== TARGET_HALTED
) {
576 LOG_DEBUG("target was already halted");
580 if (target
->state
== TARGET_UNKNOWN
)
581 LOG_WARNING("target was in unknown state when halt was requested");
583 if (target
->state
== TARGET_RESET
) {
584 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST
) && jtag_get_srst()) {
585 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
586 return ERROR_TARGET_FAILURE
;
588 /* we came here in a reset_halt or reset_init sequence
589 * debug entry was already prepared in cortex_m3_assert_reset()
591 target
->debug_reason
= DBG_REASON_DBGRQ
;
597 /* Write to Debug Halting Control and Status Register */
598 cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
600 target
->debug_reason
= DBG_REASON_DBGRQ
;
605 static int cortex_m_soft_reset_halt(struct target
*target
)
607 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
608 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
609 uint32_t dcb_dhcsr
= 0;
610 int retval
, timeout
= 0;
612 /* soft_reset_halt is deprecated on cortex_m as the same functionality
613 * can be obtained by using 'reset halt' and 'cortex_m reset_config vectreset'
614 * As this reset only used VC_CORERESET it would only ever reset the cortex_m
615 * core, not the peripherals */
616 LOG_WARNING("soft_reset_halt is deprecated, please use 'reset halt' instead.");
618 /* Enter debug state on reset; restore DEMCR in endreset_event() */
619 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
,
620 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
621 if (retval
!= ERROR_OK
)
624 /* Request a core-only reset */
625 retval
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
,
626 AIRCR_VECTKEY
| AIRCR_VECTRESET
);
627 if (retval
!= ERROR_OK
)
629 target
->state
= TARGET_RESET
;
631 /* registers are now invalid */
632 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
634 while (timeout
< 100) {
635 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &dcb_dhcsr
);
636 if (retval
== ERROR_OK
) {
637 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_DFSR
,
638 &cortex_m
->nvic_dfsr
);
639 if (retval
!= ERROR_OK
)
641 if ((dcb_dhcsr
& S_HALT
)
642 && (cortex_m
->nvic_dfsr
& DFSR_VCATCH
)) {
643 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
645 (unsigned) dcb_dhcsr
,
646 (unsigned) cortex_m
->nvic_dfsr
);
647 cortex_m_poll(target
);
648 /* FIXME restore user's vector catch config */
651 LOG_DEBUG("waiting for system reset-halt, "
652 "DHCSR 0x%08x, %d ms",
653 (unsigned) dcb_dhcsr
, timeout
);
662 void cortex_m_enable_breakpoints(struct target
*target
)
664 struct breakpoint
*breakpoint
= target
->breakpoints
;
666 /* set any pending breakpoints */
668 if (!breakpoint
->set
)
669 cortex_m_set_breakpoint(target
, breakpoint
);
670 breakpoint
= breakpoint
->next
;
674 static int cortex_m_resume(struct target
*target
, int current
,
675 target_addr_t address
, int handle_breakpoints
, int debug_execution
)
677 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
678 struct breakpoint
*breakpoint
= NULL
;
682 if (target
->state
!= TARGET_HALTED
) {
683 LOG_WARNING("target not halted");
684 return ERROR_TARGET_NOT_HALTED
;
687 if (!debug_execution
) {
688 target_free_all_working_areas(target
);
689 cortex_m_enable_breakpoints(target
);
690 cortex_m_enable_watchpoints(target
);
693 if (debug_execution
) {
694 r
= armv7m
->arm
.core_cache
->reg_list
+ ARMV7M_PRIMASK
;
696 /* Disable interrupts */
697 /* We disable interrupts in the PRIMASK register instead of
698 * masking with C_MASKINTS. This is probably the same issue
699 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
700 * in parallel with disabled interrupts can cause local faults
703 * REVISIT this clearly breaks non-debug execution, since the
704 * PRIMASK register state isn't saved/restored... workaround
705 * by never resuming app code after debug execution.
707 buf_set_u32(r
->value
, 0, 1, 1);
711 /* Make sure we are in Thumb mode */
712 r
= armv7m
->arm
.cpsr
;
713 buf_set_u32(r
->value
, 24, 1, 1);
718 /* current = 1: continue on current pc, otherwise continue at <address> */
721 buf_set_u32(r
->value
, 0, 32, address
);
726 /* if we halted last time due to a bkpt instruction
727 * then we have to manually step over it, otherwise
728 * the core will break again */
730 if (!breakpoint_find(target
, buf_get_u32(r
->value
, 0, 32))
732 armv7m_maybe_skip_bkpt_inst(target
, NULL
);
734 resume_pc
= buf_get_u32(r
->value
, 0, 32);
736 armv7m_restore_context(target
);
738 /* the front-end may request us not to handle breakpoints */
739 if (handle_breakpoints
) {
740 /* Single step past breakpoint at current address */
741 breakpoint
= breakpoint_find(target
, resume_pc
);
743 LOG_DEBUG("unset breakpoint at " TARGET_ADDR_FMT
" (ID: %" PRIu32
")",
745 breakpoint
->unique_id
);
746 cortex_m_unset_breakpoint(target
, breakpoint
);
747 cortex_m_single_step_core(target
);
748 cortex_m_set_breakpoint(target
, breakpoint
);
753 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
);
755 target
->debug_reason
= DBG_REASON_NOTHALTED
;
757 /* registers are now invalid */
758 register_cache_invalidate(armv7m
->arm
.core_cache
);
760 if (!debug_execution
) {
761 target
->state
= TARGET_RUNNING
;
762 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
763 LOG_DEBUG("target resumed at 0x%" PRIx32
"", resume_pc
);
765 target
->state
= TARGET_DEBUG_RUNNING
;
766 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_RESUMED
);
767 LOG_DEBUG("target debug resumed at 0x%" PRIx32
"", resume_pc
);
773 /* int irqstepcount = 0; */
774 static int cortex_m_step(struct target
*target
, int current
,
775 target_addr_t address
, int handle_breakpoints
)
777 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
778 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
779 struct breakpoint
*breakpoint
= NULL
;
780 struct reg
*pc
= armv7m
->arm
.pc
;
781 bool bkpt_inst_found
= false;
783 bool isr_timed_out
= false;
785 if (target
->state
!= TARGET_HALTED
) {
786 LOG_WARNING("target not halted");
787 return ERROR_TARGET_NOT_HALTED
;
790 /* current = 1: continue on current pc, otherwise continue at <address> */
792 buf_set_u32(pc
->value
, 0, 32, address
);
794 uint32_t pc_value
= buf_get_u32(pc
->value
, 0, 32);
796 /* the front-end may request us not to handle breakpoints */
797 if (handle_breakpoints
) {
798 breakpoint
= breakpoint_find(target
, pc_value
);
800 cortex_m_unset_breakpoint(target
, breakpoint
);
803 armv7m_maybe_skip_bkpt_inst(target
, &bkpt_inst_found
);
805 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
807 armv7m_restore_context(target
);
809 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
811 /* if no bkpt instruction is found at pc then we can perform
812 * a normal step, otherwise we have to manually step over the bkpt
813 * instruction - as such simulate a step */
814 if (bkpt_inst_found
== false) {
815 /* Automatic ISR masking mode off: Just step over the next instruction */
816 if ((cortex_m
->isrmasking_mode
!= CORTEX_M_ISRMASK_AUTO
))
817 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
819 /* Process interrupts during stepping in a way they don't interfere
824 * Set a temporary break point at the current pc and let the core run
825 * with interrupts enabled. Pending interrupts get served and we run
826 * into the breakpoint again afterwards. Then we step over the next
827 * instruction with interrupts disabled.
829 * If the pending interrupts don't complete within time, we leave the
830 * core running. This may happen if the interrupts trigger faster
831 * than the core can process them or the handler doesn't return.
833 * If no more breakpoints are available we simply do a step with
834 * interrupts enabled.
