/***************************************************************************
+ * Copyright (C) 2020 by Tarek Bochkati *
+ * Tarek Bochkati <tarek.bouchkati@gmail.com> *
+ * *
* SWIM contributions by Ake Rehnman *
* Copyright (C) 2017 Ake Rehnman *
* ake.rehnman(at)gmail.com *
/* project specific includes */
#include <helper/binarybuffer.h>
#include <helper/bits.h>
+#include <helper/system.h>
#include <jtag/interface.h>
#include <jtag/hla/hla_layout.h>
#include <jtag/hla/hla_transport.h>
#include <target/cortex_m.h>
+#include <helper/system.h>
+
+#ifdef HAVE_ARPA_INET_H
+#include <arpa/inet.h>
+#endif
+
+#ifdef HAVE_NETINET_TCP_H
+#include <netinet/tcp.h>
+#endif
+
#include "libusb_helper.h"
#ifdef HAVE_LIBUSB1
uint32_t flags;
};
-/** */
-struct stlink_usb_handle_s {
+struct stlink_usb_priv_s {
/** */
struct libusb_device_handle *fd;
/** */
struct libusb_transfer *trans;
+};
+
+struct stlink_tcp_priv_s {
+ /** */
+ int fd;
+ /** */
+ bool connected;
+ /** */
+ uint32_t device_id;
+ /** */
+ uint32_t connect_id;
+ /** */
+ uint8_t *send_buf;
+ /** */
+ uint8_t *recv_buf;
+};
+
+struct stlink_backend_s {
+ /** */
+ int (*open)(void *handle, struct hl_interface_param_s *param);
+ /** */
+ int (*close)(void *handle);
+ /** */
+ int (*xfer_noerrcheck)(void *handle, const uint8_t *buf, int size);
+ /** */
+ int (*read_trace)(void *handle, const uint8_t *buf, int size);
+};
+
+/** */
+struct stlink_usb_handle_s {
+ /** */
+ struct stlink_backend_s *backend;
+ /** */
+ union {
+ struct stlink_usb_priv_s usb_backend_priv;
+ struct stlink_tcp_priv_s tcp_backend_priv;
+ };
/** */
uint8_t rx_ep;
/** */
/** */
uint8_t trace_ep;
/** */
- uint8_t cmdbuf[STLINK_SG_SIZE];
+ uint8_t *cmdbuf;
/** */
uint8_t cmdidx;
/** */
uint8_t direction;
/** */
- uint8_t databuf[STLINK_DATA_SIZE];
+ uint8_t *databuf;
/** */
uint32_t max_mem_packet;
/** */
bool reconnect_pending;
};
+/** */
+static inline int stlink_usb_open(void *handle, struct hl_interface_param_s *param)
+{
+ struct stlink_usb_handle_s *h = handle;
+ return h->backend->open(handle, param);
+}
+
+/** */
+static inline int stlink_usb_close(void *handle)
+{
+ struct stlink_usb_handle_s *h = handle;
+ return h->backend->close(handle);
+}
+/** */
+static inline int stlink_usb_xfer_noerrcheck(void *handle, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+ return h->backend->xfer_noerrcheck(handle, buf, size);
+}
+
#define STLINK_SWIM_ERR_OK 0x00
#define STLINK_SWIM_BUSY 0x01
#define STLINK_DEBUG_ERR_OK 0x80
#define REQUEST_SENSE 0x03
#define REQUEST_SENSE_LENGTH 18
+/* STLINK TCP commands */
+#define STLINK_TCP_CMD_REFRESH_DEVICE_LIST 0x00
+#define STLINK_TCP_CMD_GET_NB_DEV 0x01
+#define STLINK_TCP_CMD_GET_DEV_INFO 0x02
+#define STLINK_TCP_CMD_OPEN_DEV 0x03
+#define STLINK_TCP_CMD_CLOSE_DEV 0x04
+#define STLINK_TCP_CMD_SEND_USB_CMD 0x05
+#define STLINK_TCP_CMD_GET_SERVER_VERSION 0x06
+#define STLINK_TCP_CMD_GET_NB_OF_DEV_CLIENTS 0x07
+
+/* STLINK TCP constants */
+#define OPENOCD_STLINK_TCP_API_VERSION 1
+#define STLINK_TCP_REQUEST_WRITE 0
+#define STLINK_TCP_REQUEST_READ 1
+#define STLINK_TCP_REQUEST_READ_SWO 3
+#define STLINK_TCP_SS_SIZE 4
+#define STLINK_TCP_USB_CMD_SIZE 32
+#define STLINK_TCP_SERIAL_SIZE 32
+#define STLINK_TCP_SEND_BUFFER_SIZE 10240
+#define STLINK_TCP_RECV_BUFFER_SIZE 10240
+
+/* STLINK TCP command status */
+#define STLINK_TCP_SS_OK 0x00000001
+#define STLINK_TCP_SS_MEMORY_PROBLEM 0x00001000
+#define STLINK_TCP_SS_TIMEOUT 0x00001001
+#define STLINK_TCP_SS_BAD_PARAMETER 0x00001002
+#define STLINK_TCP_SS_OPEN_ERR 0x00001003
+#define STLINK_TCP_SS_TRUNCATED_DATA 0x00001052
+#define STLINK_TCP_SS_CMD_NOT_AVAILABLE 0x00001053
+#define STLINK_TCP_SS_TCP_ERROR 0x00002001
+#define STLINK_TCP_SS_TCP_CANT_CONNECT 0x00002002
+#define STLINK_TCP_SS_WIN32_ERROR 0x00010000
+
/*
* Map the relevant features, quirks and workaround for specific firmware
* version of stlink
/* aliases */
#define STLINK_F_HAS_TARGET_VOLT STLINK_F_HAS_TRACE
+#define STLINK_F_HAS_FPU_REG STLINK_F_HAS_GETLASTRWSTATUS2
+
+#define STLINK_REGSEL_IS_FPU(x) ((x) > 0x1F)
struct speed_map {
int speed;
return STLINK_MAX_RW8;
}
-
-
#ifdef USE_LIBUSB_ASYNCIO
static LIBUSB_CALL void sync_transfer_cb(struct libusb_transfer *transfer)
