Zachary T Welch [Tue, 20 Oct 2009 02:59:02 +0000 (19:59 -0700)]
Improve Makefile rules for XScale debug handler; fixes 'make distcheck'.
Redirect 'Slash' NIL [Tue, 20 Oct 2009 00:55:40 +0000 (17:55 -0700)]
MinGW: always use "-D__USE_MINGW_ANSI_STDIO"
This is unfortunately needed to make stdio work like OpenOCD expects -- matching
the ANSI-C standard, instead of MS-Windows.
I tested it in both MinGW-W64 on Vista 64 and MinGW-W32 on XP, and I don't
see any adverse effects to enabling it for all MinGW versions.
Redirect 'Slash' NIL [Tue, 20 Oct 2009 00:48:19 +0000 (17:48 -0700)]
MinGW: use WinSock2
After reading a bit further, it appears that ws2_32 (Windows Sockets 2)
is included in all versions of Windows and backwards compatible with
wsock32, at least according to
http://msdn.microsoft.com/en-us/library/ms740673%28VS.85%29.aspx.
Only Win95 seems to require a manual installation; is not a big deal.
So I think we can drop this whole business of detecting 64 bit MinGW and
just use -lws2_32 for all MinGW platforms.
David Brownell [Mon, 19 Oct 2009 21:45:43 +0000 (14:45 -0700)]
Doc: jtag_init must validate scan chain too
Same requirement as like init_reset, and for the same reason:
we need to start with a known and working state.
Nicolas Pitre [Mon, 19 Oct 2009 19:49:46 +0000 (15:49 -0400)]
fix single step of bx instruction going into Thumb mode
Without this fix, the following code cannot be single stepped:
add ip, pc, #1
bx ip
[thumb code here]
David Brownell [Mon, 19 Oct 2009 16:53:45 +0000 (09:53 -0700)]
Ignore openocd.exe for "git status"
Redirect 'Slash' NIL [Mon, 19 Oct 2009 16:49:34 +0000 (09:49 -0700)]
corrective fix for MinGW GNU C99 printf compliance
Compilation on cygwin, using gcc v3 with option -mno-cygwin,
currently produces a large number of the following warnings:
warning: `gnu_printf' is an unrecognized format function type
These have been introduced with the recent MinGW GNU C99 printf
compliance patch, as gnu_printf was only introduced with gcc v4.4
and is not recognized with earlier versions.
The attached fix adds gcc version detection to the previous patch
to avoid the problem.
oyvind [Mon, 19 Oct 2009 13:16:42 +0000 (15:16 +0200)]
Sync with official Jim Tcl repository.
oyvind [Mon, 19 Oct 2009 13:08:52 +0000 (15:08 +0200)]
Switch from svn to git version string handling.
Dean Glazeski [Sun, 18 Oct 2009 20:26:38 +0000 (22:26 +0200)]
SDRAM and clock configuration for the SAM9-L9260 board from Olimex
Redirect 'Slash' NIL [Sun, 18 Oct 2009 05:18:38 +0000 (22:18 -0700)]
safer conversion to HANDLER on MinGW-W64
Assign to "intptr_t", which on some versions of MS-Windows
will widen the variable; then cast to HANDLE.
David Brownell [Sun, 18 Oct 2009 00:50:23 +0000 (17:50 -0700)]
Ignore two more generated files
On Windows the name is "bin2char.exe".
All operating systems now have "xscale_handler.h".
Redirect 'Slash' NIL [Sun, 18 Oct 2009 00:47:52 +0000 (17:47 -0700)]
More MinGW C99 printf compliance
Passing "--std=gun99" is unfortunately not sufficient to make current
MinGW compilers conform with respect to checking printf format strings.
(The C runtime seems not to have problems.)
Fix by using a "gnu_printf" format specifier not "printf".
Redirect \"Slash\" NIL [Sat, 17 Oct 2009 19:15:13 +0000 (12:15 -0700)]
jim-eventloop for MinGW-w64
Use JIM_WIDE_MODIFIER for the sscanf format, and apply it for MINGW32 as
well as other Windows environments. (Microsoft doesn't conform to the
C99 standard, and uses "%I64d" not "%lld" for "long long".)
NB: __MINGW32__ should work on both w32 and w64,.