840 * If a break point is already set on the lower half word then a break point on
841 * the upper half word will not break again when the core is restarted. So we
842 * just step over the instruction with interrupts disabled.
844 * The documentation has no information about this, it was found by observation
845 * on STM32F1 and STM32F2. Proper explanation welcome. STM32F0 dosen't seem to
846 * suffer from this problem.
848 * To add some confusion: pc_value has bit 0 always set, while the breakpoint
849 * address has it always cleared. The former is done to indicate thumb mode
853 if ((pc_value
& 0x02) && breakpoint_find(target
, pc_value
& ~0x03)) {
854 LOG_DEBUG("Stepping over next instruction with interrupts disabled");
855 cortex_m_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
856 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
857 /* Re-enable interrupts */
858 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
862 /* Set a temporary break point */
864 retval
= cortex_m_set_breakpoint(target
, breakpoint
);
866 retval
= breakpoint_add(target
, pc_value
, 2, BKPT_HARD
);
867 bool tmp_bp_set
= (retval
== ERROR_OK
);
869 /* No more breakpoints left, just do a step */
871 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
874 LOG_DEBUG("Starting core to serve pending interrupts");
875 int64_t t_start
= timeval_ms();
876 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
);
878 /* Wait for pending handlers to complete or timeout */
880 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
,
882 &cortex_m
->dcb_dhcsr
);
883 if (retval
!= ERROR_OK
) {
884 target
->state
= TARGET_UNKNOWN
;
887 isr_timed_out
= ((timeval_ms() - t_start
) > 500);
888 } while (!((cortex_m
->dcb_dhcsr
& S_HALT
) || isr_timed_out
));
890 /* only remove breakpoint if we created it */
892 cortex_m_unset_breakpoint(target
, breakpoint
);
894 /* Remove the temporary breakpoint */
895 breakpoint_remove(target
, pc_value
);
899 LOG_DEBUG("Interrupt handlers didn't complete within time, "
900 "leaving target running");
902 /* Step over next instruction with interrupts disabled */
903 cortex_m_write_debug_halt_mask(target
,
906 cortex_m_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
907 /* Re-enable interrupts */
908 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
915 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
916 if (retval
!= ERROR_OK
)
919 /* registers are now invalid */
920 register_cache_invalidate(armv7m
->arm
.core_cache
);
923 cortex_m_set_breakpoint(target
, breakpoint
);
926 /* Leave the core running. The user has to stop execution manually. */
927 target
->debug_reason
= DBG_REASON_NOTHALTED
;
928 target
->state
= TARGET_RUNNING
;
932 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
933 " nvic_icsr = 0x%" PRIx32
,
934 cortex_m
->dcb_dhcsr
, cortex_m
->nvic_icsr
);
936 retval
= cortex_m_debug_entry(target
);
937 if (retval
!= ERROR_OK
)
939 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
941 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
942 " nvic_icsr = 0x%" PRIx32
,
943 cortex_m
->dcb_dhcsr
, cortex_m
->nvic_icsr
);
948 static int cortex_m_assert_reset(struct target
*target
)
950 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
951 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
952 enum cortex_m_soft_reset_config reset_config
= cortex_m
->soft_reset_config
;
954 LOG_DEBUG("target->state: %s",
955 target_state_name(target
));
957 enum reset_types jtag_reset_config
= jtag_get_reset_config();
959 if (target_has_event_action(target
, TARGET_EVENT_RESET_ASSERT
)) {
960 /* allow scripts to override the reset event */
962 target_handle_event(target
, TARGET_EVENT_RESET_ASSERT
);
963 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
964 target
->state
= TARGET_RESET
;
969 /* some cores support connecting while srst is asserted
970 * use that mode is it has been configured */
972 bool srst_asserted
= false;
974 if (!target_was_examined(target
)) {
975 if (jtag_reset_config
& RESET_HAS_SRST
) {
976 adapter_assert_reset();
977 if (target
->reset_halt
)
978 LOG_ERROR("Target not examined, will not halt after reset!");
981 LOG_ERROR("Target not examined, reset NOT asserted!");
986 if ((jtag_reset_config
& RESET_HAS_SRST
) &&
987 (jtag_reset_config
& RESET_SRST_NO_GATING
)) {
988 adapter_assert_reset();
989 srst_asserted
= true;
992 /* Enable debug requests */
994 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DHCSR
, &cortex_m
->dcb_dhcsr
);
995 /* Store important errors instead of failing and proceed to reset assert */
997 if (retval
!= ERROR_OK
|| !(cortex_m
->dcb_dhcsr
& C_DEBUGEN
))
998 retval
= cortex_m_write_debug_halt_mask(target
, 0, C_HALT
| C_STEP
| C_MASKINTS
);
1000 /* If the processor is sleeping in a WFI or WFE instruction, the
1001 * C_HALT bit must be asserted to regain control */
1002 if (retval
== ERROR_OK
&& (cortex_m
->dcb_dhcsr
& S_SLEEP
))
1003 retval
= cortex_m_write_debug_halt_mask(target
, C_HALT
, 0);
1005 mem_ap_write_u32(armv7m
->debug_ap
, DCB_DCRDR
, 0);
1006 /* Ignore less important errors */
1008 if (!target
->reset_halt
) {
1009 /* Set/Clear C_MASKINTS in a separate operation */
1010 if (cortex_m
->dcb_dhcsr
& C_MASKINTS
)
1011 cortex_m_write_debug_halt_mask(target
, 0, C_MASKINTS
);
1013 /* clear any debug flags before resuming */
1014 cortex_m_clear_halt(target
);
1016 /* clear C_HALT in dhcsr reg */
1017 cortex_m_write_debug_halt_mask(target
, 0, C_HALT
);
1019 /* Halt in debug on reset; endreset_event() restores DEMCR.
1021 * REVISIT catching BUSERR presumably helps to defend against
1022 * bad vector table entries. Should this include MMERR or
1026 retval2
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
,
1027 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
1028 if (retval
!= ERROR_OK
|| retval2
!= ERROR_OK
)
1029 LOG_INFO("AP write error, reset will not halt");
1032 if (jtag_reset_config
& RESET_HAS_SRST
) {
1033 /* default to asserting srst */
1035 adapter_assert_reset();
1037 /* srst is asserted, ignore AP access errors */
1040 /* Use a standard Cortex-M3 software reset mechanism.
1041 * We default to using VECRESET as it is supported on all current cores.
1042 * This has the disadvantage of not resetting the peripherals, so a
1043 * reset-init event handler is needed to perform any peripheral resets.
