2 # Config for using Raspberry Pi's expansion header
4 # This is best used with a fast enough buffer but also
5 # is suitable for direct connection if the target voltage
6 # matches RPi's 3.3V and the cable is short enough.
8 # Do not forget the GND connection, pin 6 of the expansion header.
13 # Transition delay calculation: SPEED_COEFF/khz - SPEED_OFFSET
14 # These depend on system clock, calibrated for stock 700MHz
15 # bcm2835gpio_speed SPEED_COEFF SPEED_OFFSET
16 bcm2835gpio_speed_coeffs 113714 28
18 # Each of the JTAG lines need a gpio number set: tck tms tdi tdo
19 # Header pin numbers: 23 22 19 21
20 bcm2835gpio_jtag_nums 11 25 10 9
22 # If you define trst or srst, use appropriate reset_config
23 # Header pin numbers: TRST - 26, SRST - 18
25 # bcm2835gpio_trst_num 7
26 # reset_config trst_only
28 # bcm2835gpio_srst_num 24
29 # reset_config srst_only srst_push_pull
31 # or if you have both connected,
32 # reset_config trst_and_srst srst_push_pull
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)