5 source [find target/swj-dp.tcl]
7 if { [info exists CHIPNAME] } {
8 set _CHIPNAME $CHIPNAME
13 # Work-area is a space in RAM used for flash programming
15 if { [info exists WORKAREASIZE] } {
16 set _WORKAREASIZE $WORKAREASIZE
18 set _WORKAREASIZE 0x800
21 if { [info exists CPUTAPID] } {
22 set _CPUTAPID $CPUTAPID
24 set _CPUTAPID 0x2ba01477
27 swj_newdap $_CHIPNAME cpu -expected-id $_CPUTAPID
31 set _TARGETNAME $_CHIPNAME.cpu
32 target create $_TARGETNAME cortex_m -chain-position $_TARGETNAME
34 $_TARGETNAME configure -work-area-phys 0x10000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
36 set _FLASHNAME $_CHIPNAME.flash
37 flash bank $_FLASHNAME efm32 0 0 0 0 $_TARGETNAME
40 # if srst is not fitted use SYSRESETREQ to
41 # perform a soft reset
42 cortex_m reset_config sysresetreq
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)