1045 LOG_DEBUG("Using Cortex-M %s", (reset_config
== CORTEX_M_RESET_SYSRESETREQ
)
1046 ? "SYSRESETREQ" : "VECTRESET");
1048 if (reset_config
== CORTEX_M_RESET_VECTRESET
) {
1049 LOG_WARNING("Only resetting the Cortex-M core, use a reset-init event "
1050 "handler to reset any peripherals or configure hardware srst support.");
1054 retval3
= mem_ap_write_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
,
1055 AIRCR_VECTKEY
| ((reset_config
== CORTEX_M_RESET_SYSRESETREQ
)
1056 ? AIRCR_SYSRESETREQ
: AIRCR_VECTRESET
));
1057 if (retval3
!= ERROR_OK
)
1058 LOG_DEBUG("Ignoring AP write error right after reset");
1060 retval3
= dap_dp_init(armv7m
->debug_ap
->dap
);
1061 if (retval3
!= ERROR_OK
)
1062 LOG_ERROR("DP initialisation failed");
1065 /* I do not know why this is necessary, but it
1066 * fixes strange effects (step/resume cause NMI
1067 * after reset) on LM3S6918 -- Michael Schwingen
1070 mem_ap_read_atomic_u32(armv7m
->debug_ap
, NVIC_AIRCR
, &tmp
);
1074 target
->state
= TARGET_RESET
;
1075 jtag_add_sleep(50000);
1077 register_cache_invalidate(cortex_m
->armv7m
.arm
.core_cache
);
1079 /* now return stored error code if any */
1080 if (retval
!= ERROR_OK
)
1083 if (target
->reset_halt
) {
1084 retval
= target_halt(target
);
1085 if (retval
!= ERROR_OK
)
1092 static int cortex_m_deassert_reset(struct target
*target
)
1094 struct armv7m_common
*armv7m
= &target_to_cm(target
)->armv7m
;
1096 LOG_DEBUG("target->state: %s",
1097 target_state_name(target
));
1099 /* deassert reset lines */
1100 adapter_deassert_reset();
1102 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1104 if ((jtag_reset_config
& RESET_HAS_SRST
) &&
1105 !(jtag_reset_config
& RESET_SRST_NO_GATING
) &&
1106 target_was_examined(target
)) {
1107 int retval
= dap_dp_init(armv7m
->debug_ap
->dap
);
1108 if (retval
!= ERROR_OK
) {
1109 LOG_ERROR("DP initialisation failed");
1117 int cortex_m_set_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1121 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1122 struct cortex_m_fp_comparator
*comparator_list
= cortex_m
->fp_comparator_list
;
1124 if (breakpoint
->set
) {
1125 LOG_WARNING("breakpoint (BPID: %" PRIu32
") already set", breakpoint
->unique_id
);
1129 if (breakpoint
->type
== BKPT_HARD
) {
1130 uint32_t fpcr_value
;
1131 while (comparator_list
[fp_num
].used
&& (fp_num
< cortex_m
->fp_num_code
))
1133 if (fp_num
>= cortex_m
->fp_num_code
) {
1134 LOG_ERROR("Can not find free FPB Comparator!");
1137 breakpoint
->set
= fp_num
+ 1;
1138 fpcr_value
= breakpoint
->address
| 1;
1139 if (cortex_m
->fp_rev
== 0) {
1141 hilo
= (breakpoint
->address
& 0x2) ? FPCR_REPLACE_BKPT_HIGH
: FPCR_REPLACE_BKPT_LOW
;
1142 fpcr_value
= (fpcr_value
& 0x1FFFFFFC) | hilo
| 1;
1143 } else if (cortex_m
->fp_rev
> 1) {
1144 LOG_ERROR("Unhandled Cortex-M Flash Patch Breakpoint architecture revision");
1147 comparator_list
[fp_num
].used
= 1;
1148 comparator_list
[fp_num
].fpcr_value
= fpcr_value
;
1149 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1150 comparator_list
[fp_num
].fpcr_value
);
1151 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32
"",
1153 comparator_list
[fp_num
].fpcr_value
);
1154 if (!cortex_m
->fpb_enabled
) {
1155 LOG_DEBUG("FPB wasn't enabled, do it now");
1156 retval
= cortex_m_enable_fpb(target
);
1157 if (retval
!= ERROR_OK
) {
1158 LOG_ERROR("Failed to enable the FPB");
1162 cortex_m
->fpb_enabled
= 1;
1164 } else if (breakpoint
->type
== BKPT_SOFT
) {
1167 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
1168 * semihosting; don't use that. Otherwise the BKPT
1169 * parameter is arbitrary.
1171 buf_set_u32(code
, 0, 32, ARMV5_T_BKPT(0x11));
1172 retval
= target_read_memory(target
,
1173 breakpoint
->address
& 0xFFFFFFFE,
1174 breakpoint
->length
, 1,
1175 breakpoint
->orig_instr
);
1176 if (retval
!= ERROR_OK
)
1178 retval
= target_write_memory(target
,
1179 breakpoint
->address
& 0xFFFFFFFE,
1180 breakpoint
->length
, 1,
1182 if (retval
!= ERROR_OK
)
1184 breakpoint
->set
= true;
1187 LOG_DEBUG("BPID: %" PRIu32
", Type: %d, Address: " TARGET_ADDR_FMT
" Length: %d (set=%d)",
1188 breakpoint
->unique_id
,
1189 (int)(breakpoint
->type
),
1190 breakpoint
->address
,
1197 int cortex_m_unset_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1200 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1201 struct cortex_m_fp_comparator
*comparator_list
= cortex_m
->fp_comparator_list
;
1203 if (!breakpoint
->set
) {
1204 LOG_WARNING("breakpoint not set");
1208 LOG_DEBUG("BPID: %" PRIu32
", Type: %d, Address: " TARGET_ADDR_FMT
" Length: %d (set=%d)",
1209 breakpoint
->unique_id
,
1210 (int)(breakpoint
->type
),
1211 breakpoint
->address
,
1215 if (breakpoint
->type
== BKPT_HARD
) {
1216 int fp_num
= breakpoint
->set
- 1;
1217 if ((fp_num
< 0) || (fp_num
>= cortex_m
->fp_num_code
)) {
1218 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1221 comparator_list
[fp_num
].used
= 0;
1222 comparator_list
[fp_num
].fpcr_value
= 0;
1223 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
,
1224 comparator_list
[fp_num
].fpcr_value
);
1226 /* restore original instruction (kept in target endianness) */
1227 if (breakpoint
->length
== 4) {
1228 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 4, 1,
1229 breakpoint
->orig_instr
);
1230 if (retval
!= ERROR_OK
)
1233 retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 2, 1,
1234 breakpoint
->orig_instr
);
1235 if (retval
!= ERROR_OK
)
1239 breakpoint
->set
= false;
1244 int cortex_m_add_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1246 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1248 if ((breakpoint
->type
== BKPT_HARD
) && (cortex_m
->fp_code_available
< 1)) {
1249 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1250 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1253 if (breakpoint
->length
== 3) {
1254 LOG_DEBUG("Using a two byte breakpoint for 32bit Thumb-2 request");
1255 breakpoint
->length
= 2;
1258 if ((breakpoint
->length
!= 2)) {
1259 LOG_INFO("only breakpoints of two bytes length supported");
1260 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1263 if (breakpoint
->type
== BKPT_HARD
)
1264 cortex_m
->fp_code_available
--;
1266 return cortex_m_set_breakpoint(target
, breakpoint
);
1269 int cortex_m_remove_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1271 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1273 /* REVISIT why check? FBP can be updated with core running ... */
1274 if (target
->state
!= TARGET_HALTED
) {
1275 LOG_WARNING("target not halted");
1276 return ERROR_TARGET_NOT_HALTED
;
1279 if (breakpoint
->set
)
1280 cortex_m_unset_breakpoint(target
, breakpoint
);
1282 if (breakpoint
->type
== BKPT_HARD
)
1283 cortex_m
->fp_code_available
++;
1288 int cortex_m_set_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1291 uint32_t mask
, temp
;
1292 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1294 /* watchpoint params were validated earlier */
1296 temp
= watchpoint
->length
;
1303 /* REVISIT Don't fully trust these "not used" records ... users
1304 * may set up breakpoints by hand, e.g. dual-address data value
1305 * watchpoint using comparator #1; comparator #0 matching cycle
1306 * count; send data trace info through ITM and TPIU; etc
1308 struct cortex_m_dwt_comparator
*comparator
;
1310 for (comparator
= cortex_m
->dwt_comparator_list
;
1311 comparator
->used
&& dwt_num
< cortex_m
->dwt_num_comp
;
1312 comparator
++, dwt_num
++)
1314 if (dwt_num
>= cortex_m
->dwt_num_comp
) {
1315 LOG_ERROR("Can not find free DWT Comparator");
1318 comparator
->used
= 1;
1319 watchpoint
->set
= dwt_num
+ 1;
1321 comparator
->comp
= watchpoint
->address
;
1322 target_write_u32(target
, comparator
->dwt_comparator_address
+ 0,
1325 comparator
->mask
= mask
;
1326 target_write_u32(target
, comparator
->dwt_comparator_address
+ 4,
1329 switch (watchpoint
->rw
) {
1331 comparator
->function
= 5;
1334 comparator
->function
= 6;
1337 comparator
->function
= 7;
1340 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1341 comparator
->function
);
1343 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1344 watchpoint
->unique_id
, dwt_num
,
1345 (unsigned) comparator
->comp
,
1346 (unsigned) comparator
->mask
,
1347 (unsigned) comparator
->function
);
1351 int cortex_m_unset_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1353 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1354 struct cortex_m_dwt_comparator
*comparator
;
1357 if (!watchpoint
->set
) {
1358 LOG_WARNING("watchpoint (wpid: %d) not set",
1359 watchpoint
->unique_id
);
1363 dwt_num
= watchpoint
->set
- 1;
1365 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1366 watchpoint
->unique_id
, dwt_num
,
1367 (unsigned) watchpoint
->address
);
1369 if ((dwt_num
< 0) || (dwt_num
>= cortex_m
->dwt_num_comp
)) {
1370 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1374 comparator
= cortex_m
->dwt_comparator_list
+ dwt_num
;
1375 comparator
->used
= 0;
1376 comparator
->function
= 0;
1377 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1378 comparator
->function
);
1380 watchpoint
->set
= false;
1385 int cortex_m_add_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1387 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1389 if (cortex_m
->dwt_comp_available
< 1) {
1390 LOG_DEBUG("no comparators?");
1391 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1394 /* hardware doesn't support data value masking */
1395 if (watchpoint
->mask
!= ~(uint32_t)0) {
1396 LOG_DEBUG("watchpoint value masks not supported");
1397 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1400 /* hardware allows address masks of up to 32K */
1403 for (mask
= 0; mask
< 16; mask
++) {
1404 if ((1u << mask
) == watchpoint
->length
)
1408 LOG_DEBUG("unsupported watchpoint length");
1409 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1411 if (watchpoint
->address
& ((1 << mask
) - 1)) {
1412 LOG_DEBUG("watchpoint address is unaligned");
1413 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1416 /* Caller doesn't seem to be able to describe watching for data
1417 * values of zero; that flags "no value".
