Found by grepping for pointer casts.
Change-Id: Ibd8f22a9e9ca71459ba0bedc8447a3623d0e4184
Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
Reviewed-on: http://openocd.zylin.com/1773
Tested-by: jenkins
Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
};
retval = target_write_buffer(target, write_algorithm->address,
};
retval = target_write_buffer(target, write_algorithm->address,
- sizeof(stm32x_flash_write_code), (uint8_t *)stm32x_flash_write_code);
+ sizeof(stm32x_flash_write_code), stm32x_flash_write_code);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
return retval;
int user_data = optionbyte;
int user_data = optionbyte;
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_ERROR, 1))
+ if (optionbyte >> OPT_ERROR & 1)
command_print(CMD_CTX, "Option Byte Complement Error");
command_print(CMD_CTX, "Option Byte Complement Error");
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_READOUT, 1))
+ if (optionbyte >> OPT_READOUT & 1)
command_print(CMD_CTX, "Readout Protection On");
else
command_print(CMD_CTX, "Readout Protection Off");
command_print(CMD_CTX, "Readout Protection On");
else
command_print(CMD_CTX, "Readout Protection Off");
/* user option bytes are offset depending on variant */
optionbyte >>= stm32x_info->option_offset;
/* user option bytes are offset depending on variant */
optionbyte >>= stm32x_info->option_offset;
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDWDGSW, 1))
+ if (optionbyte >> OPT_RDWDGSW & 1)
command_print(CMD_CTX, "Software Watchdog");
else
command_print(CMD_CTX, "Hardware Watchdog");
command_print(CMD_CTX, "Software Watchdog");
else
command_print(CMD_CTX, "Hardware Watchdog");
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTOP, 1))
+ if (optionbyte >> OPT_RDRSTSTOP & 1)
command_print(CMD_CTX, "Stop: No reset generated");
else
command_print(CMD_CTX, "Stop: Reset generated");
command_print(CMD_CTX, "Stop: No reset generated");
else
command_print(CMD_CTX, "Stop: Reset generated");
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_RDRSTSTDBY, 1))
+ if (optionbyte >> OPT_RDRSTSTDBY & 1)
command_print(CMD_CTX, "Standby: No reset generated");
else
command_print(CMD_CTX, "Standby: Reset generated");
if (stm32x_info->has_dual_banks) {
command_print(CMD_CTX, "Standby: No reset generated");
else
command_print(CMD_CTX, "Standby: Reset generated");
if (stm32x_info->has_dual_banks) {
- if (buf_get_u32((uint8_t *)&optionbyte, OPT_BFB2, 1))
+ if (optionbyte >> OPT_BFB2 & 1)
command_print(CMD_CTX, "Boot: Bank 0");
else
command_print(CMD_CTX, "Boot: Bank 1");
command_print(CMD_CTX, "Boot: Bank 0");
else
command_print(CMD_CTX, "Boot: Bank 1");
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)