jtag/vdebug: adding xtensa config 23/7723/2
authorJacek Wuwer <jacekmw8@gmail.com>
Mon, 29 May 2023 17:00:27 +0000 (19:00 +0200)
committerAntonio Borneo <borneo.antonio@gmail.com>
Fri, 2 Jun 2023 21:04:37 +0000 (21:04 +0000)
This change adds the extensa sample target and board configurations.
it removes the obsoleted vd_xtensa_jtag.cfg from targets.

Change-Id: I9d4d25abde46c0b15e5211a973012447872cb405
Signed-off-by: Jacek Wuwer <jacekmw8@gmail.com>
Reviewed-on: https://review.openocd.org/c/openocd/+/7723
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Tested-by: jenkins
tcl/board/vd_xt8_jtag.cfg [new file with mode: 0644]
tcl/target/vd_xtensa_jtag.cfg [deleted file]
tcl/target/xtensa-core-xt8.cfg [new file with mode: 0644]

diff --git a/tcl/board/vd_xt8_jtag.cfg b/tcl/board/vd_xt8_jtag.cfg
new file mode 100644 (file)
index 0000000..867b9e7
--- /dev/null
@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Cadence virtual debug interface
+# Xtensa xt8 through JTAG
+
+source [find interface/vdebug.cfg]
+
+set CHIPNAME xt8
+set CPUTAPID 0x120034e5
+
+# vdebug select transport
+transport select jtag
+
+# JTAG reset config, frequency and reset delay
+reset_config trst_and_srst
+adapter speed 50000
+adapter srst delay 5
+
+# BFM hierarchical path and input clk period
+vdebug bfm_path Testbench.u_vd_jtag_bfm 10ns
+
+# DMA Memories to access backdoor, the values come from generated xtensa-core-xt8.cfg
+#vdebug mem_path Testbench.Xtsubsystem.Core0.iram0.iram0.mem.dataArray 0x40000000 0x100000
+#vdebug mem_path Testbench.Xtsubsystem.Core0.dram0.dram0.mem.dataArray 0x3ff00000 0x40000
+
+# Create Xtensa target first
+source [find target/xtensa.cfg]
+# Generate [xtensa-core-XXX.cfg] via "xt-gdb --dump-oocd-config"
+source  [find target/xtensa-core-xt8.cfg]
diff --git a/tcl/target/vd_xtensa_jtag.cfg b/tcl/target/vd_xtensa_jtag.cfg
deleted file mode 100644 (file)
index 88f5bcc..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-or-later
-# Cadence virtual debug interface
-# for Palladium emulation systems
-#
-
-# TODO: Enable backdoor memory access
-# set _MEMSTART 0x00000000
-# set _MEMSIZE 0x100000
-
-# BFM hierarchical path and input clk period
-vdebug bfm_path dut_top.JTAG 10ns
-# DMA Memories to access backdoor (up to 4)
-# vdebug mem_path tbench.u_mcu.u_sys.u_itcm_ram.Mem $_MEMSTART $_MEMSIZE
-
-# Create Xtensa target first
-source [find target/xtensa.cfg]
-
-# Configure Xtensa core parameters next
-# Generate [xtensa-core-XXX.cfg] via "xt-gdb --dump-oocd-config"
-
-# register target
-proc vdebug_examine_end {} {
-#    vdebug register_target
-}
-
-# Default hooks
-$_TARGETNAME configure -event examine-end { vdebug_examine_end }
diff --git a/tcl/target/xtensa-core-xt8.cfg b/tcl/target/xtensa-core-xt8.cfg
new file mode 100644 (file)
index 0000000..e544d78
--- /dev/null
@@ -0,0 +1,166 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# OpenOCD configuration file for Xtensa xt8 target
+
+#  Core definition and ABI
+xtensa xtdef   LX
+xtensa xtopt   arnum                   32
+xtensa xtopt   windowed                1
+
+
+#  Exception/Interrupt Options
+xtensa xtopt   exceptions              1
+xtensa xtopt   hipriints               1
+xtensa xtopt   intlevels               3
+xtensa xtopt   excmlevel               1
+
+
+#  Cache Options
+xtensa xtmem   icache                  16      1024    1
+xtensa xtmem   dcache                  16      1024    1       1
+
+
+#  Memory Options
+xtensa xtmem   iram                    0x40000000      1048576
+xtensa xtmem   dram                    0x3ff00000      262144
+xtensa xtmem   srom                    0x50000000      131072
+xtensa xtmem   sram                    0x60000000      4194304
+
+
+#  Memory Protection/Translation Options
+
+
+#  Debug Options
+xtensa xtopt   debuglevel              3
+xtensa xtopt   ibreaknum               2
+xtensa xtopt   dbreaknum               2
+
+
+#  Core Registers
+xtensa xtregs  127
+xtensa xtreg   a0                      0x0000
+xtensa xtreg   a1                      0x0001
+xtensa xtreg   a2                      0x0002
+xtensa xtreg   a3                      0x0003
+xtensa xtreg   a4                      0x0004
+xtensa xtreg   a5                      0x0005
+xtensa xtreg   a6                      0x0006
+xtensa xtreg   a7                      0x0007
+xtensa xtreg   a8                      0x0008
+xtensa xtreg   a9                      0x0009
+xtensa xtreg   a10                     0x000a
+xtensa xtreg   a11                     0x000b
+xtensa xtreg   a12                     0x000c
+xtensa xtreg   a13                     0x000d
+xtensa xtreg   a14                     0x000e
+xtensa xtreg   a15                     0x000f
+xtensa xtreg   pc                      0x0020
+xtensa xtreg   ar0                     0x0100
+xtensa xtreg   ar1                     0x0101
+xtensa xtreg   ar2                     0x0102
+xtensa xtreg   ar3                     0x0103
+xtensa xtreg   ar4                     0x0104