1419 * REVISIT This DWT may well be able to watch for specific data
1420 * values. Requires comparator #1 to set DATAVMATCH and match
1421 * the data, and another comparator (DATAVADDR0) matching addr.
1423 if (watchpoint
->value
) {
1424 LOG_DEBUG("data value watchpoint not YET supported");
1425 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1428 cortex_m
->dwt_comp_available
--;
1429 LOG_DEBUG("dwt_comp_available: %d", cortex_m
->dwt_comp_available
);
1434 int cortex_m_remove_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1436 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1438 /* REVISIT why check? DWT can be updated with core running ... */
1439 if (target
->state
!= TARGET_HALTED
) {
1440 LOG_WARNING("target not halted");
1441 return ERROR_TARGET_NOT_HALTED
;
1444 if (watchpoint
->set
)
1445 cortex_m_unset_watchpoint(target
, watchpoint
);
1447 cortex_m
->dwt_comp_available
++;
1448 LOG_DEBUG("dwt_comp_available: %d", cortex_m
->dwt_comp_available
);
1453 void cortex_m_enable_watchpoints(struct target
*target
)
1455 struct watchpoint
*watchpoint
= target
->watchpoints
;
1457 /* set any pending watchpoints */
1458 while (watchpoint
) {
1459 if (!watchpoint
->set
)
1460 cortex_m_set_watchpoint(target
, watchpoint
);
1461 watchpoint
= watchpoint
->next
;
1465 static int cortex_m_load_core_reg_u32(struct target
*target
,
1466 uint32_t num
, uint32_t *value
)
1470 /* NOTE: we "know" here that the register identifiers used
1471 * in the v7m header match the Cortex-M3 Debug Core Register
1472 * Selector values for R0..R15, xPSR, MSP, and PSP.
1476 /* read a normal core register */
1477 retval
= cortexm_dap_read_coreregister_u32(target
, value
, num
);
1479 if (retval
!= ERROR_OK
) {
1480 LOG_ERROR("JTAG failure %i", retval
);
1481 return ERROR_JTAG_DEVICE_ERROR
;
1483 LOG_DEBUG("load from core reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1487 /* Floating-point Status and Registers */
1488 retval
= target_write_u32(target
, DCB_DCRSR
, 0x21);
1489 if (retval
!= ERROR_OK
)
1491 retval
= target_read_u32(target
, DCB_DCRDR
, value
);
1492 if (retval
!= ERROR_OK
)
1494 LOG_DEBUG("load from FPSCR value 0x%" PRIx32
, *value
);
1497 case ARMV7M_S0
... ARMV7M_S31
:
1498 /* Floating-point Status and Registers */
1499 retval
= target_write_u32(target
, DCB_DCRSR
, num
- ARMV7M_S0
+ 0x40);
1500 if (retval
!= ERROR_OK
)
1502 retval
= target_read_u32(target
, DCB_DCRDR
, value
);
1503 if (retval
!= ERROR_OK
)
1505 LOG_DEBUG("load from FPU reg S%d value 0x%" PRIx32
,
1506 (int)(num
- ARMV7M_S0
), *value
);
1509 case ARMV7M_PRIMASK
:
1510 case ARMV7M_BASEPRI
:
1511 case ARMV7M_FAULTMASK
:
1512 case ARMV7M_CONTROL
:
1513 /* Cortex-M3 packages these four registers as bitfields
1514 * in one Debug Core register. So say r0 and r2 docs;
1515 * it was removed from r1 docs, but still works.
1517 cortexm_dap_read_coreregister_u32(target
, value
, 20);
1520 case ARMV7M_PRIMASK
:
1521 *value
= buf_get_u32((uint8_t *)value
, 0, 1);
1524 case ARMV7M_BASEPRI
:
1525 *value
= buf_get_u32((uint8_t *)value
, 8, 8);
1528 case ARMV7M_FAULTMASK
:
1529 *value
= buf_get_u32((uint8_t *)value
, 16, 1);
1532 case ARMV7M_CONTROL
:
1533 *value
= buf_get_u32((uint8_t *)value
, 24, 2);
1537 LOG_DEBUG("load from special reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1541 return ERROR_COMMAND_SYNTAX_ERROR
;
1547 static int cortex_m_store_core_reg_u32(struct target
*target
,
1548 uint32_t num
, uint32_t value
)
1552 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1554 /* NOTE: we "know" here that the register identifiers used
1555 * in the v7m header match the Cortex-M3 Debug Core Register
1556 * Selector values for R0..R15, xPSR, MSP, and PSP.
1560 retval
= cortexm_dap_write_coreregister_u32(target
, value
, num
);
1561 if (retval
!= ERROR_OK
) {
1564 LOG_ERROR("JTAG failure");
1565 r
= armv7m
->arm
.core_cache
->reg_list
+ num
;
1566 r
->dirty
= r
->valid
;
1567 return ERROR_JTAG_DEVICE_ERROR
;
1569 LOG_DEBUG("write core reg %i value 0x%" PRIx32
"", (int)num
, value
);
1573 /* Floating-point Status and Registers */
1574 retval
= target_write_u32(target
, DCB_DCRDR
, value
);
1575 if (retval
!= ERROR_OK
)
1577 retval
= target_write_u32(target
, DCB_DCRSR
, 0x21 | (1<<16));
1578 if (retval
!= ERROR_OK
)
1580 LOG_DEBUG("write FPSCR value 0x%" PRIx32
, value
);
1583 case ARMV7M_S0
... ARMV7M_S31
:
1584 /* Floating-point Status and Registers */
1585 retval
= target_write_u32(target
, DCB_DCRDR
, value
);
1586 if (retval
!= ERROR_OK
)
1588 retval
= target_write_u32(target
, DCB_DCRSR
, (num
- ARMV7M_S0
+ 0x40) | (1<<16));
1589 if (retval
!= ERROR_OK
)
1591 LOG_DEBUG("write FPU reg S%d value 0x%" PRIx32
,
1592 (int)(num
- ARMV7M_S0
), value
);
1595 case ARMV7M_PRIMASK
:
1596 case ARMV7M_BASEPRI
:
1597 case ARMV7M_FAULTMASK
:
1598 case ARMV7M_CONTROL
:
1599 /* Cortex-M3 packages these four registers as bitfields
1600 * in one Debug Core register. So say r0 and r2 docs;
1601 * it was removed from r1 docs, but still works.
