scripts: use adapter_nsrst_delay not deprecated jtag_nsrst_delay

Change-Id: Idf98526d64dcba4d8a5b6910bd3c539756753e8e
Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk>
Reviewed-on: http://openocd.zylin.com/539
Tested-by: jenkins

diff --git a/tcl/board/hilscher_nxdb500sys.cfg b/tcl/board/hilscher_nxdb500sys.cfg
index 48aff354540ffbce24ffdf692dc6d0d4c7d841bc..77073e729ed43b728bac5ab5174872bbed292952 100644 (file)
--- a/tcl/board/hilscher_nxdb500sys.cfg
+++ b/tcl/board/hilscher_nxdb500sys.cfg
@@ -5,7 +5,7 @@
 source [find target/hilscher_netx500.cfg]
 
 reset_config trst_and_srst
-jtag_nsrst_delay 500
+adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 $_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1

diff --git a/tcl/board/hilscher_nxeb500hmi.cfg b/tcl/board/hilscher_nxeb500hmi.cfg
index 9accd98db66da2b73eb5d061941f6d70e87cfe77..64391561e68246e4de31da4eeab9f7a5f4380649 100644 (file)
--- a/tcl/board/hilscher_nxeb500hmi.cfg
+++ b/tcl/board/hilscher_nxeb500hmi.cfg
@@ -5,7 +5,7 @@
 source [find target/hilscher_netx500.cfg]
 
 reset_config trst_and_srst
-jtag_nsrst_delay 500
+adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 $_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1

diff --git a/tcl/board/hilscher_nxhx10.cfg b/tcl/board/hilscher_nxhx10.cfg
index 4a6b972ac5dd5d7c8b2696f19bd711e9a06721eb..4ef2f3b967a20afdb8bf52885ff883eb8eee9997 100644 (file)
--- a/tcl/board/hilscher_nxhx10.cfg
+++ b/tcl/board/hilscher_nxhx10.cfg
@@ -9,7 +9,7 @@ source [find target/hilscher_netx10.cfg]
 # problems try to line below
 # reset_config trst_and_srst srst_pulls_trst
 reset_config trst_and_srst
-jtag_nsrst_delay 500
+adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 $_TARGETNAME configure -work-area-virt 0x08000000 -work-area-phys 0x08000000 -work-area-size 0x4000 -work-area-backup 1

diff --git a/tcl/board/hilscher_nxhx50.cfg b/tcl/board/hilscher_nxhx50.cfg
index d129d12ea018fb9f456d4171631f9736982aaa3f..eebb165243dc7baa2aae7bd909c73b8d66128919 100644 (file)
--- a/tcl/board/hilscher_nxhx50.cfg
+++ b/tcl/board/hilscher_nxhx50.cfg
@@ -5,7 +5,7 @@
 source [find target/hilscher_netx50.cfg]
 
 reset_config trst_and_srst
-jtag_nsrst_delay 500
+adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 $_TARGETNAME configure -work-area-virt 0x10000000 -work-area-phys 0x10000000 -work-area-size 0x4000 -work-area-backup 1

diff --git a/tcl/board/hilscher_nxhx500.cfg b/tcl/board/hilscher_nxhx500.cfg
index 3f2ff56e68747bba000f6df33dad0f4fe170d788..dd3a9514db01f855419446f313a7290b190d4cfe 100644 (file)
--- a/tcl/board/hilscher_nxhx500.cfg
+++ b/tcl/board/hilscher_nxhx500.cfg
@@ -5,7 +5,7 @@
 source [find target/hilscher_netx500.cfg]
 
 reset_config trst_and_srst
-jtag_nsrst_delay 500
+adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 $_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1

diff --git a/tcl/board/hilscher_nxsb100.cfg b/tcl/board/hilscher_nxsb100.cfg
index f52af448a700315fbcef210588275a6c1732d55f..efb091b101df046b531fad966d6a6bb368a7331a 100644 (file)
--- a/tcl/board/hilscher_nxsb100.cfg
+++ b/tcl/board/hilscher_nxsb100.cfg
@@ -5,7 +5,7 @@
 source [find target/hilscher_netx500.cfg]
 
 reset_config trst_and_srst
-jtag_nsrst_delay 500
+adapter_nsrst_delay 500
 jtag_ntrst_delay 500
 
 $_TARGETNAME configure -work-area-virt 0x1000 -work-area-phys 0x1000 -work-area-size 0x4000 -work-area-backup 1

diff --git a/tcl/target/avr32.cfg b/tcl/target/avr32.cfg
index 932b750514e1a1c6f1d217b5993a9375a0eaee09..f5ee1a4866a21d1e2d22f5e692bb18ce67cfd678 100644 (file)
--- a/tcl/target/avr32.cfg
+++ b/tcl/target/avr32.cfg
@@ -3,7 +3,7 @@ set _ENDIAN big
 
 set _CPUTAPID 0x21e8203f
 
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
 reset_config trst_and_srst separate

diff --git a/tcl/target/fm3.cfg b/tcl/target/fm3.cfg
index 78df11b1ec9595d8139a328b6a5b25d308e1e0e6..60967e927f1ca380636a17e5536a629fb3669b01 100644 (file)
--- a/tcl/target/fm3.cfg
+++ b/tcl/target/fm3.cfg
@@ -20,7 +20,7 @@ if { [info exists CPUTAPID] } {
 }
 
 # delays on reset lines
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
 # Fujitsu cortex-M3 reset configuration

diff --git a/tcl/target/lpc3131.cfg b/tcl/target/lpc3131.cfg
index 702b40618c18bfe1a6dddac3f2d33cf2a71e3d0c..27c1f67578ff5dc56138f85214915935c34c8afb 100644 (file)
--- a/tcl/target/lpc3131.cfg
+++ b/tcl/target/lpc3131.cfg
@@ -52,7 +52,7 @@ dict set lpc313x wdt                  0x13002400
 # Target configuration
 ##################################################################
 
-jtag_nsrst_delay 1000
+adapter_nsrst_delay 1000
 jtag_ntrst_delay 0
 
 set _TARGETNAME $_CHIPNAME.cpu

diff --git a/tcl/target/stm32f2x.cfg b/tcl/target/stm32f2x.cfg
index a3076535fa913846bbf836bdf2c7769f42e00a84..cfd6274e68acc2128b39cf5bed5b699f41e57810 100644 (file)
--- a/tcl/target/stm32f2x.cfg
+++ b/tcl/target/stm32f2x.cfg
@@ -28,7 +28,7 @@ if { [info exists WORKAREASIZE] } {
 # that there can be a pretty wide band where things are more or less stable.
 adapter_khz 1000
 
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
 #jtag scan chain