tcl/target: Add Geehy APM32F1x config

Tested with APM32F103CBT6 using JTAG and SWD transport. All flash
operations, including sector and device protection, work as expected.

Change-Id: Ibefe1a65d710aea87b86ab7ff8a4153512a0ea4f
Signed-off-by: Marc Schink <dev@zapb.de>
Reviewed-on: https://review.openocd.org/c/openocd/+/8017
Tested-by: jenkins
Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

diff --git a/tcl/target/geehy/apm32f1x.cfg b/tcl/target/geehy/apm32f1x.cfg
new file mode 100644 (file)
index 0000000..dc42e06
--- /dev/null
+++ b/tcl/target/geehy/apm32f1x.cfg
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+#
+# Geehy APM32F1x target
+#
+# https://global.geehy.com/MCU
+#
+
+#
+# APM32F1x devices support JTAG and SWD transport.
+#
+source [find target/swj-dp.tcl]
+
+if { [info exists CHIPNAME] } {
+   set _CHIPNAME $CHIPNAME
+} else {
+   set _CHIPNAME apm32f1x
+}
+
+# Work-area is a space in RAM used for flash programming, by default use 4 KiB.
+if { [info exists WORKAREASIZE] } {
+   set _WORKAREASIZE $WORKAREASIZE
+} else {
+   set _WORKAREASIZE 0x1000
+}
+
+if { [info exists CPUTAPID] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+   if { [using_jtag] } {
+      set _CPUTAPID 0x4ba00477
+   } {
+      set _CPUTAPID 0x2ba01477
+   }
+}
+
+swj_newdap $_CHIPNAME cpu -irlen 4 -expected-id $_CPUTAPID
+dap create $_CHIPNAME.dap -chain-position $_CHIPNAME.cpu
+
+if {[using_jtag]} {
+   jtag newtap $_CHIPNAME bs -irlen 5
+}
+
+set _TARGETNAME $_CHIPNAME.cpu
+target create $_TARGETNAME cortex_m -endian little -dap $_CHIPNAME.dap
+
+$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0
+
+set _FLASHNAME $_CHIPNAME.flash
+flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
+
+adapter speed 1000
+
+if {![using_hla]} {
+   # if srst is not fitted use SYSRESETREQ to perform a soft reset.
+   cortex_m reset_config sysresetreq
+}