1603 cortexm_dap_read_coreregister_u32(target
, ®
, 20);
1606 case ARMV7M_PRIMASK
:
1607 buf_set_u32((uint8_t *)®
, 0, 1, value
);
1610 case ARMV7M_BASEPRI
:
1611 buf_set_u32((uint8_t *)®
, 8, 8, value
);
1614 case ARMV7M_FAULTMASK
:
1615 buf_set_u32((uint8_t *)®
, 16, 1, value
);
1618 case ARMV7M_CONTROL
:
1619 buf_set_u32((uint8_t *)®
, 24, 2, value
);
1623 cortexm_dap_write_coreregister_u32(target
, reg
, 20);
1625 LOG_DEBUG("write special reg %i value 0x%" PRIx32
" ", (int)num
, value
);
1629 return ERROR_COMMAND_SYNTAX_ERROR
;
1635 static int cortex_m_read_memory(struct target
*target
, target_addr_t address
,
1636 uint32_t size
, uint32_t count
, uint8_t *buffer
)
1638 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1640 if (armv7m
->arm
.is_armv6m
) {
1641 /* armv6m does not handle unaligned memory access */
1642 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1643 return ERROR_TARGET_UNALIGNED_ACCESS
;
1646 return mem_ap_read_buf(armv7m
->debug_ap
, buffer
, size
, count
, address
);
1649 static int cortex_m_write_memory(struct target
*target
, target_addr_t address
,
1650 uint32_t size
, uint32_t count
, const uint8_t *buffer
)
1652 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1654 if (armv7m
->arm
.is_armv6m
) {
1655 /* armv6m does not handle unaligned memory access */
1656 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
1657 return ERROR_TARGET_UNALIGNED_ACCESS
;
1660 return mem_ap_write_buf(armv7m
->debug_ap
, buffer
, size
, count
, address
);
1663 static int cortex_m_init_target(struct command_context
*cmd_ctx
,
1664 struct target
*target
)
1666 armv7m_build_reg_cache(target
);
1667 arm_semihosting_init(target
);
1671 void cortex_m_deinit_target(struct target
*target
)
1673 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1675 free(cortex_m
->fp_comparator_list
);
1677 cortex_m_dwt_free(target
);
1678 armv7m_free_reg_cache(target
);
1680 free(target
->private_config
);
1684 int cortex_m_profiling(struct target
*target
, uint32_t *samples
,
1685 uint32_t max_num_samples
, uint32_t *num_samples
, uint32_t seconds
)
1687 struct timeval timeout
, now
;
1688 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1690 bool use_pcsr
= false;
1691 int retval
= ERROR_OK
;
1694 gettimeofday(&timeout
, NULL
);
1695 timeval_add_time(&timeout
, seconds
, 0);
1697 retval
= target_read_u32(target
, DWT_PCSR
, ®_value
);
1698 if (retval
!= ERROR_OK
) {
1699 LOG_ERROR("Error while reading PCSR");
1703 if (reg_value
!= 0) {
1705 LOG_INFO("Starting Cortex-M profiling. Sampling DWT_PCSR as fast as we can...");
1707 LOG_INFO("Starting profiling. Halting and resuming the"
1708 " target as often as we can...");
1709 reg
= register_get_by_name(target
->reg_cache
, "pc", 1);
1712 /* Make sure the target is running */
1713 target_poll(target
);
1714 if (target
->state
== TARGET_HALTED
)
1715 retval
= target_resume(target
, 1, 0, 0, 0);
1717 if (retval
!= ERROR_OK
) {
1718 LOG_ERROR("Error while resuming target");
1722 uint32_t sample_count
= 0;
1726 if (armv7m
&& armv7m
->debug_ap
) {
1727 uint32_t read_count
= max_num_samples
- sample_count
;
1728 if (read_count
> 1024)
1731 retval
= mem_ap_read_buf_noincr(armv7m
->debug_ap
,
1732 (void *)&samples
[sample_count
],
1733 4, read_count
, DWT_PCSR
);
1734 sample_count
+= read_count
;
1736 target_read_u32(target
, DWT_PCSR
, &samples
[sample_count
++]);
1739 target_poll(target
);
1740 if (target
->state
== TARGET_HALTED
) {
1741 reg_value
= buf_get_u32(reg
->value
, 0, 32);
1742 /* current pc, addr = 0, do not handle breakpoints, not debugging */
1743 retval
= target_resume(target
, 1, 0, 0, 0);
1744 samples
[sample_count
++] = reg_value
;
1745 target_poll(target
);
1746 alive_sleep(10); /* sleep 10ms, i.e. <100 samples/second. */
1747 } else if (target
->state
== TARGET_RUNNING
) {
1748 /* We want to quickly sample the PC. */
1749 retval
= target_halt(target
);
1751 LOG_INFO("Target not halted or running");
1757 if (retval
!= ERROR_OK
) {
1758 LOG_ERROR("Error while reading %s", use_pcsr
? "PCSR" : "target pc");
1763 gettimeofday(&now
, NULL
);
1764 if (sample_count
>= max_num_samples
|| timeval_compare(&now
, &timeout
) > 0) {
1765 LOG_INFO("Profiling completed. %" PRIu32
" samples.", sample_count
);
1770 *num_samples
= sample_count
;
1775 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1776 * on r/w if the core is not running, and clear on resume or reset ... or
1777 * at least, in a post_restore_context() method.
1780 struct dwt_reg_state
{
1781 struct target
*target
;
1783 uint8_t value
[4]; /* scratch/cache */
1786 static int cortex_m_dwt_get_reg(struct reg
*reg
)
1788 struct dwt_reg_state
*state
= reg
->arch_info
;
1791 int retval
= target_read_u32(state
->target
, state
->addr
, &tmp
);
1792 if (retval
!= ERROR_OK
)
1795 buf_set_u32(state
->value
, 0, 32, tmp
);
1799 static int cortex_m_dwt_set_reg(struct reg
*reg
, uint8_t *buf
)
1801 struct dwt_reg_state
*state
= reg
->arch_info
;
1803 return target_write_u32(state
->target
, state
->addr
,
1804 buf_get_u32(buf
, 0, reg
->size
));
1813 static const struct dwt_reg dwt_base_regs
[] = {
1814 { DWT_CTRL
, "dwt_ctrl", 32, },
1815 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1816 * increments while the core is asleep.
