-@deffn {Flash Driver} fm3
-All members of the FM3 microcontroller family from Fujitsu
-include internal flash and use ARM Cortex M3 cores.
-The @var{fm3} driver uses the @var{target} parameter to select the
-correct bank config, it can currently be one of the following:
-@code{mb9bfxx1.cpu}, @code{mb9bfxx2.cpu}, @code{mb9bfxx3.cpu},
-@code{mb9bfxx4.cpu}, @code{mb9bfxx5.cpu} or @code{mb9bfxx6.cpu}.
-
-@example
-flash bank $_FLASHNAME fm3 0 0 0 0 $_TARGETNAME
-@end example
-@end deffn
-
-@deffn {Flash Driver} sim3x
-All members of the SiM3 microcontroller family from Silicon Laboratories
-include internal flash and use ARM Cortex M3 cores. It supports both JTAG
-and SWD interface.
-The @var{sim3x} driver tries to probe the device to auto detect the MCU.
-If this failes, it will use the @var{size} parameter as the size of flash bank.
-
-@example
-flash bank $_FLASHNAME sim3x 0 $_CPUROMSIZE 0 0 $_TARGETNAME
-@end example
-
-There are 2 commands defined in the @var{sim3x} driver:
-
-@deffn Command {sim3x mass_erase}
-Erases the complete flash. This is used to unlock the flash.
-And this command is only possible when using the SWD interface.
-@end deffn
-
-@deffn Command {sim3x lock}
-Lock the flash. To unlock use the @command{sim3x mass_erase} command.
-@end deffn
-@end deffn
-
-@deffn {Flash Driver} nrf51
-All members of the nRF51 microcontroller families from Nordic Semiconductor
-include internal flash and use ARM Cortex-M0 core.
-
-@example
-flash bank $_FLASHNAME nrf51 0 0x00000000 0 0 $_TARGETNAME
-@end example
-
-Some nrf51-specific commands are defined:
-
-@deffn Command {nrf51 mass_erase}
-Erases the contents of the code memory and user information
-configuration registers as well. It must be noted that this command
-works only for chips that do not have factory pre-programmed region 0
-code.
-@end deffn
-
-@end deffn
-
-@deffn {Flash Driver} mdr
-This drivers handles the integrated NOR flash on Milandr Cortex-M
-based controllers. A known limitation is that the Info memory can't be
-read or verified as it's not memory mapped.
-
-@example
-flash bank <name> mdr <base> <size> \
- 0 0 <target#> @var{type} @var{page_count} @var{sec_count}
-@end example
-
-@itemize @bullet
-@item @var{type} - 0 for main memory, 1 for info memory
-@item @var{page_count} - total number of pages
-@item @var{sec_count} - number of sector per page count
-@end itemize
-
-Example usage:
-@example
-if @{ [info exists IMEMORY] && [string equal $IMEMORY true] @} @{
- flash bank $@{_CHIPNAME@}_info.flash mdr 0x00000000 0x01000 \
- 0 0 $_TARGETNAME 1 1 4
-@} else @{
- flash bank $_CHIPNAME.flash mdr 0x00000000 0x20000 \
- 0 0 $_TARGETNAME 0 32 4
-@}
-@end example
-@end deffn
-