/* read status */
memset(h->cmdbuf, 0, STLINK_SG_SIZE);
- ret = jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)h->cmdbuf, 13,
+ ret = jtag_libusb_bulk_read(h->usb_backend_priv.fd, h->rx_ep, (char *)h->cmdbuf, 13,
STLINK_READ_TIMEOUT, &tr);
if (ret || tr != 13)
return ERROR_FAIL;
}
return jtag_libusb_bulk_transfer_n(
- h->fd,
+ h->usb_backend_priv.fd,
transfers,
n_transfers,
STLINK_WRITE_TIMEOUT);
assert(handle != NULL);
- ret = jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)h->cmdbuf,
+ ret = jtag_libusb_bulk_write(h->usb_backend_priv.fd, h->tx_ep, (char *)h->cmdbuf,
cmdsize, STLINK_WRITE_TIMEOUT, &tr);
if (ret || tr != cmdsize)
return ERROR_FAIL;
if (h->direction == h->tx_ep && size) {
- ret = jtag_libusb_bulk_write(h->fd, h->tx_ep, (char *)buf,
+ ret = jtag_libusb_bulk_write(h->usb_backend_priv.fd, h->tx_ep, (char *)buf,
size, STLINK_WRITE_TIMEOUT, &tr);
if (ret || tr != size) {
LOG_DEBUG("bulk write failed");
return ERROR_FAIL;
}
} else if (h->direction == h->rx_ep && size) {
- ret = jtag_libusb_bulk_read(h->fd, h->rx_ep, (char *)buf,
+ ret = jtag_libusb_bulk_read(h->usb_backend_priv.fd, h->rx_ep, (char *)buf,
size, STLINK_READ_TIMEOUT, &tr);
if (ret || tr != size) {
LOG_DEBUG("bulk read failed");
return ERROR_OK;
}
+/** */
+static int stlink_usb_usb_read_trace(void *handle, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int tr, ret;
+
+ ret = jtag_libusb_bulk_read(h->usb_backend_priv.fd, h->trace_ep, (char *)buf, size,
+ STLINK_READ_TIMEOUT, &tr);
+ if (ret || tr != size) {
+ LOG_ERROR("bulk trace read failed");
+ return ERROR_FAIL;
+ }
+
+ return ERROR_OK;
+}
+
/*
transfers block in cmdbuf
<size> indicates number of bytes in the following
data phase.
Ignore the (eventual) error code in the received packet.
*/
-static int stlink_usb_xfer_noerrcheck(void *handle, const uint8_t *buf, int size)
+static int stlink_usb_usb_xfer_noerrcheck(void *handle, const uint8_t *buf, int size)
{
int err, cmdsize = STLINK_CMD_SIZE_V2;
struct stlink_usb_handle_s *h = handle;
return ERROR_OK;
}
+
+static int stlink_tcp_send_cmd(void *handle, int send_size, int recv_size, bool check_tcp_status)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ assert(handle != NULL);
+
+ /* send the TCP command */
+ int sent_size = send(h->tcp_backend_priv.fd, (void *)h->tcp_backend_priv.send_buf, send_size, 0);
+ if (sent_size != send_size) {
+ LOG_ERROR("failed to send USB CMD");
+ if (sent_size == -1)
+ LOG_DEBUG("socket send error: %s (errno %d)", strerror(errno), errno);
+ else
+ LOG_DEBUG("sent size %d (expected %d)", sent_size, send_size);
+ return ERROR_FAIL;
+ }
+
+ keep_alive();
+
+ /* read the TCP response */
+ int received_size = recv(h->tcp_backend_priv.fd, (void *)h->tcp_backend_priv.recv_buf, recv_size, 0);
+ if (received_size != recv_size) {
+ LOG_ERROR("failed to receive USB CMD response");
+ if (received_size == -1)
+ LOG_DEBUG("socket recv error: %s (errno %d)", strerror(errno), errno);
+ else
+ LOG_DEBUG("received size %d (expected %d)", received_size, recv_size);
+ return ERROR_FAIL;
+ }
+
+ if (check_tcp_status) {
+ uint32_t tcp_ss = le_to_h_u32(h->tcp_backend_priv.recv_buf);
+ if (tcp_ss != STLINK_TCP_SS_OK) {
+ LOG_ERROR("TCP error status 0x%X", tcp_ss);
+ return ERROR_FAIL;
+ }
+ }
+
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_tcp_xfer_noerrcheck(void *handle, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ int send_size = STLINK_TCP_USB_CMD_SIZE;
+ int recv_size = STLINK_TCP_SS_SIZE;
+
+ assert(handle != NULL);
+
+ /* prepare the TCP command */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_SEND_USB_CMD;
+ memset(&h->tcp_backend_priv.send_buf[1], 0, 3); /* reserved for alignment and future use, must be zero */
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[4], h->tcp_backend_priv.connect_id);
+ /* tcp_backend_priv.send_buf[8..23] already contains the constructed stlink command */
+ h->tcp_backend_priv.send_buf[24] = h->direction;
+ memset(&h->tcp_backend_priv.send_buf[25], 0, 3); /* reserved for alignment and future use, must be zero */
+
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[28], size);
+
+ /*
+ * if the xfer is a write request (tx_ep)
+ * > then buf content will be copied
+ * into &cmdbuf[32].