David Brownell [Sat, 17 Oct 2009 19:14:19 +0000 (12:14 -0700)]
build tweak for bin2char
Work better when building outside the source tree.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 16 Oct 2009 20:52:40 +0000 (13:52 -0700)]
xscale: better fix for debug_handler.bin
Generate a C struct with the data, and use that, instead of an
assembly language file. The assembly language causes issues on
Darwin and MS-Windows, which don't necessarily use GNU AS; or
if they do, don't necessarily use its ELF syntax.
It's also better in two other ways: fewer global symbols; and
the init-time size check gets optimized away at compile time.
(Unless it fails, in which case bigger chunks of the file vanish.)
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 15 Oct 2009 03:24:31 +0000 (20:24 -0700)]
another portability update
Just use "%p" instead of consing up some integral type for pointer printf.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 15 Oct 2009 03:04:33 +0000 (20:04 -0700)]
portability updates
Based on some patches from <redirect.slash.nil@gmail.com>
for preliminary Win64 compilation. More such updates are
needed, but they need work. Compile tested on 64 and 32 bit
Linuxes, and Cygwin.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Wed, 14 Oct 2009 22:18:00 +0000 (15:18 -0700)]
doc updates to match "help" better
This makes the documentation a closer match to "help" output:
- "pathmove" somehow was not documented in the User's Guide
- "jtag_nsrst_assert_width" and "jtag_ntrst_assert_width"
are new; both needed descriptions.
- Removed two undocumented and fairly useless script mechanisms:
* production/production_info/production_test ... using it,
requires replacing everything; so having it adds no value.
* cpu ... way out of date; hopeless to keep that current
Note that anyone using that "production" stuff already defines
their own procedures, and can keep using them with no change.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Wookey [Wed, 14 Oct 2009 13:27:41 +0000 (14:27 +0100)]
Fw: [PATCH] OpenRD board configuration
Ofrwarded from Ron, who's not subscribed.
----- Forwarded message from Ron <ron@debian.org> -----
From: Ron <ron@debian.org>
Date: Wed, 14 Oct 2009 04:50:17 +1030
To: wookey@debian.org
Subject: [PATCH] OpenRD board configuration
X-Spam-Status: No, score=-3.6 required=4.5 tests=BAYES_00,RCVD_IN_DNSWL_LOW
autolearn=ham version=3.2.5
This piggybacks on the 'sheevaplug' layout which uses the same Kirkwood SoC.
Signed-off-by: Ron Lee <ron@debian.org>
Øyvind Harboe [Wed, 14 Oct 2009 10:01:52 +0000 (12:01 +0200)]
S29WS-N CFI query fix is to try 0x555 if 0x55 fails.
Øyvind Harboe [Wed, 14 Oct 2009 09:14:04 +0000 (11:14 +0200)]
Work in progress on arm11 reset. Assert srst.
Øyvind Harboe [Wed, 14 Oct 2009 08:34:41 +0000 (10:34 +0200)]
iMX target config script's ported from Freescale BSP.
David Brownell [Wed, 14 Oct 2009 07:32:42 +0000 (09:32 +0200)]
Fix problems building xscale_debug.S
David Brownell [Wed, 14 Oct 2009 09:00:34 +0000 (02:00 -0700)]
omap2420.cfg updates
Remove ircapture/mask attributes. Add "srst_nogate".
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Lennert Buytenhek [Tue, 13 Oct 2009 20:48:18 +0000 (22:48 +0200)]
fix detection of PLD instructions
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Lennert Buytenhek [Tue, 13 Oct 2009 18:27:03 +0000 (20:27 +0200)]
fix pass_condition() LE condition code check
The LE check is obviously buggy (as easily triggered during some
testing), but I didn't audit the rest of the cases.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Tue, 13 Oct 2009 17:55:24 +0000 (10:55 -0700)]
cosmetic cleanup in TMS tables
Cleanup comments and layout/whitespace in the TMS tables.
Table contents stayed the same (ignoring whitespace).
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Yauheni Kaliuta [Tue, 13 Oct 2009 17:00:46 +0000 (20:00 +0300)]
Cleanup: nuke trailling whitespaces
Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>
Yauheni Kaliuta [Sun, 11 Oct 2009 15:27:27 +0000 (18:27 +0300)]
Do not replace virt2phys with the default one if it was assigned
Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>
Øyvind Harboe [Tue, 13 Oct 2009 11:44:15 +0000 (13:44 +0200)]
Retired gdb_attach. gdb-detach event covers this functionality.
