Some command were already marked as deprecated in release v0.7.0,
more then 7 years ago, and for some of them the depredation date
is even earlier.
We can reasonably expect that in these 7 years any user of OpenOCD
has already migrated to v0.7.0 or to some following intermediate
build, thus has already updated any local/personal script to get
rid of the deprecated message.
Drop the commands already deprecated in v0.7.0.
Change-Id: I81cdc415ab855ebf30980ef5199f9780c5d7f932
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-on: http://openocd.zylin.com/6085
Tested-by: jenkins
Reviewed-by: Tarek BOCHKATI <tarek.bouchkati@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
proc stm32l5x args { eval stm32l4x $args }
proc stm32wbx args { eval stm32l4x $args }
proc stm32wlx args { eval stm32l4x $args }
proc stm32l5x args { eval stm32l4x $args }
proc stm32wbx args { eval stm32l4x $args }
proc stm32wlx args { eval stm32l4x $args }
-
-# ease migration to updated flash driver
-proc stm32x args {
- echo "DEPRECATED! use 'stm32f1x $args' not 'stm32x $args'"
- eval stm32f1x $args
-}
-
-proc stm32f2xxx args {
- echo "DEPRECATED! use 'stm32f2x $args' not 'stm32f2xxx $args'"
- eval stm32f2x $args
-}
# JTAG-specific names despite the fact that the operations were not
# specific to JTAG, or otherwise had troublesome/misleading names.
#
# JTAG-specific names despite the fact that the operations were not
# specific to JTAG, or otherwise had troublesome/misleading names.
#
-# FIXME phase these aids out after about April 2011
+# FIXME phase these aids out after some releases
-proc jtag_khz args {
- echo "DEPRECATED! use 'adapter speed' not 'jtag_khz'"
- eval adapter speed $args
-}
-
-proc jtag_nsrst_delay args {
- echo "DEPRECATED! use 'adapter srst delay' not 'jtag_nsrst_delay'"
- eval adapter srst delay $args
-}
-
-proc jtag_nsrst_assert_width args {
- echo "DEPRECATED! use 'adapter srst pulse_width' not 'jtag_nsrst_assert_width'"
- eval adapter srst pulse_width $args
-}
-
proc jtag_reset args {
echo "DEPRECATED! use 'adapter \[de\]assert' not 'jtag_reset'"
switch $args {
proc jtag_reset args {
echo "DEPRECATED! use 'adapter \[de\]assert' not 'jtag_reset'"
switch $args {
-# stlink migration helpers
-proc stlink_device_desc args {
- echo "DEPRECATED! use 'hla_device_desc' not 'stlink_device_desc'"
- eval hla_device_desc $args
-}
-
-proc stlink_serial args {
- echo "DEPRECATED! use 'hla_serial' not 'stlink_serial'"
- eval hla_serial $args
-}
-
-proc stlink_layout args {
- echo "DEPRECATED! use 'hla_layout' not 'stlink_layout'"
- eval hla_layout $args
-}
-
-proc stlink_vid_pid args {
- echo "DEPRECATED! use 'hla_vid_pid' not 'stlink_vid_pid'"
- eval hla_vid_pid $args
-}
-
-proc stlink args {
- echo "DEPRECATED! use 'hla' not 'stlink'"
- eval hla $args
-}
-
proc adapter_khz args {
echo "DEPRECATED! use 'adapter speed' not 'adapter_khz'"
eval adapter speed $args
proc adapter_khz args {
echo "DEPRECATED! use 'adapter speed' not 'adapter_khz'"
eval adapter speed $args
-# Temporary migration aid. May be removed starting in January 2011.
-proc armv4_5 params {
- echo "DEPRECATED! use 'arm $params' not 'armv4_5 $params'"
- arm $params
-}
-
# Target/chain configuration scripts can either execute commands directly
# or define a procedure which is executed once all configuration
# scripts have completed.
# Target/chain configuration scripts can either execute commands directly
# or define a procedure which is executed once all configuration
# scripts have completed.
# Additionally board config scripts can define a procedure init_board that will be executed after init and init_targets
proc init_board {} {
}
# Additionally board config scripts can define a procedure init_board that will be executed after init and init_targets
proc init_board {} {
}
-
-# deprecated target name cmds
-proc cortex_m3 args {
- echo "DEPRECATED! use 'cortex_m' not 'cortex_m3'"
- eval cortex_m $args
-}
-
-proc cortex_a8 args {
- echo "DEPRECATED! use 'cortex_a' not 'cortex_a8'"
- eval cortex_a $args
-}
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)