+ * else : the xfer is a read or trace read request (rx_ep or trace_ep)
+ * > the buf content will be filled from &databuf[4].
+ *
+ * note : if h->direction is trace_ep, h->cmdbuf is zeros.
+ */
+
+ if (h->direction == h->tx_ep) { /* STLINK_TCP_REQUEST_WRITE */
+ send_size += size;
+ if (send_size > STLINK_TCP_SEND_BUFFER_SIZE) {
+ LOG_ERROR("STLINK_TCP command buffer overflow");
+ return ERROR_FAIL;
+ }
+ memcpy(&h->tcp_backend_priv.send_buf[32], buf, size);
+ } else { /* STLINK_TCP_REQUEST_READ or STLINK_TCP_REQUEST_READ_SWO */
+ recv_size += size;
+ if (recv_size > STLINK_TCP_RECV_BUFFER_SIZE) {
+ LOG_ERROR("STLINK_TCP data buffer overflow");
+ return ERROR_FAIL;
+ }
+ }
+
+ int ret = stlink_tcp_send_cmd(h, send_size, recv_size, true);
+ if (ret != ERROR_OK)
+ return ret;
+
+ if (h->direction != h->tx_ep) {
+ /* the read data is located in tcp_backend_priv.recv_buf[4] */
+ /* most of the case it will be copying the data from tcp_backend_priv.recv_buf[4]
+ * to handle->cmd_buff which are the same, so let's avoid unnecessary copying */
+ if (buf != &h->tcp_backend_priv.recv_buf[4])
+ memcpy((uint8_t *)buf, &h->tcp_backend_priv.recv_buf[4], size);
+ }
+
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_tcp_read_trace(void *handle, const uint8_t *buf, int size)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ stlink_usb_init_buffer(h, h->trace_ep, 0);
+ return stlink_tcp_xfer_noerrcheck(handle, buf, size);
+}
+
/**
Converts an STLINK status code held in the first byte of a response
to an openocd error, logs any error/wait status as debug output.
static int stlink_usb_read_trace(void *handle, const uint8_t *buf, int size)
{
struct stlink_usb_handle_s *h = handle;
- int tr, ret;
assert(handle != NULL);
assert(h->version.flags & STLINK_F_HAS_TRACE);
- ret = jtag_libusb_bulk_read(h->fd, h->trace_ep, (char *)buf, size,
- STLINK_READ_TIMEOUT, &tr);
- if (ret || tr != size) {
- LOG_ERROR("bulk trace read failed");
- return ERROR_FAIL;
- }
-
- return ERROR_OK;
+ return h->backend->read_trace(handle, buf, size);
}
/*
return res;
size_t bytes_avail = le_to_h_u16(h->databuf);
- *size = bytes_avail < *size ? bytes_avail : *size - 1;
+ *size = bytes_avail < *size ? bytes_avail : *size;
if (*size > 0) {
res = stlink_usb_read_trace(handle, buf, *size);
}
/** */
-static int stlink_usb_read_reg(void *handle, int num, uint32_t *val)
+static int stlink_usb_read_reg(void *handle, unsigned int regsel, uint32_t *val)
{
int res;
struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
+ if (STLINK_REGSEL_IS_FPU(regsel) && !(h->version.flags & STLINK_F_HAS_FPU_REG)) {
+ res = stlink_usb_write_debug_reg(h, DCB_DCRSR, regsel & 0x7f);
+ if (res != ERROR_OK)
+ return res;
+
+ /* FIXME: poll DHCSR.S_REGRDY before read DCRDR */
+ return stlink_usb_v2_read_debug_reg(h, DCB_DCRDR, val);
+ }
+
stlink_usb_init_buffer(handle, h->rx_ep, h->version.jtag_api == STLINK_JTAG_API_V1 ? 4 : 8);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_READREG;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_READREG;
- h->cmdbuf[h->cmdidx++] = num;
+ h->cmdbuf[h->cmdidx++] = regsel;
if (h->version.jtag_api == STLINK_JTAG_API_V1) {
res = stlink_usb_xfer_noerrcheck(handle, h->databuf, 4);
}
/** */
-static int stlink_usb_write_reg(void *handle, int num, uint32_t val)
+static int stlink_usb_write_reg(void *handle, unsigned int regsel, uint32_t val)
{
struct stlink_usb_handle_s *h = handle;
assert(handle != NULL);
+ if (STLINK_REGSEL_IS_FPU(regsel) && !(h->version.flags & STLINK_F_HAS_FPU_REG)) {
+ int res = stlink_usb_write_debug_reg(h, DCB_DCRDR, val);
+ if (res != ERROR_OK)
+ return res;
+
+ return stlink_usb_write_debug_reg(h, DCB_DCRSR, DCRSR_WnR | (regsel & 0x7f));