Øyvind Harboe [Tue, 13 Oct 2009 11:13:29 +0000 (13:13 +0200)]
Missing type for eCos.
Øyvind Harboe [Tue, 13 Oct 2009 10:22:23 +0000 (12:22 +0200)]
Fix warning.
Øyvind Harboe [Tue, 13 Oct 2009 10:06:55 +0000 (12:06 +0200)]
Delete commented out code. Add a bit of error checking.
Øyvind Harboe [Tue, 13 Oct 2009 10:02:09 +0000 (12:02 +0200)]
arm11 seems to gate JTAG when srst is asserted
Øyvind Harboe [Tue, 13 Oct 2009 09:29:05 +0000 (11:29 +0200)]
Propagate error from assert, deassert and halt on tcl target object.
David Brownell [Tue, 13 Oct 2009 08:21:24 +0000 (01:21 -0700)]
xscale: stackframe corruption bugfix
Resolve a "FIX" comment; yes that was superfluous given that the
JTAG core does that check by default. It was also buggy since it
wrote to a stack frame that went away before the write happened!!
Other fixes: remove pointless malloc(); zero-init scan_field_t
values wherever they appear; whitespace scrub; spelling fix.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Mon, 12 Oct 2009 13:25:00 +0000 (15:25 +0200)]
More error propagation fixes.
Øyvind Harboe [Mon, 12 Oct 2009 13:13:44 +0000 (15:13 +0200)]
arm11 burst writes are now only enabled for writes larger than 1 word. Single word writes are frequently used from reset init scripts to non-memory peripherals.
Wookey [Mon, 12 Oct 2009 13:12:35 +0000 (15:12 +0200)]
Xilinx xcr3256.cfg basic config script
Øyvind Harboe [Mon, 12 Oct 2009 12:21:38 +0000 (14:21 +0200)]
Retire arm11 no_increment. Intended for future expansion to read/write to ports. New arm11 commands would have to be added to exploit it.
Øyvind Harboe [Mon, 12 Oct 2009 12:10:49 +0000 (14:10 +0200)]
Propagate wDTR/rDTR failure immediately, otherwise it's followed up by timeout errors.
Øyvind Harboe [Mon, 12 Oct 2009 12:09:10 +0000 (14:09 +0200)]
Fix warning and improve error message upon burst transfer failure
Øyvind Harboe [Mon, 12 Oct 2009 12:08:29 +0000 (14:08 +0200)]
burst writes work fine. clean up junk.
Øyvind Harboe [Mon, 12 Oct 2009 09:57:59 +0000 (11:57 +0200)]
Fix bogus 'transfer errors' with arm11 'memwrite burst enable'. A regression introduced in
b8103660fa36a77158bd77379572c09913d85c00
David Brownell [Mon, 12 Oct 2009 09:39:18 +0000 (02:39 -0700)]
simplify XScale debug handler installation
Load the XScale debug handler from the read-only data section
instead of from a separate file that can get lost or garbaged.
This eliminates installation and versioning issues, and also
speeds up reset handling a bit.
Plus some minor bits of cleanup related to loading that handler:
comments about just what this handler does, and check fault codes
while writing it into the mini-icache.
The only behavioral changes should be cleaner failure modes after
errors during handler loading, and being a bit faster.
NOTE: presumes GNU assembly syntax, with ".incbin"; and ELF,
because of the syntax of the ".size" directive.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Mon, 12 Oct 2009 09:39:01 +0000 (02:39 -0700)]
more xscale cleanup (mostly removing JTAG hooks)
Streamline/shrink some needless JTAG stuff:
- Use #defines for the JTAG instructions; they can't ever change
- Remove an unused (!) shadow of tap->ir_length
- Stop using a copy of target->tap
- Don't bother saving the variant after sanity checking ir_length
Also, make target_create() work as on other targets: build the
register cache later, making init_target() no longer be a NOP.
Handle malloc failure; remove a comment that was obsoleted by the
not-so-new target syntax.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Mon, 12 Oct 2009 07:28:56 +0000 (09:28 +0200)]
Merge commit 'origin/master'
Øyvind Harboe [Mon, 12 Oct 2009 07:27:27 +0000 (09:27 +0200)]
If halt times out, stop GDB. Allows e.g. manual reset via monitor commands.
