jtag: fix minor typos

[openocd.git] / src / jtag / drivers / kitprog.c

diff --git a/src/jtag/drivers/kitprog.c b/src/jtag/drivers/kitprog.c
index 28ed7ac619548204a55ab2a5d9be414a42a1ea2d..4f38d195d57f93a6a197a1c6557f66ff84053411 100644 (file)
--- a/src/jtag/drivers/kitprog.c
+++ b/src/jtag/drivers/kitprog.c
@@ -358,7 +358,7 @@ static int kitprog_get_version(void)
        unsigned char command[3] = {HID_TYPE_START | HID_TYPE_WRITE, 0x00, HID_COMMAND_VERSION};
        unsigned char data[64];
 
-       ret = kitprog_hid_command(command, sizeof command, data, sizeof data);
+       ret = kitprog_hid_command(command, sizeof(command), data, sizeof(data));
        if (ret != ERROR_OK)
                return ret;
 
@@ -376,7 +376,7 @@ static int kitprog_get_millivolts(void)
        unsigned char command[3] = {HID_TYPE_START | HID_TYPE_READ, 0x00, HID_COMMAND_POWER};
        unsigned char data[64];
 
-       ret = kitprog_hid_command(command, sizeof command, data, sizeof data);
+       ret = kitprog_hid_command(command, sizeof(command), data, sizeof(data));
        if (ret != ERROR_OK)
                return ret;
 
@@ -603,10 +603,10 @@ static int kitprog_generic_acquire(void)
         * will take the Cortex-M3 out of reset and enable debugging.
         */
        for (int i = 0; i < 2; i++) {
-               for (uint8_t j = 0; j < sizeof devices && acquire_count == i; j++) {
+               for (uint8_t j = 0; j < sizeof(devices) && acquire_count == i; j++) {
                        retval = kitprog_acquire_psoc(devices[j], ACQUIRE_MODE_RESET, 3);
                        if (retval != ERROR_OK) {
-                               LOG_DEBUG("Aquisition function failed for device 0x%02x.", devices[j]);
+                               LOG_DEBUG("Acquisition function failed for device 0x%02x.", devices[j]);
                                return retval;
                        }
 
@@ -746,7 +746,7 @@ static int kitprog_swd_run_queue(void)
                 * size (64 bytes) as required by the USB specification.
                 * Therefore libusb would wait for continuation of transmission.
                 * Workaround: Limit bulk read size to expected number of bytes
-                * for problematic tranfer sizes. Otherwise use the maximum buffer
+                * for problematic transfer sizes. Otherwise use the maximum buffer
                 * size here because the KitProg sometimes doesn't like bulk reads
                 * of fewer than 62 bytes. (?!?!)
                 */