1818 { DWT_CYCCNT
, "dwt_cyccnt", 32, },
1819 /* plus some 8 bit counters, useful for profiling with TPIU */
1822 static const struct dwt_reg dwt_comp
[] = {
1823 #define DWT_COMPARATOR(i) \
1824 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1825 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1826 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1843 #undef DWT_COMPARATOR
1846 static const struct reg_arch_type dwt_reg_type
= {
1847 .get
= cortex_m_dwt_get_reg
,
1848 .set
= cortex_m_dwt_set_reg
,
1851 static void cortex_m_dwt_addreg(struct target
*t
, struct reg
*r
, const struct dwt_reg
*d
)
1853 struct dwt_reg_state
*state
;
1855 state
= calloc(1, sizeof *state
);
1858 state
->addr
= d
->addr
;
1863 r
->value
= state
->value
;
1864 r
->arch_info
= state
;
1865 r
->type
= &dwt_reg_type
;
1868 void cortex_m_dwt_setup(struct cortex_m_common
*cm
, struct target
*target
)
1871 struct reg_cache
*cache
;
1872 struct cortex_m_dwt_comparator
*comparator
;
1875 target_read_u32(target
, DWT_CTRL
, &dwtcr
);
1876 LOG_DEBUG("DWT_CTRL: 0x%" PRIx32
, dwtcr
);
1878 LOG_DEBUG("no DWT");
1882 cm
->dwt_num_comp
= (dwtcr
>> 28) & 0xF;
1883 cm
->dwt_comp_available
= cm
->dwt_num_comp
;
1884 cm
->dwt_comparator_list
= calloc(cm
->dwt_num_comp
,
1885 sizeof(struct cortex_m_dwt_comparator
));
1886 if (!cm
->dwt_comparator_list
) {
1888 cm
->dwt_num_comp
= 0;
1889 LOG_ERROR("out of mem");
1893 cache
= calloc(1, sizeof *cache
);
1896 free(cm
->dwt_comparator_list
);
1899 cache
->name
= "Cortex-M DWT registers";
1900 cache
->num_regs
= 2 + cm
->dwt_num_comp
* 3;
1901 cache
->reg_list
= calloc(cache
->num_regs
, sizeof *cache
->reg_list
);
1902 if (!cache
->reg_list
) {
1907 for (reg
= 0; reg
< 2; reg
++)
1908 cortex_m_dwt_addreg(target
, cache
->reg_list
+ reg
,
1909 dwt_base_regs
+ reg
);
1911 comparator
= cm
->dwt_comparator_list
;
1912 for (i
= 0; i
< cm
->dwt_num_comp
; i
++, comparator
++) {
1915 comparator
->dwt_comparator_address
= DWT_COMP0
+ 0x10 * i
;
1916 for (j
= 0; j
< 3; j
++, reg
++)
1917 cortex_m_dwt_addreg(target
, cache
->reg_list
+ reg
,
1918 dwt_comp
+ 3 * i
+ j
);
1920 /* make sure we clear any watchpoints enabled on the target */
1921 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8, 0);
1924 *register_get_last_cache_p(&target
->reg_cache
) = cache
;
1925 cm
->dwt_cache
= cache
;
1927 LOG_DEBUG("DWT dwtcr 0x%" PRIx32
", comp %d, watch%s",
1928 dwtcr
, cm
->dwt_num_comp
,
1929 (dwtcr
& (0xf << 24)) ? " only" : "/trigger");
1931 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1932 * implement single-address data value watchpoints ... so we
1933 * won't need to check it later, when asked to set one up.
1937 static void cortex_m_dwt_free(struct target
*target
)
1939 struct cortex_m_common
*cm
= target_to_cm(target
);
1940 struct reg_cache
*cache
= cm
->dwt_cache
;
1942 free(cm
->dwt_comparator_list
);
1943 cm
->dwt_comparator_list
= NULL
;
1944 cm
->dwt_num_comp
= 0;
1947 register_unlink_cache(&target
->reg_cache
, cache
);
1949 if (cache
->reg_list
) {
1950 for (size_t i
= 0; i
< cache
->num_regs
; i
++)
1951 free(cache
->reg_list
[i
].arch_info
);
1952 free(cache
->reg_list
);
1956 cm
->dwt_cache
= NULL
;
1959 #define MVFR0 0xe000ef40
1960 #define MVFR1 0xe000ef44
1962 #define MVFR0_DEFAULT_M4 0x10110021
1963 #define MVFR1_DEFAULT_M4 0x11000011
1965 #define MVFR0_DEFAULT_M7_SP 0x10110021
1966 #define MVFR0_DEFAULT_M7_DP 0x10110221
1967 #define MVFR1_DEFAULT_M7_SP 0x11000011
1968 #define MVFR1_DEFAULT_M7_DP 0x12000011
1970 int cortex_m_examine(struct target
*target
)
1973 uint32_t cpuid
, fpcr
, mvfr0
, mvfr1
;
1975 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
1976 struct adiv5_dap
*swjdp
= cortex_m
->armv7m
.arm
.dap
;
1977 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1979 /* stlink shares the examine handler but does not support
1981 if (!armv7m
->stlink
) {
1982 if (cortex_m
->apsel
< 0) {
1983 /* Search for the MEM-AP */
1984 retval
= dap_find_ap(swjdp
, AP_TYPE_AHB_AP
, &armv7m
->debug_ap
);
1985 if (retval
!= ERROR_OK
) {
1986 LOG_ERROR("Could not find MEM-AP to control the core");
1990 armv7m
->debug_ap
= dap_ap(swjdp
, cortex_m
->apsel
);
1993 /* Leave (only) generic DAP stuff for debugport_init(); */
1994 armv7m
->debug_ap
->memaccess_tck
= 8;
1996 retval
= mem_ap_init(armv7m
->debug_ap
);
1997 if (retval
!= ERROR_OK
)
2001 if (!target_was_examined(target
)) {
2002 target_set_examined(target
);
2004 /* Read from Device Identification Registers */
2005 retval
= target_read_u32(target
, CPUID
, &cpuid
);
2006 if (retval
!= ERROR_OK
)
2010 i
= (cpuid
>> 4) & 0xf;
2012 LOG_DEBUG("Cortex-M%d r%" PRId8
"p%" PRId8
" processor detected",
2013 i
, (uint8_t)((cpuid
>> 20) & 0xf), (uint8_t)((cpuid
>> 0) & 0xf));
2016 rev
= (cpuid
>> 20) & 0xf;
2017 patch
= (cpuid
>> 0) & 0xf;
2018 if ((rev
== 0) && (patch
< 2))
2019 LOG_WARNING("Silicon bug: single stepping will enter pending exception handler!");
2021 LOG_DEBUG("cpuid: 0x%8.8" PRIx32
"", cpuid
);
2024 target_read_u32(target
, MVFR0
, &mvfr0
);
2025 target_read_u32(target
, MVFR1
, &mvfr1
);
2027 /* test for floating point feature on Cortex-M4 */
2028 if ((mvfr0
== MVFR0_DEFAULT_M4
) && (mvfr1
== MVFR1_DEFAULT_M4
)) {
2029 LOG_DEBUG("Cortex-M%d floating point feature FPv4_SP found", i
);
2030 armv7m
->fp_feature
= FPv4_SP
;
2032 } else if (i
== 7) {
2033 target_read_u32(target
, MVFR0
, &mvfr0
);
2034 target_read_u32(target
, MVFR1
, &mvfr1
);
2036 /* test for floating point features on Cortex-M7 */
2037 if ((mvfr0
== MVFR0_DEFAULT_M7_SP
) && (mvfr1
== MVFR1_DEFAULT_M7_SP
)) {
2038 LOG_DEBUG("Cortex-M%d floating point feature FPv5_SP found", i
);
2039 armv7m
->fp_feature
= FPv5_SP
;
2040 } else if ((mvfr0
== MVFR0_DEFAULT_M7_DP
) && (mvfr1
== MVFR1_DEFAULT_M7_DP
)) {
2041 LOG_DEBUG("Cortex-M%d floating point feature FPv5_DP found", i
);
2042 armv7m
->fp_feature
= FPv5_DP
;
2044 } else if (i
== 0) {
2045 /* Cortex-M0 does not support unaligned memory access */
2046 armv7m
->arm
.is_armv6m
= true;
2049 if (armv7m
->fp_feature
== FP_NONE
&&
2050 armv7m
->arm
.core_cache
->num_regs
> ARMV7M_NUM_CORE_REGS_NOFP
) {
2051 /* free unavailable FPU registers */
2054 for (idx
= ARMV7M_NUM_CORE_REGS_NOFP
;
2055 idx
< armv7m
->arm
.core_cache
->num_regs
;
2057 free(armv7m
->arm
.core_cache
->reg_list
[idx
].value
);
2058 free(armv7m
->arm
.core_cache
->reg_list
[idx
].feature
);
2059 free(armv7m
->arm
.core_cache
->reg_list
[idx
].reg_data_type
);
2061 armv7m
->arm
.core_cache
->num_regs
= ARMV7M_NUM_CORE_REGS_NOFP
;
2064 if (!armv7m
->stlink
) {
2065 if (i
== 3 || i
== 4)
2066 /* Cortex-M3/M4 have 4096 bytes autoincrement range,
2067 * s. ARM IHI 0031C: MEM-AP 7.2.2 */
2068 armv7m
->debug_ap
->tar_autoincr_block
= (1 << 12);
2070 /* Cortex-M7 has only 1024 bytes autoincrement range */
2071 armv7m
->debug_ap
->tar_autoincr_block
= (1 << 10);
2074 /* Configure trace modules */
2075 retval
= target_write_u32(target
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
2076 if (retval
!= ERROR_OK
)
2079 if (armv7m
->trace_config
.config_type
!= DISABLED
) {
2080 armv7m_trace_tpiu_config(target
);
2081 armv7m_trace_itm_config(target
);
2084 /* NOTE: FPB and DWT are both optional. */
2087 target_read_u32(target
, FP_CTRL
, &fpcr
);
2088 /* bits [14:12] and [7:4] */
2089 cortex_m
->fp_num_code
= ((fpcr
>> 8) & 0x70) | ((fpcr
>> 4) & 0xF);
2090 cortex_m
->fp_num_lit
= (fpcr
>> 8) & 0xF;
2091 cortex_m
->fp_code_available
= cortex_m
->fp_num_code
;
2092 /* Detect flash patch revision, see RM DDI 0403E.b page C1-817.