Øyvind Harboe [Mon, 12 Oct 2009 07:25:08 +0000 (09:25 +0200)]
Supply default reset_config statement to make target scripts useful standalone and provide sensible default
David Brownell [Sun, 11 Oct 2009 17:35:52 +0000 (10:35 -0700)]
xscale_load_ic cleanup
Remove unused and deprecated (in the arch spec) mode for loading
code into the *main* icache (vs the "mini" icache). Disable some
extremely noisy (and rarely useful) low-level debug messages
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 11 Oct 2009 17:35:28 +0000 (10:35 -0700)]
xscale.c cleanup
Declare almost everything as static.
Move stuff to remove most forward references.
Remove most forward declarations.
Warn if the unimplemented register functions get called.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 11 Oct 2009 17:06:08 +0000 (10:06 -0700)]
xscale bugfix to handler loading
Just fill out the rest of the cache line with NOPs; don't change
the record of how much data we consumed. Otherwise the count of
how much data is left can roll over from positive to negative
("VERY positive") and skip the loop termination of zero.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sun, 11 Oct 2009 09:52:00 +0000 (02:52 -0700)]
xscale minor cleanup
Add a header comment referencing useful XScale specs.
Make most data static, and the tables readonly.
Scrub extra blank lines.
Return fault codes from one routine.
Remove a needless NOP methood.
(BUGFIX) When we update R0, mark R0 as dirty/valid ... not R15/PC!
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Sat, 10 Oct 2009 18:32:39 +0000 (11:32 -0700)]
printf format warning fixes
Observed on a Cygwin build.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Wookey [Sat, 10 Oct 2009 07:08:06 +0000 (09:08 +0200)]
Fix reset delays and tinker with ID's
David Brownell [Fri, 9 Oct 2009 22:51:16 +0000 (15:51 -0700)]
tweak new "translating ..." text
Fix formatting and layout bugs in the new "translating configuration
files" bit. Make it a section within the chapter about config files.
Add a crossreference.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 9 Oct 2009 19:52:42 +0000 (12:52 -0700)]
add documentation about reset customization
We added two overridable procedures; document them, and the
two jtag arp_* operations they necessarily expose.
Update the comment about the jtag_init_reset() routine; it's
been obsolete for as long as it's had SRST support.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Øyvind Harboe [Fri, 9 Oct 2009 08:31:40 +0000 (10:31 +0200)]
Stop debug session if halt fails
Øyvind Harboe [Fri, 9 Oct 2009 08:00:05 +0000 (10:00 +0200)]
ARM11 error checking
Øyvind Harboe [Fri, 9 Oct 2009 07:14:27 +0000 (09:14 +0200)]
Merge commit 'origin/master'
Øyvind Harboe [Fri, 9 Oct 2009 07:03:53 +0000 (09:03 +0200)]
Added tip in documentation on how to translate quirky syntax
David Brownell [Fri, 9 Oct 2009 06:51:50 +0000 (23:51 -0700)]
make PXA255 targets enumerate sort-of-OK
Startup now mostly works, except that the initial target state
is "unknown" ... previously, it refused to even start.
Getting that far required fixing the ircapture value (which
can never have been correct!) and the default JTAG clock rate,
then providing custom reset script.
The "reset" command is still iffy. DCSR updates, and loading
the debug handler, report numerous DR/IR capture failures.
But once that's done, "poll" reports that the CPU is halted
(which it shouldn't be, this was "reset run"!), due to the
rather curious reason "target-not-halted".
Summary: you still can't debug these parts, but it's closer.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 9 Oct 2009 06:51:50 +0000 (23:51 -0700)]
add overridable Tcl "init_reset"
This abstracts the "jtag arp_init-reset" call into a method
called from OpenOCD startup and reset processing.
Platforms which have different requirements for how such hard
resets must be performed can now override "init_reset" instead
of needing to rebuild custom hacked versions of the server.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Fri, 9 Oct 2009 06:51:50 +0000 (23:51 -0700)]
minor JTAG init messaging tweaks
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Rabeeh Khoury [Fri, 9 Oct 2009 00:10:52 +0000 (17:10 -0700)]
Function to flash SheevaPlug u-boot sectors
This function is used by the SheevaPlug installer to flash the
erase and re-flash the U-Boot environment in the NAND Flash.