+ /* FIXME: poll DHCSR.S_REGRDY after write DCRSR */
+ }
+
stlink_usb_init_buffer(handle, h->rx_ep, 2);
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_COMMAND;
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV1_WRITEREG;
else
h->cmdbuf[h->cmdidx++] = STLINK_DEBUG_APIV2_WRITEREG;
- h->cmdbuf[h->cmdidx++] = num;
+ h->cmdbuf[h->cmdidx++] = regsel;
h_u32_to_le(h->cmdbuf+h->cmdidx, val);
h->cmdidx += 4;
}
/** */
-static int stlink_usb_close(void *handle)
+static int stlink_usb_usb_close(void *handle)
{
struct stlink_usb_handle_s *h = handle;
- if (h && h->fd) {
+ if (!h)
+ return ERROR_OK;
+
+ if (h->usb_backend_priv.fd) {
stlink_usb_exit_mode(h);
/* do not check return code, it prevent
us from closing jtag_libusb */
- jtag_libusb_close(h->fd);
+ jtag_libusb_close(h->usb_backend_priv.fd);
}
- free(h);
+ free(h->cmdbuf);
+ free(h->databuf);
+
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_tcp_close(void *handle)
+{
+ struct stlink_usb_handle_s *h = handle;
+
+ if (!h)
+ return ERROR_OK;
+
+ int ret = ERROR_OK;
+ if (h->tcp_backend_priv.connected) {
+ if (h->tcp_backend_priv.connect_id) {
+ stlink_usb_exit_mode(h);
+
+ /* close the stlink */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_CLOSE_DEV;
+ memset(&h->tcp_backend_priv.send_buf[1], 0, 4); /* reserved */
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[4], h->tcp_backend_priv.connect_id);
+ ret = stlink_tcp_send_cmd(h, 8, 4, true);
+ if (ret != ERROR_OK)
+ LOG_ERROR("cannot close the STLINK");
+ }
+
+ if (close_socket(h->tcp_backend_priv.fd) != 0)
+ LOG_ERROR("error closing the socket, errno: %s", strerror(errno));
+ }
+
+ free(h->tcp_backend_priv.send_buf);
+ free(h->tcp_backend_priv.recv_buf);
+
+ return ret;
+}
+
+/** */
+static int stlink_close(void *handle)
+{
+ if (handle != NULL) {
+ struct stlink_usb_handle_s *h = handle;
+
+ stlink_usb_close(handle);
+
+ free(h);
+ }
return ERROR_OK;
}
* based on the length (0x1a = 26) we could easily decide if we have to fixup the serial
* and then we have just to convert the raw data into printable characters using sprintf
*/
-static char *stlink_usb_get_alternate_serial(libusb_device_handle *device,
+static char *stlink_usb_get_alternate_serial(struct libusb_device_handle *device,
struct libusb_device_descriptor *dev_desc)
{
int usb_retval;
}
/** */
-static int stlink_usb_open(struct hl_interface_param_s *param, enum stlink_mode mode, void **fd)
+static int stlink_usb_usb_open(void *handle, struct hl_interface_param_s *param)
{
+ struct stlink_usb_handle_s *h = handle;
int err, retry_count = 1;
- struct stlink_usb_handle_s *h;
- LOG_DEBUG("stlink_usb_open");
+ h->cmdbuf = malloc(STLINK_SG_SIZE);
+ h->databuf = malloc(STLINK_DATA_SIZE);
- h = calloc(1, sizeof(struct stlink_usb_handle_s));
-
- if (h == 0) {
- LOG_DEBUG("malloc failed");
+ if (h->cmdbuf == NULL || h->databuf == NULL)
return ERROR_FAIL;
- }
-
- h->st_mode = mode;
-
- for (unsigned i = 0; param->vid[i]; i++) {
- LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x serial: %s",
- h->st_mode, param->vid[i], param->pid[i],
- param->serial ? param->serial : "");
- }
/*
On certain host USB configurations(e.g. MacBook Air)
*/
do {
if (jtag_libusb_open(param->vid, param->pid, param->serial,
- &h->fd, stlink_usb_get_alternate_serial) != ERROR_OK) {
+ &h->usb_backend_priv.fd, stlink_usb_get_alternate_serial) != ERROR_OK) {
LOG_ERROR("open failed");
- goto error_open;
+ return ERROR_FAIL;
}
- jtag_libusb_set_configuration(h->fd, 0);
+ jtag_libusb_set_configuration(h->usb_backend_priv.fd, 0);
- if (libusb_claim_interface(h->fd, 0) != ERROR_OK) {
+ if (libusb_claim_interface(h->usb_backend_priv.fd, 0) != ERROR_OK) {
LOG_DEBUG("claim interface failed");
- goto error_open;