2093 Revision is zero base, fp_rev == 1 means Rev.2 ! */
2094 cortex_m
->fp_rev
= (fpcr
>> 28) & 0xf;
2095 free(cortex_m
->fp_comparator_list
);
2096 cortex_m
->fp_comparator_list
= calloc(
2097 cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
,
2098 sizeof(struct cortex_m_fp_comparator
));
2099 cortex_m
->fpb_enabled
= fpcr
& 1;
2100 for (i
= 0; i
< cortex_m
->fp_num_code
+ cortex_m
->fp_num_lit
; i
++) {
2101 cortex_m
->fp_comparator_list
[i
].type
=
2102 (i
< cortex_m
->fp_num_code
) ? FPCR_CODE
: FPCR_LITERAL
;
2103 cortex_m
->fp_comparator_list
[i
].fpcr_address
= FP_COMP0
+ 4 * i
;
2105 /* make sure we clear any breakpoints enabled on the target */
2106 target_write_u32(target
, cortex_m
->fp_comparator_list
[i
].fpcr_address
, 0);
2108 LOG_DEBUG("FPB fpcr 0x%" PRIx32
", numcode %i, numlit %i",
2110 cortex_m
->fp_num_code
,
2111 cortex_m
->fp_num_lit
);
2114 cortex_m_dwt_free(target
);
2115 cortex_m_dwt_setup(cortex_m
, target
);
2117 /* These hardware breakpoints only work for code in flash! */
2118 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
2119 target_name(target
),
2120 cortex_m
->fp_num_code
,
2121 cortex_m
->dwt_num_comp
);
2127 static int cortex_m_dcc_read(struct target
*target
, uint8_t *value
, uint8_t *ctrl
)
2129 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
2134 retval
= mem_ap_read_buf_noincr(armv7m
->debug_ap
, buf
, 2, 1, DCB_DCRDR
);
2135 if (retval
!= ERROR_OK
)
2138 dcrdr
= target_buffer_get_u16(target
, buf
);
2139 *ctrl
= (uint8_t)dcrdr
;
2140 *value
= (uint8_t)(dcrdr
>> 8);
2142 LOG_DEBUG("data 0x%x ctrl 0x%x", *value
, *ctrl
);
2144 /* write ack back to software dcc register
2145 * signify we have read data */
2146 if (dcrdr
& (1 << 0)) {
2147 target_buffer_set_u16(target
, buf
, 0);
2148 retval
= mem_ap_write_buf_noincr(armv7m
->debug_ap
, buf
, 2, 1, DCB_DCRDR
);
2149 if (retval
!= ERROR_OK
)
2156 static int cortex_m_target_request_data(struct target
*target
,
2157 uint32_t size
, uint8_t *buffer
)
2163 for (i
= 0; i
< (size
* 4); i
++) {
2164 int retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2165 if (retval
!= ERROR_OK
)
2173 static int cortex_m_handle_target_request(void *priv
)
2175 struct target
*target
= priv
;
2176 if (!target_was_examined(target
))
2179 if (!target
->dbg_msg_enabled
)
2182 if (target
->state
== TARGET_RUNNING
) {
2187 retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2188 if (retval
!= ERROR_OK
)
2191 /* check if we have data */
2192 if (ctrl
& (1 << 0)) {
2195 /* we assume target is quick enough */
2197 for (int i
= 1; i
<= 3; i
++) {
2198 retval
= cortex_m_dcc_read(target
, &data
, &ctrl
);
2199 if (retval
!= ERROR_OK
)
2201 request
|= ((uint32_t)data
<< (i
* 8));
2203 target_request(target
, request
);
2210 static int cortex_m_init_arch_info(struct target
*target
,
2211 struct cortex_m_common
*cortex_m
, struct adiv5_dap
*dap
)
2213 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
2215 armv7m_init_arch_info(target
, armv7m
);
2217 /* default reset mode is to use srst if fitted
2218 * if not it will use CORTEX_M3_RESET_VECTRESET */
2219 cortex_m
->soft_reset_config
= CORTEX_M_RESET_VECTRESET
;
2221 armv7m
->arm
.dap
= dap
;
2223 /* register arch-specific functions */
2224 armv7m
->examine_debug_reason
= cortex_m_examine_debug_reason
;
2226 armv7m
->post_debug_entry
= NULL
;
2228 armv7m
->pre_restore_context
= NULL
;
2230 armv7m
->load_core_reg_u32
= cortex_m_load_core_reg_u32
;
2231 armv7m
->store_core_reg_u32
= cortex_m_store_core_reg_u32
;
2233 target_register_timer_callback(cortex_m_handle_target_request
, 1, 1, target
);
2238 static int cortex_m_target_create(struct target
*target
, Jim_Interp
*interp
)
2240 struct cortex_m_common
*cortex_m
= calloc(1, sizeof(struct cortex_m_common
));
2241 cortex_m
->common_magic
= CORTEX_M_COMMON_MAGIC
;
2242 struct adiv5_private_config
*pc
;
2244 pc
= (struct adiv5_private_config
*)target
->private_config
;
2245 if (adiv5_verify_config(pc
) != ERROR_OK
)
2248 cortex_m
->apsel
= pc
->ap_num
;
2250 cortex_m_init_arch_info(target
, cortex_m
, pc
->dap
);
2255 /*--------------------------------------------------------------------------*/
2257 static int cortex_m_verify_pointer(struct command_context
*cmd_ctx
,
2258 struct cortex_m_common
*cm
)
2260 if (cm
->common_magic
!= CORTEX_M_COMMON_MAGIC
) {
2261 command_print(cmd_ctx
, "target is not a Cortex-M");
2262 return ERROR_TARGET_INVALID
;
2268 * Only stuff below this line should need to verify that its target
2269 * is a Cortex-M3. Everything else should have indirected through the
2270 * cortexm3_target structure, which is only used with CM3 targets.