David Brownell [Thu, 8 Oct 2009 20:15:18 +0000 (13:15 -0700)]
initial builds of OSK5912 boards need srst_pulls_trst
This is clearly noted in the hardware spec (section 5.2.3); it
works around a chip erratum: "If the MPU_RESET signal is used,
it may cause the EMIFS bus to lock."
I seem to have a board with such an initial build. The chip
is labeled XOMAP. Presumably, parts without that "X" prefix
(eXperimental) resolve this.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 8 Oct 2009 18:14:00 +0000 (11:14 -0700)]
prevent abort via polling during jtag_reset
Observed:
openocd: core.c:318: jtag_checks: Assertion `jtag_trst == 0' failed.
The issue was that nothing disabled background polling during calls
from the TCL shell to "jtag_reset 1 1". Fix by moving the existing
poll-disable mechanism to the JTAG layer where it belongs, and then
augmenting it to always pay attention to TRST and SRST.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 8 Oct 2009 16:16:01 +0000 (09:16 -0700)]
Stop ignoring most scan chain validation errors
Among other things this causes startup errors to kick in the
fallback "reset harder" logic during server startup. Comments
are also updated a bit, explaining what the various error paths
signify (in at least my observation).
There's one class of validation error that we can still plausibly
ignore: when wrong IDCODE values are observed.
This change seems to have helped make an OMAP5912 behave much
more reliably. There's still some post-reset flakiness, but
it's unrelated to scan verification.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 8 Oct 2009 14:32:47 +0000 (07:32 -0700)]
Merge branch 'master' of ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
Øyvind Harboe [Thu, 8 Oct 2009 13:43:51 +0000 (15:43 +0200)]
Testing committing changes to .gitignore to ignore more build output
Øyvind Harboe [Thu, 8 Oct 2009 13:27:09 +0000 (15:27 +0200)]
Add .project to .gitignore
Øyvind Harboe [Thu, 8 Oct 2009 12:53:25 +0000 (14:53 +0200)]
Stop GDB when polling fails, srst assert or powerdropout is detected
Øyvind Harboe [Thu, 8 Oct 2009 11:56:57 +0000 (13:56 +0200)]
Update copyright statements. Make it easier to sync with Jim Tcl
David Brownell [Thu, 8 Oct 2009 06:29:18 +0000 (23:29 -0700)]
make OMAP5912 resets more reliable
Without some extra delay after releasing SRST, we seemed to
be trying to talk to the TAP before it was ready to respond.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
John Rigby [Thu, 8 Oct 2009 04:19:32 +0000 (22:19 -0600)]
iMX25 target support
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
David Brownell [Thu, 8 Oct 2009 02:11:37 +0000 (19:11 -0700)]
Houston, we have Mirror!
David Brownell [Thu, 8 Oct 2009 00:14:58 +0000 (17:14 -0700)]
Merge branch 'master' of ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
dbrownell [Thu, 8 Oct 2009 00:13:50 +0000 (00:13 +0000)]
Change most in-tree references from SVN to GIT.
Also, talk about "mainline" not "trunk".
The release.txt and release.sh files need more updates.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2825
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Wed, 7 Oct 2009 19:02:21 +0000 (19:02 +0000)]
Force sane SRST and TRST initialization
At least some FT2232 based adapters don't necessarily come up
in the expected state, with SRST and TRST disabled. Since
other adapters could suffer the same problem, let's avoid
needing to patch every driver and just force *all* adapters
to initialize those values properly at server startup.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2824
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Wed, 7 Oct 2009 18:51:11 +0000 (18:51 +0000)]
Better fix for TAPs violating the JTAG spec for IR-Capture.
Instead of just assuming all IDCODE-deprived TAPs violate the
JTAG spec (they don't!), just require TAPs with such problems
to be declared with proper ircapture/irmask values. Example,
with mask and value of zero.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2823
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Wed, 7 Oct 2009 17:30:51 +0000 (17:30 +0000)]
Remove much #ifdeffery around _DEBUG_JTAG_IO_ usage.
Have DEBUG_JTAG_IO() always trigger necessary warnings.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2822
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Wed, 7 Oct 2009 16:28:44 +0000 (16:28 +0000)]
buildfix
git-svn-id: svn://svn.berlios.de/openocd/trunk@2821
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
David Brownell [Wed, 7 Oct 2009 16:16:39 +0000 (09:16 -0700)]
Merge branch 'master' of ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
dbrownell [Wed, 7 Oct 2009 16:15:21 +0000 (16:15 +0000)]
Remove pointless "target library" chapter.
