Change-Id: I4eb645f74ef31fc0b5882299b3487020aa142dd8
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: http://openocd.zylin.com/6408
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
source [find target/altera_fpgasoc.cfg]
# If the USB Blaster II were supported, these settings would be needed
source [find target/altera_fpgasoc.cfg]
# If the USB Blaster II were supported, these settings would be needed
-#usb_blaster_vid_pid 0x09fb 0x6810
-#usb_blaster_device_desc "USB-Blaster II"
+#usb_blaster vid_pid 0x09fb 0x6810
+#usb_blaster device_desc "USB-Blaster II"
echo "Using external debugger"
} else {
source [find interface/altera-usb-blaster2.cfg]
echo "Using external debugger"
} else {
source [find interface/altera-usb-blaster2.cfg]
- usb_blaster_device_desc "Arria10 IDK"
+ usb_blaster device_desc "Arria10 IDK"
}
source [find fpga/altera-10m50.cfg]
}
source [find fpga/altera-10m50.cfg]
#
adapter driver usb_blaster
#
adapter driver usb_blaster
-usb_blaster_lowlevel_driver ftdi
+usb_blaster lowlevel_driver ftdi
# These are already the defaults.
# These are already the defaults.
-# usb_blaster_vid_pid 0x09FB 0x6001
-# usb_blaster_device_desc "USB-Blaster"
+# usb_blaster vid_pid 0x09FB 0x6001
+# usb_blaster device_desc "USB-Blaster"
#
adapter driver usb_blaster
#
adapter driver usb_blaster
-usb_blaster_vid_pid 0x09fb 0x6010 0x09fb 0x6810
-usb_blaster_lowlevel_driver ublast2
-usb_blaster_firmware /path/to/quartus/blaster_6810.hex
+usb_blaster vid_pid 0x09fb 0x6010 0x09fb 0x6810
+usb_blaster lowlevel_driver ublast2
+usb_blaster firmware /path/to/quartus/blaster_6810.hex
# driver but ixo-usb-jtag requires the ftdi driver.
adapter driver usb_blaster
# driver but ixo-usb-jtag requires the ftdi driver.
adapter driver usb_blaster
-usb_blaster_vid_pid 0x16C0 0x06AD
-usb_blaster_device_desc "Van Ooijen Technische Informatica"
+usb_blaster vid_pid 0x16C0 0x06AD
+usb_blaster device_desc "Van Ooijen Technische Informatica"
# ixo-usb-jtag is only compatible with the ublast1 protocol implemented via the
# ftdi modes, using ublast2 will cause openocd to hang.
# ixo-usb-jtag is only compatible with the ublast1 protocol implemented via the
# ftdi modes, using ublast2 will cause openocd to hang.
-usb_blaster_lowlevel_driver ftdi
+usb_blaster lowlevel_driver ftdi
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)