+ return ERROR_FAIL;
}
/* RX EP is common for all versions */
h->rx_ep = STLINK_RX_EP;
uint16_t pid;
- if (jtag_libusb_get_pid(libusb_get_device(h->fd), &pid) != ERROR_OK) {
+ if (jtag_libusb_get_pid(libusb_get_device(h->usb_backend_priv.fd), &pid) != ERROR_OK) {
LOG_DEBUG("libusb_get_pid failed");
- goto error_open;
+ return ERROR_FAIL;
}
/* wrap version for first read */
} else if (h->version.stlink == 1 ||
retry_count == 0) {
LOG_ERROR("read version failed");
- goto error_open;
+ return ERROR_FAIL;
} else {
- err = libusb_release_interface(h->fd, 0);
+ err = libusb_release_interface(h->usb_backend_priv.fd, 0);
if (err != ERROR_OK) {
LOG_ERROR("release interface failed");
- goto error_open;
+ return ERROR_FAIL;
}
- err = libusb_reset_device(h->fd);
+ err = libusb_reset_device(h->usb_backend_priv.fd);
if (err != ERROR_OK) {
LOG_ERROR("reset device failed");
- goto error_open;
+ return ERROR_FAIL;
}
- jtag_libusb_close(h->fd);
+ jtag_libusb_close(h->usb_backend_priv.fd);
/*
Give the device one second to settle down and
reenumerate.
}
} while (1);
+ return ERROR_OK;
+}
+
+/** */
+static int stlink_tcp_open(void *handle, struct hl_interface_param_s *param)
+{
+ struct stlink_usb_handle_s *h = handle;
+ int ret;
+
+ /* SWIM is not supported using stlink-server */
+ if (h->st_mode == STLINK_MODE_DEBUG_SWIM) {
+ LOG_ERROR("stlink-server does not support SWIM mode");
+ return ERROR_FAIL;
+ }
+
+ h->tcp_backend_priv.send_buf = malloc(STLINK_TCP_SEND_BUFFER_SIZE);
+ h->tcp_backend_priv.recv_buf = malloc(STLINK_TCP_RECV_BUFFER_SIZE);
+
+ if (h->tcp_backend_priv.send_buf == NULL || h->tcp_backend_priv.recv_buf == NULL)
+ return ERROR_FAIL;
+
+ h->cmdbuf = &h->tcp_backend_priv.send_buf[8];
+ h->databuf = &h->tcp_backend_priv.recv_buf[4];
+
+ /* configure directions */
+ h->rx_ep = STLINK_TCP_REQUEST_READ;
+ h->tx_ep = STLINK_TCP_REQUEST_WRITE;
+ h->trace_ep = STLINK_TCP_REQUEST_READ_SWO;
+
+ h->tcp_backend_priv.fd = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP);
+ h->tcp_backend_priv.connected = false;
+ h->tcp_backend_priv.device_id = 0;
+ h->tcp_backend_priv.connect_id = 0;
+
+ if (h->tcp_backend_priv.fd == -1) {
+ LOG_ERROR("error creating the socket, errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ struct sockaddr_in serv;
+ memset(&serv, 0, sizeof(struct sockaddr_in));
+ serv.sin_family = AF_INET;
+ serv.sin_port = htons(param->stlink_tcp_port);
+ serv.sin_addr.s_addr = inet_addr("127.0.0.1");
+
+ LOG_DEBUG("socket : %x", h->tcp_backend_priv.fd);
+
+ int optval = 1;
+ if (setsockopt(h->tcp_backend_priv.fd, IPPROTO_TCP, TCP_NODELAY, (const void *)&optval, sizeof(int)) == -1) {
+ LOG_ERROR("cannot set sock option 'TCP_NODELAY', errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ optval = STLINK_TCP_RECV_BUFFER_SIZE;
+ if (setsockopt(h->tcp_backend_priv.fd, SOL_SOCKET, SO_RCVBUF, (const void *)&optval, sizeof(int)) == -1) {
+ LOG_ERROR("cannot set sock option 'SO_RCVBUF', errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ optval = STLINK_TCP_SEND_BUFFER_SIZE;
+ if (setsockopt(h->tcp_backend_priv.fd, SOL_SOCKET, SO_SNDBUF, (const void *)&optval, sizeof(int)) == -1) {
+ LOG_ERROR("cannot set sock option 'SO_SNDBUF', errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ if (connect(h->tcp_backend_priv.fd, (const struct sockaddr *)&serv, sizeof(serv)) == -1) {
+ LOG_ERROR("cannot connect to stlink server, errno: %s", strerror(errno));
+ return ERROR_FAIL;
+ }
+
+ h->tcp_backend_priv.connected = true;
+
+ LOG_INFO("connected to stlink-server");
+
+ /* print stlink-server version */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_GET_SERVER_VERSION;
+ h->tcp_backend_priv.send_buf[1] = OPENOCD_STLINK_TCP_API_VERSION;
