flash/nor: use target_addr_t for flash bank base

[openocd.git] / src / flash / nor / stm32lx.c

diff --git a/src/flash/nor/stm32lx.c b/src/flash/nor/stm32lx.c
index 3251df3fcfe6f44abacba341ff6875f02d724e54..814df8f6faacbe749fdef9da0b78b9f735ed6d9e 100644 (file)
--- a/src/flash/nor/stm32lx.c
+++ b/src/flash/nor/stm32lx.c
@@ -424,13 +424,6 @@ static int stm32lx_erase(struct flash_bank *bank, int first, int last)
        return ERROR_OK;
 }
 
-static int stm32lx_protect(struct flash_bank *bank, int set, int first,
-               int last)
-{
-       LOG_WARNING("protection of the STM32L flash is not implemented");
-       return ERROR_OK;
-}
-
 static int stm32lx_write_half_pages(struct flash_bank *bank, const uint8_t *buffer,
                uint32_t offset, uint32_t count)
 {
@@ -823,8 +816,9 @@ static int stm32lx_probe(struct flash_bank *bank)
                        /* This is the first bank */
                        flash_size_in_kb = stm32lx_info->part_info.first_bank_size_kb;
                } else {
-                       LOG_WARNING("STM32L flash bank base address config is incorrect."
-                                   " 0x%" PRIx32 " but should rather be 0x%" PRIx32 " or 0x%" PRIx32,
+                       LOG_WARNING("STM32L flash bank base address config is incorrect. "
+                                       TARGET_ADDR_FMT " but should rather be 0x%" PRIx32
+                                       " or 0x%" PRIx32,
                                                bank->base, base_address, second_bank_base);
                        return ERROR_FAIL;
                }
@@ -862,7 +856,7 @@ static int stm32lx_probe(struct flash_bank *bank)
                bank->sectors[i].offset = i * FLASH_SECTOR_SIZE;
                bank->sectors[i].size = FLASH_SECTOR_SIZE;
                bank->sectors[i].is_erased = -1;
-               bank->sectors[i].is_protected = 1;
+               bank->sectors[i].is_protected = -1;
        }
 
        stm32lx_info->probed = 1;
@@ -955,7 +949,6 @@ struct flash_driver stm32lx_flash = {
                .commands = stm32lx_command_handlers,
                .flash_bank_command = stm32lx_flash_bank_command,
                .erase = stm32lx_erase,
-               .protect = stm32lx_protect,
                .write = stm32lx_write,
                .read = default_flash_read,
                .probe = stm32lx_probe,