target/arm_adi_v5: fix typo
[openocd.git] / src / target / x86_32_common.h
index ef5a9ccae18b61a68a621ec397542264305603e1..14e6e35f77b6f2401e11be77b95543e0d22da7be 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2013 Intel Corporation.
+ * Copyright(c) 2013-2016 Intel Corporation.
  *
  * Adrian Burns (adrian.burns@intel.com)
  * Thomas Faust (thomas.faust@intel.com)
@@ -8,8 +8,9 @@
  * Jeffrey Maxwell (jeffrey.r.maxwell@intel.com)
  *
  * This program is free software; you can redistribute it and/or modify
- * it under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
@@ -17,8 +18,7 @@
  * General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  * Contact Information:
  * Intel Corporation
  * This is the interface to the x86 32 bit memory and breakpoint operations.
  */
 
-#ifndef X86_32_COMMON_H
-#define X86_32_COMMON_H
+#ifndef OPENOCD_TARGET_X86_32_COMMON_H
+#define OPENOCD_TARGET_X86_32_COMMON_H
 
 #include <jtag/jtag.h>
 #include <helper/command.h>
+#include <helper/types.h>
 
 extern const struct command_registration x86_32_command_handlers[];
 
@@ -42,27 +43,27 @@ extern const struct command_registration x86_32_command_handlers[];
 #define WORD                   2
 #define DWORD                  4
 
-#define EFLAGS_TF              0x00000100 /* Trap Flag */
-#define EFLAGS_IF              0x00000200 /* Interrupt Flag */
-#define EFLAGS_RF              0x00010000 /* Resume Flag */
-#define EFLAGS_VM86            0x00020000 /* Virtual 8086 Mode */
+#define EFLAGS_TF              ((uint32_t)0x00000100) /* Trap Flag */
+#define EFLAGS_IF              ((uint32_t)0x00000200) /* Interrupt Flag */
+#define EFLAGS_RF              ((uint32_t)0x00010000) /* Resume Flag */
+#define EFLAGS_VM86            ((uint32_t)0x00020000) /* Virtual 8086 Mode */
 
-#define CSAR_DPL               0x00006000
-#define CSAR_D                 0x00400000
-#define SSAR_DPL               0x00006000
+#define CSAR_DPL               ((uint32_t)0x00006000)
+#define CSAR_D                 ((uint32_t)0x00400000)
+#define SSAR_DPL               ((uint32_t)0x00006000)
 
-#define CR0_PE                 0x00000001 /* Protected Mode Enable */
-#define CR0_NW                 0x20000000 /* Non Write-Through */
-#define CR0_CD                 0x40000000 /* Cache Disable */
-#define CR0_PG                 0x80000000 /* Paging Enable */
+#define CR0_PE                 ((uint32_t)0x00000001) /* Protected Mode Enable */
+#define CR0_NW                 ((uint32_t)0x20000000) /* Non Write-Through */
+#define CR0_CD                 ((uint32_t)0x40000000) /* Cache Disable */
+#define CR0_PG                 ((uint32_t)0x80000000) /* Paging Enable */
 
 /* TODO - move back to PM specific file */
-#define PM_DR6                 0xFFFF0FF0
+#define PM_DR6                 ((uint32_t)0xFFFF0FF0)
 
-#define DR6_BRKDETECT_0                0x00000001 /* B0 through B3 */
-#define DR6_BRKDETECT_1                0x00000002 /* breakpoint condition detected */
-#define DR6_BRKDETECT_2                0x00000004
-#define DR6_BRKDETECT_3                0x00000008
+#define DR6_BRKDETECT_0                ((uint32_t)0x00000001) /* B0 through B3 */
+#define DR6_BRKDETECT_1                ((uint32_t)0x00000002) /* breakpoint condition detected */
+#define DR6_BRKDETECT_2                ((uint32_t)0x00000004)
+#define DR6_BRKDETECT_3                ((uint32_t)0x00000008)
 
 enum {
        /* general purpose registers */
@@ -194,6 +195,11 @@ enum {
        WBINVD,
 };
 
+enum x86_core_type {
+       LMT1,
+       LMT3_5
+};
+
 struct swbp_mem_patch {
        uint8_t orig_byte;
        uint32_t swbp_unique_id;
@@ -207,9 +213,11 @@ struct swbp_mem_patch {
 struct x86_32_common {
        uint32_t common_magic;
        void *arch_info;
+       enum x86_core_type core_type;
        struct reg_cache *cache;
        struct jtag_tap *curr_tap;
        uint32_t stored_pc;
+       int forced_halt_for_reset;
        int flush;
 
        /* pm_regs are for probemode save/restore state */
@@ -302,14 +310,14 @@ int x86_32_get_gdb_reg_list(struct target *t,
 int x86_32_common_init_arch_info(struct target *target,
                        struct x86_32_common *x86_32);
 int x86_32_common_mmu(struct target *t, int *enabled);
-int x86_32_common_virt2phys(struct target *t, uint32_t address, uint32_t *physical);
-int x86_32_common_read_phys_mem(struct target *t, uint32_t phys_address,
+int x86_32_common_virt2phys(struct target *t, target_addr_t address, target_addr_t *physical);
+int x86_32_common_read_phys_mem(struct target *t, target_addr_t phys_address,
                        uint32_t size, uint32_t count, uint8_t *buffer);
-int x86_32_common_write_phys_mem(struct target *t, uint32_t phys_address,
+int x86_32_common_write_phys_mem(struct target *t, target_addr_t phys_address,
                        uint32_t size, uint32_t count, const uint8_t *buffer);
-int x86_32_common_read_memory(struct target *t, uint32_t addr,
+int x86_32_common_read_memory(struct target *t, target_addr_t addr,
                        uint32_t size, uint32_t count, uint8_t *buf);
-int x86_32_common_write_memory(struct target *t, uint32_t addr,
+int x86_32_common_write_memory(struct target *t, target_addr_t addr,
                        uint32_t size, uint32_t count, const uint8_t *buf);
 int x86_32_common_read_io(struct target *t, uint32_t addr,
                        uint32_t size, uint8_t *buf);
@@ -319,5 +327,6 @@ int x86_32_common_add_breakpoint(struct target *t, struct breakpoint *bp);
 int x86_32_common_remove_breakpoint(struct target *t, struct breakpoint *bp);
 int x86_32_common_add_watchpoint(struct target *t, struct watchpoint *wp);
 int x86_32_common_remove_watchpoint(struct target *t, struct watchpoint *wp);
+void x86_32_common_reset_breakpoints_watchpoints(struct target *t);
 
-#endif /* X86_32_COMMON_H */
+#endif /* OPENOCD_TARGET_X86_32_COMMON_H */

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)