+ memset(&h->tcp_backend_priv.send_buf[2], 0, 2); /* reserved */
+ ret = stlink_tcp_send_cmd(h, 4, 16, false);
+ if (ret != ERROR_OK) {
+ LOG_ERROR("cannot get the stlink-server version");
+ return ERROR_FAIL;
+ }
+
+ uint32_t api_ver = le_to_h_u32(&h->tcp_backend_priv.recv_buf[0]);
+ uint32_t ver_major = le_to_h_u32(&h->tcp_backend_priv.recv_buf[4]);
+ uint32_t ver_minor = le_to_h_u32(&h->tcp_backend_priv.recv_buf[8]);
+ uint32_t ver_build = le_to_h_u32(&h->tcp_backend_priv.recv_buf[12]);
+ LOG_INFO("stlink-server API v%d, version %d.%d.%d",
+ api_ver, ver_major, ver_minor, ver_build);
+
+ /* in stlink-server API v1 sending more than 1428 bytes will cause stlink-server
+ * to crash in windows: select a safe default value (1K) */
+ if (api_ver < 2)
+ h->max_mem_packet = (1 << 10);
+
+ /* refresh stlink list (re-enumerate) */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_REFRESH_DEVICE_LIST;
+ h->tcp_backend_priv.send_buf[1] = 0; /* don't clear the list, just refresh it */
+ ret = stlink_tcp_send_cmd(h, 2, 4, true);
+ if (ret != ERROR_OK)
+ return ret;
+
+ /* get the number of connected stlinks */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_GET_NB_DEV;
+ ret = stlink_tcp_send_cmd(h, 1, 4, false);
+ if (ret != ERROR_OK)
+ return ret;
+
+ uint32_t connected_stlinks = le_to_h_u32(h->tcp_backend_priv.recv_buf);
+
+ if (connected_stlinks == 0) {
+ LOG_ERROR("no ST-LINK detected");
+ return ERROR_FAIL;
+ }
+
+ LOG_DEBUG("%d ST-LINK detected", connected_stlinks);
+
+ if (connected_stlinks > 255) {
+ LOG_WARNING("STLink server cannot handle more than 255 ST-LINK connected");
+ connected_stlinks = 255;
+ }
+
+ /* list all connected ST-Link and seek for the requested vid:pid and serial */
+ char serial[STLINK_TCP_SERIAL_SIZE + 1] = {0};
+ uint8_t stlink_used;
+ bool stlink_id_matched = false;
+ bool stlink_serial_matched = (param->serial == NULL);
+
+ for (uint32_t stlink_id = 0; stlink_id < connected_stlinks; stlink_id++) {
+ /* get the stlink info */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_GET_DEV_INFO;
+ h->tcp_backend_priv.send_buf[1] = (uint8_t)stlink_id;
+ memset(&h->tcp_backend_priv.send_buf[2], 0, 2); /* reserved */
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[4], 41); /* size of TDeviceInfo2 */
+ ret = stlink_tcp_send_cmd(h, 8, 45, true);
+ if (ret != ERROR_OK)
+ return ret;
+
+ h->tcp_backend_priv.device_id = le_to_h_u32(&h->tcp_backend_priv.recv_buf[4]);
+ memcpy(serial, &h->tcp_backend_priv.recv_buf[8], STLINK_TCP_SERIAL_SIZE);
+ h->vid = le_to_h_u16(&h->tcp_backend_priv.recv_buf[40]);
+ h->pid = le_to_h_u16(&h->tcp_backend_priv.recv_buf[42]);
+ stlink_used = h->tcp_backend_priv.recv_buf[44];
+
+ /* check the vid:pid */
+ for (int i = 0; param->vid[i]; i++) {
+ if (param->vid[i] == h->vid && param->pid[i] == h->pid) {
+ stlink_id_matched = true;
+ break;
+ }
+ }
+
+ if (!stlink_id_matched)
+ continue;
+
+ /* check the serial if specified */
+ if (param->serial) {
+ /* ST-Link server fixes the buggy serial returned by old ST-Link DFU
+ * for further details refer to stlink_usb_get_alternate_serial
+ * so if the user passes the buggy serial, we need to fix it before
+ * comparing with the serial returned by ST-Link server */
+ if (strlen(param->serial) == STLINK_SERIAL_LEN / 2) {
+ char fixed_serial[STLINK_SERIAL_LEN + 1];
+
+ for (unsigned int i = 0; i < STLINK_SERIAL_LEN; i += 2)
+ sprintf(fixed_serial + i, "%02X", param->serial[i / 2]);
+
+ fixed_serial[STLINK_SERIAL_LEN] = '\0';
+
+ stlink_serial_matched = strcmp(fixed_serial, serial) == 0;
+ } else
+ stlink_serial_matched = strcmp(param->serial, serial) == 0;
+ }
+
+ if (!stlink_serial_matched)
+ LOG_DEBUG("Device serial number '%s' doesn't match requested serial '%s'",
