The usage string should contain only the command parameters.
OpenOCD will automatically prepend the command name to the usage
string while dumping the usage or help message.
Remove the repeated command name from the usage string.
Change-Id: Idbc301b34fab19e221131d232577c1629568e6ea
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/5823
Tested-by: jenkins
.handler = &aice_handle_aice_info_command,
.mode = COMMAND_EXEC,
.help = "show aice info",
.handler = &aice_handle_aice_info_command,
.mode = COMMAND_EXEC,
.help = "show aice info",
},
{
.name = "port",
.handler = &aice_handle_aice_port_command,
.mode = COMMAND_CONFIG,
.help = "set the port of the AICE",
},
{
.name = "port",
.handler = &aice_handle_aice_port_command,
.mode = COMMAND_CONFIG,
.help = "set the port of the AICE",
- .usage = "aice port ['aice_pipe'|'aice_usb']",
+ .usage = "['aice_pipe'|'aice_usb']",
},
{
.name = "desc",
.handler = &aice_handle_aice_desc_command,
.mode = COMMAND_CONFIG,
.help = "set the aice device description",
},
{
.name = "desc",
.handler = &aice_handle_aice_desc_command,
.mode = COMMAND_CONFIG,
.help = "set the aice device description",
- .usage = "aice desc [desciption string]",
+ .usage = "[desciption string]",
},
{
.name = "serial",
.handler = &aice_handle_aice_serial_command,
.mode = COMMAND_CONFIG,
.help = "set the serial number of the AICE device",
},
{
.name = "serial",
.handler = &aice_handle_aice_serial_command,
.mode = COMMAND_CONFIG,
.help = "set the serial number of the AICE device",
- .usage = "aice serial [serial string]",
+ .usage = "[serial string]",
},
{
.name = "vid_pid",
.handler = &aice_handle_aice_vid_pid_command,
.mode = COMMAND_CONFIG,
.help = "the vendor and product ID of the AICE device",
},
{
.name = "vid_pid",
.handler = &aice_handle_aice_vid_pid_command,
.mode = COMMAND_CONFIG,
.help = "the vendor and product ID of the AICE device",
- .usage = "aice vid_pid (vid pid)*",
},
{
.name = "adapter",
.handler = &aice_handle_aice_adapter_command,
.mode = COMMAND_CONFIG,
.help = "set the file name of adapter",
},
{
.name = "adapter",
.handler = &aice_handle_aice_adapter_command,
.mode = COMMAND_CONFIG,
.help = "set the file name of adapter",
- .usage = "aice adapter [adapter name]",
+ .usage = "[adapter name]",
},
{
.name = "retry_times",
.handler = &aice_handle_aice_retry_times_command,
.mode = COMMAND_CONFIG,
.help = "set retry times as AICE timeout",
},
{
.name = "retry_times",
.handler = &aice_handle_aice_retry_times_command,
.mode = COMMAND_CONFIG,
.help = "set retry times as AICE timeout",
- .usage = "aice retry_times num_of_retry",
+ .usage = "num_of_retry",
},
{
.name = "count_to_check_dbger",
.handler = &aice_handle_aice_count_to_check_dbger_command,
.mode = COMMAND_CONFIG,
.help = "set retry times as checking $DBGER status",
},
{
.name = "count_to_check_dbger",
.handler = &aice_handle_aice_count_to_check_dbger_command,
.mode = COMMAND_CONFIG,
.help = "set retry times as checking $DBGER status",
- .usage = "aice count_to_check_dbger count_of_checking",
+ .usage = "count_of_checking",
},
{
.name = "custom_srst_script",
.handler = &aice_handle_aice_custom_srst_script_command,
.mode = COMMAND_CONFIG,
},
{
.name = "custom_srst_script",
.handler = &aice_handle_aice_custom_srst_script_command,
.mode = COMMAND_CONFIG,
- .usage = "custom_srst_script script_file_name",
+ .usage = "script_file_name",
.help = "set custom srst script",
},
{
.name = "custom_trst_script",
.handler = &aice_handle_aice_custom_trst_script_command,
.mode = COMMAND_CONFIG,
.help = "set custom srst script",
},
{
.name = "custom_trst_script",
.handler = &aice_handle_aice_custom_trst_script_command,
.mode = COMMAND_CONFIG,
- .usage = "custom_trst_script script_file_name",
+ .usage = "script_file_name",
.help = "set custom trst script",
},
{
.name = "custom_restart_script",
.handler = &aice_handle_aice_custom_restart_script_command,
.mode = COMMAND_CONFIG,
.help = "set custom trst script",
},
{
.name = "custom_restart_script",
.handler = &aice_handle_aice_custom_restart_script_command,
.mode = COMMAND_CONFIG,
- .usage = "custom_restart_script script_file_name",
+ .usage = "script_file_name",
.help = "set custom restart script",
},
{
.name = "reset",
.handler = &aice_handle_aice_reset_command,
.mode = COMMAND_EXEC,
.help = "set custom restart script",
},
{
.name = "reset",
.handler = &aice_handle_aice_reset_command,
.mode = COMMAND_EXEC,
.help = "reset AICE",
},
COMMAND_REGISTRATION_DONE
.help = "reset AICE",
},
COMMAND_REGISTRATION_DONE
.name = "aice",
.mode = COMMAND_ANY,
.help = "perform aice management",
.name = "aice",
.mode = COMMAND_ANY,
.help = "perform aice management",
- .usage = "aice [subcommand]",
+ .usage = "[subcommand]",
.chain = aice_subcommand_handlers,
},
COMMAND_REGISTRATION_DONE
.chain = aice_subcommand_handlers,
},
COMMAND_REGISTRATION_DONE
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)