testing/test-linuxgpiod-deprecated-commands.cfg

   1 # SPDX-License-Identifier: GPL-2.0-or-later
   2
   3 # OpenOCD script to test that the deprecated "linuxgpiod *" and "linuxgpiod_*"
   4 # commands produce the expected results. Run this command as:
   5 # openocd -f <path>/test-linuxgpiod-deprecated-commands.cfg
   6
   7 # Raise an error if the "actual" value does not match the "expected" value. Trim
   8 # whitespace (including newlines) from strings before comparing.
   9 proc expected_value {expected actual} {
  10         if {[string trim $expected] ne [string trim $actual]} {
  11                 error [puts "ERROR: '${actual}' != '${expected}'"]
  12         }
  13 }
  14
  15 adapter driver linuxgpiod
  16 puts "Driver is '[adapter name]'"
  17 expected_value "linuxgpiod" [adapter name]
  18 echo [adapter gpio]
  19
  20 #####################################
  21 # Test the "linuxgpiod *" commands
  22
  23 # Change the GPIO chip for all signals. Don't check directly here, do so when
  24 # each signal command is tested.
  25 linuxgpiod gpiochip 0
  26
  27 linuxgpiod jtag_nums 1 2 3 4
  28 expected_value "adapter gpio tck (output): num 1, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio tck]
  29 expected_value "adapter gpio tms (output): num 2, chip 0, active-high, push-pull, pull-none, init-state active" [eval adapter gpio tms]
  30 expected_value "adapter gpio tdi (output): num 3, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio tdi]
  31 expected_value "adapter gpio tdo (input): num 4, chip 0, active-high, pull-none, init-state input" [eval adapter gpio tdo]
  32
  33 linuxgpiod tck_num 5
  34 expected_value "adapter gpio tck (output): num 5, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio tck]
  35
  36 linuxgpiod tms_num 6
  37 expected_value "adapter gpio tms (output): num 6, chip 0, active-high, push-pull, pull-none, init-state active" [eval adapter gpio tms]
  38
  39 linuxgpiod tdi_num 7
  40 expected_value "adapter gpio tdi (output): num 7, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio tdi]
  41
  42 linuxgpiod tdo_num 8
  43 expected_value "adapter gpio tdo (input): num 8, chip 0, active-high, pull-none, init-state input" [eval adapter gpio tdo]
  44
  45 linuxgpiod swd_nums 9 10
  46 expected_value "adapter gpio swclk (output): num 9, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio swclk]
  47 expected_value "adapter gpio swdio (bidirectional): num 10, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio swdio]
  48
  49 linuxgpiod swclk_num 11
  50 expected_value "adapter gpio swclk (output): num 11, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio swclk]
  51
  52 linuxgpiod swdio_num 12
  53 expected_value "adapter gpio swdio (bidirectional): num 12, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio swdio]
  54
  55 linuxgpiod swdio_dir_num 13
  56 expected_value "adapter gpio swdio_dir (output): num 13, chip 0, active-high, push-pull, pull-none" [eval adapter gpio swdio_dir]
  57
  58 linuxgpiod srst_num 14
  59 expected_value "adapter gpio srst (output): num 14, chip 0, active-low, pull-none, init-state inactive" [eval adapter gpio srst]
  60
  61 linuxgpiod trst_num 15
  62 expected_value "adapter gpio trst (output): num 15, chip 0, active-low, pull-none, init-state inactive" [eval adapter gpio trst]
  63
  64 linuxgpiod led_num 16
  65 expected_value "adapter gpio led (output): num 16, chip 0, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio led]
  66
  67 #####################################
  68 # Test the old linuxgpiod_* commands
  69
  70 # Change the GPIO chip for all signals. Don't check directly here, do so when
  71 # each signal command is tested.
  72 linuxgpiod_gpiochip 1
  73
  74 linuxgpiod_jtag_nums 17 18 19 20
  75 expected_value "adapter gpio tck (output): num 17, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio tck]
  76 expected_value "adapter gpio tms (output): num 18, chip 1, active-high, push-pull, pull-none, init-state active" [eval adapter gpio tms]
  77 expected_value "adapter gpio tdi (output): num 19, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio tdi]
  78 expected_value "adapter gpio tdo (input): num 20, chip 1, active-high, pull-none, init-state input" [eval adapter gpio tdo]
  79
  80 linuxgpiod_tck_num 21
  81 expected_value "adapter gpio tck (output): num 21, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio tck]
  82
  83 linuxgpiod_tms_num 22
  84 expected_value "adapter gpio tms (output): num 22, chip 1, active-high, push-pull, pull-none, init-state active" [eval adapter gpio tms]
  85
  86 linuxgpiod_tdi_num 23
  87 expected_value "adapter gpio tdi (output): num 23, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio tdi]
  88
  89 linuxgpiod_tdo_num 24
  90 expected_value "adapter gpio tdo (input): num 24, chip 1, active-high, pull-none, init-state input" [eval adapter gpio tdo]
  91
  92 linuxgpiod_swd_nums 25 26
  93 expected_value "adapter gpio swclk (output): num 25, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio swclk]
  94 expected_value "adapter gpio swdio (bidirectional): num 26, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio swdio]
  95
  96 linuxgpiod_swclk_num 27
  97 expected_value "adapter gpio swclk (output): num 27, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio swclk]
  98
  99 linuxgpiod_swdio_num 28
 100 expected_value "adapter gpio swdio (bidirectional): num 28, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio swdio]
 101
 102 linuxgpiod_led_num 29
 103 expected_value "adapter gpio led (output): num 29, chip 1, active-high, push-pull, pull-none, init-state inactive" [eval adapter gpio led]
 104
 105 puts "SUCCESS"