It had a very little bit of content; move that to the more extensive
chapter on config file guidelines, and give more current "ls" output
to show the available library code.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2820
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Wed, 7 Oct 2009 15:56:11 +0000 (15:56 +0000)]
Note bug in handling of variables through command line parameters.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2819
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Wed, 7 Oct 2009 15:31:33 +0000 (15:31 +0000)]
Updates for "reset_config":
- revert to previous default: don't talk JTAG during SRST
- add "srst_nogates" flag, the converse of "srst_gates_jtag"
- with no args, display the current configuration
And update the User's Guide text with bullet lists to be a bit more clear.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2818
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 7 Oct 2009 12:21:58 +0000 (12:21 +0000)]
first stab at imx35 reset init script
git-svn-id: svn://svn.berlios.de/openocd/trunk@2817
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 7 Oct 2009 12:20:06 +0000 (12:20 +0000)]
remove recrusive reset invocation from reset init callback
git-svn-id: svn://svn.berlios.de/openocd/trunk@2816
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 7 Oct 2009 12:19:17 +0000 (12:19 +0000)]
add timeouts and fix syntax error handling of mrc/mcr commands.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2815
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 7 Oct 2009 12:05:37 +0000 (12:05 +0000)]
add timeouts and fix syntax error handling of mrc/mcr commands.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2814
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 7 Oct 2009 11:03:56 +0000 (11:03 +0000)]
increase pause before reboot so web interface remains responsive when issuing a reboot of zy1000
git-svn-id: svn://svn.berlios.de/openocd/trunk@2813
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 7 Oct 2009 11:03:01 +0000 (11:03 +0000)]
Do not check ir capture if there is no IDCODE
git-svn-id: svn://svn.berlios.de/openocd/trunk@2812
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
oharboe [Wed, 7 Oct 2009 06:53:44 +0000 (06:53 +0000)]
1.55 snapshot
git-svn-id: svn://svn.berlios.de/openocd/trunk@2810
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Wed, 7 Oct 2009 05:43:05 +0000 (05:43 +0000)]
Change version labels to work better with GIT
- The guess-rev.sh script is now a tweaked version of "setlocalversion" as
seen in Linux, U-Boot, and various other projects. When it finds source
control support (git, hg, svn) it uses IDs from there. Else (specific
to this project) it reports itself as "-snapshot", e.g. from gitweb.
I verified this new "guess-rev.sh" script runs under Cygwin.
- Also update the generic version strings to be like "0.3.0-dev" (during
development) instead of the very long "0.3.0-in-development". These also
show up in the PDF docs. For better tracking, we might eventually change
these strings to include the version IDs too.
- Change the startup banner version strings so they include the guess-rev
output. Development and release versions with GIT will be like
Open On-Chip Debugger
0.3.0-dev-00282-g7191a4f-dirty (2009-10-05-20:57)
Open On-Chip Debugger 0.3.0 (2009-10-05-20:57)
instead of the previous SVN-specific (even when using git-svn!)
Open On-Chip Debugger 0.3.0-in-development (2009-10-05-01:39) svn:exported
Open On-Chip Debugger 0.3.0 (2009-10-05-01:39) Release
git-svn-id: svn://svn.berlios.de/openocd/trunk@2809
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
David Brownell [Tue, 6 Oct 2009 22:58:06 +0000 (15:58 -0700)]
Merge branch 'master' of ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
dbrownell [Tue, 6 Oct 2009 22:56:52 +0000 (22:56 +0000)]
Add basic support for DM6446 EVM board.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2808
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Tue, 6 Oct 2009 22:55:46 +0000 (22:55 +0000)]
Dragonite has the same EICE affliction as feroceon.
From: Nicolas Pitre <nico@fluxnic.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@2807
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
dbrownell [Tue, 6 Oct 2009 22:55:04 +0000 (22:55 +0000)]
Dragonite target script
From: Nicolas Pitre <nico@fluxnic.net>
git-svn-id: svn://svn.berlios.de/openocd/trunk@2806
b42882b7-edfa-0310-969c-
e2dbd0fdcd60
David Brownell [Tue, 6 Oct 2009 15:29:23 +0000 (08:29 -0700)]
Merge branch 'master' of ssh://dbrownell@openocd.git.sourceforge.net/gitroot/openocd/openocd
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)