2273 static const struct {
2277 { "hard_err", VC_HARDERR
, },
2278 { "int_err", VC_INTERR
, },
2279 { "bus_err", VC_BUSERR
, },
2280 { "state_err", VC_STATERR
, },
2281 { "chk_err", VC_CHKERR
, },
2282 { "nocp_err", VC_NOCPERR
, },
2283 { "mm_err", VC_MMERR
, },
2284 { "reset", VC_CORERESET
, },
2287 COMMAND_HANDLER(handle_cortex_m_vector_catch_command
)
2289 struct target
*target
= get_current_target(CMD_CTX
);
2290 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2291 struct armv7m_common
*armv7m
= &cortex_m
->armv7m
;
2295 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2296 if (retval
!= ERROR_OK
)
2299 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &demcr
);
2300 if (retval
!= ERROR_OK
)
2306 if (CMD_ARGC
== 1) {
2307 if (strcmp(CMD_ARGV
[0], "all") == 0) {
2308 catch = VC_HARDERR
| VC_INTERR
| VC_BUSERR
2309 | VC_STATERR
| VC_CHKERR
| VC_NOCPERR
2310 | VC_MMERR
| VC_CORERESET
;
2312 } else if (strcmp(CMD_ARGV
[0], "none") == 0)
2315 while (CMD_ARGC
-- > 0) {
2317 for (i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2318 if (strcmp(CMD_ARGV
[CMD_ARGC
], vec_ids
[i
].name
) != 0)
2320 catch |= vec_ids
[i
].mask
;
2323 if (i
== ARRAY_SIZE(vec_ids
)) {
2324 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV
[CMD_ARGC
]);
2325 return ERROR_COMMAND_SYNTAX_ERROR
;
2329 /* For now, armv7m->demcr only stores vector catch flags. */
2330 armv7m
->demcr
= catch;
2335 /* write, but don't assume it stuck (why not??) */
2336 retval
= mem_ap_write_u32(armv7m
->debug_ap
, DCB_DEMCR
, demcr
);
2337 if (retval
!= ERROR_OK
)
2339 retval
= mem_ap_read_atomic_u32(armv7m
->debug_ap
, DCB_DEMCR
, &demcr
);
2340 if (retval
!= ERROR_OK
)
2343 /* FIXME be sure to clear DEMCR on clean server shutdown.
2344 * Otherwise the vector catch hardware could fire when there's
2345 * no debugger hooked up, causing much confusion...
2349 for (unsigned i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
2350 command_print(CMD_CTX
, "%9s: %s", vec_ids
[i
].name
,
2351 (demcr
& vec_ids
[i
].mask
) ? "catch" : "ignore");
2357 COMMAND_HANDLER(handle_cortex_m_mask_interrupts_command
)
2359 struct target
*target
= get_current_target(CMD_CTX
);
2360 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2363 static const Jim_Nvp nvp_maskisr_modes
[] = {
2364 { .name
= "auto", .value
= CORTEX_M_ISRMASK_AUTO
},
2365 { .name
= "off", .value
= CORTEX_M_ISRMASK_OFF
},
2366 { .name
= "on", .value
= CORTEX_M_ISRMASK_ON
},
2367 { .name
= NULL
, .value
= -1 },
2372 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2373 if (retval
!= ERROR_OK
)
2376 if (target
->state
!= TARGET_HALTED
) {
2377 command_print(CMD_CTX
, "target must be stopped for \"%s\" command", CMD_NAME
);
2382 n
= Jim_Nvp_name2value_simple(nvp_maskisr_modes
, CMD_ARGV
[0]);
2383 if (n
->name
== NULL
)
2384 return ERROR_COMMAND_SYNTAX_ERROR
;
2385 cortex_m
->isrmasking_mode
= n
->value
;
2388 if (cortex_m
->isrmasking_mode
== CORTEX_M_ISRMASK_ON
)
2389 cortex_m_write_debug_halt_mask(target
, C_HALT
| C_MASKINTS
, 0);
2391 cortex_m_write_debug_halt_mask(target
, C_HALT
, C_MASKINTS
);
2394 n
= Jim_Nvp_value2name_simple(nvp_maskisr_modes
, cortex_m
->isrmasking_mode
);
2395 command_print(CMD_CTX
, "cortex_m interrupt mask %s", n
->name
);
2400 COMMAND_HANDLER(handle_cortex_m_reset_config_command
)
2402 struct target
*target
= get_current_target(CMD_CTX
);
2403 struct cortex_m_common
*cortex_m
= target_to_cm(target
);
2407 retval
= cortex_m_verify_pointer(CMD_CTX
, cortex_m
);
2408 if (retval
!= ERROR_OK
)
2412 if (strcmp(*CMD_ARGV
, "sysresetreq") == 0)
2413 cortex_m
->soft_reset_config
= CORTEX_M_RESET_SYSRESETREQ
;
2414 else if (strcmp(*CMD_ARGV
, "vectreset") == 0)
2415 cortex_m
->soft_reset_config
= CORTEX_M_RESET_VECTRESET
;
2418 switch (cortex_m
->soft_reset_config
) {
2419 case CORTEX_M_RESET_SYSRESETREQ
:
2420 reset_config
= "sysresetreq";
2423 case CORTEX_M_RESET_VECTRESET
:
2424 reset_config
= "vectreset";
2428 reset_config
= "unknown";
2432 command_print(CMD_CTX
, "cortex_m reset_config %s", reset_config
);
2437 static const struct command_registration cortex_m_exec_command_handlers
[] = {
2440 .handler
= handle_cortex_m_mask_interrupts_command
,
2441 .mode
= COMMAND_EXEC
,
2442 .help
= "mask cortex_m interrupts",
2443 .usage
= "['auto'|'on'|'off']",
2446 .name
= "vector_catch",
2447 .handler
= handle_cortex_m_vector_catch_command
,
2448 .mode
= COMMAND_EXEC
,
2449 .help
= "configure hardware vectors to trigger debug entry",
2450 .usage
= "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2453 .name
= "reset_config",
2454 .handler
= handle_cortex_m_reset_config_command
,
2455 .mode
= COMMAND_ANY
,
2456 .help
= "configure software reset handling",
2457 .usage
= "['srst'|'sysresetreq'|'vectreset']",
2459 COMMAND_REGISTRATION_DONE
2461 static const struct command_registration cortex_m_command_handlers
[] = {
2463 .chain
= armv7m_command_handlers
,
2466 .chain
= armv7m_trace_command_handlers
,
2470 .mode
= COMMAND_EXEC
,
2471 .help
= "Cortex-M command group",
2473 .chain
= cortex_m_exec_command_handlers
,
2475 COMMAND_REGISTRATION_DONE
2478 struct target_type cortexm_target
= {
2480 .deprecated_name
= "cortex_m3",
2482 .poll
= cortex_m_poll
,
2483 .arch_state
= armv7m_arch_state
,
2485 .target_request_data
= cortex_m_target_request_data
,
2487 .halt
= cortex_m_halt
,
2488 .resume
= cortex_m_resume
,
2489 .step
= cortex_m_step
,
2491 .assert_reset
= cortex_m_assert_reset
,
2492 .deassert_reset
= cortex_m_deassert_reset
,
2493 .soft_reset_halt
= cortex_m_soft_reset_halt
,
2495 .get_gdb_reg_list
= armv7m_get_gdb_reg_list
,
2497 .read_memory
= cortex_m_read_memory
,
2498 .write_memory
= cortex_m_write_memory
,
2499 .checksum_memory
= armv7m_checksum_memory
,
2500 .blank_check_memory
= armv7m_blank_check_memory
,
2502 .run_algorithm
= armv7m_run_algorithm
,
2503 .start_algorithm
= armv7m_start_algorithm
,
2504 .wait_algorithm
= armv7m_wait_algorithm
,
2506 .add_breakpoint
= cortex_m_add_breakpoint
,
2507 .remove_breakpoint
= cortex_m_remove_breakpoint
,
2508 .add_watchpoint
= cortex_m_add_watchpoint
,
2509 .remove_watchpoint
= cortex_m_remove_watchpoint
,
2511 .commands
= cortex_m_command_handlers
,
2512 .target_create
= cortex_m_target_create
,
2513 .target_jim_configure
= adiv5_jim_configure
,
2514 .init_target
= cortex_m_init_target
,
2515 .examine
= cortex_m_examine
,
2516 .deinit_target
= cortex_m_deinit_target
,
2518 .profiling
= cortex_m_profiling
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)