Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
jtag: drivers: xlnx-pcie-xvc: Add support for SWD mode.
[openocd.git] / configure.ac
diff --git a/configure.ac b/configure.ac
index e86d33f88a7b02162e4bf906b0ee97ff4eaf0678..a6bda8856cdf3f5b4b6d79b33855358fcab0769d 100644 (file)
--- a/configure.ac
+++ b/configure.ac
@@ -116,10 +116,8 @@ m4_define([USB1_ADAPTERS],
        [[usb_blaster_2], [Altera USB-Blaster II Compatible], [USB_BLASTER_2]],
        [[ft232r], [Bitbang mode of FT232R based devices], [FT232R]],
        [[vsllink], [Versaloon-Link JTAG Programmer], [VSLLINK]],
-       [[xds110], [TI XDS110 Debug Probe], [XDS110]]])
-
-m4_define([USB_ADAPTERS],
-       [[[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
+       [[xds110], [TI XDS110 Debug Probe], [XDS110]],
+       [[osbdm], [OSBDM (JTAG only) Programmer], [OSBDM]],
        [[opendous], [eStick/opendous JTAG Programmer], [OPENDOUS]],
        [[aice], [Andes JTAG Programmer], [AICE]]])
 
@@ -224,6 +222,10 @@ AC_ARG_ENABLE([dummy],
   AS_HELP_STRING([--enable-dummy], [Enable building the dummy port driver]),
   [build_dummy=$enableval], [build_dummy=no])
 
+AC_ARG_ENABLE([rshim],
+  AS_HELP_STRING([--enable-rshim], [Enable building the rshim driver]),
+  [build_rshim=$enableval], [build_rshim=no])
+
 m4_define([AC_ARG_ADAPTERS], [
   m4_foreach([adapter], [$1],
        [AC_ARG_ENABLE(ADAPTER_OPT([adapter]),
@@ -235,7 +237,6 @@ m4_define([AC_ARG_ADAPTERS], [
 
 AC_ARG_ADAPTERS([
   USB1_ADAPTERS,
-  USB_ADAPTERS,
   USB0_ADAPTERS,
   HIDAPI_ADAPTERS,
   HIDAPI_USB1_ADAPTERS,
@@ -277,6 +278,20 @@ AC_ARG_ENABLE([ioutil],
   AS_HELP_STRING([--enable-ioutil], [Enable ioutil functions - useful for standalone OpenOCD implementations]),
   [build_ioutil=$enableval], [build_ioutil=no])
 
+AS_CASE(["${host_cpu}"],
+  [arm*|aarch64], [
+    AC_ARG_ENABLE([bcm2835gpio],
+      AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
+      [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
+    AC_ARG_ENABLE([imx_gpio],
+      AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
+      [build_imx_gpio=$enableval], [build_imx_gpio=no])
+  ],
+  [
+    build_bcm2835gpio=no
+    build_imx_gpio=no
+])
+
 AS_CASE(["${host_cpu}"],
   [arm*], [
     AC_ARG_ENABLE([ep93xx],
@@ -286,19 +301,10 @@ AS_CASE(["${host_cpu}"],
     AC_ARG_ENABLE([at91rm9200],
       AS_HELP_STRING([--enable-at91rm9200], [Enable building support for AT91RM9200 based SBCs]),
       [build_at91rm9200=$enableval], [build_at91rm9200=no])
-
-    AC_ARG_ENABLE([bcm2835gpio],
-      AS_HELP_STRING([--enable-bcm2835gpio], [Enable building support for bitbanging on BCM2835 (as found in Raspberry Pi)]),
-      [build_bcm2835gpio=$enableval], [build_bcm2835gpio=no])
-    AC_ARG_ENABLE([imx_gpio],
-      AS_HELP_STRING([--enable-imx_gpio], [Enable building support for bitbanging on NXP IMX processors]),
-      [build_imx_gpio=$enableval], [build_imx_gpio=no])
   ],
   [
     build_ep93xx=no
     build_at91rm9200=no
-    build_bcm2835gpio=no
-    build_imx_gpio=no
 ])
 
 AC_ARG_ENABLE([gw16012],
@@ -332,6 +338,13 @@ AS_CASE([$host_os],
     AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
       AC_MSG_ERROR([xlnx_pcie_xvc is only available on linux])
     ])
+
+    AS_CASE([$host_os], [freebsd*], [],
+    [
+      AS_IF([test "x$build_rshim" = "xyes"], [
+        AC_MSG_ERROR([build_rshim is only available on linux or freebsd])
+      ])
+    ])
 ])
 
