bits long, during Capture-IR 0x42 is loaded into the IR, and bits
[6,4,2,0] are checked.
bits long, during Capture-IR 0x42 is loaded into the IR, and bits
[6,4,2,0] are checked.
-FIXME: The IDCODE - this was not used in the old code, it should be?
-Right? -Duane.
@item @b{Optional configparams}
@comment START Optional
@itemize @bullet
@item @b{Optional configparams}
@comment START Optional
@itemize @bullet
@* @b{Removed: 28/nov/2008} This command has been removed and replaced
by the ``jtag newtap'' command. The documentation remains here so that
one can easily convert the old syntax to the new syntax. About the old
@* @b{Removed: 28/nov/2008} This command has been removed and replaced
by the ``jtag newtap'' command. The documentation remains here so that
one can easily convert the old syntax to the new syntax. About the old
-syntax: The old syntax is positional, ie: The 4th parameter is the
+syntax: The old syntax is positional, ie: The 3rd parameter is the
``irmask''. The new syntax requires named prefixes, and supports
``irmask''. The new syntax requires named prefixes, and supports
-additional options, for example ``-irmask 4''. Please refer to the
+additional options, for example ``-expected-id 0x3f0f0f0f''. Please refer to the
@b{jtag newtap} command for details.
@example
@b{jtag newtap} command for details.
@example
-OLD: jtag_device 8 0x01 0x0e3 0xfe
-NEW: jtag newtap CHIPNAME TAPNAME -irlen 8 -ircapture 0xe3 -irmask 0xfe
+OLD: jtag_device 8 0x01 0xe3 0xfe
+NEW: jtag newtap CHIPNAME TAPNAME -irlen 8 -ircapture 0x01 -irmask 0xe3
@end example
@section Enable/Disable Taps
@end example
@section Enable/Disable Taps
@item
A pipe connection is typically started as follows:
@example
@item
A pipe connection is typically started as follows:
@example
-target remote openocd --pipe
+target remote | openocd --pipe
@end example
This would cause GDB to run OpenOCD and communicate using pipes (stdin/stdout).
@end example
This would cause GDB to run OpenOCD and communicate using pipes (stdin/stdout).
-Using this method has the advantage of GDB starting/stopping OpenOCD for debug session.
+Using this method has the advantage of GDB starting/stopping OpenOCD for the debug
+session.
@end enumerate
@*To see a list of available OpenOCD commands type @option{monitor help} on the
@end enumerate
@*To see a list of available OpenOCD commands type @option{monitor help} on the
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)