+ serial, param->serial);
+ else /* exit the search loop if there is match */
+ break;
+ }
+
+ if (!stlink_id_matched) {
+ LOG_ERROR("ST-LINK open failed (vid/pid mismatch)");
+ return ERROR_FAIL;
+ }
+
+ if (!stlink_serial_matched) {
+ LOG_ERROR("ST-LINK open failed (serial mismatch)");
+ return ERROR_FAIL;
+ }
+
+ /* check if device is 'exclusively' used by another application */
+ if (stlink_used) {
+ LOG_ERROR("the selected device is already used");
+ return ERROR_FAIL;
+ }
+
+ LOG_DEBUG("transport: vid: 0x%04x pid: 0x%04x serial: %s", h->vid, h->pid, serial);
+
+ /* now let's open the stlink */
+ h->tcp_backend_priv.send_buf[0] = STLINK_TCP_CMD_OPEN_DEV;
+ memset(&h->tcp_backend_priv.send_buf[1], 0, 4); /* reserved */
+ h_u32_to_le(&h->tcp_backend_priv.send_buf[4], h->tcp_backend_priv.device_id);
+ ret = stlink_tcp_send_cmd(h, 8, 8, true);
+ if (ret != ERROR_OK)
+ return ret;
+
+ h->tcp_backend_priv.connect_id = le_to_h_u32(&h->tcp_backend_priv.recv_buf[4]);
+
+ /* get stlink version */
+ return stlink_usb_version(h);
+}
+
+static struct stlink_backend_s stlink_usb_backend = {
+ .open = stlink_usb_usb_open,
+ .close = stlink_usb_usb_close,
+ .xfer_noerrcheck = stlink_usb_usb_xfer_noerrcheck,
+ .read_trace = stlink_usb_usb_read_trace,
+};
+
+static struct stlink_backend_s stlink_tcp_backend = {
+ .open = stlink_tcp_open,
+ .close = stlink_tcp_close,
+ .xfer_noerrcheck = stlink_tcp_xfer_noerrcheck,
+ .read_trace = stlink_tcp_read_trace,
+};
+
+static int stlink_open(struct hl_interface_param_s *param, enum stlink_mode mode, void **fd)
+{
+ struct stlink_usb_handle_s *h;
+
+ LOG_DEBUG("stlink_open");
+
+ h = calloc(1, sizeof(struct stlink_usb_handle_s));
+
+ if (h == 0) {
+ LOG_DEBUG("malloc failed");
+ return ERROR_FAIL;
+ }
+
+ h->st_mode = mode;
+
+ for (unsigned i = 0; param->vid[i]; i++) {
+ LOG_DEBUG("transport: %d vid: 0x%04x pid: 0x%04x serial: %s",
+ h->st_mode, param->vid[i], param->pid[i],
+ param->serial ? param->serial : "");
+ }
+
+ if (param->use_stlink_tcp)
+ h->backend = &stlink_tcp_backend;
+ else
+ h->backend = &stlink_usb_backend;
+
+ if (stlink_usb_open(h, param) != ERROR_OK)
+ goto error_open;
+
/* check if mode is supported */
- err = ERROR_OK;
+ int err = ERROR_OK;
switch (h->st_mode) {
case STLINK_MODE_DEBUG_SWD:
return ERROR_OK;
}
- /* get cpuid, so we can determine the max page size
- * start with a safe default */
- h->max_mem_packet = (1 << 10);
+ /* set max_mem_packet if it was not set by the low-level interface */
+ if (h->max_mem_packet == 0) {
+ /* get cpuid, so we can determine the max page size
+ * start with a safe default */
+ h->max_mem_packet = (1 << 10);
- uint8_t buffer[4];
- stlink_usb_open_ap(h, 0);
- err = stlink_usb_read_mem32(h, CPUID, 4, buffer);
- if (err == ERROR_OK) {
- uint32_t cpuid = le_to_h_u32(buffer);
- int i = (cpuid >> 4) & 0xf;
- if (i == 4 || i == 3) {
- /* Cortex-M3/M4 has 4096 bytes autoincrement range */
- h->max_mem_packet = (1 << 12);
+ uint8_t buffer[4];
+ stlink_usb_open_ap(h, 0);
+ err = stlink_usb_read_mem32(h, CPUID, 4, buffer);
+ if (err == ERROR_OK) {
+ uint32_t cpuid = le_to_h_u32(buffer);
+ int i = (cpuid >> 4) & 0xf;
+ if (i == 4 || i == 3) {
+ /* Cortex-M3/M4 has 4096 bytes autoincrement range */
+ h->max_mem_packet = (1 << 12);
+ }
}
- }
- LOG_DEBUG("Using TAR autoincrement: %" PRIu32, h->max_mem_packet);
+ LOG_DEBUG("Using TAR autoincrement: %" PRIu32, h->max_mem_packet);
+ }
*fd = h;
return ERROR_OK;
error_open:
- stlink_usb_close(h);
-
+ stlink_close(h);
return ERROR_FAIL;
}
static int stlink_usb_hl_open(struct hl_interface_param_s *param, void **fd)
{
- return stlink_usb_open(param, stlink_get_mode(param->transport), fd);