 AC_ARG_ENABLE([minidriver_dummy],
@@ -347,10 +360,6 @@ AC_ARG_ENABLE([internal-libjaylink],
   [Disable building internal libjaylink]),
   [use_internal_libjaylink=$enableval], [use_internal_libjaylink=yes])
 
-AC_ARG_ENABLE([target64],
-  AS_HELP_STRING([--disable-target64], [Disable 64-bit target address]),
-    [build_target64=$enableval], [build_target64=yes])
-
 build_minidriver=no
 AC_MSG_CHECKING([whether to enable ZY1000 minidriver])
 AS_IF([test "x$build_zy1000" = "xyes"], [
@@ -480,6 +489,12 @@ AS_IF([test "x$build_parport" = "xyes"], [
   AC_DEFINE([BUILD_PARPORT], [0], [0 if you don't want parport.])
 ])
 
+AS_IF([test "x$build_rshim" = "xyes"], [
+  AC_DEFINE([BUILD_RSHIM], [1], [1 if you want to debug BlueField SoC via rshim.])
+], [
+  AC_DEFINE([BUILD_RSHIM], [0], [0 if you don't want to debug BlueField SoC via rshim.])
+])
+
 AS_IF([test "x$build_dummy" = "xyes"], [
   build_bitbang=yes
   AC_DEFINE([BUILD_DUMMY], [1], [1 if you want dummy driver.])
@@ -598,13 +613,6 @@ AS_IF([test "x$build_xlnx_pcie_xvc" = "xyes"], [
   AC_DEFINE([BUILD_XLNX_PCIE_XVC], [0], [0 if you don't want Xilinx XVC/PCIe driver.])
 ])
 
-AS_IF([test "x$build_target64" = "xyes"], [
-  AC_DEFINE([BUILD_TARGET64], [1], [1 if you want 64-bit addresses.])
-], [
-  AC_DEFINE([BUILD_TARGET64], [0], [0 if you don't want 64-bit addresses.])
-])
-
-
 PKG_CHECK_MODULES([LIBUSB1], [libusb-1.0], [
        use_libusb1=yes
        AC_DEFINE([HAVE_LIBUSB1], [1], [Define if you have libusb-1.x])
@@ -660,7 +668,6 @@ m4_define([PROCESS_ADAPTERS], [
 ])
 
 PROCESS_ADAPTERS([USB1_ADAPTERS], ["x$use_libusb1" = "xyes"], [libusb-1.x])
-PROCESS_ADAPTERS([USB_ADAPTERS], ["x$use_libusb1" = "xyes" -o "x$use_libusb0" = "xyes"], [libusb-1.x or libusb-0.1])
 PROCESS_ADAPTERS([USB0_ADAPTERS], ["x$use_libusb0" = "xyes"], [libusb-0.1])
 PROCESS_ADAPTERS([HIDAPI_ADAPTERS], ["x$use_hidapi" = "xyes"], [hidapi])
 PROCESS_ADAPTERS([HIDAPI_USB1_ADAPTERS], ["x$use_hidapi" = "xyes" -a "x$use_libusb1" = "xyes"], [hidapi and libusb-1.x])
@@ -728,7 +735,7 @@ AM_CONDITIONAL([BITQ], [test "x$build_bitq" = "xyes"])
 AM_CONDITIONAL([USE_LIBFTDI], [test "x$use_libftdi" = "xyes"])
 AM_CONDITIONAL([USE_HIDAPI], [test "x$use_hidapi" = "xyes"])
 AM_CONDITIONAL([USE_LIBJAYLINK], [test "x$use_libjaylink" = "xyes"])
-AM_CONDITIONAL([TARGET64], [test "x$build_target64" = "xyes"])
+AM_CONDITIONAL([RSHIM], [test "x$build_rshim" = "xyes"])
 
 AM_CONDITIONAL([MINIDRIVER], [test "x$build_minidriver" = "xyes"])
 AM_CONDITIONAL([MINIDRIVER_DUMMY], [test "x$build_minidriver_dummy" = "xyes"])
@@ -795,7 +802,7 @@ echo
 echo
 echo OpenOCD configuration summary
 echo --------------------------------------------------
-m4_foreach([adapter], [USB1_ADAPTERS, USB_ADAPTERS, USB0_ADAPTERS,
+m4_foreach([adapter], [USB1_ADAPTERS, USB0_ADAPTERS,
        HIDAPI_ADAPTERS, HIDAPI_USB1_ADAPTERS, LIBFTDI_ADAPTERS,
        LIBJAYLINK_ADAPTERS, PCIE_ADAPTERS],
        [s=m4_format(["%-40s"], ADAPTER_DESC([adapter]))
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)