+xtensa xtreg   ar5                     0x0105
+xtensa xtreg   ar6                     0x0106
+xtensa xtreg   ar7                     0x0107
+xtensa xtreg   ar8                     0x0108
+xtensa xtreg   ar9                     0x0109
+xtensa xtreg   ar10                    0x010a
+xtensa xtreg   ar11                    0x010b
+xtensa xtreg   ar12                    0x010c
+xtensa xtreg   ar13                    0x010d
+xtensa xtreg   ar14                    0x010e
+xtensa xtreg   ar15                    0x010f
+xtensa xtreg   ar16                    0x0110
+xtensa xtreg   ar17                    0x0111
+xtensa xtreg   ar18                    0x0112
+xtensa xtreg   ar19                    0x0113
+xtensa xtreg   ar20                    0x0114
+xtensa xtreg   ar21                    0x0115
+xtensa xtreg   ar22                    0x0116
+xtensa xtreg   ar23                    0x0117
+xtensa xtreg   ar24                    0x0118
+xtensa xtreg   ar25                    0x0119
+xtensa xtreg   ar26                    0x011a
+xtensa xtreg   ar27                    0x011b
+xtensa xtreg   ar28                    0x011c
+xtensa xtreg   ar29                    0x011d
+xtensa xtreg   ar30                    0x011e
+xtensa xtreg   ar31                    0x011f
+xtensa xtreg   lbeg                    0x0200
+xtensa xtreg   lend                    0x0201
+xtensa xtreg   lcount                  0x0202
+xtensa xtreg   sar                     0x0203
+xtensa xtreg   windowbase              0x0248
+xtensa xtreg   windowstart             0x0249
+xtensa xtreg   configid0               0x02b0
+xtensa xtreg   configid1               0x02d0
+xtensa xtreg   ps                      0x02e6
+xtensa xtreg   expstate                0x03e6
+xtensa xtreg   mmid                    0x0259
+xtensa xtreg   ibreakenable            0x0260
+xtensa xtreg   ddr                     0x0268
+xtensa xtreg   ibreaka0                0x0280
+xtensa xtreg   ibreaka1                0x0281
+xtensa xtreg   dbreaka0                0x0290
+xtensa xtreg   dbreaka1                0x0291
+xtensa xtreg   dbreakc0                0x02a0
+xtensa xtreg   dbreakc1                0x02a1
+xtensa xtreg   epc1                    0x02b1
+xtensa xtreg   epc2                    0x02b2
+xtensa xtreg   epc3                    0x02b3
+xtensa xtreg   depc                    0x02c0
+xtensa xtreg   eps2                    0x02c2
+xtensa xtreg   eps3                    0x02c3
+xtensa xtreg   excsave1                0x02d1
+xtensa xtreg   excsave2                0x02d2
+xtensa xtreg   excsave3                0x02d3
+xtensa xtreg   interrupt               0x02e2
+xtensa xtreg   intset                  0x02e2
+xtensa xtreg   intclear                0x02e3
+xtensa xtreg   intenable               0x02e4
+xtensa xtreg   exccause                0x02e8
+xtensa xtreg   debugcause              0x02e9
+xtensa xtreg   ccount                  0x02ea
+xtensa xtreg   icount                  0x02ec
+xtensa xtreg   icountlevel             0x02ed
+xtensa xtreg   excvaddr                0x02ee
+xtensa xtreg   ccompare0               0x02f0
+xtensa xtreg   ccompare1               0x02f1
+xtensa xtreg   pwrctl                  0x200f
+xtensa xtreg   pwrstat                 0x2010
+xtensa xtreg   eristat                 0x2011
+xtensa xtreg   cs_itctrl               0x2012
+xtensa xtreg   cs_claimset             0x2013
+xtensa xtreg   cs_claimclr             0x2014
+xtensa xtreg   cs_lockaccess           0x2015
+xtensa xtreg   cs_lockstatus           0x2016
+xtensa xtreg   cs_authstatus           0x2017
+xtensa xtreg   fault_info              0x2026
+xtensa xtreg   trax_id                 0x2027
+xtensa xtreg   trax_control            0x2028
+xtensa xtreg   trax_status             0x2029
+xtensa xtreg   trax_data               0x202a
+xtensa xtreg   trax_address            0x202b
+xtensa xtreg   trax_pctrigger          0x202c
+xtensa xtreg   trax_pcmatch            0x202d
+xtensa xtreg   trax_delay              0x202e
+xtensa xtreg   trax_memstart           0x202f
+xtensa xtreg   trax_memend             0x2030
+xtensa xtreg   pmg                     0x203e
+xtensa xtreg   pmpc                    0x203f
+xtensa xtreg   pm0                     0x2040
+xtensa xtreg   pm1                     0x2041
+xtensa xtreg   pmctrl0                 0x2042
+xtensa xtreg   pmctrl1                 0x2043
+xtensa xtreg   pmstat0                 0x2044
+xtensa xtreg   pmstat1                 0x2045
+xtensa xtreg   ocdid                   0x2046
+xtensa xtreg   ocd_dcrclr              0x2047
+xtensa xtreg   ocd_dcrset              0x2048
+xtensa xtreg   ocd_dsr                 0x2049
+xtensa xtreg   psintlevel              0x2003
+xtensa xtreg   psum                    0x2004
+xtensa xtreg   pswoe                   0x2005
+xtensa xtreg   psexcm                  0x2006
+xtensa xtreg   pscallinc               0x2007
+xtensa xtreg   psowb                   0x2008

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)