+ return stlink_open(param, stlink_get_mode(param->transport), fd);
}
static int stlink_config_trace(void *handle, bool enabled,
uint16_t *prescaler)
{
struct stlink_usb_handle_s *h = handle;
- uint16_t presc;
- if (enabled && (!(h->version.flags & STLINK_F_HAS_TRACE) ||
- pin_protocol != TPIU_PIN_PROTOCOL_ASYNC_UART)) {
+ if (!(h->version.flags & STLINK_F_HAS_TRACE)) {
+ LOG_ERROR("The attached ST-LINK version doesn't support trace");
+ return ERROR_FAIL;
+ }
+
+ if (!enabled) {
+ stlink_usb_trace_disable(h);
+ return ERROR_OK;
+ }
+
+ assert(trace_freq != NULL);
+ assert(prescaler != NULL);
+
+ if (pin_protocol != TPIU_PIN_PROTOCOL_ASYNC_UART) {
LOG_ERROR("The attached ST-LINK version doesn't support this trace mode");
return ERROR_FAIL;
}
STLINK_V3_TRACE_MAX_HZ : STLINK_TRACE_MAX_HZ;
/* Only concern ourselves with the frequency if the STlink is processing it. */
- if (enabled && *trace_freq > max_trace_freq) {
+ if (*trace_freq > max_trace_freq) {
LOG_ERROR("ST-LINK doesn't support SWO frequency higher than %u",
max_trace_freq);
return ERROR_FAIL;
}
- stlink_usb_trace_disable(h);
-
if (!*trace_freq)
*trace_freq = max_trace_freq;
- presc = traceclkin_freq / *trace_freq;
-
- if (traceclkin_freq % *trace_freq > 0)
- presc++;
+ unsigned int presc = (traceclkin_freq + *trace_freq / 2) / *trace_freq;
+ if (presc == 0 || presc > TPIU_ACPR_MAX_SWOSCALER + 1) {
+ LOG_ERROR("SWO frequency is not suitable. Please choose a different "
+ "frequency.");
+ return ERROR_FAIL;
+ }
- if (presc > TPIU_ACPR_MAX_SWOSCALER) {
+ /* Probe's UART speed must be within 3% of the TPIU's SWO baud rate. */
+ unsigned int max_deviation = (traceclkin_freq * 3) / 100;
+ if (presc * *trace_freq < traceclkin_freq - max_deviation ||
+ presc * *trace_freq > traceclkin_freq + max_deviation) {
LOG_ERROR("SWO frequency is not suitable. Please choose a different "
"frequency.");
return ERROR_FAIL;
*prescaler = presc;
- if (!enabled)
- return ERROR_OK;
+ stlink_usb_trace_disable(h);
h->trace.source_hz = *trace_freq;
/** */
.open = stlink_usb_hl_open,
/** */
- .close = stlink_usb_close,
+ .close = stlink_close,
/** */
.idcode = stlink_usb_idcode,
/** */
return ERROR_OK;
}
+/** */
+COMMAND_HANDLER(stlink_dap_backend_command)
+{
+ /* default values */
+ bool use_stlink_tcp = false;
+ uint16_t stlink_tcp_port = 7184;
+
+ if (CMD_ARGC == 0 || CMD_ARGC > 2)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ else if (strcmp(CMD_ARGV[0], "usb") == 0) {
+ if (CMD_ARGC > 1)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ /* else use_stlink_tcp = false (already the case ) */
+ } else if (strcmp(CMD_ARGV[0], "tcp") == 0) {
+ use_stlink_tcp = true;
+ if (CMD_ARGC == 2)
+ COMMAND_PARSE_NUMBER(u16, CMD_ARGV[1], stlink_tcp_port);
+ } else
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ stlink_dap_param.use_stlink_tcp = use_stlink_tcp;
+ stlink_dap_param.stlink_tcp_port = stlink_tcp_port;
+
+ return ERROR_OK;
+}
+
/** */
static const struct command_registration stlink_dap_subcommand_handlers[] = {
{
.help = "USB VID and PID of the adapter",
.usage = "(vid pid)+",
},
+ {
+ .name = "backend",
+ .handler = &stlink_dap_backend_command,
+ .mode = COMMAND_CONFIG,
+ .help = "select which ST-Link backend to use",
+ .usage = "usb | tcp [port]",
+ },
COMMAND_REGISTRATION_DONE
};
return ERROR_FAIL;
}
- retval = stlink_usb_open(&stlink_dap_param, mode, (void **)&stlink_dap_handle);
+ retval = stlink_open(&stlink_dap_param, mode, (void **)&stlink_dap_handle);
if (retval != ERROR_OK)
return retval;
free((void *)stlink_dap_param.serial);
stlink_dap_param.serial = NULL;
- return stlink_usb_close(stlink_dap_handle);
+ return stlink_close(stlink_dap_handle);
}
/** */
Code Review / openocd.git / blobdiff